|
|
|
|
|
|
IETF RFC 8842
Last modified on Monday, January 18th, 2021
 Permanent link to RFC 8842
 Search GitHub Wiki for RFC 8842
 Show other RFCs mentioning RFC 8842
Internet Engineering Task Force (IETF) C. Holmberg
Request for Comments: 8842 Ericsson
Updates: 5763, 7345 R. Shpount
Category: Standards Track TurboBridge
ISSN: 2070-1721 January 2021
Session Description Protocol (SDP) Offer/Answer Considerations for
Datagram Transport Layer Security (DTLS) and Transport Layer Security
(TLS)
 Abstract
This document defines the Session Description Protocol (SDP) offer/
answer procedures for negotiating and establishing a Datagram
Transport Layer Security (DTLS) association. The document also
defines the criteria for when a new DTLS association must be
established. The document updates RFCs 5763 and 7345 by replacing
common SDP offer/answer procedures with a reference to this
specification.
This document defines a new SDP media-level attribute, "tls-id".
This document also defines how the "tls-id" attribute can be used for
negotiating and establishing a Transport Layer Security (TLS)
connection, in conjunction with the procedures in RFCs 4145 and 8122.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/RFC 8842.
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction
2. Conventions
3. Establishing a New DTLS Association
3.1. General
3.2. Change of Local Transport Parameters
3.3. Change of ICE ufrag Value
4. SDP "tls-id" Attribute
5. SDP Offer/Answer Procedures
5.1. General
5.2. Generating the Initial SDP Offer
5.3. Generating the Answer
5.4. Offerer Processing of the SDP Answer
5.5. Modifying the Session
6. ICE Considerations
7. TLS Considerations
8. SIP Considerations
9. RFC Updates
9.1. General
9.2. Update to RFC 5763
9.2.1. Update to Section 1
9.2.2. Update to Section 5
9.2.3. Update to Section 6.6
9.2.4. Update to Section 6.7.1
9.3. Update to RFC 7345
9.3.1. Update to Section 4
9.3.2. Update to Section 5.2.1
9.3.3. Update to Section 9.1
10. Security Considerations
11. IANA Considerations
12. References
12.1. Normative References
12.2. Informative References
Acknowledgements
Authors' Addresses
1. Introduction
[RFC 5763] defines Session Description Protocol (SDP) offer/answer
procedures for Secure Real-time Transport Protocol using Datagram
Transport Layer Security (DTLS-SRTP). [RFC 7345] defines SDP offer/
answer procedures for UDP Transport Layer over Datagram Transport
Layer Security (UDPTL-DTLS). This specification defines general
offer/answer procedures for DTLS, based on the procedures in
[RFC 5763]. Other specifications, defining specific DTLS usages, can
then reference this specification, in order to ensure that the DTLS
aspects are common among all usages. Having common procedures is
essential when multiple usages share the same DTLS association
[RFC 8843]. This document updates [RFC 5763] and [RFC 7345] by
replacing common SDP offer/answer procedures with a reference to this
specification.
| NOTE: Since the publication of [RFC 5763], [RFC 4474] has been
| obsoleted by [RFC 8224]. The updating of the references (and
| the associated procedures) within [RFC 5763] is outside the
| scope of this document. However, implementers of [RFC 5763]
| applications are encouraged to implement [RFC 8224] instead of
| [RFC 4474].
As defined in [RFC 5763], a new DTLS association MUST be established
when transport parameters are changed. Transport parameter change is
not well defined when Interactive Connectivity Establishment (ICE)
[RFC 8445] is used. One possible way to determine a transport change
is based on ufrag [RFC 8445] change, but the ufrag value is changed
both when ICE is negotiated and when ICE restart [RFC 8445] occurs.
These events do not always require a new DTLS association to be
established, but previously there was no way to explicitly indicate
in an SDP offer or answer whether a new DTLS association was
required. To solve that problem, this document defines a new SDP
attribute, "tls-id". The pair of SDP "tls-id" attribute values (the
attribute values of the offerer and the answerer) uniquely identifies
the DTLS association. Providing a new value of the "tls-id"
attribute in an SDP offer or answer can be used to indicate whether a
new DTLS association is to be established.
The SDP "tls-id" attribute can be specified when negotiating a
Transport Layer Security (TLS) connection, using the procedures in
this document in conjunction with the procedures in [RFC 5763] and
[RFC 8122]. The unique combination of SDP "tls-id" attribute values
can be used to identify the negotiated TLS connection. The unique
value can be used, for example, within TLS protocol extensions to
differentiate between multiple TLS connections and correlate those
connections with specific offer/answer exchanges. The TLS-specific
considerations are described in Section 7.
2. Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC 2119] [RFC 8174] when, and only when, they appear in all
capitals, as shown here.
3. Establishing a New DTLS Association
3.1. General
A new DTLS association must be established between two endpoints
after a successful SDP offer/answer exchange in the following cases:
* The negotiated DTLS setup roles change; or
* One or more fingerprint values are modified, added, or removed in
either an SDP offer or answer; or
* The intent to establish a new DTLS association is explicitly
signaled using SDP, by changing the value of the SDP "tls-id"
attribute defined in this document;
| NOTE: The first two items above are based on the procedures in
| [RFC 5763]. This specification adds the support for explicit
| signaling using the SDP "tls-id" attribute.
A new DTLS association can only be established as a result of the
successful SDP offer/answer exchange. Whenever an entity determines
that a new DTLS association is required, the entity MUST initiate an
SDP offer/answer exchange, following the procedures in Section 5.
The sections below describe typical cases where a new DTLS
association needs to be established.
In this document, a "new DTLS association" between two endpoints
refers to either an initial DTLS association (when no DTLS
association is currently established between the endpoints) or a DTLS
association replacing a previously established one.
3.2. Change of Local Transport Parameters
If an endpoint modifies its local transport parameters (address and/
or port), and if the modification requires a new DTLS association,
the endpoint MUST change its local SDP "tls-id" attribute value (see
Section 4).
If the underlying transport protocol prohibits a DTLS association
from spanning multiple 5-tuples (transport/source address/source
port/destination address/destination port), and if the 5-tuple is
changed, the endpoint MUST change its local SDP "tls-id" attribute
value (see Section 4). An example of such a case is when DTLS is
carried over the Stream Control Transmission Protocol (SCTP), as
described in [RFC 6083].
3.3. Change of ICE ufrag Value
If an endpoint uses ICE and modifies a local ufrag value, and if the
modification requires a new DTLS association, the endpoint MUST
change its local SDP "tls-id" attribute value (see Section 4).
4. SDP "tls-id" Attribute
The pair of SDP "tls-id" attribute values (the attribute values of
the offerer and the answerer) uniquely identifies the DTLS
association or TLS connection.
Name: tls-id
Value: tls-id-value
Usage Level: media
Charset Dependent: no
Default Value: N/A
Syntax:
tls-id-value = 20*255(tls-id-char)
tls-id-char = ALPHA / DIGIT / "+" / "/" / "-" / "_"
<ALPHA and DIGIT defined in RFC 4566>
Example:
a=tls-id:abc3de65cddef001be82
Every time an endpoint requests to establish a new DTLS association,
the endpoint MUST generate a new local "tls-id" attribute value. An
unchanged local "tls-id" attribute value, in combination with non-
changed fingerprints, indicates that the endpoint intends to reuse
the existing DTLS association.
The "tls-id" attribute value MUST be generated using a strong random
function and include at least 120 bits of randomness.
No default value is defined for the SDP "tls-id" attribute.
Implementations that wish to use the attribute MUST explicitly
include it in SDP offers and answers. If an offer or answer does not
contain a "tls-id" attribute (this could happen if the offerer or
answerer represents an existing implementation that has not been
updated to support the "tls-id" attribute), a modification of one or
more of the following characteristics MUST be treated as an
indication that an endpoint wants to establish a new DTLS
association, unless there is another mechanism to explicitly indicate
that a new DTLS association is to be established:
* DTLS setup role; or
* fingerprint set; or
* local transport parameters
| NOTE: A modification of the ufrag value is not treated as an
| indication that an endpoint wants to establish a new DTLS
| association. In order to indicate that a new DTLS association
| is to be established, one or more of the characteristics listed
| above have to be modified.
The mux category [RFC 8859] for the "tls-id" attribute is "IDENTICAL",
which means that the attribute value applies to all media
descriptions being multiplexed [RFC 8843]. However, as described in
[RFC 8843], in order to avoid duplication, the attribute is only
associated with the "m=" line representing the offerer/answerer
BUNDLE tag.
For RTP-based media, the "tls-id" attribute applies to the whole
associated media description. The attribute MUST NOT be defined per
source (using the SDP "ssrc" attribute [RFC 5576]).
The SDP offer/answer procedures [RFC 3264] associated with the
attribute are defined in Section 5.
5. SDP Offer/Answer Procedures
5.1. General
This section defines the generic SDP offer/answer procedures for
negotiating a DTLS association. Additional procedures (e.g.,
regarding usage of specific SDP attributes) for individual DTLS
usages (e.g., DTLS-SRTP) are outside the scope of this specification
and need to be specified in a usage-specific document.
| NOTE: The procedures in this section are generalizations of
| procedures first specified in the DTLS-SRTP document [RFC 5763],
| with the addition of usage of the SDP "tls-id" attribute. That
| document is herein updated to make use of these new procedures.
