|
|
|
|
|
|
IETF RFC 9629
Last modified on Thursday, August 8th, 2024
 Permanent link to RFC 9629
 Search GitHub Wiki for RFC 9629
 Show other RFCs mentioning RFC 9629
Internet Engineering Task Force (IETF) R. Housley
Request for Comments: 9629 Vigil Security
Updates: 5652 J. Gray
Category: Standards Track Entrust
ISSN: 2070-1721 大久保 智史 (T. Okubo)
Penguin Securities Pte. Ltd.
August 2024
Using Key Encapsulation Mechanism (KEM) Algorithms in the Cryptographic
Message Syntax (CMS)
 Abstract
The Cryptographic Message Syntax (CMS) supports key transport and key
agreement algorithms. In recent years, cryptographers have been
specifying Key Encapsulation Mechanism (KEM) algorithms, including
quantum-secure KEM algorithms. This document defines conventions for
the use of KEM algorithms by the originator and recipients to encrypt
and decrypt CMS content. This document updates RFC 5652.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/RFC 9629.
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Revised BSD License text as described in Section 4.e of the
Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
Table of Contents
1. Introduction
1.1. Terminology
1.2. ASN.1
1.3. CMS Version Numbers
2. KEM Processing Overview
3. KEM Recipient Information
4. KEM Algorithm Identifier
5. Key Derivation
6. ASN.1 Modules
6.1. KEMAlgorithmInformation-2023 ASN.1 Module
6.2. CMS-KEMRecipientInfo-2023 ASN.1 Module
7. Security Considerations
8. IANA Considerations
9. References
9.1. Normative References
9.2. Informative References
Acknowledgements
Authors' Addresses
1. Introduction
This document updates "Cryptographic Message Syntax (CMS)" [RFC 5652].
The CMS enveloped-data content type [RFC 5652] and the CMS
authenticated-enveloped-data content type [RFC 5083] support both key
transport and key agreement algorithms to establish the key used to
encrypt and decrypt the content. In recent years, cryptographers
have been specifying Key Encapsulation Mechanism (KEM) algorithms,
including quantum-secure KEM algorithms. This document defines
conventions for the use of KEM algorithms for the CMS enveloped-data
content type and the CMS authenticated-enveloped-data content type.
A KEM algorithm is a one-pass (store-and-forward) mechanism for
transporting random keying material to a recipient using the
recipient's public key. This means that the originator and the
recipients do not need to be online at the same time. The
recipient's private key is needed to recover the random keying
material, which is then treated as a pairwise shared secret (ss)
between the originator and recipient.
The KEMRecipientInfo structure defined in this document uses the
pairwise shared secret as an input to a key derivation function (KDF)
to produce a pairwise key-encryption key (KEK). Then, the pairwise
KEK is used to encrypt a content-encryption key (CEK) or a content-
authenticated-encryption key (CAEK) for that recipient. All of the
recipients receive the same CEK or CAEK.
In this environment, security depends on three things. First, the
KEM algorithm must be secure against adaptive chosen ciphertext
attacks. Second, the key-encryption algorithm must provide
confidentiality and integrity protection. Third, the choices of the
KDF and the key-encryption algorithm need to provide the same level
of security as the KEM algorithm.
A KEM algorithm provides three functions:
KeyGen() -> (pk, sk):
Generate the public key (pk) and a private key (sk).
Encapsulate(pk) -> (ct, ss):
Given the recipient's public key (pk), produce a ciphertext (ct)
to be passed to the recipient and shared secret (ss) for the
originator.
Decapsulate(sk, ct) -> ss:
Given the private key (sk) and the ciphertext (ct), produce the
shared secret (ss) for the recipient.
To support a particular KEM algorithm, the CMS originator MUST
implement the KEM Encapsulate() function.
To support a particular KEM algorithm, the CMS recipient MUST
implement the KEM KeyGen() function and the KEM Decapsulate()
function. The recipient's public key is usually carried in a
certificate [RFC 5280].
1.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC 2119] [RFC 8174] when, and only when, they appear in all
capitals, as shown here.
