|
|
|
|
|
|
IETF RFC 9661
Last modified on Friday, September 27th, 2024
 Permanent link to RFC 9661
 Search GitHub Wiki for RFC 9661
 Show other RFCs mentioning RFC 9661
Internet Engineering Task Force (IETF) K. Murchison
Request for Comments: 9661 Fastmail
Category: Standards Track September 2024
ISSN: 2070-1721
The JSON Meta Application Protocol (JMAP) for Sieve Scripts
 Abstract
This document specifies a data model for managing Sieve scripts on a
server using the JSON Meta Application Protocol (JMAP). Clients can
use this protocol to efficiently search, access, organize, and
validate Sieve scripts.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/RFC 9661.
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Revised BSD License text as described in Section 4.e of the
Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
Table of Contents
1. Introduction
1.1. Notational Conventions
1.2. Addition to the Capabilities Object
1.2.1. urn:ietf:params:jmap:sieve
1.2.2. Example
2. Sieve Scripts
2.1. Sieve Script Properties
2.2. Sieve Script Content
2.3. SieveScript/get
2.3.1. Examples
2.4. SieveScript/set
2.4.1. Examples
2.5. SieveScript/query
2.6. SieveScript/validate
3. Quotas
4. Compatibility with JMAP Vacation Response
5. Security Considerations
6. IANA Considerations
6.1. JMAP Capability Registration for "sieve"
6.2. JMAP Data Type Registration for "SieveScript"
6.3. JMAP Error Codes Registry
6.3.1. invalidSieve
6.3.2. sieveIsActive
7. References
7.1. Normative References
7.2. Informative References
Acknowledgments
Author's Address
1. Introduction
The JSON Meta Application Protocol (JMAP) [RFC 8620] is a generic
protocol for synchronizing data, such as mail, calendars, or
contacts, between a client and a server. It is optimized for mobile
and web environments, and it aims to provide a consistent interface
to different data types.
This specification defines a data model for managing Sieve scripts
[RFC 5228] on a server using JMAP. The data model is designed to
allow a server to provide consistent access to the same scripts via
ManageSieve [RFC 5804] as well as JMAP.
1.1. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC 2119] [RFC 8174] when, and only when, they appear in all
capitals, as shown here.
Type signatures, examples, and property descriptions in this document
follow the conventions established in Section 1.1 of [RFC 8620]. This
document also uses data types and terminology established in
Sections 1.2 through 1.6 of [RFC 8620].
The term "SieveScript" (with this specific capitalization) is used to
refer to the data type defined in Section 2 and instances of this
data type used throughout this document. Servers MUST support all
properties specified for the data type defined in this document.
For brevity, JMAP API examples (see Section 3 of [RFC 8620]) only show
the "methodCalls" property of the "Request" object and the
"methodResponses" property of the "Response" object. All other
examples are shown using the HTTP/1.1 protocol [RFC 9112].
1.2. Addition to the Capabilities Object
The "capabilities" object is returned as part of the JMAP Session
object; see [RFC 8620], Section 2. This document defines one
additional capability URI.
1.2.1. urn:ietf:params:jmap:sieve
The urn:ietf:params:jmap:sieve URI represents support for the
SieveScript data type and associated API methods. The value of this
property in the JMAP Session "capabilities" property is an object
that MUST contain the following information on server capabilities:
*implementation*: String
The name and version of the Sieve implementation.
The value of this property in an account's "accountCapabilities"
property is an object that MUST contain the following information on
per-account server capabilities:
*maxSizeScriptName*: UnsignedInt
The maximum length, in octets, allowed for the name of a
SieveScript. For compatibility with ManageSieve, this MUST be at
least 512 (up to 128 Unicode characters).
*maxSizeScript*: UnsignedInt|null
The maximum size (in octets) of a Sieve script the server is
willing to store for the user, or null for no limit.
*maxNumberScripts*: UnsignedInt|null
The maximum number of Sieve scripts the server is willing to store
for the user, or null for no limit.
