The RFC Archive
 The RFC Archive   RFC 8310   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 8310

Usage Profiles for DNS over TLS and DNS over DTLS

Last modified on Wednesday, March 21st, 2018

Permanent link to RFC 8310
Search GitHub Wiki for RFC 8310
Show other RFCs mentioning RFC 8310







Internet Engineering Task Force (IETF)                      S. Dickinson
Request for Comments: 8310                                       Sinodun
Updates: 7858                                                 D. Gillmor
Category: Standards Track                                         ACLU
ISSN: 2070-1721                                                 T. Reddy
                                                                  McAfee
                                                              March 2018


           Usage Profiles for DNS over TLS and DNS over DTLS

 Abstract

   This document discusses usage profiles, based on one or more
   authentication mechanisms, which can be used for DNS over Transport
   Layer Security (TLS) or Datagram TLS (DTLS).  These profiles can
   increase the privacy of DNS transactions compared to using only
   cleartext DNS.  This document also specifies new authentication
   mechanisms -- it describes several ways that a DNS client can use an
   authentication domain name to authenticate a (D)TLS connection to a
   DNS server.  Additionally, it defines (D)TLS protocol profiles for
   DNS clients and servers implementing DNS over (D)TLS.  This document
   updates RFC 7858.

 Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/RFC 8310.














Dickinson, et al.            Standards Track                 PAGE 1 top


RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Dickinson, et al. Standards Track PAGE 2 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 Table of Contents 1. Introduction ....................................................4 2. Terminology .....................................................6 3. Scope ...........................................................7 4. Discussion ......................................................8 5. Usage Profiles ..................................................8 5.1. DNS Resolution ............................................11 6. Authentication in DNS over (D)TLS ..............................11 6.1. DNS-over-(D)TLS Startup Configuration Problems ............11 6.2. Credential Verification ...................................12 6.3. Summary of Authentication Mechanisms ......................12 6.4. Combining Authentication Mechanisms .......................15 6.5. Authentication in Opportunistic Privacy ...................15 6.6. Authentication in Strict Privacy ..........................16 6.7. Implementation Guidance ...................................16 7. Sources of Authentication Domain Names .........................17 7.1. Full Direct Configuration .................................17 7.2. Direct Configuration of ADN Only ..........................17 7.3. Dynamic Discovery of ADN ..................................17 7.3.1. DHCP ...............................................18 8. Credential Verification Based on Authentication Domain Name ....18 8.1. Authentication Based on PKIX Certificate ..................18 8.2. DANE ......................................................19 8.2.1. Direct DNS Meta-Queries ............................20 8.2.2. TLS DNSSEC Chain Extension .........................20 9. (D)TLS Protocol Profile ........................................20 10. IANA Considerations ...........................................21 11. Security Considerations .......................................21 11.1. Countermeasures to DNS Traffic Analysis ..................22 12. References ....................................................22 12.1. Normative References .....................................22 12.2. Informative References ...................................24 Appendix A. Server Capability Probing and Caching by DNS Clients ..26 Acknowledgments ...................................................27 Authors' Addresses ................................................27 Dickinson, et al. Standards Track PAGE 3 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 1. Introduction DNS privacy issues are discussed in [RFC 7626]. The specific issues described in [RFC 7626] that are most relevant to this document are o Passive attacks that eavesdrop on cleartext DNS transactions on the wire (Section 2.4 of [RFC 7626]) and o Active attacks that redirect clients to rogue servers to monitor DNS traffic (Section 2.5.3 of [RFC 7626]). Mitigating these attacks increases the privacy of DNS transactions; however, many of the other issues raised in [RFC 7626] still apply. Two documents that provide ways to increase DNS privacy between DNS clients and DNS servers are o "Specification for DNS over Transport Layer Security (TLS)" [RFC 7858], referred to here as simply "DNS over TLS". o "DNS over Datagram Transport Layer Security (DTLS)" [RFC 8094], referred to here as simply "DNS over DTLS". Note that [RFC 8094] is an Experimental specification. Both documents are limited in scope to communications between stub clients and recursive resolvers, and the same scope is applied to this document (see Sections 2 and 3). The proposals here might be adapted or extended in future to be used for recursive clients and authoritative servers, but this application was out of scope for the DNS PRIVate Exchange (dprive) Working Group charter at the time this document was published. This document specifies two usage profiles (Strict Privacy and Opportunistic Privacy) for DTLS [RFC 6347] and TLS [RFC 5246] that provide improved levels of mitigation for the attacks described above compared to using only cleartext DNS. Section 5 presents a generalized discussion of usage profiles by separating the usage profile, which is based purely on the security properties it offers the user, from the specific mechanism or mechanisms that are used for DNS server authentication. The profiles described are o A Strict Privacy profile, which requires an encrypted connection and successful authentication of the DNS server; this mitigates both passive eavesdropping and client redirection (at the expense of providing no DNS