1.2. ASN.1
CMS values are generated using ASN.1 [X.680], which uses the Basic
Encoding Rules (BER) and the Distinguished Encoding Rules (DER)
[X.690].
1.3. CMS Version Numbers
As described in Section 1.3 of [RFC 5652], the major data structures
include a version number as the first item in the data structure.
The version number is intended to avoid ASN.1 decode errors. Some
implementations do not check the version number prior to attempting a
decode, and then if a decode error occurs, the version number is
checked as part of the error-handling routine. This is a reasonable
approach; it places error processing outside of the fast path. This
approach is also forgiving when an incorrect version number is used
by the originator.
Whenever the structure is updated, a higher version number will be
assigned. However, to ensure maximum interoperability, the higher
version number is only used when the new syntax feature is employed.
That is, the lowest version number that supports the generated syntax
is used.
2. KEM Processing Overview
KEM algorithms can be used with three CMS content types: the
enveloped-data content type [RFC 5652], the authenticated-data content
type [RFC 5652], or the authenticated-enveloped-data content type
[RFC 5083]. For simplicity, the terminology associated with the
enveloped-data content type will be used in this overview.
The originator randomly generates the CEK (or the CAEK), and then all
recipients obtain that key as an encrypted object within the
KEMRecipientInfo encryptedKey field explained in Section 3. All
recipients use the originator-generated symmetric key to decrypt the
CMS message.
A KEM algorithm and a key derivation function are used to securely
establish a pairwise symmetric KEK, which is used to encrypt the
originator-generated CEK (or the CAEK).
In advance, each recipient uses the KEM KeyGen() function to create a
key pair. The recipient will often obtain a certificate [RFC 5280]
that includes the newly generated public key. Whether the public key
is certified or not, the newly generated public key is made available
to potential originators.
The originator establishes the CEK (or the CAEK) using these steps:
1. The CEK (or the CAEK) is generated at random.
2. For each recipient:
* The recipient's public key is used with the KEM Encapsulate()
function to obtain a pairwise shared secret (ss) and the
ciphertext for the recipient.
* The key derivation function is used to derive a pairwise
symmetric KEK, from the pairwise ss and other data that is
optionally sent in the ukm field.
* The KEK is used to encrypt the CEK for this recipient.
3. The CEK (or the CAEK) is used to encrypt the content for all
recipients.
The recipient obtains the CEK (or the CAEK) using these steps:
1. The recipient's private key and the ciphertext are used with the
KEM Decapsulate() function to obtain a pairwise ss.
2. The key derivation function is used to derive a pairwise
symmetric KEK, from the pairwise ss and other data that is
optionally sent in the ukm field.
3. The KEK is used to decrypt the CEK (or the CAEK).
4. The CEK (or the CAEK) is used to decrypt the content.
3. KEM Recipient Information
This document defines KEMRecipientInfo for use with KEM algorithms.
As specified in Section 6.2.5 of [RFC 5652], recipient information for
additional key management techniques is represented in the
OtherRecipientInfo type. Each key management technique is identified
by a unique ASN.1 object identifier.
The object identifier associated with KEMRecipientInfo is:
id-ori OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) 13 }
id-ori-kem OBJECT IDENTIFIER ::= { id-ori 3 }
The KEMRecipientInfo type is:
KEMRecipientInfo ::= SEQUENCE {
version CMSVersion, -- always set to 0
rid RecipientIdentifier,
kem KEMAlgorithmIdentifier,
kemct OCTET STRING,
kdf KeyDerivationAlgorithmIdentifier,
kekLength INTEGER (1..65535),
ukm [0] EXPLICIT UserKeyingMaterial OPTIONAL,
wrap KeyEncryptionAlgorithmIdentifier,
encryptedKey EncryptedKey }
The fields of the KEMRecipientInfo type have the following meanings:
version is the syntax version number. The version MUST be 0. The
CMSVersion type is described in Section 10.2.5 of [RFC 5652].