*maxNumberRedirects*: UnsignedInt|null
The maximum number of Sieve "redirect" actions a script can
perform during a single evaluation, or null for no limit. Note
that this is different from the total number of "redirect" actions
a script can contain.
*sieveExtensions*: String[]
A list of case-sensitive Sieve capability strings (as listed in
the Sieve "require" action; see [RFC 5228], Section 3.2) indicating
the extensions supported by the Sieve engine.
*notificationMethods*: String[]|null
A list of URI scheme parts [RFC 3986] for notification methods
supported by the Sieve "enotify" extension [RFC 5435], or null if
the extension is not supported by the Sieve engine.
*externalLists*: String[]|null
A list of URI scheme parts [RFC 3986] for externally stored list
types supported by the Sieve "extlists" extension [RFC 6134], or
null if the extension is not supported by the Sieve engine.
1.2.2. Example
This example JMAP Session object shows a user that has access to
their own Sieve scripts with support for a few Sieve extensions:
{
"capabilities": {
"urn:ietf:params:jmap:core": {
...
},
"urn:ietf:params:jmap:mail": {},
"urn:ietf:params:jmap:quota": {},
"urn:ietf:params:jmap:blob": {},
"urn:ietf:params:jmap:sieve": {
"implementation": "ACME Email Filtering"
},
"urn:ietf:params:jmap:vacationresponse": {},
...
},
"accounts": {
"ken": {
"name": "ken@example.com",
"isPersonal": true,
"isReadOnly": false,
"accountCapabilities": {
"urn:ietf:params:jmap:core": {},
"urn:ietf:params:jmap:quota": {},
"urn:ietf:params:jmap:mail": {
...
},
"urn:ietf:params:jmap:blob": {
"supportedTypeNames": [
"Email"
"SieveScript",
...
],
...
},
"urn:ietf:params:jmap:sieve": {
"maxSizeScriptName": 512,
"maxSizeScript": 65536,
"maxNumberScripts": 5,
"maxNumberRedirects": null,
"sieveExtensions": [
"fileinto",
"imap4flags",
"enotify",
...
],
"notificationMethods": [
"mailto"
],
"externalLists": null,
},
"urn:ietf:params:jmap:vacationresponse": {},
...
},
...
}
},
"primaryAccounts": {
"urn:ietf:params:jmap:mail": "ken",
"urn:ietf:params:jmap:sieve": "ken",
"urn:ietf:params:jmap:vacationresponse": "ken",
...
},
"username": "ken@example.com",
"apiUrl": "/jmap/",
"downloadUrl":
"/jmap/download/{accountId}/{blobId}/{name}?accept={type}",
"uploadUrl": "/jmap/upload/{accountId}/",
...
}
2. Sieve Scripts
A "SieveScript" object represents a single Sieve script [RFC 5228] for
filtering email messages at the time of final delivery.
2.1. Sieve Script Properties
A "SieveScript" object has the following properties:
*id*: Id (immutable; server-set)
The id of the script.
*name*: String|null (optional; default is server dependent)
User-visible name for the SieveScript. If non-null, this MUST be
a Net-Unicode string [RFC 5198] of at least 1 character in length,
subject to the maximum size given in the "capability" object.
For compatibility with ManageSieve, servers MUST reject names that
contain any of the following Unicode characters: U+0000-U+001F,
U+007F-U+009F, U+2028, or U+2029.
Servers MAY reject names that violate server policy (e.g., names
containing a slash (/)).
The name MUST be unique among all SieveScripts within an account.
*blobId*: Id
The id of the blob containing the raw octets of the script.
*isActive*: Boolean (server-set; default: false)
Indicator that the SieveScript is actively filtering incoming
messages.
A user may have at most one active script. The SieveScript/set
method (Section 2.4) is used for changing the active script or
disabling Sieve processing.