service if an encrypted, authenticated connection is not available). Dickinson, et al. Standards Track PAGE 4 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 o An Opportunistic Privacy profile, which will attempt, but does not require, encryption and successful authentication; it therefore provides limited or no mitigation for such attacks but maximizes the chance of DNS service. The above usage profiles attempt authentication of the server using at least one authentication mechanism. Section 6.4 discusses how to combine authentication mechanisms to determine the overall authentication result. Depending on that overall authentication result (and whether encryption is available), the usage profile will determine if the connection should proceed, fall back, or fail. One authentication mechanism is already described in [RFC 7858]. [RFC 7858] specifies an authentication mechanism for DNS over TLS that is based on Subject Public Key Info (SPKI) in the context of a specific case of a Strict Privacy profile using that single authentication mechanism. Therefore, the "out-of-band key-pinned privacy profile" described in [RFC 7858] would qualify as a "Strict Privacy profile" that used SPKI pinning for authentication. This document extends the use of authentication based on SPKI pin sets, so that it is considered a general authentication mechanism that can be used with either DNS-over-(D)TLS usage profile. That is, the mechanism for SPKI pin sets as described in [RFC 7858] MAY be used with DNS over (D)TLS. This document also describes a number of additional authentication mechanisms, all of which specify how a DNS client should authenticate a DNS server based on an "authentication domain name". In particular, the following topics are described: o How a DNS client can obtain the combination of an authentication domain name and IP address for a DNS server. See Section 7. o What acceptable credentials a DNS server can present to prove its identity for (D)TLS authentication based on a given authentication domain name. See Section 8. o How a DNS client can verify that any given credential matches the authentication domain name obtained for a DNS server. See Section 8. This document defines a (D)TLS protocol profile for use with DNS; see Section 9. This profile defines the configuration options and protocol extensions required of both parties to (1) optimize connection establishment and session resumption for transporting DNS and (2) support all currently specified authentication mechanisms. Dickinson, et al. Standards Track PAGE 5 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC 2119] [RFC 8174] when, and only when, they appear in all capitals, as shown here. Several terms are used specifically in the context of this document: o DNS client: A DNS stub resolver or forwarder. In the case of a forwarder, the term "DNS client" is used to discuss the side that sends queries. o DNS server: A DNS recursive resolver or forwarder. In the case of a forwarder, the term "DNS server" is used to discuss the side that responds to queries. Note that, as used in this document, this term does not apply to authoritative servers. o Privacy-enabling DNS server: A DNS server that implements DNS over TLS [RFC 7858] and may optionally implement DNS over DTLS [RFC 8094]. The server should also offer at least one of the credentials described in Section 8 and implement the (D)TLS profile described in Section 9. o (D)TLS: Used for brevity; refers to both Transport Layer Security [RFC 5246] and Datagram Transport Layer Security [RFC 6347]. Specific terms will be used for any text that applies to either protocol alone. o DNS over (D)TLS: Used for brevity; refers to both DNS over TLS [RFC 7858] and DNS over DTLS [RFC 8094]. Specific terms will be used for any text that applies to either protocol alone. o Authentication domain name: A domain name that can be used to authenticate a privacy-enabling DNS server. Sources of authentication domain names are discussed in Section 7. o SPKI pin sets: [RFC 7858] describes the use of cryptographic digests to "pin" public key information in a manner similar to HTTP Public Key Pinning (HPKP) [RFC 7469]. An SPKI pin set is a collection of these pins that constrains a DNS server. Dickinson, et al. Standards Track PAGE 6 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 o Authentication information: Information a DNS client may use as the basis of an authentication mechanism. In this context, this information can be either * an SPKI pin set or * an authentication domain name o Reference identifier: A reference identifier as described in [RFC 6125], constructed by the DNS client when performing TLS authentication of a DNS server. o Credential: Information available for a DNS server that proves its identity for authentication purposes. Credentials discussed here include * a PKIX certificate * a DNSSEC-validated chain to a TLSA record but may also include SPKI pin sets. 3. Scope This document is limited to describing o Usage profiles based on general authentication mechanisms. o The details of domain-name-based authentication of DNS servers by DNS clients (as defined in Section 2). o The (D)TLS profiles needed to support authentication in DNS over (D)TLS. As such, the following topics are out of scope for this document: o Authentication of authoritative servers by recursive resolvers. o Authentication of DNS clients by DNS servers. o The details of how to perform authentication based on SPKI pin sets. This is defined in [RFC 7858]. o Any server identifier other than domain names, including IP addresses, organizational names, country of origin, etc. Dickinson, et al. Standards Track PAGE 7 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 4. Discussion One way to mitigate eavesdropping on cleartext DNS transactions by passive attackers is to encrypt the query (and response). Such encryption typically provides integrity protection as a side effect; this means that on-path attackers cannot simply inject bogus DNS responses. To also mitigate active attackers pretending to be the server, the client must authenticate the (D)TLS connection to the server. This document discusses usage profiles, which provide differing levels of attack mitigation to DNS clients, based on the requirements for authentication and encryption, regardless of the context (for example, which network the client is connected to). A usage profile is a concept distinct from a usage policy or usage model; a usage policy or usage model might dictate which profile should be used in a particular context (enterprise vs. coffee shop), with a particular set of DNS servers or with reference to other external factors. A description of the variety of usage policies is out of scope for this document but may be the subject of future work. The term "privacy-enabling DNS server" is used throughout this document. This is a DNS server that o MUST implement DNS over TLS [RFC 7858]. o MAY implement DNS over DTLS [RFC 8094]. o SHOULD offer at least one of the credentials described in Section 8. o Implements the (D)TLS profile described in Section 9. 