rid specifies the recipient's certificate or key that was used by
the originator with the KEM Encapsulate() function. The
RecipientIdentifier provides two alternatives for specifying the
recipient's certificate [RFC 5280], and thereby the recipient's
public key. The recipient's certificate MUST contain a KEM public
key. Therefore, a recipient X.509 version 3 certificate that
contains a key usage extension MUST assert the keyEncipherment
bit. The issuerAndSerialNumber alternative identifies the
recipient's certificate by the issuer's distinguished name and the
certificate serial number; the subjectKeyIdentifier alternative
identifies the recipient's certificate by a key identifier. When
an X.509 certificate is referenced, the key identifier matches the
X.509 subjectKeyIdentifier extension value. When other
certificate formats are referenced, the documents that specify the
certificate format and their use with the CMS must include details
on matching the key identifier to the appropriate certificate
field. For recipient processing, implementations MUST support
both of these alternatives for specifying the recipient's
certificate. For originator processing, implementations MUST
support at least one of these alternatives.
kem identifies the KEM algorithm, and any associated parameters,
used by the originator. The KEMAlgorithmIdentifier is described
in Section 4.
kemct is the ciphertext produced by the KEM Encapsulate() function
for this recipient.
kdf identifies the key derivation function, and any associated
parameters, used by the originator to generate the KEK. The
KeyDerivationAlgorithmIdentifier is described in Section 10.1.6 of
[RFC 5652].
kekLength is the size of the KEK in octets. This value is one of
the inputs to the key derivation function. The upper bound on the
integer value is provided to make it clear to implementers that
support for very large integer values is not needed.
Implementations MUST confirm that the value provided is consistent
with the key-encryption algorithm identified in the wrap field
below.
ukm is optional user keying material. When the ukm value is
provided, it is used as part of the info structure described in
Section 5 to provide a context input to the key derivation
function. For example, the ukm value could include a nonce,
application-specific context information, or an identifier for the
originator. A KEM algorithm may place requirements on the ukm
value. Implementations that do not support the ukm field SHOULD
gracefully discontinue processing when the ukm field is present.
Note that this requirement expands the original purpose of the ukm
described in Section 10.2.6 of [RFC 5652]; it is not limited to
being used with key agreement algorithms.
wrap identifies a key-encryption algorithm used to encrypt the
CEK. The KeyEncryptionAlgorithmIdentifier is described in
Section 10.1.3 of [RFC 5652].
encryptedKey is the result of encrypting the CEK or the CAEK (the
content-authenticated-encryption key, as discussed in [RFC 5083])
with the KEK. EncryptedKey is an OCTET STRING.
4. KEM Algorithm Identifier
The KEMAlgorithmIdentifier type identifies a KEM algorithm used to
establish a pairwise ss. The details of establishment depend on the
KEM algorithm used. A key derivation function is used to transform
the pairwise ss value into a KEK.
KEMAlgorithmIdentifier ::= AlgorithmIdentifier{ KEM-ALGORITHM, {...} }
5. Key Derivation
This section describes the conventions of using the KDF to compute
the KEK for KEMRecipientInfo. For simplicity, the terminology used
in the HKDF specification [RFC 5869] is used here.
Many KDFs internally employ a one-way hash function. When this is
the case, the hash function that is used is indirectly indicated by
the KeyDerivationAlgorithmIdentifier. Other KDFs internally employ
an encryption algorithm. When this is the case, the encryption that
is used is indirectly indicated by the
KeyDerivationAlgorithmIdentifier.
The KDF inputs are as follows:
IKM is the input keying material. It is a symmetric secret input
to the KDF. The KDF may use a hash function or an encryption
algorithm to generate a pseudorandom key. The algorithm used to
derive the IKM is dependent on the algorithm identified in the
KeyDerivationAlgorithmIdentifier.
L is the length of the output keying material in octets. L is
identified in the kekLength of the KEMRecipientInfo. The value is
dependent on the key-encryption algorithm used; the key-encryption
algorithm is identified in the KeyEncryptionAlgorithmIdentifier.
info is contextual input to the KDF. The DER-encoded
CMSORIforKEMOtherInfo structure is created from elements of the
KEMRecipientInfo structure. CMSORIforKEMOtherInfo is defined as:
CMSORIforKEMOtherInfo ::= SEQUENCE {
wrap KeyEncryptionAlgorithmIdentifier,
kekLength INTEGER (1..65535),
ukm [0] EXPLICIT UserKeyingMaterial OPTIONAL }
The CMSORIforKEMOtherInfo structure contains the following:
wrap identifies a key-encryption algorithm; the output of the key
derivation function will be used as a key for this algorithm.
kekLength is the length of the KEK in octets; the output of the
key derivation function will be exactly this size.
ukm is optional user keying material; see Section 3.