2.2. Sieve Script Content
A script MUST be UTF-8 content [RFC 3629] of at least 1 character in
length, subject to the syntax of Sieve [RFC 5228]. A script MUST NOT
contain any "require" statement(s) mentioning Sieve capability
strings not present in the "capability" object (Section 1.2.1). Note
that if the Sieve "ihave" capability string [RFC 5463] is present in
the "capability" object, the script MAY mention unrecognized/
unsupported extensions in the "ihave" test.
Script content is treated as a binary blob and uploaded/downloaded
via the mechanisms provided in Sections 6.1 and 6.2 of [RFC 8620],
respectively, and/or via the JMAP Blob management methods provided in
Sections 4.1 and 4.2 of [RFC 9404], respectively.
Downloading script content via the JMAP downloadUrl or the Blob/get
method provides functionality equivalent to that of the GETSCRIPT
command defined in [RFC 5804].
2.3. SieveScript/get
This is a standard "/get" method as described in [RFC 8620],
Section 5.1. The "ids" argument may be null to fetch all scripts at
once.
This method provides functionality equivalent to that of the
LISTSCRIPTS command defined in [RFC 5804].
2.3.1. Examples
List all scripts:
[
["SieveScript/get", {
"accountId": "ken"
}, "0"]
]
[
[
"SieveScript/get",
{
"state": "1634915373.240633104-120",
"list": [
{
"id": "2d647053-dded-418d-917a-63eda3ac8f7b",
"name": "test1",
"isActive": true,
"blobId": "S7"
}
],
"notFound": [],
"accountId": "ken"
},
"0"
]
]
Download the script content via the JMAP downloadUrl as advertised in
the example in Section 1.2.2:
GET /jmap/download/ken/S7/test1.siv?accept=application/sieve HTTP/1.1
Host: jmap.example.com
Authorization: Basic a2VuOnBhc3N3b3Jk
HTTP/1.1 200 OK
Date: Fri, 22 Oct 2021 15:27:38 GMT
Content-Type: application/sieve; charset=utf-8
Content-Disposition: attachment; filename="test1.siv"
Content-Length: 49
require ["fileinto"];
fileinto "INBOX.target";
Fetch script properties and content in a single JMAP API request
using the JMAP Blob management extension [RFC 9404]:
[
["SieveScript/get", {
"accountId": "ken",
"ids": [ "2d647053-dded-418d-917a-63eda3ac8f7b" ]
}, "0"],
["Blob/get", {
"accountId": "ken",
"#ids": {
"resultOf": "0",
"name": "SieveScript/get",
"path": "/list/*/blobId"
}
}, "1"]
]
[
[
"SieveScript/get",
{
"state": "1634915373.240633104-120",
"list": [
{
"id": "2d647053-dded-418d-917a-63eda3ac8f7b",
"name": "test1",
"isActive": true,
"blobId": "S7"
}
],
"notFound": [],
"accountId": "ken"
},
"0"
],
[
"Blob/get",
{
"list": [
{
"id": "S7",
"data:asText":
"require [\"fileinto\"];\\r\\nfileinto \"INBOX.target\";\\r\\n",
"size": 49
}
],
"notFound": [],
"accountId": "ken"
},
"1"
]
]
2.4. SieveScript/set
This is a standard "/set" method as described in [RFC 8620],
Section 5.3, but with the following additional optional request
arguments:
*onSuccessActivateScript*: Id
The id of the SieveScript to activate if and only if all of the
creations, modifications, and destructions (if any) succeed. (For
references to SieveScript creations, this is equivalent to a
creation-reference, so the id will be the creation id prefixed
with a "#".) The currently active SieveScript (if any) will be
deactivated before activating the specified SieveScript.
If omitted, or if the id is either invalid or nonexistent, it MUST
be ignored, and the currently active SieveScript (if any) will
remain as such.
The id of any activated SieveScript MUST be reported in either the
"created" or "updated" argument in the response as appropriate,
including a value of "true" for the "isActive" property. The id
of any deactivated SieveScript MUST be reported in the "updated"
argument in the response, including a value of "false" for the
"isActive" property.