5. Usage Profiles A DNS client has a choice of usage profiles available to increase the privacy of DNS transactions. This choice is briefly discussed in both [RFC 7858] and [RFC 8094]. These usage profiles are o Strict Privacy profile: The DNS client requires both an encrypted and authenticated connection to a privacy-enabling DNS server. A hard failure occurs if this is not available. This requires the client to securely obtain authentication information it can use to authenticate the server. This profile mitigates both passive and active attacks, thereby providing the client with the best available privacy for DNS. This profile is discussed in detail in Section 6.6. Dickinson, et al. Standards Track PAGE 8 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 o Opportunistic Privacy profile: The DNS client uses Opportunistic Security as described in [RFC 7435]. * "... the use of cleartext as the baseline communication security policy, with encryption and authentication negotiated and applied to the communication when available." As described in [RFC 7435], it might result in * an encrypted and authenticated connection * an encrypted connection * a cleartext connection depending on the fallback logic of the client, the available authentication information, and the capabilities of the DNS server. In all these cases, the DNS client is willing to continue with a connection to the DNS server and perform resolution of queries. The use of Opportunistic Privacy is intended to support incremental deployment of increased privacy with a view to widespread adoption of the Strict Privacy profile. It should be employed when the DNS client might otherwise settle for cleartext; it provides the maximum protection available, depending on the combination of factors described above. If all the configured DNS servers are DNS privacy servers, then it can provide protection against passive attacks and might protect against active ones. Both profiles can include an initial meta-query (performed using Opportunistic Privacy) to obtain the IP address for the privacy- enabling DNS server to which the DNS client will subsequently connect. The rationale for permitting this for the Strict Privacy profile is that requiring such meta-queries to also be performed using the Strict Privacy profile would introduce significant deployment obstacles. However, it should be noted that in this scenario an active attack on the meta-query is possible. Such an attack could result in a Strict Privacy profile client connecting to a server it cannot authenticate (and therefore not obtaining DNS service) or an Opportunistic Privacy client connecting to a server controlled by the attacker. DNSSEC validation can detect the attack on the meta-query, which may result in the client not obtaining DNS service (for both usage profiles), depending on its DNSSEC validation policy. See Section 7.2 for more discussion. To compare the two usage profiles, Table 1 below shows a successful Strict Privacy profile alongside the three possible outcomes of an Opportunistic Privacy profile. In the best-case scenario for the Opportunistic Privacy profile (an authenticated and encrypted Dickinson, et al. Standards Track PAGE 9 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 connection), it is equivalent to the Strict Privacy profile. In the worst-case scenario, it is equivalent to cleartext. Clients using the Opportunistic Privacy profile SHOULD try for the best case but MAY fall back to the intermediate case and, eventually, the worst- case scenario, in order to obtain a response. One reason to fall back without trying every available privacy-enabling DNS server is if latency is more important than attack mitigation; see Appendix A. The Opportunistic Privacy profile therefore provides varying protection, depending on what kind of connection is actually used, including no attack mitigation at all. Note that there is no requirement in Opportunistic Security to notify the user regarding what type of connection is actually used; the "detection" described below is only possible if such connection information is available. However, if it is available and the user is informed that an unencrypted connection was used to connect to a server, then the user should assume (detect) that the connection is subject to both active and passive attacks, since the DNS queries are sent in cleartext. This might be particularly useful if a new connection to a certain server is unencrypted when all previous connections were encrypted. Similarly, if the user is informed that an encrypted but unauthenticated connection was used, then the user can detect that the connection may be subject to active attacks. In other words, for the cases where no protection is provided against an attacker (N), it is possible to detect that an attack might be happening (D). This is discussed in Section 6.5. +---------------+------------+------------------+-----------------+ | Usage Profile | Connection | Passive Attacker | Active Attacker | +---------------+------------+------------------+-----------------+ | Strict | A, E | P | P | | Opportunistic | A, E | P | P | | Opportunistic | E | P | N, D | | Opportunistic | | N, D | N, D | +---------------+------------+------------------+-----------------+ P == Protection; N == No protection; D == Detection is possible; A == Authenticated connection; E == Encrypted connection Table 1: Attack Protection by Usage Profile and Type