The KDF output is as follows:
OKM is the output keying material with the exact length of L
octets. The OKM is the KEK that is used to encrypt the CEK or the
CAEK.
An acceptable KDF MUST accept an IKM, L, and info as inputs. An
acceptable KDF MAY also accept a salt input value, which is carried
as a parameter to the KeyDerivationAlgorithmIdentifier if present.
All of these inputs MUST influence the output of the KDF.
6. ASN.1 Modules
This section provides two ASN.1 modules [X.680]. The first ASN.1
module is an extension to the AlgorithmInformation-2009 module
discussed in [RFC 5912]; it defines the KEM-ALGORITHM CLASS. The
second ASN.1 module defines the structures needed to use KEM
algorithms with CMS [RFC 5652].
The first ASN.1 module uses EXPLICIT tagging, and the second ASN.1
module uses IMPLICIT tagging.
Both ASN.1 modules follow the conventions established in [RFC 5911],
[RFC 5912], and [RFC 6268].
6.1. KEMAlgorithmInformation-2023 ASN.1 Module
<CODE BEGINS>
KEMAlgorithmInformation-2023
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-kemAlgorithmInformation-2023(109) }
DEFINITIONS EXPLICIT TAGS ::=
BEGIN
-- EXPORTS ALL;
IMPORTS
ParamOptions, PUBLIC-KEY, SMIME-CAPS
FROM AlgorithmInformation-2009
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-algorithmInformation-02(58) } ;
-- KEM-ALGORITHM
--
-- Describes the basic properties of a KEM algorithm
--
-- Suggested prefix for KEM algorithm objects is: kema-
--
-- &id - contains the OID identifying the KEM algorithm
-- &Value - if present, contains a type definition for the kemct;
-- if absent, implies that no ASN.1 encoding is
-- performed on the kemct value
-- &Params - if present, contains the type for the algorithm
-- parameters; if absent, implies no parameters
-- ¶mPresence - parameter presence requirement
-- &PublicKeySet - specifies which public keys are used with
-- this algorithm
-- &Ukm - if absent, type for user keying material
-- &ukmPresence - specifies the requirements to define the UKM
-- field
-- &smimeCaps - contains the object describing how the S/MIME
-- capabilities are presented.
--
-- Example:
-- kema-kem-rsa KEM-ALGORITHM ::= {
-- IDENTIFIER id-kem-rsa
-- PARAMS TYPE RsaKemParameters ARE optional
-- PUBLIC-KEYS { pk-rsa | pk-rsa-kem }
-- UKM ARE optional
-- SMIME-CAPS { TYPE GenericHybridParameters
-- IDENTIFIED BY id-rsa-kem }
-- }
KEM-ALGORITHM ::= CLASS {
&id OBJECT IDENTIFIER UNIQUE,
&Value OPTIONAL,
&Params OPTIONAL,
¶mPresence ParamOptions DEFAULT absent,
&PublicKeySet PUBLIC-KEY OPTIONAL,
&Ukm OPTIONAL,
&ukmPresence ParamOptions DEFAULT absent,
&smimeCaps SMIME-CAPS OPTIONAL
} WITH SYNTAX {
IDENTIFIER &id
[VALUE &Value]
[PARAMS [TYPE &Params] ARE ¶mPresence]
[PUBLIC-KEYS &PublicKeySet]
[UKM [TYPE &Ukm] ARE &ukmPresence]
[SMIME-CAPS &smimeCaps]
}
END
<CODE ENDS>
6.2. CMS-KEMRecipientInfo-2023 ASN.1 Module
<CODE BEGINS>
CMS-KEMRecipientInfo-2023
{ iso(1) member-body(2) us(840) rsadsi(113549)
pkcs(1) pkcs-9(9) smime(16) modules(0)
id-mod-cms-kemri-2023(77) }
DEFINITIONS IMPLICIT TAGS ::=
BEGIN
-- EXPORTS ALL;
IMPORTS
OTHER-RECIPIENT, CMSVersion, RecipientIdentifier,