The procedures in this section apply to an SDP media description
("m=" line) associated with DTLS-protected media/data.
When an offerer or answerer indicates that it wants to establish a
new DTLS association, it needs to make sure that media packets
associated with any previously established DTLS association and the
new DTLS association can be demultiplexed. In the case of an ordered
transport (e.g., SCTP), this can be done simply by sending packets
for the new DTLS association after all packets associated with a
previously established DTLS association have been sent. In the case
of an unordered transport, such as UDP, packets associated with a
previously established DTLS association can arrive after the answer
SDP and the first packets associated with the new DTLS association
have been received. The only way to demultiplex packets associated
with a previously established DTLS association and the new DTLS
association is on the basis of the 5-tuple. Because of this, if an
unordered transport is used for the DTLS association, a new 3-tuple
(transport/source address/source port) MUST be allocated by at least
one of the endpoints so that DTLS packets can be demultiplexed.
When an offerer needs to establish a new DTLS association, and if an
unordered transport (e.g., UDP) is used, the offerer MUST allocate a
new 3-tuple for the offer in such a way that the offerer can
disambiguate any packets associated with the new DTLS association
from any packets associated with any other DTLS association. This
typically means using a local address and/or port, or a set of ICE
candidates (see Section 6), which were not recently used for any
other DTLS association.
When an answerer needs to establish a new DTLS association, if an
unordered transport is used, and the offerer did not allocate a new
3-tuple, the answerer MUST allocate a new 3-tuple for the answer in
such a way that it can disambiguate any packets associated with the
new DTLS association from any packets associated with any other DTLS
association. This typically means using a local address and/or port,
or a set of ICE candidates (see Section 6), which were not recently
used for any other DTLS association.
In order to negotiate a DTLS association, the following SDP
attributes are used:
* The SDP "setup" attribute, defined in [RFC 4145], is used to
negotiate the DTLS roles;
* The SDP "fingerprint" attribute, defined in [RFC 8122], is used to
provide one or more fingerprint values; and
* The SDP "tls-id" attribute, defined in this specification, is used
to identity the DTLS association.
This specification does not define the usage of the SDP "connection"
attribute [RFC 4145] for negotiating a DTLS association. However, the
attribute MAY be used if the DTLS association is used together with
another protocol (e.g., SCTP or TCP) for which the usage of the
attribute has been defined.
Unlike for TCP and TLS connections, endpoints MUST NOT use the SDP
"setup" attribute "holdconn" value when negotiating a DTLS
association.
Endpoints MUST support the hash functions as defined in [RFC 8122].
The certificate received during the DTLS handshake [RFC 6347] MUST
match a certificate fingerprint received in SDP "fingerprint"
attributes according to the procedures defined in [RFC 8122]. If
fingerprints do not match the hashed certificate, then an endpoint
MUST tear down the media session immediately (see [RFC 8122]).
SDP offerers and answerers might reuse certificates across multiple
DTLS associations, and provide identical fingerprint values for each
DTLS association. The combination of the SDP "tls-id" attribute
values of the SDP offerer and answerer identifies each individual
DTLS association.
| NOTE: There are cases where the SDP "tls-id" attribute value
| generated by the offerer will end up being used for multiple
| DTLS associations. For that reason, the combination of the
| attribute values of the offerer and answerer is needed in order
| to identity a DTLS association. An example of such a case is
| where the offerer sends an updated offer (Section 5.5) without
| modifying its attribute value, but the answerer determines that
| a new DTLS association is to be created. The answerer will
| generate a new local attribute value for the new DTLS
| association (Section 5.3), while the offerer will use the same
| attribute value that it used for the current association.
| Another example is when the Session Initiation Protocol (SIP)
| [RFC 3261] is used for signaling, and an offer is forked to
| multiple answerers. The attribute value generated by the
| offerer will be used for DTLS associations established by each
| answerer.
5.2. Generating the Initial SDP Offer
When an offerer sends the initial offer, the offerer MUST insert an
SDP "setup" attribute [RFC 4145] with an "actpass" attribute value, as
well as one or more SDP "fingerprint" attributes according to the
procedures in [RFC 8122]. In addition, the offerer MUST insert in the
offer an SDP "tls-id" attribute with a unique attribute value.
As the offerer inserts the SDP "setup" attribute with an "actpass"
attribute value, the offerer MUST be prepared to receive a DTLS
ClientHello message [RFC 6347] from the answerer (if a new DTLS
association is established by the answerer) before the offerer
receives the SDP answer.