of Attacker The Strict Privacy profile provides the best attack mitigation and therefore SHOULD always be implemented in DNS clients that implement the Opportunistic Privacy profile. A DNS client that implements DNS over (D)TLS SHOULD NOT be configured by default to use only cleartext. Dickinson, et al. Standards Track PAGE 10 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 The choice between the two profiles depends on a number of factors, including which is more important to the particular client: o DNS service, at the cost of no attack mitigation (Opportunistic Privacy) or o Best available attack mitigation, at the potential cost of no DNS service (Strict Privacy). Additionally, the two profiles require varying levels of configuration (or a trusted relationship with a provider) and DNS server capabilities; therefore, DNS clients will need to carefully select which profile to use based on their communication needs. A DNS server that implements DNS over (D)TLS SHOULD provide at least one credential (Section 2) so that those DNS clients that wish to use the Strict Privacy profile are able to do so. 5.1. DNS Resolution A DNS client SHOULD select a particular usage profile when resolving a query. A DNS client MUST NOT fall back from Strict Privacy to Opportunistic Privacy during the resolution of a given query, as this could invalidate the protection offered against attackers. It is anticipated that DNS clients will use a particular usage profile for all queries to all configured servers until an operational issue or policy update dictates a change in the profile used. 6. Authentication in DNS over (D)TLS This section describes authentication mechanisms and how they can be used in either Strict or Opportunistic Privacy for DNS over (D)TLS. 6.1. DNS-over-(D)TLS Startup Configuration Problems Many (D)TLS clients use PKIX authentication [RFC 6125] based on an authentication domain name for the server they are contacting. These clients typically first look up the server's network address in the DNS before making this connection. Such a DNS client therefore has a bootstrap problem, as it will typically only know the IP address of its DNS server. In this case, before connecting to a DNS server, a DNS client needs to learn the authentication domain name it should associate with the IP address of a DNS server for authentication purposes. Sources of authentication domain names are discussed in Section 7. Dickinson, et al. Standards Track PAGE 11 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 One advantage of this domain-name-based approach is that it encourages the association of stable, human-recognizable identifiers with secure DNS service providers. 6.2. Credential Verification Verification of SPKI pin sets is discussed in [RFC 7858]. In terms of domain-name-based verification, once an authentication domain name is known for a DNS server, a choice of authentication mechanisms can be used for credential verification. Section 8 discusses these mechanisms -- namely, PKIX certificate-based authentication and DNS-Based Authentication of Named Entities (DANE) -- in detail. Note that the use of DANE adds requirements on the ability of the client to get validated DNSSEC results. This is discussed in more detail in Section 8.2. 6.3. Summary of Authentication Mechanisms This section provides an overview of the various authentication mechanisms. Table 2 below indicates how the DNS client obtains information to use for authentication for each option: either statically via direct configuration or dynamically. Of course, the Opportunistic Privacy profile does not require authentication, and so a client using that profile may choose to connect to a privacy-enabling DNS server on the basis of just an IP address. Dickinson, et al. Standards Track PAGE 12 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 +---+------------+-------------+------------------------------------+ | # | Static | Dynamically | Short name: Description | | | Config | Obtained | | +---+------------+-------------+------------------------------------+ | 1 | SPKI + IP | | SPKI: SPKI pin set(s) and IP | | | | | address obtained out of band | | | | | [RFC 7858] | | | | | | | 2 | ADN + IP | | ADN: ADN and IP address obtained | | | | | out of band (see Section 7.1) | | | | | | | 3 | ADN | IP | ADN only: Opportunistic Privacy | | | | | meta-queries to a NP DNS server | | | | | for A/AAAA (see Section 7.2) | | | | | | | 4 | | ADN + IP | DHCP: DHCP configuration only (see | | | | | Section 7.3.1) | | | | | | | 5 | [ADN + IP] | [ADN + IP] | DANE: DNSSEC chain obtained via | | | | TLSA record | Opportunistic Privacy meta-queries | | | | | to NP DNS server (see Section | | | | | 8.2.1) | | | | | | | 6 | [ADN + IP] | [ADN + IP] | TLS extension: DNSSEC chain | | | | TLSA record | provided by PE DNS server in TLS | | | | | DNSSEC chain extension (see | | | | | Section 8.2.2) | +---+------------+-------------+------------------------------------+ SPKI == SPKI pin set(s); IP == IP Address; ADN == Authentication Domain Name; NP == Network-Provided; PE == Privacy-Enabling; [ ] == Data may be obtained either statically or dynamically Table 2: Overview of Authentication Mechanisms The following summary attempts to present some key attributes of each of the mechanisms (using the "Short name" from Table 2), indicating attractive attributes with a "+" and undesirable attributes with a "-". 