EncryptedKey, KeyDerivationAlgorithmIdentifier,
KeyEncryptionAlgorithmIdentifier, UserKeyingMaterial
FROM CryptographicMessageSyntax-2010 -- RFC 6268
{ iso(1) member-body(2) us(840) rsadsi(113549)
pkcs(1) pkcs-9(9) smime(16) modules(0)
id-mod-cms-2009(58) }
KEM-ALGORITHM
FROM KEMAlgorithmInformation-2023 -- RFC 9629
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-kemAlgorithmInformation-2023(109) }
AlgorithmIdentifier{}
FROM AlgorithmInformation-2009 -- RFC 5912
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-algorithmInformation-02(58) } ;
--
-- OtherRecipientInfo Types (ori-)
--
SupportedOtherRecipInfo OTHER-RECIPIENT ::= { ori-KEM, ... }
ori-KEM OTHER-RECIPIENT ::= {
KEMRecipientInfo IDENTIFIED BY id-ori-kem }
id-ori OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) 13 }
id-ori-kem OBJECT IDENTIFIER ::= { id-ori 3 }
--
-- KEMRecipientInfo
--
KEMRecipientInfo ::= SEQUENCE {
version CMSVersion, -- always set to 0
rid RecipientIdentifier,
kem KEMAlgorithmIdentifier,
kemct OCTET STRING,
kdf KeyDerivationAlgorithmIdentifier,
kekLength INTEGER (1..65535),
ukm [0] EXPLICIT UserKeyingMaterial OPTIONAL,
wrap KeyEncryptionAlgorithmIdentifier,
encryptedKey EncryptedKey }
KEMAlgSet KEM-ALGORITHM ::= { ... }
KEMAlgorithmIdentifier ::=
AlgorithmIdentifier{ KEM-ALGORITHM, {KEMAlgSet} }
--
-- CMSORIforKEMOtherInfo
--
CMSORIforKEMOtherInfo ::= SEQUENCE {
wrap KeyEncryptionAlgorithmIdentifier,
kekLength INTEGER (1..65535),
ukm [0] EXPLICIT UserKeyingMaterial OPTIONAL }
END
<CODE ENDS>
7. Security Considerations
The security considerations discussed in [RFC 5652] are applicable to
this document.
To be appropriate for use with this specification, the KEM algorithm
MUST explicitly be designed to be secure when the public key is used
many times. For example, a KEM algorithm with a single-use public
key is not appropriate, because the public key is expected to be
carried in a long-lived certificate [RFC 5280] and used over and over.
Thus, KEM algorithms that offer indistinguishability under adaptive
chosen ciphertext attack (IND-CCA2) security are appropriate. A
common design pattern for obtaining IND-CCA2 security with public key
reuse is to apply the Fujisaki-Okamoto (FO) transform [FO] or a
variant of the FO transform [HHK].
The KDF SHOULD offer at least the security level of the KEM.
The choice of the key-encryption algorithm and the size of the KEK
SHOULD be made based on the security level provided by the KEM. The
key-encryption algorithm and the KEK SHOULD offer at least the
security level of the KEM.
KEM algorithms do not provide data origin authentication; therefore,
when a KEM algorithm is used with the authenticated-data content
type, the contents are delivered with integrity from an unknown
source.
Implementations MUST protect the KEM private key, the KEK, and the
CEK (or the CAEK). Compromise of the KEM private key may result in
the disclosure of all contents protected with that KEM private key.
However, compromise of the KEK, the CEK, or the CAEK may result in
disclosure of the encrypted content of a single message.