If the offerer receives a DTLS ClientHello message, and a DTLS
association is established before the offerer receives the SDP answer
carrying the fingerprint associated with the DTLS association, any
data received on the DTLS association before the fingerprint MUST be
considered to be coming from an unverified source. The processing of
such data and sending of data by the offerer to the unverified source
is outside the scope of this document.
5.3. Generating the Answer
When an answerer sends an answer, the answerer MUST insert in the
answer an SDP "setup" attribute according to the procedures in
[RFC 4145] and one or more SDP "fingerprint" attributes according to
the procedures in [RFC 8122]. If the answerer determines, based on
the criteria specified in Section 3.1, that a new DTLS association is
to be established, the answerer MUST insert in the associated answer
an SDP "tls-id" attribute with a new unique attribute value. Note
that the offerer and answerer generate their own local "tls-id"
attribute values, and the combination of both values identifies the
DTLS association.
If the answerer receives an offer that requires establishment of a
new DTLS association, and if the answerer does not accept the
establishment of a new DTLS association, the answerer MUST reject the
"m=" lines associated with the suggested DTLS association [RFC 3264].
If an answerer receives an offer that does not require the
establishment of a new DTLS association, and if the answerer
determines that a new DTLS association is not to be established, the
answerer MUST insert in the associated answer an SDP "tls-id"
attribute with the previously assigned attribute value. In addition,
the answerer MUST insert an SDP "setup" attribute with an attribute
value that does not change the previously negotiated DTLS roles, as
well as one or more SDP "fingerprint" attributes values that do not
change the previously sent fingerprint set, in the associated answer.
If the answerer receives an offer that does not contain an SDP "tls-
id" attribute, the answerer MUST NOT insert a "tls-id" attribute in
the answer.
If a new DTLS association is to be established, and if the answerer
inserts an SDP "setup" attribute with an "active" attribute value in
the answer, the answerer MUST initiate a DTLS handshake [RFC 6347] by
sending a DTLS ClientHello message towards the offerer.
Even though an offerer is required to insert an "SDP" setup attribute
with an "actpass" attribute value in initial offers (Section 5.2) and
subsequent offers (Section 5.5), the answerer MUST be able to receive
initial and subsequent offers with other attribute values, in order
to be backward compatible with older implementations that might
insert other attribute values in initial and subsequent offers.
5.4. Offerer Processing of the SDP Answer
When an offerer receives an answer that establishes a new DTLS
association based on criteria defined in Section 3.1, if the offerer
becomes DTLS client (based on the value of the SDP "setup" attribute
value [RFC 4145]), the offerer MUST establish a DTLS association. If
the offerer becomes DTLS server, it MUST wait for the answerer to
establish the DTLS association.
If the offerer indicated a desire to reuse an existing DTLS
association, and the answerer does not request the establishment of a
new DTLS association, the offerer will continue to use the previously
established DTLS association.
A new DTLS association can be established based on changes in either
an SDP offer or answer. When communicating with legacy endpoints, an
offerer can receive an answer that includes the same fingerprint set
and setup role. A new DTLS association will still be established if
such an answer is received as a response to an offer that requested
the establishment of a new DTLS association, as the transport
parameters would have been changed in the offer.
5.5. Modifying the Session
When an offerer sends a subsequent offer, if the offerer wants to
establish a new DTLS association, the offerer MUST insert an SDP
"setup" attribute [RFC 4145] with an "actpass" attribute value, as
well as or more SDP "fingerprint" attributes according to the
procedures in [RFC 8122]. In addition, the offerer MUST insert in the
offer an SDP "tls-id" attribute with a new unique attribute value.
When an offerer sends a subsequent offer and does not want to
establish a new DTLS association, if a previously established DTLS
association exists, the offerer MUST insert in the offer an SDP
"setup" attribute with an "actpass" attribute value, and one or more
SDP "fingerprint" attributes with attribute values that do not change
the previously sent fingerprint set. In addition, the offerer MUST
insert an SDP "tls-id" attribute with the previously assigned
attribute value in the offer.
| NOTE: When a new DTLS association is being established, each
| endpoint needs to be prepared to receive data on both the new
| and old DTLS associations as long as both are alive.
6. ICE Considerations
When the Interactive Connectivity Establishment (ICE) mechanism
[RFC 8445] is used, the ICE connectivity checks are performed before
the DTLS handshake begins. Note that if aggressive nomination mode
is used, multiple candidate pairs may be marked valid before ICE
finally converges on a single candidate pair.
| NOTE: Aggressive nomination has been deprecated from ICE but
| must still be supported for backwards compatibility reasons
| [RFC 8445].