1. SPKI + Minimal leakage (note that the ADN is always leaked in the Server Name Indication (SNI) field in the ClientHello in TLS when communicating with a privacy-enabling DNS server) - Overhead of ongoing key management required Dickinson, et al. Standards Track PAGE 13 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 2. ADN + Minimal leakage + One-off direct configuration only 3. ADN only + Minimal one-off direct configuration; only a human-recognizable domain name needed - A/AAAA meta-queries leaked to network-provided DNS server that may be subject to active attack (attack can be mitigated by DNSSEC validation) 4. DHCP + No static config - Requires a non-standard or future DHCP option in order to provide the ADN - Requires secure and trustworthy connection to DHCP server if used with a Strict Privacy profile 5. DANE The ADN and/or IP may be obtained statically or dynamically, and the relevant attributes of that method apply. + DANE options (e.g., matching on entire certificate) - Requires a DNSSEC-validating stub implementation (the deployment of which is limited at the time of this writing) - DNSSEC chain meta-queries leaked to network-provided DNS server that may be subject to active attack 6. TLS extension The ADN and/or IP may be obtained statically or dynamically, and the relevant attributes of that method apply. + Reduced latency compared with DANE + No network-provided DNS server required if ADN and IP statically configured Dickinson, et al. Standards Track PAGE 14 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 + DANE options (e.g., matching on entire certificate) - Requires a DNSSEC-validating stub implementation 6.4. Combining Authentication Mechanisms This document does not make explicit recommendations about how an authentication mechanism based on SPKI pin sets should be combined with a domain-based mechanism from an operator perspective. However, it can be envisaged that a DNS server operator may wish to make both an SPKI pin set and an authentication domain name available to allow clients to choose which mechanism to use. Therefore, the following text provides guidance on how clients ought to behave if they choose to configure both, as is possible in HPKP [RFC 7469]. A DNS client that is configured with both an authentication domain name and an SPKI pin set for a DNS server SHOULD match on both a valid credential for the authentication domain name and a valid SPKI pin set (if both are available) when connecting to that DNS server. In this case, the client SHOULD treat individual SPKI pins as specified in Section 2.6 of [RFC 7469] with regard to user-defined trust anchors. The overall authentication result SHOULD only be considered successful if both authentication mechanisms are successful. 6.5. Authentication in Opportunistic Privacy An Opportunistic Privacy Profile (based on Opportunistic Security [RFC 7435]) that MAY be used for DNS over (D)TLS is described in [RFC 7858] and is further specified in this document. DNS clients that issue queries under an Opportunistic Privacy profile and that know authentication information for a given privacy-enabling DNS server SHOULD try to authenticate the server using the mechanisms described here. This is useful for detecting (but not preventing) active attacks, since the fact that authentication information is available indicates that the server in question is a privacy-enabling DNS server to which it should be possible to establish an authenticated and encrypted connection. In this case, whilst a client cannot know the reason for an authentication failure, from a security standpoint the client should consider an active attack in progress and proceed under that assumption. For example, a client that implements a nameserver selection algorithm that preferentially uses nameservers that successfully authenticated (see Section 5) might not continue to use the failing server if there were alternative servers available. Dickinson, et al. Standards Track PAGE 15 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 Attempting authentication is also useful for debugging or diagnostic purposes if there are means to report the result. This information can provide a basis for a DNS client to switch to (preferred) Strict Privacy where it is viable, e.g., where all the configured servers support DNS over (D)TLS and successfully authenticate. 6.6. Authentication in Strict Privacy To authenticate a privacy-enabling DNS server, a DNS client needs to know authentication information for each server it is willing to contact. This is necessary to protect against active attacks that attempt to redirect clients to rogue DNS servers. A DNS client requiring Strict Privacy MUST use either (1) one of the sources listed in Section 7, to obtain an authentication domain name for the server it contacts or (2) an SPKI pin set as described in [RFC 7858]. A DNS client requiring Strict Privacy MUST only attempt to connect to DNS servers for which at least one piece of authentication information is known. The client MUST use the available verification mechanisms described in Section 8 to authenticate the server and MUST abort connections to a server when no verification mechanism succeeds. With Strict Privacy, the DNS client MUST NOT commence sending DNS queries until at least one of the privacy-enabling DNS servers becomes available. A privacy-enabling DNS server may be temporarily unavailable when configuring a network. For example, for clients on networks that require registration through web-based login (a.k.a. "captive portals"), such registration may rely on DNS interception and spoofing. Techniques such as those used by dnssec-trigger [dnssec-trigger] MAY be used during network configuration, with the intent to transition to the designated privacy-enabling DNS servers after captive-portal registration. If using a Strict Privacy profile, the system MUST alert by some means that the DNS is not private during such a bootstrap operation. 6.7. Implementation Guidance Section 9 describes the (D)TLS profile for DNS over (D)TLS. Additional considerations relating to general implementation guidelines are discussed in both Section 11 and Appendix A. Dickinson, et al. Standards Track PAGE 16 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 7. Sources of Authentication Domain Names 7.1. Full Direct Configuration DNS clients may be directly and securely provisioned with the authentication domain name of each privacy-enabling DNS server -- for example, using a client-specific configuration file or API. In this case, direct configuration for a DNS client would consist of both an IP address and an authentication domain name for each DNS server that were obtained via an out-of-band mechanism. 