*onSuccessDeactivateScript*: Boolean
If "true", the currently active SieveScript (if any) will be
deactivated if and only if all of the creations, modifications,
and destructions (if any) succeed. If "false" or omitted, the
currently active SieveScript (if any) will remain as such.
The id of any deactivated SieveScript MUST be reported in the
"updated" argument in the response, including a value of "false"
for the "isActive" property.
If both the "onSuccessActivateScript" and "onSuccessDeactivateScript"
arguments are present in the request, then
"onSuccessDeactivateScript" MUST be processed first. If neither
argument is present in the request, the currently active SieveScript
(if any) will remain as such.
This method provides functionality equivalent to that of the
PUTSCRIPT, DELETESCRIPT, RENAMESCRIPT, and SETACTIVE commands defined
in [RFC 5804].
Script content must first be uploaded as per Section 2.2 prior to
referencing it in a SieveScript/set call.
If the SieveScript cannot be created or updated because it would
result in two SieveScripts with the same name, the server MUST reject
the request with an "alreadyExists" SetError. An "existingId"
property of type "Id" MUST be included on the SetError object with
the id of the existing SieveScript.
If the SieveScript cannot be created or updated because its size
exceeds the "maxSizeScript" limit, the server MUST reject the request
with a "tooLarge" SetError.
If the SieveScript cannot be created because it would exceed the
"maxNumberScripts" limit or would exceed a server-imposed storage
limit, the server MUST reject the request with an "overQuota"
SetError.
The active SieveScript MUST NOT be destroyed unless it is first
deactivated in a separate SieveScript/set method call.
The following extra SetError types are defined:
For "create" and "update":
*invalidSieve*: The SieveScript content violates the Sieve grammar
[RFC 5228], and/or one or more extensions mentioned in the script's
"require" statement(s) are not supported by the Sieve interpreter.
The "description" property on the SetError object SHOULD contain a
specific error message giving at least the line number of the
first error.
For "destroy":
*sieveIsActive*: The SieveScript is active.
2.4.1. Examples
Upload a script requiring the Imap4Flags Extension [RFC 5232] using
the JMAP uploadUrl as advertised in the example in Section 1.2.2:
POST /jmap/upload/ken/ HTTP/1.1
Host: jmap.example.com
Authorization: Basic a2VuOnBhc3N3b3Jk
Content-Type: application/sieve
Content-Length: 98
require "imapflags";
if address :is ["To", "Cc"] "jmap@ietf.org" {
setflag "\\Flagged";
}
HTTP/1.1 201 Created
Date: Thu, 10 Dec 2020 17:14:31 GMT
Content-Type: application/json; charset=utf-8
Content-Length: 171
{
"accountId": "ken",
"blobId": "Gabcc83e44a6e19991c4568d0b94e1767c83dd123",
"type": "application/sieve"
"size": 98
}
Create and activate a script using the uploaded blob. Note that the
response shows that an existing active script has been deactivated in
lieu of the newly created script being activated.