The KEM produces the IKM input value for the KDF. This IKM value
MUST NOT be reused for any other purpose. Likewise, any random value
used by the KEM algorithm to produce the shared secret or its
encapsulation MUST NOT be reused for any other purpose. That is, the
originator MUST generate a fresh KEM shared secret for each recipient
in the KEMRecipientInfo structure, including any random value used by
the KEM algorithm to produce the KEM shared secret. In addition, the
originator MUST discard the KEM shared secret, including any random
value used by the KEM algorithm to produce the KEM shared secret,
after constructing the entry in the KEMRecipientInfo structure for
the corresponding recipient. Similarly, the recipient MUST discard
the KEM shared secret, including any random value used by the KEM
algorithm to produce the KEM shared secret, after constructing the
KEK from the KEMRecipientInfo structure.
Implementations MUST randomly generate content-encryption keys,
content-authenticated-encryption keys, and message-authentication
keys. Also, the generation of KEM key pairs relies on random
numbers. The use of inadequate pseudorandom number generators
(PRNGs) to generate these keys can result in little or no security.
An attacker may find it much easier to reproduce the PRNG environment
that produced the keys, searching the resulting small set of
possibilities, rather than brute-force searching the whole key space.
The generation of quality random numbers is difficult. [RFC 4086]
offers important guidance in this area.
If the cipher and key sizes used for the key-encryption algorithm and
the content-encryption algorithm are different, the effective
security is determined by the weaker of the two algorithms. If, for
example, the content is encrypted with AES-CBC using a 128-bit CEK
and the CEK is wrapped with AES-KEYWRAP using a 256-bit KEK, then at
most 128 bits of protection is provided.
If the cipher and key sizes used for the key-encryption algorithm and
the content-authenticated-encryption algorithm are different, the
effective security is determined by the weaker of the two algorithms.
If, for example, the content is encrypted with AES-GCM using a
128-bit CAEK and the CAEK is wrapped with AES-KEYWRAP using a 192-bit
KEK, then at most 128 bits of protection is provided.
If the cipher and key sizes used for the key-encryption algorithm and
the message-authentication algorithm are different, the effective
security is determined by the weaker of the two algorithms. If, for
example, the content is authenticated with HMAC-SHA256 using a
512-bit message-authentication key and the message-authentication key
is wrapped with AES-KEYWRAP using a 256-bit KEK, then at most 256
bits of protection is provided.
Implementers should be aware that cryptographic algorithms, including
KEM algorithms, become weaker with time. As new cryptoanalysis
techniques are developed and computing capabilities advance, the work
factor to break a particular cryptographic algorithm will be reduced.
As a result, cryptographic algorithm implementations should be
modular, allowing new algorithms to be readily inserted. That is,
implementers should be prepared for the set of supported algorithms
to change over time.
8. IANA Considerations
For KEMRecipientInfo as defined in Section 3, IANA has assigned the
following OID in the "SMI Security for S/MIME Other Recipient Info
Identifiers (1.2.840.113549.1.9.16.13)" registry:
+=========+=============+============+
| Decimal | Description | References |
+=========+=============+============+
| 3 | id-ori-kem | RFC 9629 |
+---------+-------------+------------+
Table 1
For the ASN.1 module defined in Section 6.1, IANA has assigned the
following OID in the "SMI Security for PKIX Module Identifier"
registry (1.3.6.1.5.5.7.0):
+=========+=====================================+============+
| Decimal | Description | References |
+=========+=====================================+============+
| 109 | id-mod-kemAlgorithmInformation-2023 | RFC 9629 |
+---------+-------------------------------------+------------+
Table 2
For the ASN.1 module defined in Section 6.2, IANA has assigned the
following OID in the "SMI Security for S/MIME Module Identifier
(1.2.840.113549.1.9.16.0)" registry:
+=========+=======================+============+
| Decimal | Description | References |
+=========+=======================+============+
| 77 | id-mod-cms-kemri-2023 | RFC 9629 |
+---------+-----------------------+------------+
Table 3
9. References
9.1. Normative References
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC 2119, March 1997,
<https://www.rfc-editor.org/info/RFC 2119>.
[RFC 5083] Housley, R., "Cryptographic Message Syntax (CMS)
Authenticated-Enveloped-Data Content Type", RFC 5083,
DOI 10.17487/RFC 5083, November 2007,
<https://www.rfc-editor.org/info/RFC 5083>.
[RFC 5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, DOI 10.17487/RFC 5280, May 2008,
<https://www.rfc-editor.org/info/RFC 5280>.