7.2. Direct Configuration of ADN Only A DNS client may be configured directly and securely with only the authentication domain name of each of its privacy-enabling DNS servers -- for example, using a client-specific configuration file or API. A DNS client might learn of a default recursive DNS resolver from an untrusted source (such as DHCP's DNS Recursive Name Server option [RFC 3646]). It can then use meta-queries performed using an Opportunistic Privacy profile to an untrusted recursive DNS resolver to establish the IP address of the intended privacy-enabling DNS resolver by doing a lookup of A/AAAA records. A DNSSEC-validating client SHOULD apply the same validation policy to the A/AAAA meta-queries as it does to other queries. A client that does not validate DNSSEC SHOULD apply the same policy (if any) to the A/AAAA meta-queries as it does to other queries. Private DNS resolution can now be done by the DNS client against the pre-configured privacy- enabling DNS resolver, using the IP address obtained from the untrusted DNS resolver. A DNS client so configured that successfully connects to a privacy- enabling DNS server MAY choose to locally cache the server host IP addresses in order to not have to repeat the meta-query. 7.3. Dynamic Discovery of ADN This section discusses the general case of a DNS client discovering both the authentication domain name and IP address dynamically. At the time of this writing, this is not possible by any standard means. However, since, for example, a future DHCP extension could (in principle) provide this mechanism, the required security properties of such mechanisms are outlined here. Dickinson, et al. Standards Track PAGE 17 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 When using a Strict Privacy profile, the dynamic discovery technique used as a source of authentication domain names MUST be considered secure and trustworthy. This requirement does not apply when using an Opportunistic Privacy profile, given the security expectation of that profile. 7.3.1. DHCP In the typical case today, a DHCP server [RFC 2131] [RFC 3315] provides a list of IP addresses for DNS resolvers (see Section 3.8 of [RFC 2132]) but does not provide an authentication domain name for the DNS resolver, thus preventing the use of most of the authentication methods described here (all of those that are based on a mechanism with ADN; see Table 2). This document does not specify or request any DHCP extension to provide authentication domain names. However, if one is developed in future work, the issues outlined in Section 8 of [RFC 7227] should be taken into account, as should the security considerations discussed in Section 23 of [RFC 3315]. This document does not attempt to describe secured and trusted relationships to DHCP servers, as this is purely a DHCP issue (and still open, at the time of this writing). Whilst some implementation work is in progress to secure IPv6 connections for DHCP, IPv4 connections have received little or no implementation attention in this area. 8. Credential Verification Based on Authentication Domain Name 8.1. Authentication Based on PKIX Certificate When a DNS client configured with an authentication domain name connects to its configured DNS server over (D)TLS, the server may present it with a PKIX certificate. In order to ensure proper authentication, DNS clients MUST verify the entire certification path per [RFC 5280]. The DNS client additionally uses validation techniques as described in [RFC 6125] to compare the domain name to the certificate provided. A DNS client constructs one reference identifier for the server based on the authentication domain name: a DNS-ID, which is simply the authentication domain name itself. If the reference identifier is found (as described in Section 6 of [RFC 6125]) in the PKIX certificate's subjectAltName extension, the DNS client should accept the certificate for the server. Dickinson, et al. Standards Track PAGE 18 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 A compliant DNS client MUST only inspect the certificate's subjectAltName extension for the reference identifier. In particular, it MUST NOT inspect the Subject field itself. 8.2. DANE DANE [RFC 6698] provides various mechanisms using DNSSEC to anchor trust for certificates and raw public keys. However, this requires the DNS client to have an authentication domain name (which must be obtained via a trusted source) for the DNS privacy server. This section assumes a solid understanding of both DANE [RFC 6698] and DANE operations [RFC 7671]. A few pertinent issues covered in these documents are outlined here as useful pointers, but familiarity with both of these documents in their entirety is expected. Note that [RFC 6698] says Clients that validate the DNSSEC signatures themselves MUST use standard DNSSEC validation procedures. Clients that rely on another entity to perform the DNSSEC signature validation MUST use a secure mechanism between themselves and the validator. Note that [RFC 7671] covers the following topics: o Sections 4.1 ("Opportunistic Security and PKIX Usages") and 14 ("Security Considerations") of [RFC 7671], which both discuss the use of schemes based on trust anchors and end entities (PKIX-TA(0) and PKIX-EE(1), respectively) for Opportunistic Security. o Section 5 ("Certificate-Usage-Specific DANE Updates and Guidelines") of [RFC 7671] -- specifically, Section 5.1 of [RFC 7671], which outlines the combination of certificate usage DANE-EE(3) and selector SPKI(1) with raw public keys [RFC 7250]. Section 5.1 of [RFC 7671] also discusses the security implications of this mode; for example, it discusses key lifetimes and specifies that validity period enforcement is based solely on the TLSA RRset properties for this case. o Section 13 ("Operational Considerations") of [RFC 7671], which discusses TLSA TTLs and signature validity periods. The specific DANE record for a DNS privacy server would take the form _853._tcp.[authentication-domain-name] for TLS _853._udp.[authentication-domain-name] for DTLS Dickinson, et al. Standards Track PAGE 19 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 8.2.1. Direct DNS Meta-Queries The DNS client MAY choose to perform the DNS meta-queries to retrieve the required DANE records itself. The DNS meta-queries for such DANE records MAY use the Opportunistic Privacy profile or be in the clear to avoid trust recursion. The records MUST be validated using DNSSEC as described in [RFC 6698]. 