[
["SieveScript/set", {
"accountId": "ken",
"create": {
"A": {
"name": null,
"blobId": "Gabcc83e44a6e19991c4568d0b94e1767c83dd123"
}
},
"onSuccessActivateScript": "#A"
}, "0"]
]
[
[
"SieveScript/set",
{
"oldState": "1603741717.50737918-4096",
"newState": "1603741751.227268529-4096",
"created": {
"A": {
"id": "dd1b164f-8cdc-448c-9f54",
"name": "ken-20201210T171432-0",
"blobId": "Sdd1b164f-8cdc-448c-9f54",
"isActive": true
}
},
"updated": {
"8abd6f4a-bcb4d-87650-3fcd": {
"isActive": false
}
},
"destroyed": null,
"notCreated": null,
"notUpdated": null,
"notDestroyed": null,
"accountId": "ken"
},
"0"
]
]
Update the script content using the JMAP Blob management extension
[RFC 9404]:
{
[
["Blob/upload", {
"accountId": "ken",
"create": {
"B": {
"data": [ {
"data:asText":
"redirect \"ken@example.com\"\r\n;"
} ],
"type": "application/sieve"
}
}
}, "1"],
["SieveScript/set", {
"accountId": "ken",
"update": { "dd1b164f-8cdc-448c-9f54": {
"blobId": "#B"
}
}
}, "2"]
]
[
[
"Blob/upload",
{
"oldState": null,
"newState": "1603741700.309607123-0128",
"created": {
"B": {
"id": "G969c83e44a6e10871c4568d0b94e1767c83ddeae",
"blobId": "G969c83e44a6e10871c4568d0b94e1767c83ddeae",
"type": "application/sieve",
"size": 29
}
},
"notCreated": null,
"accountId": "ken"
},
"1"
],
[
"SieveScript/set",
{
"oldState": "1603741751.227268529-4096",
"newState": "1603742603.309607868-4096",
"created": null,
"updated": {
"dd1b164f-8cdc-448c-9f54": null
},
"destroyed": null,
"notCreated": null,
"notUpdated": null,
"notDestroyed": null,
"accountId": "ken"
},
"2"
]
]
Update the script name, and deactivate it:
[
["SieveScript/set", {
"accountId": "ken",
"update": { "dd1b164f-8cdc-448c-9f54": {
"name": "myscript"
}
},
"onSuccessDeactivateScript": true
}, "3"]
]
[
[
"SieveScript/set",
{
"oldState": "1603742603.309607868-4096",
"newState": "1603742967.852315428-4096",
"created": null,
"updated": {
"dd1b164f-8cdc-448c-9f54": {
"isActive": false
}
},
"destroyed": null,
"notCreated": null,
"notUpdated": null,
"notDestroyed": null,
"accountId": "ken"
},
"3"
]
]
Reactivate the script:
[
["SieveScript/set", {
"accountId": "ken",
"onSuccessActivateScript": "dd1b164f-8cdc-448c-9f54"
}, "4"]
]
[
[
"SieveScript/set",
{
"oldState": "1603742967.852315428-4096",
"newState": "1603744460.316617118-4096",
"created": null,
"updated": {
"dd1b164f-8cdc-448c-9f54": {
"isActive": true
}
},
"destroyed": null,
"notCreated": null,
"notUpdated": null,
"notDestroyed": null,
"accountId": "ken"
},
"4"
]
]
Deactivate and destroy the active script:
[
["SieveScript/set", {
"accountId": "ken",
"onSuccessDeactivateScript": true
}, "5"],
["SieveScript/set", {
"accountId": "ken",
"destroy": [ "dd1b164f-8cdc-448c-9f54" ]
}, "6"]
]
[
[
"SieveScript/set",
{
"oldState": "1603744460.316617118-4096",
"newState": "1603744637.575375572-4096",
"created": null,
"updated": {
"dd1b164f-8cdc-448c-9f54": {
"isActive": false
}
},
"destroyed": null,
"notCreated": null,
"notUpdated": null,
"notDestroyed": null,
"accountId": "ken"
},
"5"
],
[
"SieveScript/set",
{
"oldState": "1603744637.575375572-4096",
"newState": "1603744637.854390875-4096",
"created": null,
"updated": null,
"destroyed": [
"dd1b164f-8cdc-448c-9f54"
],
"notCreated": null,
"notUpdated": null,
"notDestroyed": null,
"accountId": "ken"
},
"6"
]
]
2.5. SieveScript/query
This is a standard "/query" method as described in [RFC 8620],
Section 5.5. A "FilterCondition" object has the following
properties, either of which may be omitted:
*name*: String
The SieveScript "name" property contains the given string.
*isActive*: Boolean
The "isActive" property of the SieveScript must be identical to
the value given to match the condition.