When a new DTLS association is established over an unordered
transport, in order to disambiguate any packets associated with the
newly established DTLS association, at least one of the endpoints
MUST allocate a completely new set of ICE candidates that were not
recently used for any other DTLS association. This means the
answerer cannot initiate a new DTLS association unless the offerer
initiated ICE restart [RFC 8445]. If the answerer wants to initiate a
new DTLS association, it needs to initiate an ICE restart and a new
offer/answer exchange on its own. However, an ICE restart does not
by default require a new DTLS association to be established.
| NOTE: Simple Traversal of the UDP Protocol through NAT (STUN)
| packets are sent directly over UDP, not over DTLS. [RFC 7983]
| describes how to demultiplex STUN packets from DTLS packets and
| SRTP packets.
Each ICE candidate associated with a component is treated as being
part of the same DTLS association. Therefore, from a DTLS
perspective, it is not considered a change of local transport
parameters when an endpoint switches between those ICE candidates.
7. TLS Considerations
The procedures in this document can also be used for negotiating and
establishing a TLS connection, with the restriction described below.
As specified in [RFC 4145], the SDP "connection" attribute is used to
indicate whether to establish a new TLS connection. An offerer and
answerer MUST ensure that the "connection" attribute value and the
"tls-id" attribute value do not cause a conflict regarding whether a
new TLS connection is to be established or not.
| NOTE: Even though the SDP "connection" attribute can be used to
| indicate whether a new TLS connection is to be established, the
| unique combination of SDP "tls-id" attribute values can be used
| to identity a TLS connection. The unique value can be used
| e.g., within TLS protocol extensions to differentiate between
| multiple TLS connections and correlate those connections with
| specific offer/answer exchanges. One such extension is defined
| in [RFC 8844].
If an offerer or answerer inserts an SDP "connection" attribute with
a "new" value in the offer/answer and also inserts an SDP "tls-id"
attribute, the value of the "tls-id" attribute MUST be new and
unique.
If an offerer or answerer inserts an SDP "connection" attribute with
an "existing" value in the offer/answer, if a previously established
TLS connection exists, and if the offerer/answerer previously
inserted an SDP "tls-id" attribute associated with the same TLS
connection in an offer/answer, the offerer/answerer MUST also insert
an SDP "tls-id" attribute with the previously assigned value in the
offer/answer.
If an offerer or answerer receives an offer/answer with conflicting
attribute values, the offerer/answerer MUST process the offer/answer
as misformed.
An endpoint MUST NOT make assumptions regarding the support of the
SDP "tls-id" attribute by the peer. Therefore, to avoid ambiguity,
both offerers and answerers MUST always use the "connection"
attribute in conjunction with the "tls-id" attribute.
| NOTE: As defined in [RFC 4145], if the SDP "connection"
| attribute is not explicitly present, the implicit default value
| is "new".
The SDP example below is based on the example in Section 3.4 of
[RFC 8122], with the addition of the SDP "tls-id" attribute.
m=image 54111 TCP/TLS t38
c=IN IP4 192.0.2.2
a=tls-id:abc3de65cddef001be82
a=setup:passive
a=connection:new
a=fingerprint:SHA-256 \
12:DF:3E:5D:49:6B:19:E5:7C:AB:4A:AD:B9:B1:3F:82:18:3B:54:02:12:DF: \
3E:5D:49:6B:19:E5:7C:AB:4A:AD
a=fingerprint:SHA-1 \
4A:AD:B9:B1:3F:82:18:3B:54:02:12:DF:3E:5D:49:6B:19:E5:7C:AB
8. SIP Considerations
When the Session Initiation Protocol (SIP) [RFC 3261] is used as the
signal protocol for establishing a multimedia session, dialogs
[RFC 3261] might be established between the caller and multiple
callees. This is referred to as forking. If forking occurs,
separate DTLS associations will be established between the caller and
each callee.
When forking occurs, an SDP offerer can receive DTLS ClientHello
messages and SDP answers from multiple remote locations. Because of
this, the offerer might have to wait for multiple SDP answers (from
different remote locations) until it receives a certificate
fingerprint that matches the certificate associated with a specific
DTLS handshake. The offerer MUST NOT declare a fingerprint mismatch
until it determines that it will not receive SDP answers from any
additional remote locations.
It is possible to send an INVITE request that does not contain an SDP
offer. Such an INVITE request is often referred to as an "empty
INVITE" or an "offerless INVITE". The receiving endpoint will
include the SDP offer in a response to the request. When the
endpoint generates such an SDP offer, if a previously established
DTLS association exists, the offerer MUST insert an SDP "tls-id"
attribute and one or more SDP "fingerprint" attributes, with
previously assigned attribute values. If a previously established
DTLS association does not exist, the offer MUST be generated based on
the same rules as a new offer (see Section 5.2). Regardless of the
previous existence of a DTLS association, the SDP "setup" attribute
MUST be included according to the rules defined in [RFC 4145].