8.2.2. TLS DNSSEC Chain Extension The DNS client MAY offer the TLS extension described in [TLS-DNSSEC-Chain-Ext]. If the DNS server supports this extension, it can provide the full chain to the client in the handshake. If the DNS client offers the TLS DNSSEC chain extension, it MUST be capable of validating the full DNSSEC authentication chain down to the leaf. If the supplied DNSSEC chain does not validate, the client MUST ignore the DNSSEC chain and validate only via other supplied credentials. 9. (D)TLS Protocol Profile This section defines the (D)TLS protocol profile of DNS over (D)TLS. Clients and servers MUST adhere to the (D)TLS implementation recommendations and security considerations of [RFC 7525], except with respect to the (D)TLS version. Since encryption of DNS using (D)TLS is a greenfield deployment, DNS clients and servers MUST implement only (D)TLS 1.2 or later. For example, implementing (D)TLS 1.3 [TLS-1.3] [DTLS-1.3] is also an option. Implementations MUST NOT offer or provide TLS compression, since compression can leak significant amounts of information, especially to a network observer capable of forcing the user to do an arbitrary DNS lookup in the style of the Compression Ratio Info-leak Made Easy (CRIME) attacks [CRIME]. Dickinson, et al. Standards Track PAGE 20 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 Implementations compliant with this profile MUST implement the following items: o TLS session resumption without server-side state [RFC 5077], which eliminates the need for the server to retain cryptographic state for longer than necessary. (This statement updates [RFC 7858].) o Raw public keys [RFC 7250], which reduce the size of the ServerHello and can be used by servers that cannot obtain certificates (e.g., DNS servers on private networks). A client MUST only indicate support for raw public keys if it has an SPKI pin set pre-configured (for interoperability reasons). Implementations compliant with this profile SHOULD implement the following items: o TLS False Start [RFC 7918], which reduces round trips by allowing the TLS second flight of messages (ChangeCipherSpec) to also contain the (encrypted) DNS query. o The Cached Information Extension [RFC 7924], which avoids transmitting the server's certificate and certificate chain if the client has cached that information from a previous TLS handshake. Guidance specific to TLS is provided in [RFC 7858], and guidance specific to DTLS is provided in [RFC 8094]. 10. IANA Considerations This document does not require any IANA actions. 11. Security Considerations Security considerations discussed in [RFC 7525], [RFC 8094], and [RFC 7858] apply to this document. DNS clients SHOULD implement (1) support for the mechanisms described in Section 8.2 and (2) offering a configuration option that limits authentication to using only those mechanisms (i.e., with no fallback to pure PKIX-based authentication) such that authenticating solely via the PKIX infrastructure can be avoided. Dickinson, et al. Standards Track PAGE 21 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 11.1. Countermeasures to DNS Traffic Analysis This section makes suggestions for measures that can reduce the ability of attackers to infer information pertaining to encrypted client queries by other means (e.g., via an analysis of encrypted traffic size or via monitoring of the unencrypted traffic from a DNS recursive resolver to an authoritative server). DNS-over-(D)TLS clients and servers SHOULD implement the following relevant DNS extensions: o Extension Mechanisms for DNS (EDNS(0)) padding [RFC 7830], which allows encrypted queries and responses to hide their size, making analysis of encrypted traffic harder. Guidance on padding policies for EDNS(0) is provided in [EDNS0-Pad-Policies]. DNS-over-(D)TLS clients SHOULD implement the following relevant DNS extensions: o Privacy election per [RFC 7871] ("Client Subnet in DNS Queries"). If a DNS client does not include an edns-client-subnet EDNS0 option with SOURCE PREFIX-LENGTH set to 0 in a query, the DNS server may potentially leak client address information to the upstream authoritative DNS servers. A DNS client ought to be able to inform the DNS resolver that it does not want any address information leaked, and the DNS resolver should honor that request. 12. References 12.1. Normative References [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC 2119, March 1997, <https://www.rfc-editor.org/info/RFC 2119>. [RFC 5077] Salowey, J., Zhou, H., Eronen, P., and H. Tschofenig, "Transport Layer Security (TLS) Session Resumption without Server-Side State", RFC 5077, DOI 10.17487/RFC 5077, January 2008, <https://www.rfc-editor.org/info/RFC 5077>. [RFC 5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC 5246, August 2008, <https://www.rfc-editor.org/info/RFC 5246>. Dickinson, et al. Standards Track PAGE 22 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 [RFC 5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC 5280, May 2008, <https://www.rfc-editor.org/info/RFC 5280>. [RFC 6125] Saint-Andre, P. and J. Hodges, "Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS)", RFC 6125, DOI 10.17487/RFC 6125, March 2011, <https://www.rfc-editor.org/info/RFC 6125>. [RFC 6347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer Security Version 1.2", RFC 6347, DOI 10.17487/RFC 6347, January 2012, <https://www.rfc-editor.org/info/RFC 6347>. [RFC 6698] Hoffman, P. and J. Schlyter, "The DNS-Based Authentication of Named Entities (DANE) Transport Layer Security (TLS) Protocol: TLSA", RFC 6698, DOI 10.17487/RFC 6698, August 2012, <https://www.rfc-editor.org/info/RFC 6698>. [RFC 7250] Wouters, P., Ed., Tschofenig, H., Ed., Gilmore, J., Weiler, S., and T. Kivinen, "Using Raw Public Keys in Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", RFC 7250, DOI 10.17487/RFC 7250, June 2014, <https://www.rfc-editor.org/info/RFC 7250>. [RFC 7525] Sheffer, Y., Holz, R., and P. Saint-Andre, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC 7525, May 2015, <https://www.rfc-editor.org/info/RFC 7525>. [RFC 7671] Dukhovni, V. and W. Hardaker, "The DNS-Based Authentication of Named Entities (DANE) Protocol: Updates and Operational Guidance", RFC 7671, DOI 10.17487/RFC 7671, October 2015, <https://www.rfc-editor.org/info/RFC 7671>. [RFC 7830] Mayrhofer, A., "The EDNS(0) Padding Option", RFC 7830, DOI 10.17487/RFC 7830, May 2016, <https://www.rfc-editor.org/info/RFC 7830>. [RFC 