The following SieveScript properties MUST be supported for sorting:
* *name*
* *isActive*
2.6. SieveScript/validate
This method is used by the client to verify Sieve script validity
without storing the script on the server.
The method takes the following arguments:
*accountId*: Id
The id of the account to use.
*blobId*: Id
The id of the blob containing the raw octets of the script to
validate, subject to the same requirements in Section 2.2.
The response has the following arguments:
*accountId*: Id
The id of the account used for this call.
*error*: SetError|null
An "invalidSieve" SetError object if the script content is invalid
(see Section 2.4), or null if the script content is valid.
This method provides functionality equivalent to that of the
CHECKSCRIPT command defined in [RFC 5804].
Script content must first be uploaded as per Section 2.2 prior to
referencing it in a SieveScript/validate call.
3. Quotas
Servers SHOULD impose quotas on Sieve scripts to prevent malicious
users from exceeding available storage. Administration of such
quotas is outside of the scope of this specification; however,
[RFC 9425] defines a data model for users to obtain quota details over
JMAP.
The mechanism for handling SieveScript requests that would place a
user over a quota setting is discussed in Section 2.4.
4. Compatibility with JMAP Vacation Response
Section 8 of [RFC 8621] defines a "VacationResponse" object to
represent an autoresponder to incoming email messages. Servers that
implement the VacationResponse as a Sieve script that resides among
other user scripts are subject to the following requirements:
* MUST allow the VacationResponse Sieve script to be fetched by the
SieveScript/get method (Section 2.3).
* MUST allow the VacationResponse Sieve script to be activated or
deactivated via the "onSuccessActivateScript" argument to the
SieveScript/set method (Section 2.4).
* MUST NOT allow the VacationResponse Sieve script to be destroyed
or have its content updated by the SieveScript/set method
(Section 2.4). Any such request MUST be rejected with a
"forbidden" SetError. A "description" property MAY be present
with an explanation that the script can only be modified by a
VacationResponse/set method.
5. Security Considerations
All security considerations discussed in JMAP [RFC 8620] and Sieve
[RFC 5228] apply to this specification.
Additionally, implementations MUST treat Sieve script content as
untrusted data. As such, script parsers MUST fail gracefully in the
face of syntactically invalid or malicious content and MUST be
prepared to deal with resource exhaustion (e.g., allocation of
enormous strings, lists, or command blocks).
6. IANA Considerations
6.1. JMAP Capability Registration for "sieve"
IANA has registered "sieve" in the "JMAP Capabilities" registry as
follows:
Capability Name: urn:ietf:params:jmap:sieve
Reference: RFC 9661
Intended Use: common
Change Controller: IETF
Security and Privacy Considerations: RFC 9661, Section 5
6.2. JMAP Data Type Registration for "SieveScript"
IANA has registered "SieveScript" in the "JMAP Data Types" registry
as follows:
Type Name: SieveScript
Can Reference Blobs: Yes
Can Use for State Change: Yes
Capability: urn:ietf:params:jmap:sieve
Reference: RFC 9661
6.3. JMAP Error Codes Registry
IANA has registered the following two new error codes in the "JMAP
Error Codes" registry, as defined in [RFC 8620].
6.3.1. invalidSieve
JMAP Error Code: invalidSieve
Intended Use: common
Change Controller: IETF
Reference: RFC 9661, Section 2.4
Description: The SieveScript violates the Sieve grammar [RFC 5228],
and/or one or more extensions mentioned in the script's "require"
statement(s) are not supported by the Sieve interpreter.
6.3.2. sieveIsActive
JMAP Error Code: sieveIsActive
Intended Use: common
Change Controller: IETF
Reference: RFC 9661, Section 2.4
Description: The client tried to destroy the active SieveScript.
7. References
7.1. Normative References
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC 2119, March 1997,
<https://www.rfc-editor.org/info/RFC 2119>.
[RFC 3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC 3629, November
2003, <https://www.rfc-editor.org/info/RFC 3629>.