Furthermore, if ICE is used, ICE restart MUST be initiated, according
to the third-party call-control considerations described in
[RFC 8839].
9. RFC Updates
9.1. General
This section updates specifications that use DTLS-protected media, in
order to reflect the procedures defined in this specification.
9.2. Update to RFC 5763
9.2.1. Update to Section 1
The reference to [RFC 4572] is replaced with a reference to [RFC 8122].
9.2.2. Update to Section 5
The text in [RFC 5763], Section 5 ("Establishing a Secure Channel") is
modified by replacing generic SDP offer/answer procedures for DTLS
with a reference to this specification:
NEW TEXT:
| The two endpoints in the exchange present their identities as part
| of the DTLS handshake procedure using certificates. This document
| uses certificates in the same style as described in "Connection-
| Oriented Media Transport over the Transport Layer Security (TLS)
| Protocol in the Session Description Protocol (SDP)" [RFC 8122].
|
| If self-signed certificates are used, the content of the
| "subjectAltName" attribute inside the certificate MAY use the
| uniform resource identifier (URI) of the user. This is useful for
| debugging purposes only and is not required to bind the
| certificate to one of the communication endpoints. The integrity
| of the certificate is ensured through the "fingerprint" attribute
| in the SDP.
|
| The generation of public/private key pairs is relatively
| expensive. Endpoints are not required to generate certificates
| for each session.
|
| The offer/answer model, defined in [RFC 3264], is used by protocols
| like the Session Initiation Protocol (SIP) [RFC 3261] to set up
| multimedia sessions.
|
| When an endpoint wishes to set up a secure media session with
| another endpoint, it sends an offer in a SIP message to the other
| endpoint. This offer includes, as part of the SDP payload, a
| fingerprint of a certificate that the endpoint wants to use. The
| endpoint SHOULD send the SIP message containing the offer to the
| offerer's SIP proxy over an integrity-protected channel. The
| proxy SHOULD add an Identity header field according to the
| procedures outlined in [RFC 4474]. When the far endpoint receives
| the SIP message, it can verify the identity of the sender using
| the Identity header field. Since the Identity header field is a
| digital signature across several SIP header fields, in addition to
| the body of the SIP message, the receiver can also be certain that
| the message has not been tampered with after the digital signature
| was applied and added to the SIP message.
|
| The far endpoint (answerer) may now establish a DTLS association
| with the offerer. Alternately, it can indicate in its answer that
| the offerer is to initiate the DTLS association. In either case,
| mutual DTLS certificate-based authentication will be used. After
| completing the DTLS handshake, information about the authenticated
| identities, including the certificates, is made available to the
| endpoint application. The answerer is then able to verify that
| the offerer's certificate used for authentication in the DTLS
| handshake can be associated with a certificate fingerprint
| contained in the offer in the SDP. At this point, the answerer
| may indicate to the end user that the media is secured. The
| offerer may only tentatively accept the answerer's certificate,
| since it may not yet have the answerer's certificate fingerprint
|
| When the answerer accepts the offer, it provides an answer back to
| the offerer containing the answerer's certificate fingerprint. At
| this point, the offerer can accept or reject the peer's
| certificate, and the offerer can indicate to the end user that the
| media is secured.
|
| Note that the entire authentication and key exchange for securing
| the media traffic is handled in the media path through DTLS. The
| signaling path is only used to verify the peers' certificate
| fingerprints.
|
| The offerer and answerer MUST follow the SDP offer/answer
| procedures defined in RFC 8842.
9.2.3. Update to Section 6.6
The text in [RFC 5763], Section 6.6 ("Session Modification") is
modified by replacing generic SDP offer/answer procedures for DTLS
with a reference to this specification:
NEW TEXT:
| Once an answer is provided to the offerer, either endpoint MAY
| request a session modification that MAY include an updated offer.
| This session modification can be carried in either an INVITE or
| UPDATE request. The peers can reuse an existing DTLS association
| or establish a new one, following the procedures in RFC 8842.
9.2.4. Update to Section 6.7.1
The text in [RFC 5763], Section 6.7.1 ("ICE Interaction") is modified
by replacing the ICE procedures with a reference to this
specification:
NEW TEXT:
| The Interactive Connectivity Establishment (ICE) [RFC 8445]
| considerations for DTLS-protected media are described in RFC 8842.