[RFC 5652] Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
RFC 5652, DOI 10.17487/RFC 5652, September 2009,
<https://www.rfc-editor.org/info/RFC 5652>.
[RFC 5911] Hoffman, P. and J. Schaad, "New ASN.1 Modules for
Cryptographic Message Syntax (CMS) and S/MIME", RFC 5911,
DOI 10.17487/RFC 5911, June 2010,
<https://www.rfc-editor.org/info/RFC 5911>.
[RFC 5912] Hoffman, P. and J. Schaad, "New ASN.1 Modules for the
Public Key Infrastructure Using X.509 (PKIX)", RFC 5912,
DOI 10.17487/RFC 5912, June 2010,
<https://www.rfc-editor.org/info/RFC 5912>.
[RFC 8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC 8174,
May 2017, <https://www.rfc-editor.org/info/RFC 8174>.
[X.680] ITU-T, "Information technology - Abstract Syntax Notation
One (ASN.1): Specification of basic notation", ITU-T
Recommendation X.680, ISO/IEC 8824-1:2021, February 2021,
<https://www.itu.int/rec/T-REC-X.680>.
[X.690] ITU-T, "Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER), Canonical
Encoding Rules (CER) and Distinguished Encoding Rules
(DER)", ITU-T Recommendation X.690, ISO/IEC 8825-1:2021,
February 2021, <https://www.itu.int/rec/T-REC-X.690>.
9.2. Informative References
[FO] Fujisaki, E. and T. Okamoto, "Secure Integration of
Asymmetric and Symmetric Encryption Schemes", Springer
Science and Business Media LLC, Journal of Cryptology,
vol. 26, no. 1, pp. 80-101, DOI 10.1007/s00145-011-9114-1,
December 2011,
<https://doi.org/10.1007/s00145-011-9114-1>.
[HHK] Hofheinz, D., Hövelmanns, K., and E. Kiltz, "A Modular
Analysis of the Fujisaki-Okamoto Transformation", Springer
International Publishing, Theory of Cryptography, TCC
2017, Lecture Notes in Computer Science, vol. 10677, pp.
341-371, Print ISBN 9783319704999, Online ISBN
9783319705002, DOI 10.1007/978-3-319-70500-2_12, November
2017, <https://doi.org/10.1007/978-3-319-70500-2_12>.
[RFC 4086] Eastlake 3rd, D., Schiller, J., and S. Crocker,
"Randomness Requirements for Security", BCP 106, RFC 4086,
DOI 10.17487/RFC 4086, June 2005,
<https://www.rfc-editor.org/info/RFC 4086>.
[RFC 5869] Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand
Key Derivation Function (HKDF)", RFC 5869,
DOI 10.17487/RFC 5869, May 2010,
<https://www.rfc-editor.org/info/RFC 5869>.
[RFC 6268] Schaad, J. and S. Turner, "Additional New ASN.1 Modules
for the Cryptographic Message Syntax (CMS) and the Public
Key Infrastructure Using X.509 (PKIX)", RFC 6268,
DOI 10.17487/RFC 6268, July 2011,
<https://www.rfc-editor.org/info/RFC 6268>.
Acknowledgements
Our thanks to Burt Kaliski for his guidance and design review.
Our thanks to Carl Wallace for his careful review of the ASN.1
modules.
Our thanks to Hendrik Brockhaus, Jonathan Hammell, Mike Jenkins,
David von Oheimb, Francois Rousseau, and Linda Dunbar for their
careful reviews and thoughtful comments.
Authors' Addresses
Russ Housley
Vigil Security, LLC
Herndon, VA
United States of America
Email: housley@vigilsec.com
John Gray
Entrust
Minneapolis, MN
United States of America
Email: john.gray@entrust.com
Tomofumi Okubo
Penguin Securities Pte. Ltd.
Singapore
Email: tomofumi.okubo+ietf@gmail.com
Additional contact information:
大久保 智史
Penguin Securities Pte. Ltd.
Singapore
RFC TOTAL SIZE: 33555 bytes
PUBLICATION DATE: Thursday, August 8th, 2024
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