[RFC 3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC 3986, January 2005,
<https://www.rfc-editor.org/info/RFC 3986>.
[RFC 5198] Klensin, J. and M. Padlipsky, "Unicode Format for Network
Interchange", RFC 5198, DOI 10.17487/RFC 5198, March 2008,
<https://www.rfc-editor.org/info/RFC 5198>.
[RFC 5228] Guenther, P., Ed. and T. Showalter, Ed., "Sieve: An Email
Filtering Language", RFC 5228, DOI 10.17487/RFC 5228,
January 2008, <https://www.rfc-editor.org/info/RFC 5228>.
[RFC 5435] Melnikov, A., Ed., Leiba, B., Ed., Segmuller, W., and T.
Martin, "Sieve Email Filtering: Extension for
Notifications", RFC 5435, DOI 10.17487/RFC 5435, January
2009, <https://www.rfc-editor.org/info/RFC 5435>.
[RFC 6134] Melnikov, A. and B. Leiba, "Sieve Extension: Externally
Stored Lists", RFC 6134, DOI 10.17487/RFC 6134, July 2011,
<https://www.rfc-editor.org/info/RFC 6134>.
[RFC 8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC 8174,
May 2017, <https://www.rfc-editor.org/info/RFC 8174>.
[RFC 8620] Jenkins, N. and C. Newman, "The JSON Meta Application
Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC 8620, July
2019, <https://www.rfc-editor.org/info/RFC 8620>.
[RFC 8621] Jenkins, N. and C. Newman, "The JSON Meta Application
Protocol (JMAP) for Mail", RFC 8621, DOI 10.17487/RFC 8621,
August 2019, <https://www.rfc-editor.org/info/RFC 8621>.
7.2. Informative References
[RFC 5232] Melnikov, A., "Sieve Email Filtering: Imap4flags
Extension", RFC 5232, DOI 10.17487/RFC 5232, January 2008,
<https://www.rfc-editor.org/info/RFC 5232>.
[RFC 5463] Freed, N., "Sieve Email Filtering: Ihave Extension",
RFC 5463, DOI 10.17487/RFC 5463, March 2009,
<https://www.rfc-editor.org/info/RFC 5463>.
[RFC 5804] Melnikov, A., Ed. and T. Martin, "A Protocol for Remotely
Managing Sieve Scripts", RFC 5804, DOI 10.17487/RFC 5804,
July 2010, <https://www.rfc-editor.org/info/RFC 5804>.
[RFC 9112] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
Ed., "HTTP/1.1", STD 99, RFC 9112, DOI 10.17487/RFC 9112,
June 2022, <https://www.rfc-editor.org/info/RFC 9112>.
[RFC 9404] Gondwana, B., Ed., "JSON Meta Application Protocol (JMAP)
Blob Management Extension", RFC 9404,
DOI 10.17487/RFC 9404, August 2023,
<https://www.rfc-editor.org/info/RFC 9404>.
[RFC 9425] Cordier, R., Ed., "JSON Meta Application Protocol (JMAP)
for Quotas", RFC 9425, DOI 10.17487/RFC 9425, June 2023,
<https://www.rfc-editor.org/info/RFC 9425>.
Acknowledgments
The concepts in this document are based largely on those in
[RFC 5804]. The author would like to thank the authors of that
document for providing both inspiration and some borrowed text for
this document.
The author would also like to thank the following individuals for
contributing their ideas and support for writing this specification:
Joris Baum, Mauro De Gennaro, Bron Gondwana, Neil Jenkins, Alexey
Melnikov, and Ricardo Signes.
Author's Address
Kenneth Murchison
Fastmail US LLC
1429 Walnut Street, Suite 1201
Philadelphia, PA 19102
United States of America
Email: murch@fastmailteam.com
RFC TOTAL SIZE: 31731 bytes
PUBLICATION DATE: Friday, September 27th, 2024
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