9.3. Update to RFC 7345
9.3.1. Update to Section 4
The subsections (4.1 - 4.5) in [RFC 7345], Section 4 ("SDP Offerer/
Answerer Procedures") are removed and replaced with the new text
below:
NEW TEXT:
| An endpoint (i.e., both the offerer and the answerer) MUST create
| an SDP media description ("m=" line) for each UDPTL-over-DTLS
| media stream and MUST assign a UDP/TLS/UDPTL value (see Table 1)
| to the "proto" field of the "m=" line.
|
| The offerer and answerer MUST follow the SDP offer/answer
| procedures defined in RFC 8842 in order to negotiate the DTLS
| association associated with the UDPTL-over-DTLS media stream. In
| addition, the offerer and answerer MUST use the SDP attributes
| defined for UDPTL over UDP, as defined in [ITU.T38].
9.3.2. Update to Section 5.2.1
The text in [RFC 7345], Section 5.2.1 ("ICE Usage") is modified by
replacing the ICE procedures with a reference to this specification:
NEW TEXT:
| The Interactive Connectivity Establishment (ICE) [RFC 8445]
| considerations for DTLS-protected media are described in RFC 8842.
9.3.3. Update to Section 9.1
A reference to [RFC 8122] is added to [RFC 7345], Section 9.1
("Normative References"):
NEW TEXT:
| [RFC 8122] Lennox, J. and C. Holmberg, "Connection-Oriented
| Media Transport over the Transport Layer Security
| (TLS) Protocol in the Session Description Protocol
| (SDP)", RFC 8122, DOI 10.17487/RFC 8122, March 2017,
| <https://www.rfc-editor.org/info/RFC 8122>.
10. Security Considerations
This specification does not modify the security considerations
associated with DTLS or the SDP offer/answer mechanism. In addition
to the introduction of the SDP "tls-id" attribute, this document
simply clarifies the procedures for negotiating and establishing a
DTLS association.
This specification does not modify the actual TLS connection setup
procedures. The SDP "tls-is" attribute as such cannot be used to
correlate an SDP offer/answer exchange with a TLS connection setup.
Thus, this document does not introduce new security considerations
related to correlating an SDP offer/answer exchange with a TLS
connection setup.
11. IANA Considerations
This document updates the "Session Description Protocol Parameters"
registry as specified in Section 8.2.2 of [RFC 4566]. Specifically,
it adds the SDP "tls-id" attribute to the table for SDP media-level
attributes as follows.
Attribute name: tls-id
Type of attribute: Media-level
Subject to charset: No
Purpose: Indicates whether a new DTLS association or TLS connection
is to be established/re-established.
Appropriate Values: See Section 4
Contact name: Christer Holmberg
Mux Category: IDENTICAL
12. References
12.1. Normative References
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC 2119, March 1997,
<https://www.rfc-editor.org/info/RFC 2119>.
[RFC 3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and E.
Schooler, "SIP: Session Initiation Protocol", RFC 3261,
DOI 10.17487/RFC 3261, June 2002,
<https://www.rfc-editor.org/info/RFC 3261>.
[RFC 3264] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model
with Session Description Protocol (SDP)", RFC 3264,
DOI 10.17487/RFC 3264, June 2002,
<https://www.rfc-editor.org/info/RFC 3264>.
[RFC 4145] Yon, D. and G. Camarillo, "TCP-Based Media Transport in
the Session Description Protocol (SDP)", RFC 4145,
DOI 10.17487/RFC 4145, September 2005,
<https://www.rfc-editor.org/info/RFC 4145>.
[RFC 4566] Handley, M., Jacobson, V., and C. Perkins, "SDP: Session
Description Protocol", RFC 4566, DOI 10.17487/RFC 4566,
July 2006, <https://www.rfc-editor.org/info/RFC 4566>.
[RFC 5763] Fischl, J., Tschofenig, H., and E. Rescorla, "Framework
for Establishing a Secure Real-time Transport Protocol
(SRTP) Security Context Using Datagram Transport Layer
Security (DTLS)", RFC 5763, DOI 10.17487/RFC 5763, May
2010, <https://www.rfc-editor.org/info/RFC 5763>.
[RFC 6347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security Version 1.2", RFC 6347, DOI 10.17487/RFC 6347,
January 2012, <https://www.rfc-editor.org/info/RFC 6347>.
[RFC 7345] Holmberg, C., Sedlacek, I., and G. Salgueiro, "UDP
Transport Layer (UDPTL) over Datagram Transport Layer
Security (DTLS)", RFC 7345, DOI 10.17487/RFC 7345, August
2014, <https://www.rfc-editor.org/info/RFC 7345>.
[RFC 8122] Lennox, J. and C. Holmberg, "Connection-Oriented Media
Transport over the Transport Layer Security (TLS) Protocol
in the Session Description Protocol (SDP)", RFC 8122,
DOI 10.17487/RFC 8122, March 2017,
<https://www.rfc-editor.org/info/RFC 8122>.
[RFC 8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC 8174,
May 2017, <https://www.rfc-editor.org/info/RFC 8174>.
[RFC 8445] Keranen, A., Holmberg, C., and J. Rosenberg, "Interactive
Connectivity Establishment (ICE): A Protocol for Network
Address Translator (NAT) Traversal", RFC 8445,
DOI 10.17487/RFC 8445, July 2018,
<https://www.rfc-editor.org/info/RFC 8445>.
[RFC 8843] Holmberg, C., Alvestrand, H., and C. Jennings,
"Negotiating Media Multiplexing Using the Session
Description Protocol (SDP)", RFC 8843,
DOI 10.17487/RFC 8843, January 2021,
<https://www.rfc-editor.org/info/RFC 8843>.
[RFC 8859] Nandakumar, S., "A Framework for Session Description
Protocol (SDP) Attributes When Multiplexing", RFC 8859,
DOI 10.17487/RFC 8859, January 2021,
<https://www.rfc-editor.org/info/RFC 8859>.
12.2. Informative References
[ITU.T38] ITU-T, "Procedures for real-time Group 3 facsimile
communication over IP networks", Recommendation T.38,
September 2010, <https://www.itu.int/rec/T-REC-T.38/en>.
[RFC 4474] Peterson, J. and C. Jennings, "Enhancements for
Authenticated Identity Management in the Session
Initiation Protocol (SIP)", RFC 4474,
DOI 10.17487/RFC 4474, August 2006,
<https://www.rfc-editor.org/info/RFC 4474>.
[RFC 4572] Lennox, J., "Connection-Oriented Media Transport over the
Transport Layer Security (TLS) Protocol in the Session
Description Protocol (SDP)", RFC 4572,
DOI 10.17487/RFC 4572, July 2006,
<https://www.rfc-editor.org/info/RFC 4572>.
[RFC 5576] Lennox, J., Ott, J., and T. Schierl, "Source-Specific
Media Attributes in the Session Description Protocol
(SDP)", RFC 5576, DOI 10.17487/RFC 5576, June 2009,
<https://www.rfc-editor.org/info/RFC 5576>.
[RFC 6083] Tuexen, M., Seggelmann, R., and E. Rescorla, "Datagram
Transport Layer Security (DTLS) for Stream Control
Transmission Protocol (SCTP)", RFC 6083,
DOI 10.17487/RFC 6083, January 2011,
<https://www.rfc-editor.org/info/RFC 6083>.
[RFC 7983] Petit-Huguenin, M. and G. Salgueiro, "Multiplexing Scheme
Updates for Secure Real-time Transport Protocol (SRTP)
Extension for Datagram Transport Layer Security (DTLS)",
RFC 7983, DOI 10.17487/RFC 7983, September 2016,
<https://www.rfc-editor.org/info/RFC 7983>.
[RFC 8224] Peterson, J., Jennings, C., Rescorla, E., and C. Wendt,
"Authenticated Identity Management in the Session
Initiation Protocol (SIP)", RFC 8224,
DOI 10.17487/RFC 8224, February 2018,
<https://www.rfc-editor.org/info/RFC 8224>.
[RFC 8839] Petit-Huguenin, M., Nandakumar, S., Holmberg, C., Keränen,
A., and R. Shpount, "Session Description Protocol (SDP)
Offer/Answer Procedures for Interactive Connectivity
Establishment (ICE)", RFC 8839, DOI 10.17487/RFC 8839,
January 2021, <https://www.rfc-editor.org/info/RFC 8839>.
[RFC 8844] Thomson, M. and E. Rescorla, "Unknown Key-Share Attacks on
Uses of TLS with the Session Description Protocol (SDP)",
RFC 8844, DOI 10.17487/RFC 8844, January 2021,
<https://www.rfc-editor.org/info/RFC 8844>.
Acknowledgements
Thanks to Justin Uberti, Martin Thomson, Paul Kyzivat, Jens Guballa,
Charles Eckel, Gonzalo Salgueiro, and Paul Jones for providing
comments and suggestions on the document. Ben Campbell performed an
Area Director review. Paul Kyzivat performed a Gen-ART review.
Authors' Addresses
Christer Holmberg
Ericsson
Hirsalantie 11
FI-02420 Jorvas
Finland
Email: christer.holmberg@ericsson.com
Roman Shpount
TurboBridge
4905 Del Ray Avenue, Suite 300
Bethesda, MD 20814
United States of America
Email: rshpount@turbobridge.com
RFC TOTAL SIZE: 44397 bytes
PUBLICATION DATE: Monday, January 18th, 2021
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