7858] Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D., and P. Hoffman, "Specification for DNS over Transport Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC 7858, May 2016, <https://www.rfc-editor.org/info/RFC 7858>. Dickinson, et al. Standards Track PAGE 23 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 [RFC 7918] Langley, A., Modadugu, N., and B. Moeller, "Transport Layer Security (TLS) False Start", RFC 7918, DOI 10.17487/RFC 7918, August 2016, <https://www.rfc-editor.org/info/RFC 7918>. [RFC 7924] Santesson, S. and H. Tschofenig, "Transport Layer Security (TLS) Cached Information Extension", RFC 7924, DOI 10.17487/RFC 7924, July 2016, <https://www.rfc-editor.org/info/RFC 7924>. [RFC 8094] Reddy, T., Wing, D., and P. Patil, "DNS over Datagram Transport Layer Security (DTLS)", RFC 8094, DOI 10.17487/RFC 8094, February 2017, <https://www.rfc-editor.org/info/RFC 8094>. [RFC 8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC 8174, May 2017, <https://www.rfc-editor.org/info/RFC 8174>. 12.2. Informative References [CRIME] Rizzo, J. and T. Duong, "The CRIME Attack", Ekoparty Security Conference, 2012, <https://www.ekoparty.org/archivo/2012/eko8-CRIME.pdf>. [dnssec-trigger] NLnetLabs, "Dnssec-Trigger", December 2017, <https://www.nlnetlabs.nl/projects/dnssec-trigger/>. [DTLS-1.3] Rescorla, E., Tschofenig, H., and N. Modadugu, "The Datagram Transport Layer Security (DTLS) Protocol Version 1.3", Work in Progress, draft-ietf-tls-dtls13-26, March 2018. [EDNS0-Pad-Policies] Mayrhofer, A., "Padding Policy for EDNS(0)", Work in Progress, draft-ietf-dprive-padding-policy-04, February 2018. [RFC 2131] Droms, R., "Dynamic Host Configuration Protocol", RFC 2131, DOI 10.17487/RFC 2131, March 1997, <https://www.rfc-editor.org/info/RFC 2131>. [RFC 2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor Extensions", RFC 2132, DOI 10.17487/RFC 2132, March 1997, <https://www.rfc-editor.org/info/RFC 2132>. Dickinson, et al. Standards Track PAGE 24 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 [RFC 3315] Droms, R., Ed., Bound, J., Volz, B., Lemon, T., Perkins, C., and M. Carney, "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", RFC 3315, DOI 10.17487/RFC 3315, July 2003, <https://www.rfc-editor.org/info/RFC 3315>. [RFC 3646] Droms, R., Ed., "DNS Configuration options for Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", RFC 3646, DOI 10.17487/RFC 3646, December 2003, <https://www.rfc-editor.org/info/RFC 3646>. [RFC 7227] Hankins, D., Mrugalski, T., Siodelski, M., Jiang, S., and S. Krishnan, "Guidelines for Creating New DHCPv6 Options", BCP 187, RFC 7227, DOI 10.17487/RFC 7227, May 2014, <https://www.rfc-editor.org/info/RFC 7227>. [RFC 7435] Dukhovni, V., "Opportunistic Security: Some Protection Most of the Time", RFC 7435, DOI 10.17487/RFC 7435, December 2014, <https://www.rfc-editor.org/info/RFC 7435>. [RFC 7469] Evans, C., Palmer, C., and R. Sleevi, "Public Key Pinning Extension for HTTP", RFC 7469, DOI 10.17487/RFC 7469, April 2015, <https://www.rfc-editor.org/info/RFC 7469>. [RFC 7626] Bortzmeyer, S., "DNS Privacy Considerations", RFC 7626, DOI 10.17487/RFC 7626, August 2015, <https://www.rfc-editor.org/info/RFC 7626>. [RFC 7871] Contavalli, C., van der Gaast, W., Lawrence, D., and W. Kumari, "Client Subnet in DNS Queries", RFC 7871, DOI 10.17487/RFC 7871, May 2016, <https://www.rfc-editor.org/info/RFC 7871>. [TLS-1.3] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", Work in Progress, draft-ietf-tls-tls13-27, March 2018. [TLS-DNSSEC-Chain-Ext] Shore, M., Barnes, R., Huque, S., and W. Toorop, "A DANE Record and DNSSEC Authentication Chain Extension for TLS", Work in Progress, draft-ietf-tls-dnssec-chain- extension-06, January 2018. Dickinson, et al. Standards Track PAGE 25 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 Appendix A. Server Capability Probing and Caching by DNS Clients This section presents a non-normative discussion of how DNS clients might probe for, and cache capabilities of, privacy-enabling DNS servers. Deployment of both DNS over TLS and DNS over DTLS will be gradual. Not all servers will support one or both of these protocols, and the well-known port might be blocked by some middleboxes. Clients will be expected to keep track of servers that support DNS over TLS and/or DNS over DTLS, as well as those that have been previously authenticated. If no server capability information is available, then (unless otherwise specified by the configuration of the DNS client) DNS clients that implement both TLS and DTLS should try to authenticate using both protocols before failing or falling back to an unauthenticated or cleartext connection. DNS clients using an Opportunistic Privacy profile should try all available servers (possibly in parallel) in order to obtain an authenticated and encrypted connection before falling back. (RATIONALE: This approach can increase latency while discovering server capabilities but maximizes the chance of sending the query over an authenticated and encrypted connection.) Dickinson, et al. Standards Track PAGE 26 top

RFC 8310 Usage Profiles for DNS over (D)TLS March 2018 Acknowledgments Thanks to the authors of both [RFC 8094] and [RFC 7858] for laying the groundwork for this document and for reviewing the contents. The authors would also like to thank John Dickinson, Shumon Huque, Melinda Shore, Gowri Visweswaran, Ray Bellis, Stephane Bortzmeyer, Jinmei Tatuya, Paul Hoffman, Christian Huitema, and John Levine for review and discussion of the ideas presented here. Authors' Addresses Sara Dickinson Sinodun Internet Technologies Magdalen Centre Oxford Science Park Oxford OX4 4GA United Kingdom Email: sara@sinodun.com URI: https://www.sinodun.com/ Daniel Kahn Gillmor ACLU 125 Broad Street, 18th Floor New York, NY 10004 United States of America Email: dkg@fifthhorseman.net Tirumaleswar Reddy McAfee, Inc. Embassy Golf Link Business Park Bangalore, Karnataka 560071 India Email: TirumaleswarReddy_Konda@McAfee.com Dickinson, et al. Standards Track PAGE 27 top

Usage Profiles for DNS over TLS and DNS over DTLS RFC TOTAL SIZE: 58893 bytes PUBLICATION DATE: Wednesday, March 21st, 2018 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 8310: The IETF Trust, Wednesday, March 21st, 2018
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement