|
|
|
|
|
|
IETF RFC 7530
Last modified on Thursday, March 26th, 2015
 Permanent link to RFC 7530
 Search GitHub Wiki for RFC 7530
 Show other RFCs mentioning RFC 7530
Internet Engineering Task Force (IETF) T. Haynes, Ed.
Request for Comments: 7530 Primary Data
Obsoletes: 3530 D. Noveck, Ed.
Category: Standards Track Dell
ISSN: 2070-1721 March 2015
Network File System (NFS) Version 4 Protocol
 Abstract
The Network File System (NFS) version 4 protocol is a distributed
file system protocol that builds on the heritage of NFS protocol
version 2 (RFC 1094) and version 3 (RFC 1813). Unlike earlier
versions, the NFS version 4 protocol supports traditional file access
while integrating support for file locking and the MOUNT protocol.
In addition, support for strong security (and its negotiation),
COMPOUND operations, client caching, and internationalization has
been added. Of course, attention has been applied to making NFS
version 4 operate well in an Internet environment.
This document, together with the companion External Data
Representation (XDR) description document, RFC 7531, obsoletes RFC
3530 as the definition of the NFS version 4 protocol.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/RFC 7530.
Haynes & Noveck Standards Track PAGE 1 
RFC 7530 NFSv4 March 2015
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Table of Contents
1. Introduction ....................................................8
1.1. Requirements Language ......................................8
1.2. NFS Version 4 Goals ........................................8
1.3. Definitions in the Companion Document RFC 7531 Are
Authoritative ..............................................9
1.4. Overview of NFSv4 Features .................................9
1.4.1. RPC and Security ....................................9
1.4.2. Procedure and Operation Structure ..................10
1.4.3. File System Model ..................................10
1.4.4. OPEN and CLOSE .....................................12
1.4.5. File Locking .......................................12
1.4.6. Client Caching and Delegation ......................13
1.5. General Definitions .......................................14
1.6. Changes since RFC 3530 ....................................16
1.7. Changes between RFC 3010 and RFC 3530 .....................16
2. Protocol Data Types ............................................18
2.1. Basic Data Types ..........................................18
2.2. Structured Data Types .....................................21
Haynes & Noveck Standards Track PAGE 2
RFC 7530 NFSv4 March 2015
3. RPC and Security Flavor ........................................25
3.1. Ports and Transports ......................................25
3.1.1. Client Retransmission Behavior .....................26
3.2. Security Flavors ..........................................27
3.2.1. Security Mechanisms for NFSv4 ......................27
3.3. Security Negotiation ......................................28
3.3.1. SECINFO ............................................29
3.3.2. Security Error .....................................29
3.3.3. Callback RPC Authentication ........................29
4. Filehandles ....................................................30
4.1. Obtaining the First Filehandle ............................30
4.1.1. Root Filehandle ....................................31
4.1.2. Public Filehandle ..................................31
4.2. Filehandle Types ..........................................31
4.2.1. General Properties of a Filehandle .................32
4.2.2. Persistent Filehandle ..............................32
4.2.3. Volatile Filehandle ................................33
4.2.4. One Method of Constructing a Volatile Filehandle ...34
4.3. Client Recovery from Filehandle Expiration ................35
5. Attributes .....................................................35
5.1. REQUIRED Attributes .......................................37
5.2. RECOMMENDED Attributes ....................................37
5.3. Named Attributes ..........................................37
5.4. Classification of Attributes ..............................39
5.5. Set-Only and Get-Only Attributes ..........................40
5.6. REQUIRED Attributes - List and Definition References ......40
5.7. RECOMMENDED Attributes - List and Definition References ...41
5.8. Attribute Definitions .....................................42
5.8.1. Definitions of REQUIRED Attributes .................42
5.8.2. Definitions of Uncategorized RECOMMENDED
Attributes .........................................45
5.9. Interpreting owner and owner_group ........................51
5.10. Character Case Attributes ................................53
6. Access Control Attributes ......................................54
6.1. Goals .....................................................54
6.2. File Attributes Discussion ................................55
6.2.1. Attribute 12: acl ..................................55
6.2.2. Attribute 33: mode .................................70
6.3. Common Methods ............................................71
6.3.1. Interpreting an ACL ................................71
6.3.2. Computing a mode Attribute from an ACL .............72
6.4. Requirements ..............................................73
6.4.1. Setting the mode and/or ACL Attributes .............74
6.4.2. Retrieving the mode and/or ACL Attributes ..........75
6.4.3. Creating New Objects ...............................75
Haynes & Noveck Standards Track PAGE 3
RFC 7530 NFSv4 March 2015
7. NFS Server Namespace ...........................................77
7.1. Server Exports ............................................77
7.2. Browsing Exports ..........................................77
7.3. Server Pseudo-File System .................................78
7.4. Multiple Roots ............................................79
7.5. Filehandle Volatility .....................................79
7.6. Exported Root .............................................79
7.7. Mount Point Crossing ......................................79
7.8. Security Policy and Namespace Presentation ................80
8. Multi-Server Namespace .........................................81
8.1. Location Attributes .......................................81
8.2. File System Presence or Absence ...........................81
8.3. Getting Attributes for an Absent File System ..............83
8.3.1. GETATTR within an Absent File System ...............83
8.3.2. READDIR and Absent File Systems ....................84
8.4. Uses of Location Information ..............................84
8.4.1. File System Replication ............................85
8.4.2. File System Migration ..............................86
8.4.3. Referrals ..........................................86
8.5. Location Entries and Server Identity ......................87
8.6. Additional Client-Side Considerations .....................88
8.7. Effecting File System Referrals ...........................89
8.7.1. Referral Example (LOOKUP) ..........................89
8.7.2. Referral Example (READDIR) .........................93
8.8. The Attribute fs_locations ................................96
9. File Locking and Share Reservations ............................98
9.1. Opens and Byte-Range Locks ................................99
9.1.1. Client ID ..........................................99
9.1.2. Server Release of Client ID .......................102
9.1.3. Use of Seqids .....................................103
9.1.4. Stateid Definition ................................104
9.1.5. Lock-Owner ........................................110
9.1.6. Use of the Stateid and Locking ....................110
9.1.7. Sequencing of Lock Requests .......................113
9.1.8. Recovery from Replayed Requests ...................114
9.1.9. Interactions of Multiple Sequence Values ..........114
9.1.10. Releasing State-Owner State ......................115
9.1.11. Use of Open Confirmation .........................116
9.2. Lock Ranges ..............................................117
9.3. Upgrading and Downgrading Locks ..........................117
9.4. Blocking Locks ...........................................118
9.5. Lease Renewal ............................................119
9.6. Crash Recovery ...........................................120
9.6.1. Client Failure and Recovery .......................120
9.6.2. Server Failure and Recovery .......................120
9.6.3. Network Partitions and Recovery ...................122
9.7. Recovery from a Lock Request Timeout or Abort ............130
9.8. Server Revocation of Locks ...............................130
Haynes & Noveck Standards Track PAGE 4
RFC 7530 NFSv4 March 2015
9.9. Share Reservations .......................................132
9.10. OPEN/CLOSE Operations ...................................132
9.10.1. Close and Retention of State Information .........133
9.11. Open Upgrade and Downgrade ..............................134
9.12. Short and Long Leases ...................................135
9.13. Clocks, Propagation Delay, and Calculating Lease
Expiration ..............................................135
9.14. Migration, Replication, and State .......................136
9.14.1. Migration and State ..............................136
9.14.2. Replication and State ............................137
9.14.3. Notification of Migrated Lease ...................137
9.14.4. Migration and the lease_time Attribute ...........138
10. Client-Side Caching ..........................................139
10.1. Performance Challenges for Client-Side Caching ..........139
10.2. Delegation and Callbacks ................................140
10.2.1. Delegation Recovery ..............................142
10.3. Data Caching ............................................147
10.3.1. Data Caching and OPENs ...........................147
10.3.2. Data Caching and File Locking ....................148
10.3.3. Data Caching and Mandatory File Locking ..........150
10.3.4. Data Caching and File Identity ...................150
10.4. Open Delegation .........................................151
10.4.1. Open Delegation and Data Caching .................154
10.4.2. Open Delegation and File Locks ...................155
10.4.3. Handling of CB_GETATTR ...........................155
10.4.4. Recall of Open Delegation ........................158
10.4.5. OPEN Delegation Race with CB_RECALL ..............160
10.4.6. Clients That Fail to Honor Delegation Recalls ....161
10.4.7. Delegation Revocation ............................162
10.5. Data Caching and Revocation .............................162
10.5.1. Revocation Recovery for Write Open Delegation ....163
10.6. Attribute Caching .......................................164
10.7. Data and Metadata Caching and Memory-Mapped Files .......166
10.8. Name Caching ............................................168
10.9. Directory Caching .......................................169
11. Minor Versioning .............................................170
12. Internationalization .........................................170
12.1. Introduction ............................................170
12.2. Limitations on Internationalization-Related
Processing in the NFSv4 Context .........................172
12.3. Summary of Server Behavior Types ........................173
12.4. String Encoding .........................................173
12.5. Normalization ...........................................174
12.6. Types with Processing Defined by Other Internet Areas ...175
12.7. Errors Related to UTF-8 .................................177
12.8. Servers That Accept File Component Names That
Are Not Valid UTF-8 Strings .............................177
Haynes & Noveck Standards Track PAGE 5
RFC 7530 NFSv4 March 2015
13. Error Values .................................................178
13.1. Error Definitions .......................................179
13.1.1. General Errors ...................................180
13.1.2. Filehandle Errors ................................181
13.1.3. Compound Structure Errors ........................183
13.1.4. File System Errors ...............................184
13.1.5. State Management Errors ..........................186
13.1.6. Security Errors ..................................187
13.1.7. Name Errors ......................................187
13.1.8. Locking Errors ...................................188
13.1.9. Reclaim Errors ...................................190
13.1.10. Client Management Errors ........................191
13.1.11. Attribute Handling Errors .......................191
13.1.12. Miscellaneous Errors ............................191
13.2. Operations and Their Valid Errors .......................192
13.3. Callback Operations and Their Valid Errors ..............200
13.4. Errors and the Operations That Use Them .................201
14. NFSv4 Requests ...............................................206
14.1. COMPOUND Procedure ......................................207
14.2. Evaluation of a COMPOUND Request ........................207
14.3. Synchronous Modifying Operations ........................208
14.4. Operation Values ........................................208
15. NFSv4 Procedures .............................................209
15.1. Procedure 0: NULL - No Operation ........................209
15.2. Procedure 1: COMPOUND - COMPOUND Operations .............210
16. NFSv4 Operations .............................................214
16.1. Operation 3: ACCESS - Check Access Rights ...............214
16.2. Operation 4: CLOSE - Close File .........................217
16.3. Operation 5: COMMIT - Commit Cached Data ................218
16.4. Operation 6: CREATE - Create a Non-regular File Object ..221
16.5. Operation 7: DELEGPURGE - Purge Delegations
Awaiting Recovery .......................................224
16.6. Operation 8: DELEGRETURN - Return Delegation ............226
16.7. Operation 9: GETATTR - Get Attributes ...................227
16.8. Operation 10: GETFH - Get Current Filehandle ............229
16.9. Operation 11: LINK - Create Link to a File ..............230
16.10. Operation 12: LOCK - Create Lock .......................232
16.11. Operation 13: LOCKT - Test for Lock ....................236
16.12. Operation 14: LOCKU - Unlock File ......................238
16.13. Operation 15: LOOKUP - Look Up Filename ................240
16.14. Operation 16: LOOKUPP - Look Up Parent Directory .......242
16.15. Operation 17: NVERIFY - Verify Difference in
Attributes .............................................243
16.16. Operation 18: OPEN - Open a Regular File ...............245
Haynes & Noveck Standards Track PAGE 6
RFC 7530 NFSv4 March 2015
16.17. Operation 19: OPENATTR - Open Named Attribute
Directory ..............................................256
16.18. Operation 20: OPEN_CONFIRM - Confirm Open ..............257
16.19. Operation 21: OPEN_DOWNGRADE - Reduce Open File
Access .................................................260
16.20. Operation 22: PUTFH - Set Current Filehandle ...........262
16.21. Operation 23: PUTPUBFH - Set Public Filehandle .........263
16.22. Operation 24: PUTROOTFH - Set Root Filehandle ..........265
16.23. Operation 25: READ - Read from File ....................266
16.24. Operation 26: READDIR - Read Directory .................269
16.25. Operation 27: READLINK - Read Symbolic Link ............273
16.26. Operation 28: REMOVE - Remove File System Object .......274
16.27. Operation 29: RENAME - Rename Directory Entry ..........276
16.28. Operation 30: RENEW - Renew a Lease ....................278
16.29. Operation 31: RESTOREFH - Restore Saved Filehandle .....280
16.30. Operation 32: SAVEFH - Save Current Filehandle .........281
16.31. Operation 33: SECINFO - Obtain Available Security ......282
16.32. Operation 34: SETATTR - Set Attributes .................286
16.33. Operation 35: SETCLIENTID - Negotiate Client ID ........289
16.34. Operation 36: SETCLIENTID_CONFIRM - Confirm Client ID ..293
16.35. Operation 37: VERIFY - Verify Same Attributes ..........297
16.36. Operation 38: WRITE - Write to File ....................299
16.37. Operation 39: RELEASE_LOCKOWNER - Release
Lock-Owner State .......................................304
16.38. Operation 10044: ILLEGAL - Illegal Operation ...........305
17. NFSv4 Callback Procedures ....................................306
17.1. Procedure 0: CB_NULL - No Operation .....................306
17.2. Procedure 1: CB_COMPOUND - COMPOUND Operations ..........307
18. NFSv4 Callback Operations ....................................309
18.1. Operation 3: CB_GETATTR - Get Attributes ................309
18.2. Operation 4: CB_RECALL - Recall an Open Delegation ......310
18.3. Operation 10044: CB_ILLEGAL - Illegal Callback
Operation ...............................................311
19. Security Considerations ......................................312
20. IANA Considerations ..........................................314
20.1. Named Attribute Definitions .............................314
20.1.1. Initial Registry .................................315
20.1.2. Updating Registrations ...........................315
20.2. Updates to Existing IANA Registries .....................315
21. References ...................................................316
21.1. Normative References ....................................316
21.2. Informative References ..................................318
Acknowledgments ..................................................322
Authors' Addresses ...............................................323
Haynes & Noveck Standards Track PAGE 7
RFC 7530 NFSv4 March 2015
1. Introduction
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC 2119],
except where "REQUIRED" and "RECOMMENDED" are used as qualifiers to
distinguish classes of attributes as described in Sections 1.4.3.2
and 5 of this document.
1.2. NFS Version 4 Goals
The Network File System version 4 (NFSv4) protocol is a further
revision of the NFS protocol defined already by versions 2 [RFC 1094]
and 3 [RFC 1813]. It retains the essential characteristics of
previous versions: design for easy recovery; independent of transport
protocols, operating systems, and file systems; simplicity; and good
performance. The NFSv4 revision has the following goals:
o Improved access and good performance on the Internet.
The protocol is designed to transit firewalls easily, perform well
where latency is high and bandwidth is low, and scale to very
large numbers of clients per server.
o Strong security with negotiation built into the protocol.
The protocol builds on the work of the Open Network Computing
(ONC) Remote Procedure Call (RPC) working group in supporting the
RPCSEC_GSS protocol (see both [RFC 2203] and [RFC 5403]).
Additionally, the NFSv4 protocol provides a mechanism to allow
clients and servers the ability to negotiate security and require
clients and servers to support a minimal set of security schemes.
o Good cross-platform interoperability.
The protocol features a file system model that provides a useful,
common set of features that does not unduly favor one file system
or operating system over another.
o Designed for protocol extensions.
The protocol is designed to accept standard extensions that do not
compromise backward compatibility.
Haynes & Noveck Standards Track PAGE 8
RFC 7530 NFSv4 March 2015
This document, together with the companion External Data
Representation (XDR) description document [RFC 7531], obsoletes
[RFC 3530] as the authoritative document describing NFSv4. It does
not introduce any over-the-wire protocol changes, in the sense that
previously valid requests remain valid.
1.3. Definitions in the Companion Document RFC 7531 Are Authoritative
The "Network File System (NFS) Version 4 External Data Representation
Standard (XDR) Description" [RFC 7531] contains the definitions in XDR
description language of the constructs used by the protocol. Inside
this document, several of the constructs are reproduced for purposes
of explanation. The reader is warned of the possibility of errors in
the reproduced constructs outside of [RFC 7531]. For any part of the
document that is inconsistent with [RFC 7531], [RFC 7531] is to be
considered authoritative.
1.4. Overview of NFSv4 Features
To provide a reasonable context for the reader, the major features of
the NFSv4 protocol will be reviewed in brief. This is done to
provide an appropriate context for both the reader who is familiar
with the previous versions of the NFS protocol and the reader who is
new to the NFS protocols. For the reader new to the NFS protocols,
some fundamental knowledge is still expected. The reader should be
familiar with the XDR and RPC protocols as described in [RFC 4506] and
[RFC 5531]. A basic knowledge of file systems and distributed file
systems is expected as well.
1.4.1. RPC and Security
As with previous versions of NFS, the XDR and RPC mechanisms used for
the NFSv4 protocol are those defined in [RFC 4506] and [RFC 5531]. To
meet end-to-end security requirements, the RPCSEC_GSS framework (both
version 1 in [RFC 2203] and version 2 in [RFC 5403]) will be used to
extend the basic RPC security. With the use of RPCSEC_GSS, various
mechanisms can be provided to offer authentication, integrity, and
privacy to the NFSv4 protocol. Kerberos V5 will be used as described
in [RFC 4121] to provide one security framework. With the use of
RPCSEC_GSS, other mechanisms may also be specified and used for NFSv4
security.
To enable in-band security negotiation, the NFSv4 protocol has added
a new operation that provides the client with a method of querying
the server about its policies regarding which security mechanisms
must be used for access to the server's file system resources. With
this, the client can securely match the security mechanism that meets
the policies specified at both the client and server.
Haynes & Noveck Standards Track PAGE 9
RFC 7530 NFSv4 March 2015
1.4.2. Procedure and Operation Structure
A significant departure from the previous versions of the NFS
protocol is the introduction of the COMPOUND procedure. For the
NFSv4 protocol, there are two RPC procedures: NULL and COMPOUND. The
COMPOUND procedure is defined in terms of operations, and these
operations correspond more closely to the traditional NFS procedures.
With the use of the COMPOUND procedure, the client is able to build
simple or complex requests. These COMPOUND requests allow for a
reduction in the number of RPCs needed for logical file system
operations. For example, without previous contact with a server a
client will be able to read data from a file in one request by
combining LOOKUP, OPEN, and READ operations in a single COMPOUND RPC.
With previous versions of the NFS protocol, this type of single
request was not possible.
The model used for COMPOUND is very simple. There is no logical OR
or ANDing of operations. The operations combined within a COMPOUND
request are evaluated in order by the server. Once an operation
returns a failing result, the evaluation ends and the results of all
evaluated operations are returned to the client.
The NFSv4 protocol continues to have the client refer to a file or
directory at the server by a "filehandle". The COMPOUND procedure
has a method of passing a filehandle from one operation to another
within the sequence of operations. There is a concept of a current
filehandle and a saved filehandle. Most operations use the current
filehandle as the file system object to operate upon. The saved
filehandle is used as temporary filehandle storage within a COMPOUND
procedure as well as an additional operand for certain operations.
1.4.3. File System Model
The general file system model used for the NFSv4 protocol is the same
as previous versions. The server file system is hierarchical, with
the regular files contained within being treated as opaque byte
streams. In a slight departure, file and directory names are encoded
with UTF-8 to deal with the basics of internationalization.
The NFSv4 protocol does not require a separate protocol to provide
for the initial mapping between pathname and filehandle. Instead of
using the older MOUNT protocol for this mapping, the server provides
a root filehandle that represents the logical root or top of the file
system tree provided by the server. The server provides multiple
file systems by gluing them together with pseudo-file systems. These
pseudo-file systems provide for potential gaps in the pathnames
between real file systems.
Haynes & Noveck Standards Track PAGE 10
RFC 7530 NFSv4 March 2015
1.4.3.1. Filehandle Types
In previous versions of the NFS protocol, the filehandle provided by
the server was guaranteed to be valid or persistent for the lifetime
of the file system object to which it referred. For some server
implementations, this persistence requirement has been difficult to
meet. For the NFSv4 protocol, this requirement has been relaxed by
introducing another type of filehandle -- volatile. With persistent
and volatile filehandle types, the server implementation can match
the abilities of the file system at the server along with the
operating environment. The client will have knowledge of the type of
filehandle being provided by the server and can be prepared to deal
with the semantics of each.
1.4.3.2. Attribute Types
The NFSv4 protocol has a rich and extensible file object attribute
structure, which is divided into REQUIRED, RECOMMENDED, and named
attributes (see Section 5).
Several (but not all) of the REQUIRED attributes are derived from the
attributes of NFSv3 (see the definition of the fattr3 data type in
[RFC 1813]). An example of a REQUIRED attribute is the file object's
type (Section 5.8.1.2) so that regular files can be distinguished
from directories (also known as folders in some operating
environments) and other types of objects. REQUIRED attributes are
discussed in Section 5.1.
An example of the RECOMMENDED attributes is an acl (Section 6.2.1).
This attribute defines an Access Control List (ACL) on a file object.
An ACL provides file access control beyond the model used in NFSv3.
The ACL definition allows for specification of specific sets of
permissions for individual users and groups. In addition, ACL
inheritance allows propagation of access permissions and restriction
down a directory tree as file system objects are created.
RECOMMENDED attributes are discussed in Section 5.2.
A named attribute is an opaque byte stream that is associated with a
directory or file and referred to by a string name. Named attributes
are meant to be used by client applications as a method to associate
application-specific data with a regular file or directory. NFSv4.1
modifies named attributes relative to NFSv4.0 by tightening the
allowed operations in order to prevent the development of
non-interoperable implementations. Named attributes are discussed in
Section 5.3.
Haynes & Noveck Standards Track PAGE 11
RFC 7530 NFSv4 March 2015
1.4.3.3. Multi-Server Namespace
A single-server namespace is the file system hierarchy that the
server presents for remote access. It is a proper subset of all the
file systems available locally. NFSv4 contains a number of features
to allow implementation of namespaces that cross server boundaries
and that allow and facilitate a non-disruptive transfer of support
for individual file systems between servers. They are all based upon
attributes that allow one file system to specify alternative or new
locations for that file system. That is, just as a client might
traverse across local file systems on a single server, it can now
traverse to a remote file system on a different server.
These attributes may be used together with the concept of absent file
systems, which provide specifications for additional locations but no
actual file system content. This allows a number of important
facilities:
o Location attributes may be used with absent file systems to
implement referrals whereby one server may direct the client to a
file system provided by another server. This allows extensive
multi-server namespaces to be constructed.
o Location attributes may be provided for present file systems to
provide the locations of alternative file system instances or
replicas to be used in the event that the current file system
instance becomes unavailable.
o Location attributes may be provided when a previously present file
system becomes absent. This allows non-disruptive migration of
file systems to alternative servers.
1.4.4. OPEN and CLOSE
The NFSv4 protocol introduces OPEN and CLOSE operations. The OPEN
operation provides a single point where file lookup, creation, and
share semantics (see Section 9.9) can be combined. The CLOSE
operation also provides for the release of state accumulated by OPEN.
1.4.5. File Locking
With the NFSv4 protocol, the support for byte-range file locking is
part of the NFS protocol. The file locking support is structured so
that an RPC callback mechanism is not required. This is a departure
from the previous versions of the NFS file locking protocol, Network
Lock Manager (NLM) [RFC 1813]. The state associated with file locks
is maintained at the server under a lease-based model. The server
defines a single lease period for all state held by an NFS client.
Haynes & Noveck Standards Track PAGE 12
RFC 7530 NFSv4 March 2015
If the client does not renew its lease within the defined period, all
state associated with the client's lease may be released by the
server. The client may renew its lease by use of the RENEW operation
or implicitly by use of other operations (primarily READ).
1.4.6. Client Caching and Delegation
The file, attribute, and directory caching for the NFSv4 protocol is
similar to previous versions. Attributes and directory information
are cached for a duration determined by the client. At the end of a
predefined timeout, the client will query the server to see if the
related file system object has been updated.
For file data, the client checks its cache validity when the file is
opened. A query is sent to the server to determine if the file has
been changed. Based on this information, the client determines if
the data cache for the file should be kept or released. Also, when
the file is closed, any modified data is written to the server.
If an application wants to serialize access to file data, file
locking of the file data ranges in question should be used.
The major addition to NFSv4 in the area of caching is the ability of
the server to delegate certain responsibilities to the client. When
the server grants a delegation for a file to a client, the client is
guaranteed certain semantics with respect to the sharing of that file
with other clients. At OPEN, the server may provide the client
either a read (OPEN_DELEGATE_READ) or a write (OPEN_DELEGATE_WRITE)
delegation for the file (see Section 10.4). If the client is granted
an OPEN_DELEGATE_READ delegation, it is assured that no other client
has the ability to write to the file for the duration of the
delegation. If the client is granted an OPEN_DELEGATE_WRITE
delegation, the client is assured that no other client has read or
write access to the file.
Delegations can be recalled by the server. If another client
requests access to the file in such a way that the access conflicts
with the granted delegation, the server is able to notify the initial
client and recall the delegation. This requires that a callback path
exist between the server and client. If this callback path does not
exist, then delegations cannot be granted. The essence of a
delegation is that it allows the client to locally service operations
such as OPEN, CLOSE, LOCK, LOCKU, READ, or WRITE without immediate
interaction with the server.
Haynes & Noveck Standards Track PAGE 13
RFC 7530 NFSv4 March 2015
1.5. General Definitions
The following definitions are provided for the purpose of providing
an appropriate context for the reader.
Absent File System: A file system is "absent" when a namespace
component does not have a backing file system.
Anonymous Stateid: The Anonymous Stateid is a special locking object
and is defined in Section 9.1.4.3.
Byte: In this document, a byte is an octet, i.e., a datum exactly
8 bits in length.
Client: The client is the entity that accesses the NFS server's
resources. The client may be an application that contains the
logic to access the NFS server directly. The client may also be
the traditional operating system client that provides remote file
system services for a set of applications.
With reference to byte-range locking, the client is also the
entity that maintains a set of locks on behalf of one or more
applications. This client is responsible for crash or failure
recovery for those locks it manages.
Note that multiple clients may share the same transport and
connection, and multiple clients may exist on the same network
node.
Client ID: The client ID is a 64-bit quantity used as a unique,
shorthand reference to a client-supplied verifier and ID. The
server is responsible for supplying the client ID.
File System: The file system is the collection of objects on a
server that share the same fsid attribute (see Section 5.8.1.9).
Lease: A lease is an interval of time defined by the server for
which the client is irrevocably granted a lock. At the end of a
lease period the lock may be revoked if the lease has not been
extended. The lock must be revoked if a conflicting lock has been
granted after the lease interval.
All leases granted by a server have the same fixed duration. Note
that the fixed interval duration was chosen to alleviate the
expense a server would have in maintaining state about variable-
length leases across server failures.
Haynes & Noveck Standards Track PAGE 14
RFC 7530 NFSv4 March 2015
Lock: The term "lock" is used to refer to record (byte-range) locks
as well as share reservations unless specifically stated
otherwise.
Lock-Owner: Each byte-range lock is associated with a specific
lock-owner and an open-owner. The lock-owner consists of a
client ID and an opaque owner string. The client presents this to
the server to establish the ownership of the byte-range lock as
needed.
Open-Owner: Each open file is associated with a specific open-owner,
which consists of a client ID and an opaque owner string. The
client presents this to the server to establish the ownership of
the open as needed.
READ Bypass Stateid: The READ Bypass Stateid is a special locking
object and is defined in Section 9.1.4.3.
Server: The "server" is the entity responsible for coordinating
client access to a set of file systems.
Stable Storage: NFSv4 servers must be able to recover without data
loss from multiple power failures (including cascading power
failures, that is, several power failures in quick succession),
operating system failures, and hardware failure of components
other than the storage medium itself (for example, disk,
non-volatile RAM).
Some examples of stable storage that are allowable for an NFS
server include:
(1) Media commit of data. That is, the modified data has been
successfully written to the disk media -- for example, the
disk platter.
(2) An immediate reply disk drive with battery-backed on-drive
intermediate storage or uninterruptible power system (UPS).
(3) Server commit of data with battery-backed intermediate
storage and recovery software.
(4) Cache commit with UPS and recovery software.
Haynes & Noveck Standards Track PAGE 15
RFC 7530 NFSv4 March 2015
Stateid: A stateid is a 128-bit quantity returned by a server that
uniquely identifies the open and locking states provided by the
server for a specific open-owner or lock-owner/open-owner pair for
a specific file and type of lock.
Verifier: A verifier is a 64-bit quantity generated by the client
that the server can use to determine if the client has restarted
and lost all previous lock state.
1.6. Changes since RFC 3530
The main changes from RFC 3530 [RFC 3530] are:
o The XDR definition has been moved to a companion document
[RFC 7531].
o The IETF intellectual property statements were updated to the
latest version.
o There is a restructured and more complete explanation of multi-
server namespace features.
o The handling of domain names was updated to reflect
Internationalized Domain Names in Applications (IDNA) [RFC 5891].
o The previously required LIPKEY and SPKM-3 security mechanisms have
been removed.
o Some clarification was provided regarding a client re-establishing
callback information to the new server if state has been migrated.
o A third edge case was added for courtesy locks and network
partitions.
o The definition of stateid was strengthened.
1.7. Changes between RFC 3010 and RFC 3530
The definition of the NFSv4 protocol in [RFC 3530] replaced and
obsoleted the definition present in [RFC 3010]. While portions of the
two documents remained the same, there were substantive changes in
others. The changes made between [RFC 3010] and [RFC 3530] reflect
implementation experience and further review of the protocol.
Haynes & Noveck Standards Track PAGE 16
RFC 7530 NFSv4 March 2015
The following list is not inclusive of all changes but presents some
of the most notable changes or additions made:
o The state model has added an open_owner4 identifier. This was
done to accommodate POSIX-based clients and the model they use for
file locking. For POSIX clients, an open_owner4 would correspond
to a file descriptor potentially shared amongst a set of processes
and the lock_owner4 identifier would correspond to a process that
is locking a file.
o Added clarifications and error conditions for the handling of the
owner and group attributes. Since these attributes are string
based (as opposed to the numeric uid/gid of previous versions of
NFS), translations may not be available and hence the changes
made.
o Added clarifications for the ACL and mode attributes to address
evaluation and partial support.
o For identifiers that are defined as XDR opaque, set limits on
their size.
o Added the mounted_on_fileid attribute to allow POSIX clients to
correctly construct local mounts.
o Modified the SETCLIENTID/SETCLIENTID_CONFIRM operations to deal
correctly with confirmation details along with adding the ability
to specify new client callback information. Also added
clarification of the callback information itself.
o Added a new operation RELEASE_LOCKOWNER to enable notifying the
server that a lock_owner4 will no longer be used by the client.
o Added RENEW operation changes to identify the client correctly and
allow for additional error returns.
o Verified error return possibilities for all operations.
o Removed use of the pathname4 data type from LOOKUP and OPEN in
favor of having the client construct a sequence of LOOKUP
operations to achieve the same effect.
Haynes & Noveck Standards Track PAGE 17
RFC 7530 NFSv4 March 2015
2. Protocol Data Types
The syntax and semantics to describe the data types of the NFSv4
protocol are defined in the XDR [RFC 4506] and RPC [RFC 5531]
documents. The next sections build upon the XDR data types to define
types and structures specific to this protocol. As a reminder, the
size constants and authoritative definitions can be found in
[RFC 7531].
2.1. Basic Data Types
Table 1 lists the base NFSv4 data types.
+-----------------+-------------------------------------------------+
| Data Type | Definition |
+-----------------+-------------------------------------------------+
| int32_t | typedef int int32_t; |
| | |
| uint32_t | typedef unsigned int uint32_t; |
| | |
| int64_t | typedef hyper int64_t; |
| | |
| uint64_t | typedef unsigned hyper uint64_t; |
| | |
| attrlist4 | typedef opaque attrlist4<>; |
| | |
| | Used for file/directory attributes. |
| | |
| bitmap4 | typedef uint32_t bitmap4<>; |
| | |
| | Used in attribute array encoding. |
| | |
| changeid4 | typedef uint64_t changeid4; |
| | |
| | Used in the definition of change_info4. |
| | |
| clientid4 | typedef uint64_t clientid4; |
| | |
| | Shorthand reference to client identification. |
| | |
| count4 | typedef uint32_t count4; |
| | |
| | Various count parameters (READ, WRITE, COMMIT). |
| | |
| length4 | typedef uint64_t length4; |
| | |
| | Describes LOCK lengths. |
| | |
Haynes & Noveck Standards Track PAGE 18
RFC 7530 NFSv4 March 2015
| mode4 | typedef uint32_t mode4; |
| | |
| | Mode attribute data type. |
| | |
| nfs_cookie4 | typedef uint64_t nfs_cookie4; |
| | |
| | Opaque cookie value for READDIR. |
| | |
| nfs_fh4 | typedef opaque nfs_fh4<NFS4_FHSIZE>; |
| | |
| | Filehandle definition. |
| | |
| nfs_ftype4 | enum nfs_ftype4; |
| | |
| | Various defined file types. |
| | |
| nfsstat4 | enum nfsstat4; |
| | |
| | Return value for operations. |
| | |
| nfs_lease4 | typedef uint32_t nfs_lease4; |
| | |
| | Duration of a lease in seconds. |
| | |
| offset4 | typedef uint64_t offset4; |
| | |
| | Various offset designations (READ, WRITE, LOCK, |
| | COMMIT). |
| | |
| qop4 | typedef uint32_t qop4; |
| | |
| | Quality of protection designation in SECINFO. |
| | |
| sec_oid4 | typedef opaque sec_oid4<>; |
| | |
| | Security Object Identifier. The sec_oid4 data |
| | type is not really opaque. Instead, it |
| | contains an ASN.1 OBJECT IDENTIFIER as used by |
| | GSS-API in the mech_type argument to |
| | GSS_Init_sec_context. See [RFC 2743] for |
| | details. |
| | |
| seqid4 | typedef uint32_t seqid4; |
| | |
| | Sequence identifier used for file locking. |
| | |
Haynes & Noveck Standards Track PAGE 19
RFC 7530 NFSv4 March 2015
| utf8string | typedef opaque utf8string<>; |
| | |
| | UTF-8 encoding for strings. |
| | |
| utf8str_cis | typedef utf8string utf8str_cis; |
| | |
| | Case-insensitive UTF-8 string. |
| | |
| utf8str_cs | typedef utf8string utf8str_cs; |
| | |
| | Case-sensitive UTF-8 string. |
| | |
| utf8str_mixed | typedef utf8string utf8str_mixed; |
| | |
| | UTF-8 strings with a case-sensitive prefix and |
| | a case-insensitive suffix. |
| | |
| component4 | typedef utf8str_cs component4; |
| | |
| | Represents pathname components. |
| | |
| linktext4 | typedef opaque linktext4<>; |
| | |
| | Symbolic link contents ("symbolic link" is |
| | defined in an Open Group [openg_symlink] |
| | standard). |
| | |
| ascii_REQUIRED4 | typedef utf8string ascii_REQUIRED4; |
| | |
| | String is sent as ASCII and thus is |
| | automatically UTF-8. |
| | |
| pathname4 | typedef component4 pathname4<>; |
| | |
| | Represents pathname for fs_locations. |
| | |
| nfs_lockid4 | typedef uint64_t nfs_lockid4; |
| | |
| verifier4 | typedef opaque verifier4[NFS4_VERIFIER_SIZE]; |
| | |
| | Verifier used for various operations (COMMIT, |
| | CREATE, OPEN, READDIR, WRITE) |
| | NFS4_VERIFIER_SIZE is defined as 8. |
+-----------------+-------------------------------------------------+
Table 1: Base NFSv4 Data Types
Haynes & Noveck Standards Track PAGE 20
RFC 7530 NFSv4 March 2015
2.2. Structured Data Types
2.2.1. nfstime4
struct nfstime4 {
int64_t seconds;
uint32_t nseconds;
};
The nfstime4 structure gives the number of seconds and nanoseconds
since midnight or 0 hour January 1, 1970 Coordinated Universal Time
(UTC). Values greater than zero for the seconds field denote dates
after the 0 hour January 1, 1970. Values less than zero for the
seconds field denote dates before the 0 hour January 1, 1970. In
both cases, the nseconds field is to be added to the seconds field
for the final time representation. For example, if the time to be
represented is one-half second before 0 hour January 1, 1970, the
seconds field would have a value of negative one (-1) and the
nseconds fields would have a value of one-half second (500000000).
Values greater than 999,999,999 for nseconds are considered invalid.
This data type is used to pass time and date information. A server
converts to and from its local representation of time when processing
time values, preserving as much accuracy as possible. If the
precision of timestamps stored for a file system object is less than
defined, loss of precision can occur. An adjunct time maintenance
protocol is recommended to reduce client and server time skew.
2.2.2. time_how4
enum time_how4 {
SET_TO_SERVER_TIME4 = 0,
SET_TO_CLIENT_TIME4 = 1
};
2.2.3. settime4
union settime4 switch (time_how4 set_it) {
case SET_TO_CLIENT_TIME4:
nfstime4 time;
default:
void;
};
The above definitions are used as the attribute definitions to set
time values. If set_it is SET_TO_SERVER_TIME4, then the server uses
its local representation of time for the time value.
Haynes & Noveck Standards Track PAGE 21
RFC 7530 NFSv4 March 2015
2.2.4. specdata4
struct specdata4 {
uint32_t specdata1; /* major device number */
uint32_t specdata2; /* minor device number */
};
This data type represents additional information for the device file
types NF4CHR and NF4BLK.
2.2.5. fsid4
struct fsid4 {
uint64_t major;
uint64_t minor;
};
This type is the file system identifier that is used as a REQUIRED
attribute.
2.2.6. fs_location4
struct fs_location4 {
utf8str_cis server<>;
pathname4 rootpath;
};
2.2.7. fs_locations4
struct fs_locations4 {
pathname4 fs_root;
fs_location4 locations<>;
};
The fs_location4 and fs_locations4 data types are used for the
fs_locations RECOMMENDED attribute, which is used for migration and
replication support.
2.2.8. fattr4
struct fattr4 {
bitmap4 attrmask;
attrlist4 attr_vals;
};
The fattr4 structure is used to represent file and directory
attributes.
Haynes & Noveck Standards Track PAGE 22
RFC 7530 NFSv4 March 2015
The bitmap is a counted array of 32-bit integers used to contain bit
values. The position of the integer in the array that contains bit n
can be computed from the expression (n / 32), and its bit within that
integer is (n mod 32).
0 1
+-----------+-----------+-----------+--
| count | 31 .. 0 | 63 .. 32 |
+-----------+-----------+-----------+--
2.2.9. change_info4
struct change_info4 {
bool atomic;
changeid4 before;
changeid4 after;
};
This structure is used with the CREATE, LINK, REMOVE, and RENAME
operations to let the client know the value of the change attribute
for the directory in which the target file system object resides.
2.2.10. clientaddr4
struct clientaddr4 {
/* see struct rpcb in RFC 1833 */
string r_netid<>; /* network id */
string r_addr<>; /* universal address */
};
The clientaddr4 structure is used as part of the SETCLIENTID
operation, either (1) to specify the address of the client that is
using a client ID or (2) as part of the callback registration. The
r_netid and r_addr fields respectively contain a network id and
universal address. The network id and universal address concepts,
together with formats for TCP over IPv4 and TCP over IPv6, are
defined in [RFC 5665], specifically Tables 2 and 3 and
Sections 5.2.3.3 and 5.2.3.4.
2.2.11. cb_client4
struct cb_client4 {
unsigned int cb_program;
clientaddr4 cb_location;
};
This structure is used by the client to inform the server of its
callback address; it includes the program number and client address.
Haynes & Noveck Standards Track PAGE 23
RFC 7530 NFSv4 March 2015
2.2.12. nfs_client_id4
struct nfs_client_id4 {
verifier4 verifier;
opaque id<NFS4_OPAQUE_LIMIT>;
};
This structure is part of the arguments to the SETCLIENTID operation.
2.2.13. open_owner4
struct open_owner4 {
clientid4 clientid;
opaque owner<NFS4_OPAQUE_LIMIT>;
};
This structure is used to identify the owner of open state.
2.2.14. lock_owner4
struct lock_owner4 {
clientid4 clientid;
opaque owner<NFS4_OPAQUE_LIMIT>;
};
This structure is used to identify the owner of file locking state.
2.2.15. open_to_lock_owner4
struct open_to_lock_owner4 {
seqid4 open_seqid;
stateid4 open_stateid;
seqid4 lock_seqid;
lock_owner4 lock_owner;
};
This structure is used for the first LOCK operation done for an
open_owner4. It provides both the open_stateid and lock_owner such
that the transition is made from a valid open_stateid sequence to
that of the new lock_stateid sequence. Using this mechanism avoids
the confirmation of the lock_owner/lock_seqid pair since it is tied
to established state in the form of the open_stateid/open_seqid.
Haynes & Noveck Standards Track PAGE 24
RFC 7530 NFSv4 March 2015
2.2.16. stateid4
struct stateid4 {
uint32_t seqid;
opaque other[NFS4_OTHER_SIZE];
};
This structure is used for the various state-sharing mechanisms
between the client and server. For the client, this data structure
is read-only. The server is required to increment the seqid field
monotonically at each transition of the stateid. This is important
since the client will inspect the seqid in OPEN stateids to determine
the order of OPEN processing done by the server.
3. RPC and Security Flavor
The NFSv4 protocol is an RPC application that uses RPC version 2 and
the XDR as defined in [RFC 5531] and [RFC 4506]. The RPCSEC_GSS
security flavors as defined in version 1 ([RFC 2203]) and version 2
([RFC 5403]) MUST be implemented as the mechanism to deliver stronger
security for the NFSv4 protocol. However, deployment of RPCSEC_GSS
is optional.
3.1. Ports and Transports
Historically, NFSv2 and NFSv3 servers have resided on port 2049. The
registered port 2049 [RFC 3232] for the NFS protocol SHOULD be the
default configuration. Using the registered port for NFS services
means the NFS client will not need to use the RPC binding protocols
as described in [RFC 1833]; this will allow NFS to transit firewalls.
Where an NFSv4 implementation supports operation over the IP network
protocol, the supported transport layer between NFS and IP MUST be an
IETF standardized transport protocol that is specified to avoid
network congestion; such transports include TCP and the Stream
Control Transmission Protocol (SCTP). To enhance the possibilities
for interoperability, an NFSv4 implementation MUST support operation
over the TCP transport protocol.
If TCP is used as the transport, the client and server SHOULD use
persistent connections. This will prevent the weakening of TCP's
congestion control via short-lived connections and will improve
performance for the Wide Area Network (WAN) environment by
eliminating the need for SYN handshakes.
As noted in Section 19, the authentication model for NFSv4 has moved
from machine-based to principal-based. However, this modification of
the authentication model does not imply a technical requirement to
Haynes & Noveck Standards Track PAGE 25
RFC 7530 NFSv4 March 2015
move the TCP connection management model from whole machine-based to
one based on a per-user model. In particular, NFS over TCP client
implementations have traditionally multiplexed traffic for multiple
users over a common TCP connection between an NFS client and server.
This has been true, regardless of whether the NFS client is using
AUTH_SYS, AUTH_DH, RPCSEC_GSS, or any other flavor. Similarly, NFS
over TCP server implementations have assumed such a model and thus
scale the implementation of TCP connection management in proportion
to the number of expected client machines. It is intended that NFSv4
will not modify this connection management model. NFSv4 clients that
violate this assumption can expect scaling issues on the server and
hence reduced service.
3.1.1. Client Retransmission Behavior
When processing an NFSv4 request received over a reliable transport
such as TCP, the NFSv4 server MUST NOT silently drop the request,
except if the established transport connection has been broken.
Given such a contract between NFSv4 clients and servers, clients MUST
NOT retry a request unless one or both of the following are true:
o The transport connection has been broken
o The procedure being retried is the NULL procedure
Since reliable transports, such as TCP, do not always synchronously
inform a peer when the other peer has broken the connection (for
example, when an NFS server reboots), the NFSv4 client may want to
actively "probe" the connection to see if has been broken. Use of
the NULL procedure is one recommended way to do so. So, when a
client experiences a remote procedure call timeout (of some arbitrary
implementation-specific amount), rather than retrying the remote
procedure call, it could instead issue a NULL procedure call to the
server. If the server has died, the transport connection break will
eventually be indicated to the NFSv4 client. The client can then
reconnect, and then retry the original request. If the NULL
procedure call gets a response, the connection has not broken. The
client can decide to wait longer for the original request's response,
or it can break the transport connection and reconnect before
re-sending the original request.
For callbacks from the server to the client, the same rules apply,
but the server doing the callback becomes the client, and the client
receiving the callback becomes the server.
Haynes & Noveck Standards Track PAGE 26
RFC 7530 NFSv4 March 2015
3.2. Security Flavors
Traditional RPC implementations have included AUTH_NONE, AUTH_SYS,
AUTH_DH, and AUTH_KRB4 as security flavors. With [RFC 2203], an
additional security flavor of RPCSEC_GSS has been introduced, which
uses the functionality of GSS-API [RFC 2743]. This allows for the use
of various security mechanisms by the RPC layer without the
additional implementation overhead of adding RPC security flavors.
For NFSv4, the RPCSEC_GSS security flavor MUST be used to enable the
mandatory-to-implement security mechanism. Other flavors, such as
AUTH_NONE, AUTH_SYS, and AUTH_DH, MAY be implemented as well.
3.2.1. Security Mechanisms for NFSv4
RPCSEC_GSS, via GSS-API, supports multiple mechanisms that provide
security services. For interoperability, NFSv4 clients and servers
MUST support the Kerberos V5 security mechanism.
The use of RPCSEC_GSS requires selection of mechanism, quality of
protection (QOP), and service (authentication, integrity, privacy).
For the mandated security mechanisms, NFSv4 specifies that a QOP of
zero is used, leaving it up to the mechanism or the mechanism's
configuration to map QOP zero to an appropriate level of protection.
Each mandated mechanism specifies a minimum set of cryptographic
algorithms for implementing integrity and privacy. NFSv4 clients and
servers MUST be implemented on operating environments that comply
with the required cryptographic algorithms of each required
mechanism.
3.2.1.1. Kerberos V5 as a Security Triple
The Kerberos V5 GSS-API mechanism as described in [RFC 4121] MUST be
implemented with the RPCSEC_GSS services as specified in Table 2.
Both client and server MUST support each of the pseudo-flavors.
+--------+-------+----------------------+-----------------------+
| Number | Name | Mechanism's OID | RPCSEC_GSS service |
+--------+-------+----------------------+-----------------------+
| 390003 | krb5 | 1.2.840.113554.1.2.2 | rpc_gss_svc_none |
| 390004 | krb5i | 1.2.840.113554.1.2.2 | rpc_gss_svc_integrity |
| 390005 | krb5p | 1.2.840.113554.1.2.2 | rpc_gss_svc_privacy |
+--------+-------+----------------------+-----------------------+
Table 2: Mapping Pseudo-Flavor to Service
Note that the pseudo-flavor is presented here as a mapping aid to the
implementer. Because this NFS protocol includes a method to
negotiate security and it understands the GSS-API mechanism, the
Haynes & Noveck Standards Track PAGE 27
RFC 7530 NFSv4 March 2015
pseudo-flavor is not needed. The pseudo-flavor is needed for NFSv3
since the security negotiation is done via the MOUNT protocol as
described in [RFC 2623].
At the time this document was specified, the Advanced Encryption
Standard (AES) with HMAC-SHA1 was a required algorithm set for
Kerberos V5. In contrast, when NFSv4.0 was first specified in
[RFC 3530], weaker algorithm sets were REQUIRED for Kerberos V5, and
were REQUIRED in the NFSv4.0 specification, because the Kerberos V5
specification at the time did not specify stronger algorithms. The
NFSv4 specification does not specify required algorithms for Kerberos
V5, and instead, the implementer is expected to track the evolution
of the Kerberos V5 standard if and when stronger algorithms are
specified.
3.2.1.1.1. Security Considerations for Cryptographic Algorithms in
Kerberos V5
When deploying NFSv4, the strength of the security achieved depends
on the existing Kerberos V5 infrastructure. The algorithms of
Kerberos V5 are not directly exposed to or selectable by the client
or server, so there is some due diligence required by the user of
NFSv4 to ensure that security is acceptable where needed. Guidance
is provided in [RFC 6649] as to why weak algorithms should be disabled
by default.
3.3. Security Negotiation
With the NFSv4 server potentially offering multiple security
mechanisms, the client needs a method to determine or negotiate which
mechanism is to be used for its communication with the server. The
NFS server can have multiple points within its file system namespace
that are available for use by NFS clients. In turn, the NFS server
can be configured such that each of these entry points can have
different or multiple security mechanisms in use.
The security negotiation between client and server SHOULD be done
with a secure channel to eliminate the possibility of a third party
intercepting the negotiation sequence and forcing the client and
server to choose a lower level of security than required or desired.
See Section 19 for further discussion.
Haynes & Noveck Standards Track PAGE 28
RFC 7530 NFSv4 March 2015
3.3.1. SECINFO
The SECINFO operation will allow the client to determine, on a
per-filehandle basis, what security triple (see [RFC 2743] and
Section 16.31.4) is to be used for server access. In general, the
client will not have to use the SECINFO operation, except during
initial communication with the server or when the client encounters a
new security policy as the client navigates the namespace. Either
condition will force the client to negotiate a new security triple.
3.3.2. Security Error
Based on the assumption that each NFSv4 client and server MUST
support a minimum set of security (i.e., Kerberos V5 under
RPCSEC_GSS), the NFS client will start its communication with the
server with one of the minimal security triples. During
communication with the server, the client can receive an NFS error of
NFS4ERR_WRONGSEC. This error allows the server to notify the client
that the security triple currently being used is not appropriate for
access to the server's file system resources. The client is then
responsible for determining what security triples are available at
the server and choosing one that is appropriate for the client. See
Section 16.31 for further discussion of how the client will respond
to the NFS4ERR_WRONGSEC error and use SECINFO.
3.3.3. Callback RPC Authentication
Except as noted elsewhere in this section, the callback RPC
(described later) MUST mutually authenticate the NFS server to the
principal that acquired the client ID (also described later), using
the security flavor of the original SETCLIENTID operation used.
For AUTH_NONE, there are no principals, so this is a non-issue.
AUTH_SYS has no notions of mutual authentication or a server
principal, so the callback from the server simply uses the AUTH_SYS
credential that the user used when he set up the delegation.
For AUTH_DH, one commonly used convention is that the server uses the
credential corresponding to this AUTH_DH principal:
unix.host@domain
where host and domain are variables corresponding to the name of the
server host and directory services domain in which it lives, such as
a Network Information System domain or a DNS domain.
Haynes & Noveck Standards Track PAGE 29
RFC 7530 NFSv4 March 2015
Regardless of what security mechanism under RPCSEC_GSS is being used,
the NFS server MUST identify itself in GSS-API via a
GSS_C_NT_HOSTBASED_SERVICE name type. GSS_C_NT_HOSTBASED_SERVICE
names are of the form:
service@hostname
For NFS, the "service" element is:
nfs
Implementations of security mechanisms will convert nfs@hostname to
various different forms. For Kerberos V5, the following form is
RECOMMENDED:
nfs/hostname
For Kerberos V5, nfs/hostname would be a server principal in the
Kerberos Key Distribution Center database. This is the same
principal the client acquired a GSS-API context for when it issued
the SETCLIENTID operation; therefore, the realm name for the server
principal must be the same for the callback as it was for the
SETCLIENTID.
4. Filehandles
The filehandle in the NFS protocol is a per-server unique identifier
for a file system object. The contents of the filehandle are opaque
to the client. Therefore, the server is responsible for translating
the filehandle to an internal representation of the file system
object.
4.1. Obtaining the First Filehandle
The operations of the NFS protocol are defined in terms of one or
more filehandles. Therefore, the client needs a filehandle to
initiate communication with the server. With the NFSv2 protocol
[RFC 1094] and the NFSv3 protocol [RFC 1813], there exists an ancillary
protocol to obtain this first filehandle. The MOUNT protocol, RPC
program number 100005, provides the mechanism of translating a
string-based file system pathname to a filehandle that can then be
used by the NFS protocols.
The MOUNT protocol has deficiencies in the area of security and use
via firewalls. This is one reason that the use of the public
filehandle was introduced in [RFC 2054] and [RFC 2055]. With the use
of the public filehandle in combination with the LOOKUP operation in
Haynes & Noveck Standards Track PAGE 30
RFC 7530 NFSv4 March 2015
the NFSv2 and NFSv3 protocols, it has been demonstrated that the
MOUNT protocol is unnecessary for viable interaction between the NFS
client and server.
Therefore, the NFSv4 protocol will not use an ancillary protocol for
translation from string-based pathnames to a filehandle. Two special
filehandles will be used as starting points for the NFS client.
4.1.1. Root Filehandle
The first of the special filehandles is the root filehandle. The
root filehandle is the "conceptual" root of the file system namespace
at the NFS server. The client uses or starts with the root
filehandle by employing the PUTROOTFH operation. The PUTROOTFH
operation instructs the server to set the current filehandle to the
root of the server's file tree. Once this PUTROOTFH operation is
used, the client can then traverse the entirety of the server's file
tree with the LOOKUP operation. A complete discussion of the server
namespace is in Section 7.
4.1.2. Public Filehandle
The second special filehandle is the public filehandle. Unlike the
root filehandle, the public filehandle may be bound or represent an
arbitrary file system object at the server. The server is
responsible for this binding. It may be that the public filehandle
and the root filehandle refer to the same file system object.
However, it is up to the administrative software at the server and
the policies of the server administrator to define the binding of the
public filehandle and server file system object. The client may not
make any assumptions about this binding. The client uses the public
filehandle via the PUTPUBFH operation.
4.2. Filehandle Types
In the NFSv2 and NFSv3 protocols, there was one type of filehandle
with a single set of semantics, of which the primary one was that it
was persistent across a server reboot. As such, this type of
filehandle is termed "persistent" in NFSv4. The semantics of a
persistent filehandle remain the same as before. A new type of
filehandle introduced in NFSv4 is the volatile filehandle, which
attempts to accommodate certain server environments.
The volatile filehandle type was introduced to address server
functionality or implementation issues that make correct
implementation of a persistent filehandle infeasible. Some server
environments do not provide a file system level invariant that can be
used to construct a persistent filehandle. The underlying server
Haynes & Noveck Standards Track PAGE 31
RFC 7530 NFSv4 March 2015
file system may not provide the invariant, or the server's file
system programming interfaces may not provide access to the needed
invariant. Volatile filehandles may ease the implementation of
server functionality, such as hierarchical storage management or file
system reorganization or migration. However, the volatile filehandle
increases the implementation burden for the client.
Since the client will need to handle persistent and volatile
filehandles differently, a file attribute is defined that may be used
by the client to determine the filehandle types being returned by the
server.
4.2.1. General Properties of a Filehandle
The filehandle contains all the information the server needs to
distinguish an individual file. To the client, the filehandle is
opaque. The client stores filehandles for use in a later request and
can compare two filehandles from the same server for equality by
doing a byte-by-byte comparison. However, the client MUST NOT
otherwise interpret the contents of filehandles. If two filehandles
from the same server are equal, they MUST refer to the same file.
However, it is not required that two different filehandles refer to
different file system objects. Servers SHOULD try to maintain a
one-to-one correspondence between filehandles and file system objects
but there may be situations in which the mapping is not one-to-one.
Clients MUST use filehandle comparisons only to improve performance,
not for correct behavior. All clients need to be prepared for
situations in which it cannot be determined whether two different
filehandles denote the same object and in such cases need to avoid
assuming that objects denoted are different, as this might cause
incorrect behavior. Further discussion of filehandle and attribute
comparison in the context of data caching is presented in
Section 10.3.4.
As an example, in the case that two different pathnames when
traversed at the server terminate at the same file system object, the
server SHOULD return the same filehandle for each path. This can
occur if a hard link is used to create two filenames that refer to
the same underlying file object and associated data. For example, if
paths /a/b/c and /a/d/c refer to the same file, the server SHOULD
return the same filehandle for both pathname traversals.
4.2.2. Persistent Filehandle
A persistent filehandle is defined as having a fixed value for the
lifetime of the file system object to which it refers. Once the
server creates the filehandle for a file system object, the server
MUST accept the same filehandle for the object for the lifetime of
Haynes & Noveck Standards Track PAGE 32
RFC 7530 NFSv4 March 2015
the object. If the server restarts or reboots, the NFS server must
honor the same filehandle value as it did in the server's previous
instantiation. Similarly, if the file system is migrated, the new
NFS server must honor the same filehandle as the old NFS server.
The persistent filehandle will become stale or invalid when the file
system object is removed. When the server is presented with a
persistent filehandle that refers to a deleted object, it MUST return
an error of NFS4ERR_STALE. A filehandle may become stale when the
file system containing the object is no longer available. The file
system may become unavailable if it exists on removable media and the
media is no longer available at the server, or if the file system in
whole has been destroyed, or if the file system has simply been
removed from the server's namespace (i.e., unmounted in a UNIX
environment).
4.2.3. Volatile Filehandle
A volatile filehandle does not share the same longevity
characteristics of a persistent filehandle. The server may determine
that a volatile filehandle is no longer valid at many different
points in time. If the server can definitively determine that a
volatile filehandle refers to an object that has been removed, the
server should return NFS4ERR_STALE to the client (as is the case for
persistent filehandles). In all other cases where the server
determines that a volatile filehandle can no longer be used, it
should return an error of NFS4ERR_FHEXPIRED.
The REQUIRED attribute "fh_expire_type" is used by the client to
determine what type of filehandle the server is providing for a
particular file system. This attribute is a bitmask with the
following values:
FH4_PERSISTENT: The value of FH4_PERSISTENT is used to indicate a
persistent filehandle, which is valid until the object is removed
from the file system. The server will not return
NFS4ERR_FHEXPIRED for this filehandle. FH4_PERSISTENT is defined
as a value in which none of the bits specified below are set.
FH4_VOLATILE_ANY: The filehandle may expire at any time, except as
specifically excluded (i.e., FH4_NOEXPIRE_WITH_OPEN).
FH4_NOEXPIRE_WITH_OPEN: May only be set when FH4_VOLATILE_ANY is
set. If this bit is set, then the meaning of FH4_VOLATILE_ANY
is qualified to exclude any expiration of the filehandle when it
is open.
Haynes & Noveck Standards Track PAGE 33
RFC 7530 NFSv4 March 2015
FH4_VOL_MIGRATION: The filehandle will expire as a result of
migration. If FH4_VOLATILE_ANY is set, FH4_VOL_MIGRATION is
redundant.
FH4_VOL_RENAME: The filehandle will expire during rename. This
includes a rename by the requesting client or a rename by any
other client. If FH4_VOLATILE_ANY is set, FH4_VOL_RENAME is
redundant.
Servers that provide volatile filehandles that may expire while open
(i.e., if FH4_VOL_MIGRATION or FH4_VOL_RENAME is set or if
FH4_VOLATILE_ANY is set and FH4_NOEXPIRE_WITH_OPEN is not set) should
deny a RENAME or REMOVE that would affect an OPEN file of any of the
components leading to the OPEN file. In addition, the server SHOULD
deny all RENAME or REMOVE requests during the grace period upon
server restart.
Note that the bits FH4_VOL_MIGRATION and FH4_VOL_RENAME allow the
client to determine that expiration has occurred whenever a specific
event occurs, without an explicit filehandle expiration error from
the server. FH4_VOLATILE_ANY does not provide this form of
information. In situations where the server will expire many, but
not all, filehandles upon migration (e.g., all but those that are
open), FH4_VOLATILE_ANY (in this case, with FH4_NOEXPIRE_WITH_OPEN)
is a better choice since the client may not assume that all
filehandles will expire when migration occurs, and it is likely that
additional expirations will occur (as a result of file CLOSE) that
are separated in time from the migration event itself.
4.2.4. One Method of Constructing a Volatile Filehandle
A volatile filehandle, while opaque to the client, could contain:
[volatile bit = 1 | server boot time | slot | generation number]
o slot is an index in the server volatile filehandle table
o generation number is the generation number for the table
entry/slot
When the client presents a volatile filehandle, the server makes the
following checks, which assume that the check for the volatile bit
has passed. If the server boot time is less than the current server
boot time, return NFS4ERR_FHEXPIRED. If slot is out of range, return
NFS4ERR_BADHANDLE. If the generation number does not match, return
NFS4ERR_FHEXPIRED.
When the server reboots, the table is gone (it is volatile).
Haynes & Noveck Standards Track PAGE 34
RFC 7530 NFSv4 March 2015
If the volatile bit is 0, then it is a persistent filehandle with a
different structure following it.
4.3. Client Recovery from Filehandle Expiration
If possible, the client should recover from the receipt of an
NFS4ERR_FHEXPIRED error. The client must take on additional
responsibility so that it may prepare itself to recover from the
expiration of a volatile filehandle. If the server returns
persistent filehandles, the client does not need these additional
steps.
For volatile filehandles, most commonly the client will need to store
the component names leading up to and including the file system
object in question. With these names, the client should be able to
recover by finding a filehandle in the namespace that is still
available or by starting at the root of the server's file system
namespace.
If the expired filehandle refers to an object that has been removed
from the file system, obviously the client will not be able to
recover from the expired filehandle.
It is also possible that the expired filehandle refers to a file that
has been renamed. If the file was renamed by another client, again
it is possible that the original client will not be able to recover.
However, in the case that the client itself is renaming the file and
the file is open, it is possible that the client may be able to
recover. The client can determine the new pathname based on the
processing of the rename request. The client can then regenerate the
new filehandle based on the new pathname. The client could also use
the COMPOUND operation mechanism to construct a set of operations
like:
RENAME A B
LOOKUP B
GETFH
Note that the COMPOUND procedure does not provide atomicity. This
example only reduces the overhead of recovering from an expired
filehandle.
5. Attributes
To meet the requirements of extensibility and increased
interoperability with non-UNIX platforms, attributes need to be
handled in a flexible manner. The NFSv3 fattr3 structure contains a
fixed list of attributes that not all clients and servers are able to
Haynes & Noveck Standards Track PAGE 35
RFC 7530 NFSv4 March 2015
support or care about. The fattr3 structure cannot be extended as
new needs arise, and it provides no way to indicate non-support.
With the NFSv4.0 protocol, the client is able to query what
attributes the server supports and construct requests with only those
supported attributes (or a subset thereof).
To this end, attributes are divided into three groups: REQUIRED,
RECOMMENDED, and named. Both REQUIRED and RECOMMENDED attributes are
supported in the NFSv4.0 protocol by a specific and well-defined
encoding and are identified by number. They are requested by setting
a bit in the bit vector sent in the GETATTR request; the server
response includes a bit vector to list what attributes were returned
in the response. New REQUIRED or RECOMMENDED attributes may be added
to the NFSv4 protocol as part of a new minor version by publishing a
Standards Track RFC that allocates a new attribute number value and
defines the encoding for the attribute. See Section 11 for further
discussion.
Named attributes are accessed by the OPENATTR operation, which
accesses a hidden directory of attributes associated with a file
system object. OPENATTR takes a filehandle for the object and
returns the filehandle for the attribute hierarchy. The filehandle
for the named attributes is a directory object accessible by LOOKUP
or READDIR and contains files whose names represent the named
attributes and whose data bytes are the value of the attribute. For
example:
+----------+-----------+---------------------------------+
| LOOKUP | "foo" | ; look up file |
| GETATTR | attrbits | |
| OPENATTR | | ; access foo's named attributes |
| LOOKUP | "x11icon" | ; look up specific attribute |
| READ | 0,4096 | ; read stream of bytes |
+----------+-----------+---------------------------------+
Named attributes are intended for data needed by applications rather
than by an NFS client implementation. NFS implementers are strongly
encouraged to define their new attributes as RECOMMENDED attributes
by bringing them to the IETF Standards Track process.
The set of attributes that are classified as REQUIRED is deliberately
small since servers need to do whatever it takes to support them. A
server should support as many of the RECOMMENDED attributes as
possible; however, by their definition, the server is not required to
support all of them. Attributes are deemed REQUIRED if the data is
both needed by a large number of clients and is not otherwise
reasonably computable by the client when support is not provided on
the server.
Haynes & Noveck Standards Track PAGE 36
RFC 7530 NFSv4 March 2015
Note that the hidden directory returned by OPENATTR is a convenience
for protocol processing. The client should not make any assumptions
about the server's implementation of named attributes and whether or
not the underlying file system at the server has a named attribute
directory. Therefore, operations such as SETATTR and GETATTR on the
named attribute directory are undefined.
5.1. REQUIRED Attributes
These attributes MUST be supported by every NFSv4.0 client and server
in order to ensure a minimum level of interoperability. The server
MUST store and return these attributes, and the client MUST be able
to function with an attribute set limited to these attributes. With
just the REQUIRED attributes, some client functionality can be
impaired or limited in some ways. A client can ask for any of these
attributes to be returned by setting a bit in the GETATTR request.
For each such bit set, the server MUST return the corresponding
attribute value.
5.2. RECOMMENDED Attributes
These attributes are understood well enough to warrant support in the
NFSv4.0 protocol. However, they may not be supported on all clients
and servers. A client MAY ask for any of these attributes to be
returned by setting a bit in the GETATTR request but MUST handle the
case where the server does not return them. A client MAY ask for the
set of attributes the server supports and SHOULD NOT request
attributes the server does not support. A server should be tolerant
of requests for unsupported attributes and simply not return them,
rather than considering the request an error. It is expected that
servers will support all attributes they comfortably can and only
fail to support attributes that are difficult to support in their
operating environments. A server should provide attributes whenever
they don't have to "tell lies" to the client. For example, a file
modification time either should be an accurate time or should not be
supported by the server. At times this will be difficult for
clients, but a client is better positioned to decide whether and how
to fabricate or construct an attribute or whether to do without the
attribute.
5.3. Named Attributes
These attributes are not supported by direct encoding in the NFSv4
protocol but are accessed by string names rather than numbers and
correspond to an uninterpreted stream of bytes that are stored with
the file system object. The namespace for these attributes may be
accessed by using the OPENATTR operation. The OPENATTR operation
returns a filehandle for a virtual "named attribute directory", and
Haynes & Noveck Standards Track PAGE 37
RFC 7530 NFSv4 March 2015
further perusal and modification of the namespace may be done using
operations that work on more typical directories. In particular,
READDIR may be used to get a list of such named attributes, and
LOOKUP and OPEN may select a particular attribute. Creation of a new
named attribute may be the result of an OPEN specifying file
creation.
Once an OPEN is done, named attributes may be examined and changed by
normal READ and WRITE operations using the filehandles and stateids
returned by OPEN.
Named attributes and the named attribute directory may have their own
(non-named) attributes. Each of these objects must have all of the
REQUIRED attributes and may have additional RECOMMENDED attributes.
However, the set of attributes for named attributes and the named
attribute directory need not be, and typically will not be, as large
as that for other objects in that file system.
Named attributes might be the target of delegations. However, since
granting of delegations is at the server's discretion, a server need
not support delegations on named attributes.
It is RECOMMENDED that servers support arbitrary named attributes.
A client should not depend on the ability to store any named
attributes in the server's file system. If a server does support
named attributes, a client that is also able to handle them should be
able to copy a file's data and metadata with complete transparency
from one location to another; this would imply that names allowed for
regular directory entries are valid for named attribute names
as well.
In NFSv4.0, the structure of named attribute directories is
restricted in a number of ways, in order to prevent the development
of non-interoperable implementations in which some servers support a
fully general hierarchical directory structure for named attributes
while others support a limited but adequate structure for named
attributes. In such an environment, clients or applications might
come to depend on non-portable extensions. The restrictions are:
o CREATE is not allowed in a named attribute directory. Thus, such
objects as symbolic links and special files are not allowed to be
named attributes. Further, directories may not be created in a
named attribute directory, so no hierarchical structure of named
attributes for a single object is allowed.
o If OPENATTR is done on a named attribute directory or on a named
attribute, the server MUST return an error.
Haynes & Noveck Standards Track PAGE 38
RFC 7530 NFSv4 March 2015
o Doing a RENAME of a named attribute to a different named attribute
directory or to an ordinary (i.e., non-named-attribute) directory
is not allowed.
o Creating hard links between named attribute directories or between
named attribute directories and ordinary directories is not
allowed.
Names of attributes will not be controlled by this document or other
IETF Standards Track documents. See Section 20 for further
discussion.
5.4. Classification of Attributes
Each of the attributes accessed using SETATTR and GETATTR (i.e.,
REQUIRED and RECOMMENDED attributes) can be classified in one of
three categories:
1. per-server attributes for which the value of the attribute will
be the same for all file objects that share the same server.
2. per-file system attributes for which the value of the attribute
will be the same for some or all file objects that share the same
server and fsid attribute (Section 5.8.1.9). See below for
details regarding when such sharing is in effect.
3. per-file system object attributes.
The handling of per-file system attributes depends on the particular
attribute and the setting of the homogeneous (Section 5.8.2.12)
attribute. The following rules apply:
1. The values of the attributes supported_attrs, fsid, homogeneous,
link_support, and symlink_support are always common to all
objects within the given file system.
2. For other attributes, different values may be returned for
different file system objects if the attribute homogeneous is
supported within the file system in question and has the value
false.
The classification of attributes is as follows. Note that the
attributes time_access_set and time_modify_set are not listed in this
section, because they are write-only attributes corresponding to
time_access and time_modify and are used in a special instance of
SETATTR.
Haynes & Noveck Standards Track PAGE 39
RFC 7530 NFSv4 March 2015
o The per-server attribute is:
lease_time
o The per-file system attributes are:
supported_attrs, fh_expire_type, link_support, symlink_support,
unique_handles, aclsupport, cansettime, case_insensitive,
case_preserving, chown_restricted, files_avail, files_free,
files_total, fs_locations, homogeneous, maxfilesize, maxname,
maxread, maxwrite, no_trunc, space_avail, space_free,
space_total, and time_delta
o The per-file system object attributes are:
type, change, size, named_attr, fsid, rdattr_error, filehandle,
acl, archive, fileid, hidden, maxlink, mimetype, mode,
numlinks, owner, owner_group, rawdev, space_used, system,
time_access, time_backup, time_create, time_metadata,
time_modify, and mounted_on_fileid
For quota_avail_hard, quota_avail_soft, and quota_used, see their
definitions below for the appropriate classification.
5.5. Set-Only and Get-Only Attributes
Some REQUIRED and RECOMMENDED attributes are set-only; i.e., they can
be set via SETATTR but not retrieved via GETATTR. Similarly, some
REQUIRED and RECOMMENDED attributes are get-only; i.e., they can be
retrieved via GETATTR but not set via SETATTR. If a client attempts
to set a get-only attribute or get a set-only attribute, the server
MUST return NFS4ERR_INVAL.
5.6. REQUIRED Attributes - List and Definition References
The list of REQUIRED attributes appears in Table 3. The meanings of
the columns of the table are:
o Name: The name of the attribute.
o ID: The number assigned to the attribute. In the event of
conflicts between the assigned number and [RFC 7531], the latter is
authoritative, but in such an event, it should be resolved with
errata to this document and/or [RFC 7531]. See [IESG_ERRATA] for
the errata process.
o Data Type: The XDR data type of the attribute.
Haynes & Noveck Standards Track PAGE 40
RFC 7530 NFSv4 March 2015
o Acc: Access allowed to the attribute. R means read-only (GETATTR
may retrieve, SETATTR may not set). W means write-only (SETATTR
may set, GETATTR may not retrieve). R W means read/write (GETATTR
may retrieve, SETATTR may set).
o Defined in: The section of this specification that describes the
attribute.
+-----------------+----+------------+-----+-------------------+
| Name | ID | Data Type | Acc | Defined in |
+-----------------+----+------------+-----+-------------------+
| supported_attrs | 0 | bitmap4 | R | Section 5.8.1.1 |
| type | 1 | nfs_ftype4 | R | Section 5.8.1.2 |
| fh_expire_type | 2 | uint32_t | R | Section 5.8.1.3 |
| change | 3 | changeid4 | R | Section 5.8.1.4 |
| size | 4 | uint64_t | R W | Section 5.8.1.5 |
| link_support | 5 | bool | R | Section 5.8.1.6 |
| symlink_support | 6 | bool | R | Section 5.8.1.7 |
| named_attr | 7 | bool | R | Section 5.8.1.8 |
| fsid | 8 | fsid4 | R | Section 5.8.1.9 |
| unique_handles | 9 | bool | R | Section 5.8.1.10 |
| lease_time | 10 | nfs_lease4 | R | Section 5.8.1.11 |
| rdattr_error | 11 | nfsstat4 | R | Section 5.8.1.12 |
| filehandle | 19 | nfs_fh4 | R | Section 5.8.1.13 |
+-----------------+----+------------+-----+-------------------+
Table 3: REQUIRED Attributes
5.7. RECOMMENDED Attributes - List and Definition References
The RECOMMENDED attributes are defined in Table 4. The meanings of
the column headers are the same as Table 3; see Section 5.6 for the
meanings.
+-------------------+----+-----------------+-----+------------------+
| Name | ID | Data Type | Acc | Defined in |
+-------------------+----+-----------------+-----+------------------+
| acl | 12 | nfsace4<> | R W | Section 6.2.1 |
| aclsupport | 13 | uint32_t | R | Section 6.2.1.2 |
| archive | 14 | bool | R W | Section 5.8.2.1 |
| cansettime | 15 | bool | R | Section 5.8.2.2 |
| case_insensitive | 16 | bool | R | Section 5.8.2.3 |
| case_preserving | 17 | bool | R | Section 5.8.2.4 |
| chown_restricted | 18 | bool | R | Section 5.8.2.5 |
| fileid | 20 | uint64_t | R | Section 5.8.2.6 |
| files_avail | 21 | uint64_t | R | Section 5.8.2.7 |
| files_free | 22 | uint64_t | R | Section 5.8.2.8 |
| files_total | 23 | uint64_t | R | Section 5.8.2.9 |
Haynes & Noveck Standards Track PAGE 41
RFC 7530 NFSv4 March 2015
| fs_locations | 24 | fs_locations4 | R | Section 5.8.2.10 |
| hidden | 25 | bool | R W | Section 5.8.2.11 |
| homogeneous | 26 | bool | R | Section 5.8.2.12 |
| maxfilesize | 27 | uint64_t | R | Section 5.8.2.13 |
| maxlink | 28 | uint32_t | R | Section 5.8.2.14 |
| maxname | 29 | uint32_t | R | Section 5.8.2.15 |
| maxread | 30 | uint64_t | R | Section 5.8.2.16 |
| maxwrite | 31 | uint64_t | R | Section 5.8.2.17 |
| mimetype | 32 | ascii_ | R W | Section 5.8.2.18 |
| | | REQUIRED4<> | | |
| mode | 33 | mode4 | R W | Section 6.2.2 |
| mounted_on_fileid | 55 | uint64_t | R | Section 5.8.2.19 |
| no_trunc | 34 | bool | R | Section 5.8.2.20 |
| numlinks | 35 | uint32_t | R | Section 5.8.2.21 |
| owner | 36 | utf8str_mixed | R W | Section 5.8.2.22 |
| owner_group | 37 | utf8str_mixed | R W | Section 5.8.2.23 |
| quota_avail_hard | 38 | uint64_t | R | Section 5.8.2.24 |
| quota_avail_soft | 39 | uint64_t | R | Section 5.8.2.25 |
| quota_used | 40 | uint64_t | R | Section 5.8.2.26 |
| rawdev | 41 | specdata4 | R | Section 5.8.2.27 |
| space_avail | 42 | uint64_t | R | Section 5.8.2.28 |
| space_free | 43 | uint64_t | R | Section 5.8.2.29 |
| space_total | 44 | uint64_t | R | Section 5.8.2.30 |
| space_used | 45 | uint64_t | R | Section 5.8.2.31 |
| system | 46 | bool | R W | Section 5.8.2.32 |
| time_access | 47 | nfstime4 | R | Section 5.8.2.33 |
| time_access_set | 48 | settime4 | W | Section 5.8.2.34 |
| time_backup | 49 | nfstime4 | R W | Section 5.8.2.35 |
| time_create | 50 | nfstime4 | R W | Section 5.8.2.36 |
| time_delta | 51 | nfstime4 | R | Section 5.8.2.37 |
| time_metadata | 52 | nfstime4 | R | Section 5.8.2.38 |
| time_modify | 53 | nfstime4 | R | Section 5.8.2.39 |
| time_modify_set | 54 | settime4 | W | Section 5.8.2.40 |
+-------------------+----+-----------------+-----+------------------+
Table 4: RECOMMENDED Attributes
5.8. Attribute Definitions
5.8.1. Definitions of REQUIRED Attributes
5.8.1.1. Attribute 0: supported_attrs
The bit vector that would retrieve all REQUIRED and RECOMMENDED
attributes that are supported for this object. The scope of this
attribute applies to all objects with a matching fsid.
Haynes & Noveck Standards Track PAGE 42
RFC 7530 NFSv4 March 2015
5.8.1.2. Attribute 1: type
Designates the type of an object in terms of one of a number of
special constants:
o NF4REG designates a regular file.
o NF4DIR designates a directory.
o NF4BLK designates a block device special file.
o NF4CHR designates a character device special file.
o NF4LNK designates a symbolic link.
o NF4SOCK designates a named socket special file.
o NF4FIFO designates a fifo special file.
o NF4ATTRDIR designates a named attribute directory.
o NF4NAMEDATTR designates a named attribute.
Within the explanatory text and operation descriptions, the following
phrases will be used with the meanings given below:
o The phrase "is a directory" means that the object's type attribute
is NF4DIR or NF4ATTRDIR.
o The phrase "is a special file" means that the object's type
attribute is NF4BLK, NF4CHR, NF4SOCK, or NF4FIFO.
o The phrase "is a regular file" means that the object's type
attribute is NF4REG or NF4NAMEDATTR.
o The phrase "is a symbolic link" means that the object's type
attribute is NF4LNK.
5.8.1.3. Attribute 2: fh_expire_type
The server uses this to specify filehandle expiration behavior to the
client. See Section 4 for additional description.
Haynes & Noveck Standards Track PAGE 43
RFC 7530 NFSv4 March 2015
5.8.1.4. Attribute 3: change
A value created by the server that the client can use to determine if
file data, directory contents, or attributes of the object have been
modified. The server MAY return the object's time_metadata attribute
for this attribute's value but only if the file system object cannot
be updated more frequently than the resolution of time_metadata.
5.8.1.5. Attribute 4: size
The size of the object in bytes.
5.8.1.6. Attribute 5: link_support
TRUE, if the object's file system supports hard links.
5.8.1.7. Attribute 6: symlink_support
TRUE, if the object's file system supports symbolic links.
5.8.1.8. Attribute 7: named_attr
TRUE, if this object has named attributes. In other words, this
object has a non-empty named attribute directory.
5.8.1.9. Attribute 8: fsid
Unique file system identifier for the file system holding this
object. The fsid attribute has major and minor components, each of
which are of data type uint64_t.
5.8.1.10. Attribute 9: unique_handles
TRUE, if two distinct filehandles are guaranteed to refer to two
different file system objects.
5.8.1.11. Attribute 10: lease_time
Duration of the lease at the server in seconds.
5.8.1.12. Attribute 11: rdattr_error
Error returned from an attempt to retrieve attributes during a
READDIR operation.
5.8.1.13. Attribute 19: filehandle
The filehandle of this object (primarily for READDIR requests).
Haynes & Noveck Standards Track PAGE 44
RFC 7530 NFSv4 March 2015
5.8.2. Definitions of Uncategorized RECOMMENDED Attributes
The definitions of most of the RECOMMENDED attributes follow.
Collections that share a common category are defined in other
sections.
5.8.2.1. Attribute 14: archive
TRUE, if this file has been archived since the time of the last
modification (deprecated in favor of time_backup).
5.8.2.2. Attribute 15: cansettime
TRUE, if the server is able to change the times for a file system
object as specified in a SETATTR operation.
5.8.2.3. Attribute 16: case_insensitive
TRUE, if filename comparisons on this file system are case
insensitive. This refers only to comparisons, and not to the case in
which filenames are stored.
5.8.2.4. Attribute 17: case_preserving
TRUE, if the filename case on this file system is preserved. This
refers only to how filenames are stored, and not to how they are
compared. Filenames stored in mixed case might be compared using
either case-insensitive or case-sensitive comparisons.
5.8.2.5. Attribute 18: chown_restricted
If TRUE, the server will reject any request to change either the
owner or the group associated with a file if the caller is not a
privileged user (for example, "root" in UNIX operating environments
or the "Take Ownership" privilege in Windows 2000).
5.8.2.6. Attribute 20: fileid
A number uniquely identifying the file within the file system.
5.8.2.7. Attribute 21: files_avail
File slots available to this user on the file system containing this
object -- this should be the smallest relevant limit.
Haynes & Noveck Standards Track PAGE 45
RFC 7530 NFSv4 March 2015
5.8.2.8. Attribute 22: files_free
Free file slots on the file system containing this object -- this
should be the smallest relevant limit.
5.8.2.9. Attribute 23: files_total
Total file slots on the file system containing this object.
5.8.2.10. Attribute 24: fs_locations
Locations where this file system may be found. If the server returns
NFS4ERR_MOVED as an error, this attribute MUST be supported.
The server specifies the rootpath for a given server by returning a
path consisting of zero path components.
5.8.2.11. Attribute 25: hidden
TRUE, if the file is considered hidden with respect to the
Windows API.
5.8.2.12. Attribute 26: homogeneous
TRUE, if this object's file system is homogeneous, i.e., all objects
in the file system (all objects on the server with the same fsid)
have common values for all per-file system attributes.
5.8.2.13. Attribute 27: maxfilesize
Maximum supported file size for the file system of this object.
5.8.2.14. Attribute 28: maxlink
Maximum number of hard links for this object.
5.8.2.15. Attribute 29: maxname
Maximum filename size supported for this object.
5.8.2.16. Attribute 30: maxread
Maximum amount of data the READ operation will return for this
object.
Haynes & Noveck Standards Track PAGE 46
RFC 7530 NFSv4 March 2015
5.8.2.17. Attribute 31: maxwrite
Maximum amount of data the WRITE operation will accept for this
object. This attribute SHOULD be supported if the file is writable.
Lack of this attribute can lead to the client either wasting
bandwidth or not receiving the best performance.
5.8.2.18. Attribute 32: mimetype
MIME media type/subtype of this object.
5.8.2.19. Attribute 55: mounted_on_fileid
Like fileid, but if the target filehandle is the root of a file
system, this attribute represents the fileid of the underlying
directory.
UNIX-based operating environments connect a file system into the
namespace by connecting (mounting) the file system onto the existing
file object (the mount point, usually a directory) of an existing
file system. When the mount point's parent directory is read via an
API such as readdir() [readdir_api], the return results are directory
entries, each with a component name and a fileid. The fileid of the
mount point's directory entry will be different from the fileid that
the stat() [stat] system call returns. The stat() system call is
returning the fileid of the root of the mounted file system, whereas
readdir() is returning the fileid that stat() would have returned
before any file systems were mounted on the mount point.
Unlike NFSv3, NFSv4.0 allows a client's LOOKUP request to cross other
file systems. The client detects the file system crossing whenever
the filehandle argument of LOOKUP has an fsid attribute different
from that of the filehandle returned by LOOKUP. A UNIX-based client
will consider this a "mount point crossing". UNIX has a legacy
scheme for allowing a process to determine its current working
directory. This relies on readdir() of a mount point's parent and
stat() of the mount point returning fileids as previously described.
The mounted_on_fileid attribute corresponds to the fileid that
readdir() would have returned, as described previously.
While the NFSv4.0 client could simply fabricate a fileid
corresponding to what mounted_on_fileid provides (and if the server
does not support mounted_on_fileid, the client has no choice), there
is a risk that the client will generate a fileid that conflicts with
one that is already assigned to another object in the file system.
Instead, if the server can provide the mounted_on_fileid, the
potential for client operational problems in this area is eliminated.
Haynes & Noveck Standards Track PAGE 47
RFC 7530 NFSv4 March 2015
If the server detects that there is nothing mounted on top of the
target file object, then the value for mounted_on_fileid that it
returns is the same as that of the fileid attribute.
The mounted_on_fileid attribute is RECOMMENDED, so the server SHOULD
provide it if possible, and for a UNIX-based server, this is
straightforward. Usually, mounted_on_fileid will be requested during
a READDIR operation, in which case it is trivial (at least for
UNIX-based servers) to return mounted_on_fileid since it is equal to
the fileid of a directory entry returned by readdir(). If
mounted_on_fileid is requested in a GETATTR operation, the server
should obey an invariant that has it returning a value that is equal
to the file object's entry in the object's parent directory, i.e.,
what readdir() would have returned. Some operating environments
allow a series of two or more file systems to be mounted onto a
single mount point. In this case, for the server to obey the
aforementioned invariant, it will need to find the base mount point,
and not the intermediate mount points.
5.8.2.20. Attribute 34: no_trunc
If this attribute is TRUE, then if the client uses a filename longer
than name_max, an error will be returned instead of the name being
truncated.
5.8.2.21. Attribute 35: numlinks
Number of hard links to this object.
5.8.2.22. Attribute 36: owner
The string name of the owner of this object.
5.8.2.23. Attribute 37: owner_group
The string name of the group ownership of this object.
5.8.2.24. Attribute 38: quota_avail_hard
The value in bytes that represents the amount of additional disk
space beyond the current allocation that can be allocated to this
file or directory before further allocations will be refused. It is
understood that this space may be consumed by allocations to other
files or directories.
Haynes & Noveck Standards Track PAGE 48
RFC 7530 NFSv4 March 2015
5.8.2.25. Attribute 39: quota_avail_soft
The value in bytes that represents the amount of additional disk
space that can be allocated to this file or directory before the user
may reasonably be warned. It is understood that this space may be
consumed by allocations to other files or directories, though there
may exist server-side rules as to which other files or directories.
5.8.2.26. Attribute 40: quota_used
The value in bytes that represents the amount of disk space used by
this file or directory and possibly a number of other similar files
or directories, where the set of "similar" meets at least the
criterion that allocating space to any file or directory in the set
will reduce the "quota_avail_hard" of every other file or directory
in the set.
Note that there may be a number of distinct but overlapping sets of
files or directories for which a quota_used value is maintained,
e.g., "all files with a given owner", "all files with a given group
owner", etc. The server is at liberty to choose any of those sets
when providing the content of the quota_used attribute but should do
so in a repeatable way. The rule may be configured per file system
or may be "choose the set with the smallest quota".
5.8.2.27. Attribute 41: rawdev
Raw device number of file of type NF4BLK or NF4CHR. The device
number is split into major and minor numbers. If the file's type
attribute is not NF4BLK or NF4CHR, this attribute SHOULD NOT be
returned, and any value returned SHOULD NOT be considered useful.
5.8.2.28. Attribute 42: space_avail
Disk space in bytes available to this user on the file system
containing this object -- this should be the smallest relevant limit.
5.8.2.29. Attribute 43: space_free
Free disk space in bytes on the file system containing this object --
this should be the smallest relevant limit.
5.8.2.30. Attribute 44: space_total
Total disk space in bytes on the file system containing this object.
Haynes & Noveck Standards Track PAGE 49
RFC 7530 NFSv4 March 2015
5.8.2.31. Attribute 45: space_used
Number of file system bytes allocated to this object.
5.8.2.32. Attribute 46: system
TRUE, if this file is a "system" file with respect to the Windows
operating environment.
5.8.2.33. Attribute 47: time_access
Represents the time of last access to the object by a READ operation
sent to the server. The notion of what is an "access" depends on the
server's operating environment and/or the server's file system
semantics. For example, for servers obeying Portable Operating
System Interface (POSIX) semantics, time_access would be updated only
by the READ and READDIR operations and not any of the operations that
modify the content of the object [read_api], [readdir_api],
[write_api]. Of course, setting the corresponding time_access_set
attribute is another way to modify the time_access attribute.
Whenever the file object resides on a writable file system, the
server should make its best efforts to record time_access into stable
storage. However, to mitigate the performance effects of doing so,
and most especially whenever the server is satisfying the read of the
object's content from its cache, the server MAY cache access time
updates and lazily write them to stable storage. It is also
acceptable to give administrators of the server the option to disable
time_access updates.
5.8.2.34. Attribute 48: time_access_set
Sets the time of last access to the object. SETATTR use only.
5.8.2.35. Attribute 49: time_backup
The time of last backup of the object.
5.8.2.36. Attribute 50: time_create
The time of creation of the object. This attribute does not have
any relation to the traditional UNIX file attribute "ctime"
("change time").
5.8.2.37. Attribute 51: time_delta
Smallest useful server time granularity.
Haynes & Noveck Standards Track PAGE 50
RFC 7530 NFSv4 March 2015
5.8.2.38. Attribute 52: time_metadata
The time of last metadata modification of the object.
5.8.2.39. Attribute 53: time_modify
The time of last modification to the object.
5.8.2.40. Attribute 54: time_modify_set
Sets the time of last modification to the object. SETATTR use only.
5.9. Interpreting owner and owner_group
The RECOMMENDED attributes "owner" and "owner_group" (and also users
and groups used as values of the who field within nfs4ace structures
used in the acl attribute) are represented in the form of UTF-8
strings. This format avoids the use of a representation that is tied
to a particular underlying implementation at the client or server.
Note that Section 6.1 of [RFC 2624] provides additional rationale. It
is expected that the client and server will have their own local
representation of owners and groups that is used for local storage or
presentation to the application via APIs that expect such a
representation. Therefore, the protocol requires that when these
attributes are transferred between the client and server, the local
representation is translated to a string of the form
"identifier@dns_domain". This allows clients and servers that do not
use the same local representation to effectively interoperate since
they both use a common syntax that can be interpreted by both.
Similarly, security principals may be represented in different ways
by different security mechanisms. Servers normally translate these
representations into a common format, generally that used by local
storage, to serve as a means of identifying the users corresponding
to these security principals. When these local identifiers are
translated to the form of the owner attribute, associated with files
created by such principals, they identify, in a common format, the
users associated with each corresponding set of security principals.
The translation used to interpret owner and group strings is not
specified as part of the protocol. This allows various solutions to
be employed. For example, a local translation table may be consulted
that maps a numeric identifier to the user@dns_domain syntax. A name
service may also be used to accomplish the translation. A server may
provide a more general service, not limited by any particular
translation (which would only translate a limited set of possible
strings) by storing the owner and owner_group attributes in local
storage without any translation, or it may augment a translation
Haynes & Noveck Standards Track PAGE 51
RFC 7530 NFSv4 March 2015
method by storing the entire string for attributes for which no
translation is available while using the local representation for
those cases in which a translation is available.
Servers that do not provide support for all possible values of user
and group strings SHOULD return an error (NFS4ERR_BADOWNER) when a
string is presented that has no translation, as the value to be set
for a SETATTR of the owner or owner_group attributes or as part of
the value of the acl attribute. When a server does accept a user or
group string as valid on a SETATTR, it is promising to return that
same string (see below) when a corresponding GETATTR is done, as long
as there has been no further change in the corresponding attribute
before the GETATTR. For some internationalization-related exceptions
where this is not possible, see below. Configuration changes
(including changes from the mapping of the string to the local
representation) and ill-constructed name translations (those that
contain aliasing) may make that promise impossible to honor. Servers
should make appropriate efforts to avoid a situation in which these
attributes have their values changed when no real change to either
ownership or acls has occurred.
The "dns_domain" portion of the owner string is meant to be a DNS
domain name -- for example, "user@example.org". Servers should
accept as valid a set of users for at least one domain. A server may
treat other domains as having no valid translations. A more general
service is provided when a server is capable of accepting users for
multiple domains, or for all domains, subject to security
constraints.
As an implementation guide, both clients and servers may provide a
means to configure the "dns_domain" portion of the owner string. For
example, the DNS domain name of the host running the NFS server might
be "lab.example.org", but the user names are defined in
"example.org". In the absence of such a configuration, or as a
default, the current DNS domain name of the server should be the
value used for the "dns_domain".
As mentioned above, it is desirable that a server, when accepting a
string of the form "user@domain" or "group@domain" in an attribute,
return this same string when that corresponding attribute is fetched.
Internationalization issues make this impossible under certain
circumstances, and the client needs to take note of these. See
Section 12 for a detailed discussion of these issues.
In the case where there is no translation available to the client or
server, the attribute value will be constructed without the "@".
Therefore, the absence of the "@" from the owner or owner_group
attribute signifies that no translation was available at the sender
Haynes & Noveck Standards Track PAGE 52
RFC 7530 NFSv4 March 2015
and that the receiver of the attribute should not use that string as
a basis for translation into its own internal format. Even though
the attribute value cannot be translated, it may still be useful. In
the case of a client, the attribute string may be used for local
display of ownership.
To provide a greater degree of compatibility with NFSv3, which
identified users and groups by 32-bit unsigned user identifiers and
group identifiers, owner and group strings that consist of ASCII-
encoded decimal numeric values with no leading zeros can be given a
special interpretation by clients and servers that choose to provide
such support. The receiver may treat such a user or group string as
representing the same user as would be represented by an NFSv3 uid or
gid having the corresponding numeric value.
A server SHOULD reject such a numeric value if the security mechanism
is using Kerberos. That is, in such a scenario, the client will
already need to form "user@domain" strings. For any other security
mechanism, the server SHOULD accept such numeric values. As an
implementation note, the server could make such an acceptance be
configurable. If the server does not support numeric values or if it
is configured off, then it MUST return an NFS4ERR_BADOWNER error. If
the security mechanism is using Kerberos and the client attempts to
use the special form, then the server SHOULD return an
NFS4ERR_BADOWNER error when there is a valid translation for the user
or owner designated in this way. In that case, the client must use
the appropriate user@domain string and not the special form for
compatibility.
The client MUST always accept numeric values if the security
mechanism is not RPCSEC_GSS. A client can determine if a server
supports numeric identifiers by first attempting to provide a numeric
identifier. If this attempt is rejected with an NFS4ERR_BADOWNER
error, then the client should only use named identifiers of the form
"user@dns_domain".
The owner string "nobody" may be used to designate an anonymous user,
which will be associated with a file created by a security principal
that cannot be mapped through normal means to the owner attribute.
5.10. Character Case Attributes
With respect to the case_insensitive and case_preserving attributes,
case-insensitive comparisons of Unicode characters SHOULD use Unicode
Default Case Folding as defined in Chapter 3 of the Unicode Standard
[UNICODE] and MAY override that behavior for specific selected
characters with the case folding defined in the SpecialCasing.txt
[SPECIALCASING] file; see Section 3.13 of the Unicode Standard.
Haynes & Noveck Standards Track PAGE 53
RFC 7530 NFSv4 March 2015
The SpecialCasing.txt file replaces the Default Case Folding with
locale- and context-dependent case folding for specific situations.
An example of locale- and context-dependent case folding is that
LATIN CAPITAL LETTER I ("I", U+0049) is default case folded to LATIN
SMALL LETTER I ("i", U+0069). However, several languages (e.g.,
Turkish) treat an "I" character with a dot as a different letter than
an "I" character without a dot; therefore, in such languages, unless
an I is before a dot_above, the "I" (U+0049) character should be case
folded to a different character, LATIN SMALL LETTER DOTLESS I
(U+0131).
The [UNICODE] and [SPECIALCASING] references in this RFC are for
version 7.0.0 of the Unicode standard, as that was the latest version
of Unicode when this RFC was published. Implementations SHOULD
always use the latest version of Unicode
(<http://www.unicode.org/versions/latest/>).
6. Access Control Attributes
Access Control Lists (ACLs) are file attributes that specify fine-
grained access control. This section covers the "acl", "aclsupport",
and "mode" file attributes, and their interactions. Note that file
attributes may apply to any file system object.
6.1. Goals
ACLs and modes represent two well-established models for specifying
permissions. This section specifies requirements that attempt to
meet the following goals:
o If a server supports the mode attribute, it should provide
reasonable semantics to clients that only set and retrieve the
mode attribute.
o If a server supports ACL attributes, it should provide reasonable
semantics to clients that only set and retrieve those attributes.
o On servers that support the mode attribute, if ACL attributes have
never been set on an object, via inheritance or explicitly, the
behavior should be traditional UNIX-like behavior.
o On servers that support the mode attribute, if the ACL attributes
have been previously set on an object, either explicitly or via
inheritance:
* Setting only the mode attribute should effectively control the
traditional UNIX-like permissions of read, write, and execute
on owner, owner_group, and other.
Haynes & Noveck Standards Track PAGE 54
RFC 7530 NFSv4 March 2015
* Setting only the mode attribute should provide reasonable
security. For example, setting a mode of 000 should be enough
to ensure that future opens for read or write by any principal
fail, regardless of a previously existing or inherited ACL.
o When a mode attribute is set on an object, the ACL attributes may
need to be modified so as to not conflict with the new mode. In
such cases, it is desirable that the ACL keep as much information
as possible. This includes information about inheritance, AUDIT
and ALARM access control entries (ACEs), and permissions granted
and denied that do not conflict with the new mode.
6.2. File Attributes Discussion
Support for each of the ACL attributes is RECOMMENDED and not
required, since file systems accessed using NFSv4 might not
support ACLs.
6.2.1. Attribute 12: acl
The NFSv4.0 ACL attribute contains an array of ACEs that are
associated with the file system object. Although the client can read
and write the acl attribute, the server is responsible for using the
ACL to perform access control. The client can use the OPEN or ACCESS
operations to check access without modifying or reading data or
metadata.
The NFS ACE structure is defined as follows:
typedef uint32_t acetype4;
typedef uint32_t aceflag4;
typedef uint32_t acemask4;
struct nfsace4 {
acetype4 type;
aceflag4 flag;
acemask4 access_mask;
utf8str_mixed who;
};
To determine if a request succeeds, the server processes each nfsace4
entry in order. Only ACEs that have a "who" that matches the
requester are considered. Each ACE is processed until all of the
bits of the requester's access have been ALLOWED. Once a bit (see
below) has been ALLOWED by an ACCESS_ALLOWED_ACE, it is no longer
considered in the processing of later ACEs. If an ACCESS_DENIED_ACE
Haynes & Noveck Standards Track PAGE 55
RFC 7530 NFSv4 March 2015
is encountered where the requester's access still has unALLOWED bits
in common with the "access_mask" of the ACE, the request is denied.
When the ACL is fully processed, if there are bits in the requester's
mask that have not been ALLOWED or DENIED, access is denied.
Unlike the ALLOW and DENY ACE types, the ALARM and AUDIT ACE types do
not affect a requester's access and instead are for triggering events
as a result of a requester's access attempt. Therefore, AUDIT and
ALARM ACEs are processed only after processing ALLOW and DENY ACEs.
The NFSv4.0 ACL model is quite rich. Some server platforms may
provide access control functionality that goes beyond the UNIX-style
mode attribute but that is not as rich as the NFS ACL model. So that
users can take advantage of this more limited functionality, the
server may support the acl attributes by mapping between its ACL
model and the NFSv4.0 ACL model. Servers must ensure that the ACL
they actually store or enforce is at least as strict as the NFSv4 ACL
that was set. It is tempting to accomplish this by rejecting any ACL
that falls outside the small set that can be represented accurately.
However, such an approach can render ACLs unusable without special
client-side knowledge of the server's mapping, which defeats the
purpose of having a common NFSv4 ACL protocol. Therefore, servers
should accept every ACL that they can without compromising security.
To help accomplish this, servers may make a special exception, in the
case of unsupported permission bits, to the rule that bits not
ALLOWED or DENIED by an ACL must be denied. For example, a UNIX-
style server might choose to silently allow read attribute
permissions even though an ACL does not explicitly allow those
permissions. (An ACL that explicitly denies permission to read
attributes should still result in a denial.)
The situation is complicated by the fact that a server may have
multiple modules that enforce ACLs. For example, the enforcement for
NFSv4.0 access may be different from, but not weaker than, the
enforcement for local access, and both may be different from the
enforcement for access through other protocols such as Server Message
Block (SMB) [MS-SMB]. So it may be useful for a server to accept an
ACL even if not all of its modules are able to support it.
The guiding principle with regard to NFSv4 access is that the server
must not accept ACLs that give an appearance of more restricted
access to a file than what is actually enforced.
Haynes & Noveck Standards Track PAGE 56
RFC 7530 NFSv4 March 2015
6.2.1.1. ACE Type
The constants used for the type field (acetype4) are as follows:
const ACE4_ACCESS_ALLOWED_ACE_TYPE = 0x00000000;
const ACE4_ACCESS_DENIED_ACE_TYPE = 0x00000001;
const ACE4_SYSTEM_AUDIT_ACE_TYPE = 0x00000002;
const ACE4_SYSTEM_ALARM_ACE_TYPE = 0x00000003;
All four bit types are permitted in the acl attribute.
+------------------------------+--------------+---------------------+
| Value | Abbreviation | Description |
+------------------------------+--------------+---------------------+
| ACE4_ACCESS_ALLOWED_ACE_TYPE | ALLOW | Explicitly grants |
| | | the access defined |
| | | in acemask4 to the |
| | | file or directory. |
| | | |
| ACE4_ACCESS_DENIED_ACE_TYPE | DENY | Explicitly denies |
| | | the access defined |
| | | in acemask4 to the |
| | | file or directory. |
| | | |
| ACE4_SYSTEM_AUDIT_ACE_TYPE | AUDIT | LOG (in a system- |
| | | dependent way) any |
| | | access attempt to a |
| | | file or directory |
| | | that uses any of |
| | | the access methods |
| | | specified in |
| | | acemask4. |
| | | |
| ACE4_SYSTEM_ALARM_ACE_TYPE | ALARM | Generate a system |
| | | ALARM (system |
| | | dependent) when any |
| | | access attempt is |
| | | made to a file or |
| | | directory for the |
| | | access methods |
| | | specified in |
| | | acemask4. |
+------------------------------+--------------+---------------------+
The "Abbreviation" column denotes how the types will be referred to
throughout the rest of this section.
Haynes & Noveck Standards Track PAGE 57
RFC 7530 NFSv4 March 2015
6.2.1.2. Attribute 13: aclsupport
A server need not support all of the above ACE types. This attribute
indicates which ACE types are supported for the current file system.
The bitmask constants used to represent the above definitions within
the aclsupport attribute are as follows:
const ACL4_SUPPORT_ALLOW_ACL = 0x00000001;
const ACL4_SUPPORT_DENY_ACL = 0x00000002;
const ACL4_SUPPORT_AUDIT_ACL = 0x00000004;
const ACL4_SUPPORT_ALARM_ACL = 0x00000008;
Servers that support either the ALLOW or DENY ACE type SHOULD support
both ALLOW and DENY ACE types.
Clients should not attempt to set an ACE unless the server claims
support for that ACE type. If the server receives a request to set
an ACE that it cannot store, it MUST reject the request with
NFS4ERR_ATTRNOTSUPP. If the server receives a request to set an ACE
that it can store but cannot enforce, the server SHOULD reject the
request with NFS4ERR_ATTRNOTSUPP.
6.2.1.3. ACE Access Mask
The bitmask constants used for the access mask field are as follows:
const ACE4_READ_DATA = 0x00000001;
const ACE4_LIST_DIRECTORY = 0x00000001;
const ACE4_WRITE_DATA = 0x00000002;
const ACE4_ADD_FILE = 0x00000002;
const ACE4_APPEND_DATA = 0x00000004;
const ACE4_ADD_SUBDIRECTORY = 0x00000004;
const ACE4_READ_NAMED_ATTRS = 0x00000008;
const ACE4_WRITE_NAMED_ATTRS = 0x00000010;
const ACE4_EXECUTE = 0x00000020;
const ACE4_DELETE_CHILD = 0x00000040;
const ACE4_READ_ATTRIBUTES = 0x00000080;
const ACE4_WRITE_ATTRIBUTES = 0x00000100;
const ACE4_DELETE = 0x00010000;
const ACE4_READ_ACL = 0x00020000;
const ACE4_WRITE_ACL = 0x00040000;
const ACE4_WRITE_OWNER = 0x00080000;
const ACE4_SYNCHRONIZE = 0x00100000;
Haynes & Noveck Standards Track PAGE 58
RFC 7530 NFSv4 March 2015
Note that some masks have coincident values -- for example,
ACE4_READ_DATA and ACE4_LIST_DIRECTORY. The mask entries
ACE4_LIST_DIRECTORY, ACE4_ADD_FILE, and ACE4_ADD_SUBDIRECTORY are
intended to be used with directory objects, while ACE4_READ_DATA,
ACE4_WRITE_DATA, and ACE4_APPEND_DATA are intended to be used with
non-directory objects.
6.2.1.3.1. Discussion of Mask Attributes
ACE4_READ_DATA
Operation(s) affected:
READ
OPEN
Discussion:
Permission to read the data of the file.
Servers SHOULD allow a user the ability to read the data of the
file when only the ACE4_EXECUTE access mask bit is set.
ACE4_LIST_DIRECTORY
Operation(s) affected:
READDIR
Discussion:
Permission to list the contents of a directory.
ACE4_WRITE_DATA
Operation(s) affected:
WRITE
OPEN
SETATTR of size
Discussion:
Permission to modify a file's data.
Haynes & Noveck Standards Track PAGE 59
RFC 7530 NFSv4 March 2015
ACE4_ADD_FILE
Operation(s) affected:
CREATE
LINK
OPEN
RENAME
Discussion:
Permission to add a new file in a directory. The CREATE
operation is affected when nfs_ftype4 is NF4LNK, NF4BLK,
NF4CHR, NF4SOCK, or NF4FIFO. (NF4DIR is not listed because it
is covered by ACE4_ADD_SUBDIRECTORY.) OPEN is affected when
used to create a regular file. LINK and RENAME are always
affected.
ACE4_APPEND_DATA
Operation(s) affected:
WRITE
OPEN
SETATTR of size
Discussion:
The ability to modify a file's data, but only starting at EOF.
This allows for the notion of append-only files, by allowing
ACE4_APPEND_DATA and denying ACE4_WRITE_DATA to the same user
or group. If a file has an ACL such as the one described above
and a WRITE request is made for somewhere other than EOF, the
server SHOULD return NFS4ERR_ACCESS.
Haynes & Noveck Standards Track PAGE 60
RFC 7530 NFSv4 March 2015
ACE4_ADD_SUBDIRECTORY
Operation(s) affected:
CREATE
RENAME
Discussion:
Permission to create a subdirectory in a directory. The CREATE
operation is affected when nfs_ftype4 is NF4DIR. The RENAME
operation is always affected.
ACE4_READ_NAMED_ATTRS
Operation(s) affected:
OPENATTR
Discussion:
Permission to read the named attributes of a file or to look up
the named attributes directory. OPENATTR is affected when it
is not used to create a named attribute directory. This is
when 1) createdir is TRUE but a named attribute directory
already exists or 2) createdir is FALSE.
ACE4_WRITE_NAMED_ATTRS
Operation(s) affected:
OPENATTR
Discussion:
Permission to write the named attributes of a file or to create
a named attribute directory. OPENATTR is affected when it is
used to create a named attribute directory. This is when
createdir is TRUE and no named attribute directory exists. The
ability to check whether or not a named attribute directory
exists depends on the ability to look it up; therefore, users
also need the ACE4_READ_NAMED_ATTRS permission in order to
create a named attribute directory.
Haynes & Noveck Standards Track PAGE 61
RFC 7530 NFSv4 March 2015
ACE4_EXECUTE
Operation(s) affected:
READ
Discussion:
Permission to execute a file.
Servers SHOULD allow a user the ability to read the data of the
file when only the ACE4_EXECUTE access mask bit is set. This
is because there is no way to execute a file without reading
the contents. Though a server may treat ACE4_EXECUTE and
ACE4_READ_DATA bits identically when deciding to permit a READ
operation, it SHOULD still allow the two bits to be set
independently in ACLs and MUST distinguish between them when
replying to ACCESS operations. In particular, servers SHOULD
NOT silently turn on one of the two bits when the other is set,
as that would make it impossible for the client to correctly
enforce the distinction between read and execute permissions.
As an example, following a SETATTR of the following ACL:
nfsuser:ACE4_EXECUTE:ALLOW
A subsequent GETATTR of ACL for that file SHOULD return:
nfsuser:ACE4_EXECUTE:ALLOW
Rather than:
nfsuser:ACE4_EXECUTE/ACE4_READ_DATA:ALLOW
Haynes & Noveck Standards Track PAGE 62
RFC 7530 NFSv4 March 2015
ACE4_EXECUTE
Operation(s) affected:
LOOKUP
OPEN
REMOVE
RENAME
LINK
CREATE
Discussion:
Permission to traverse/search a directory.
ACE4_DELETE_CHILD
Operation(s) affected:
REMOVE
RENAME
Discussion:
Permission to delete a file or directory within a directory.
See Section 6.2.1.3.2 for information on how ACE4_DELETE and
ACE4_DELETE_CHILD interact.
Haynes & Noveck Standards Track PAGE 63
RFC 7530 NFSv4 March 2015
ACE4_READ_ATTRIBUTES
Operation(s) affected:
GETATTR of file system object attributes
VERIFY
NVERIFY
READDIR
Discussion:
The ability to read basic attributes (non-ACLs) of a file.
On a UNIX system, basic attributes can be thought of as the
stat-level attributes. Allowing this access mask bit would
mean the entity can execute "ls -l" and stat. If a READDIR
operation requests attributes, this mask must be allowed for
the READDIR to succeed.
ACE4_WRITE_ATTRIBUTES
Operation(s) affected:
SETATTR of time_access_set, time_backup, time_create,
time_modify_set, mimetype, hidden, and system
Discussion:
Permission to change the times associated with a file or
directory to an arbitrary value. Also, permission to change
the mimetype, hidden and system attributes. A user having
ACE4_WRITE_DATA or ACE4_WRITE_ATTRIBUTES will be allowed to set
the times associated with a file to the current server time.
ACE4_DELETE
Operation(s) affected:
REMOVE
Discussion:
Permission to delete the file or directory. See
Section 6.2.1.3.2 for information on ACE4_DELETE and
ACE4_DELETE_CHILD interact.
Haynes & Noveck Standards Track PAGE 64
RFC 7530 NFSv4 March 2015
ACE4_READ_ACL
Operation(s) affected:
GETATTR of acl
NVERIFY
VERIFY
Discussion:
Permission to read the ACL.
ACE4_WRITE_ACL
Operation(s) affected:
SETATTR of acl and mode
Discussion:
Permission to write the acl and mode attributes.
ACE4_WRITE_OWNER
Operation(s) affected:
SETATTR of owner and owner_group
Discussion:
Permission to write the owner and owner_group attributes. On
UNIX systems, this is the ability to execute chown() and
chgrp().
Haynes & Noveck Standards Track PAGE 65
RFC 7530 NFSv4 March 2015
ACE4_SYNCHRONIZE
Operation(s) affected:
NONE
Discussion:
Permission to use the file object as a synchronization
primitive for interprocess communication. This permission is
not enforced or interpreted by the NFSv4.0 server on behalf of
the client.
Typically, the ACE4_SYNCHRONIZE permission is only meaningful
on local file systems, i.e., file systems not accessed via
NFSv4.0. The reason that the permission bit exists is that
some operating environments, such as Windows, use
ACE4_SYNCHRONIZE.
For example, if a client copies a file that has
ACE4_SYNCHRONIZE set from a local file system to an NFSv4.0
server, and then later copies the file from the NFSv4.0 server
to a local file system, it is likely that if ACE4_SYNCHRONIZE
was set in the original file, the client will want it set in
the second copy. The first copy will not have the permission
set unless the NFSv4.0 server has the means to set the
ACE4_SYNCHRONIZE bit. The second copy will not have the
permission set unless the NFSv4.0 server has the means to
retrieve the ACE4_SYNCHRONIZE bit.
Server implementations need not provide the granularity of control
that is implied by this list of masks. For example, POSIX-based
systems might not distinguish ACE4_APPEND_DATA (the ability to append
to a file) from ACE4_WRITE_DATA (the ability to modify existing
contents); both masks would be tied to a single "write" permission.
When such a server returns attributes to the client, it would show
both ACE4_APPEND_DATA and ACE4_WRITE_DATA if and only if the write
permission is enabled.
If a server receives a SETATTR request that it cannot accurately
implement, it should err in the direction of more restricted access,
except in the previously discussed cases of execute and read. For
example, suppose a server cannot distinguish overwriting data from
appending new data, as described in the previous paragraph. If a
client submits an ALLOW ACE where ACE4_APPEND_DATA is set but
ACE4_WRITE_DATA is not (or vice versa), the server should either turn
off ACE4_APPEND_DATA or reject the request with NFS4ERR_ATTRNOTSUPP.
Haynes & Noveck Standards Track PAGE 66
RFC 7530 NFSv4 March 2015
6.2.1.3.2. ACE4_DELETE versus ACE4_DELETE_CHILD
Two access mask bits govern the ability to delete a directory entry:
ACE4_DELETE on the object itself (the "target") and ACE4_DELETE_CHILD
on the containing directory (the "parent").
Many systems also take the "sticky bit" (MODE4_SVTX) on a directory
to allow unlink only to a user that owns either the target or the
parent; on some such systems, the decision also depends on whether
the target is writable.
Servers SHOULD allow unlink if either ACE4_DELETE is permitted on the
target or ACE4_DELETE_CHILD is permitted on the parent. (Note that
this is true even if the parent or target explicitly denies the other
of these permissions.)
If the ACLs in question neither explicitly ALLOW nor DENY either of
the above, and if MODE4_SVTX is not set on the parent, then the
server SHOULD allow the removal if and only if ACE4_ADD_FILE is
permitted. In the case where MODE4_SVTX is set, the server may also
require the remover to own either the parent or the target, or may
require the target to be writable.
This allows servers to support something close to traditional
UNIX-like semantics, with ACE4_ADD_FILE taking the place of the
write bit.
6.2.1.4. ACE flag
The bitmask constants used for the flag field are as follows:
const ACE4_FILE_INHERIT_ACE = 0x00000001;
const ACE4_DIRECTORY_INHERIT_ACE = 0x00000002;
const ACE4_NO_PROPAGATE_INHERIT_ACE = 0x00000004;
const ACE4_INHERIT_ONLY_ACE = 0x00000008;
const ACE4_SUCCESSFUL_ACCESS_ACE_FLAG = 0x00000010;
const ACE4_FAILED_ACCESS_ACE_FLAG = 0x00000020;
const ACE4_IDENTIFIER_GROUP = 0x00000040;
A server need not support any of these flags. If the server supports
flags that are similar to, but not exactly the same as, these flags,
the implementation may define a mapping between the protocol-defined
flags and the implementation-defined flags.
For example, suppose a client tries to set an ACE with
ACE4_FILE_INHERIT_ACE set but not ACE4_DIRECTORY_INHERIT_ACE. If the
server does not support any form of ACL inheritance, the server
should reject the request with NFS4ERR_ATTRNOTSUPP. If the server
Haynes & Noveck Standards Track PAGE 67
RFC 7530 NFSv4 March 2015
supports a single "inherit ACE" flag that applies to both files and
directories, the server may reject the request (i.e., requiring the
client to set both the file and directory inheritance flags). The
server may also accept the request and silently turn on the
ACE4_DIRECTORY_INHERIT_ACE flag.
6.2.1.4.1. Discussion of Flag Bits
ACE4_FILE_INHERIT_ACE
Any non-directory file in any subdirectory will get this ACE
inherited.
ACE4_DIRECTORY_INHERIT_ACE
Can be placed on a directory and indicates that this ACE should be
added to each new directory created.
If this flag is set in an ACE in an ACL attribute to be set on a
non-directory file system object, the operation attempting to set
the ACL SHOULD fail with NFS4ERR_ATTRNOTSUPP.
ACE4_INHERIT_ONLY_ACE
Can be placed on a directory but does not apply to the directory;
ALLOW and DENY ACEs with this bit set do not affect access to the
directory, and AUDIT and ALARM ACEs with this bit set do not
trigger log or alarm events. Such ACEs only take effect once they
are applied (with this bit cleared) to newly created files and
directories as specified by the above two flags.
If this flag is present on an ACE, but neither
ACE4_DIRECTORY_INHERIT_ACE nor ACE4_FILE_INHERIT_ACE is present,
then an operation attempting to set such an attribute SHOULD fail
with NFS4ERR_ATTRNOTSUPP.
ACE4_NO_PROPAGATE_INHERIT_ACE
Can be placed on a directory. This flag tells the server that
inheritance of this ACE should stop at newly created child
directories.
ACE4_SUCCESSFUL_ACCESS_ACE_FLAG
ACE4_FAILED_ACCESS_ACE_FLAG
The ACE4_SUCCESSFUL_ACCESS_ACE_FLAG (SUCCESS) and
ACE4_FAILED_ACCESS_ACE_FLAG (FAILED) flag bits may be set only on
ACE4_SYSTEM_AUDIT_ACE_TYPE (AUDIT) and ACE4_SYSTEM_ALARM_ACE_TYPE
(ALARM) ACE types. If, during the processing of the file's ACL,
the server encounters an AUDIT or ALARM ACE that matches the
principal attempting the OPEN, the server notes that fact and
notes the presence, if any, of the SUCCESS and FAILED flags
encountered in the AUDIT or ALARM ACE. Once the server completes
the ACL processing, it then notes if the operation succeeded or
Haynes & Noveck Standards Track PAGE 68
RFC 7530 NFSv4 March 2015
failed. If the operation succeeded, and if the SUCCESS flag was
set for a matching AUDIT or ALARM ACE, then the appropriate AUDIT
or ALARM event occurs. If the operation failed, and if the FAILED
flag was set for the matching AUDIT or ALARM ACE, then the
appropriate AUDIT or ALARM event occurs. Either or both of the
SUCCESS or FAILED can be set, but if neither is set, the AUDIT or
ALARM ACE is not useful.
The previously described processing applies to ACCESS operations
even when they return NFS4_OK. For the purposes of AUDIT and
ALARM, we consider an ACCESS operation to be a "failure" if it
fails to return a bit that was requested and supported.
ACE4_IDENTIFIER_GROUP
Indicates that the "who" refers to a GROUP as defined under UNIX
or a GROUP ACCOUNT as defined under Windows. Clients and servers
MUST ignore the ACE4_IDENTIFIER_GROUP flag on ACEs with a who
value equal to one of the special identifiers outlined in
Section 6.2.1.5.
6.2.1.5. ACE Who
The who field of an ACE is an identifier that specifies the principal
or principals to whom the ACE applies. It may refer to a user or a
group, with the flag bit ACE4_IDENTIFIER_GROUP specifying which.
There are several special identifiers that need to be understood
universally, rather than in the context of a particular DNS domain.
Some of these identifiers cannot be understood when an NFS client
accesses the server but have meaning when a local process accesses
the file. The ability to display and modify these permissions is
permitted over NFS, even if none of the access methods on the server
understand the identifiers.
Haynes & Noveck Standards Track PAGE 69
RFC 7530 NFSv4 March 2015
+---------------+---------------------------------------------------+
| Who | Description |
+---------------+---------------------------------------------------+
| OWNER | The owner of the file. |
| GROUP | The group associated with the file. |
| EVERYONE | The world, including the owner and owning group. |
| INTERACTIVE | Accessed from an interactive terminal. |
| NETWORK | Accessed via the network. |
| DIALUP | Accessed as a dialup user to the server. |
| BATCH | Accessed from a batch job. |
| ANONYMOUS | Accessed without any authentication. |
| AUTHENTICATED | Any authenticated user (opposite of ANONYMOUS). |
| SERVICE | Access from a system service. |
+---------------+---------------------------------------------------+
Table 5: Special Identifiers
To avoid conflict, these special identifiers are distinguished by an
appended "@" and should appear in the form "xxxx@" (with no domain
name after the "@") -- for example, ANONYMOUS@.
The ACE4_IDENTIFIER_GROUP flag MUST be ignored on entries with these
special identifiers. When encoding entries with these special
identifiers, the ACE4_IDENTIFIER_GROUP flag SHOULD be set to zero.
6.2.1.5.1. Discussion of EVERYONE@
It is important to note that "EVERYONE@" is not equivalent to the
UNIX "other" entity. This is because, by definition, UNIX "other"
does not include the owner or owning group of a file. "EVERYONE@"
means literally everyone, including the owner or owning group.
6.2.2. Attribute 33: mode
The NFSv4.0 mode attribute is based on the UNIX mode bits. The
following bits are defined:
const MODE4_SUID = 0x800; /* set user id on execution */
const MODE4_SGID = 0x400; /* set group id on execution */
const MODE4_SVTX = 0x200; /* save text even after use */
const MODE4_RUSR = 0x100; /* read permission: owner */
const MODE4_WUSR = 0x080; /* write permission: owner */
const MODE4_XUSR = 0x040; /* execute permission: owner */
const MODE4_RGRP = 0x020; /* read permission: group */
const MODE4_WGRP = 0x010; /* write permission: group */
const MODE4_XGRP = 0x008; /* execute permission: group */
Haynes & Noveck Standards Track PAGE 70
RFC 7530 NFSv4 March 2015
const MODE4_ROTH = 0x004; /* read permission: other */
const MODE4_WOTH = 0x002; /* write permission: other */
const MODE4_XOTH = 0x001; /* execute permission: other */
Bits MODE4_RUSR, MODE4_WUSR, and MODE4_XUSR apply to the principal
identified in the owner attribute. Bits MODE4_RGRP, MODE4_WGRP, and
MODE4_XGRP apply to principals identified in the owner_group
attribute but who are not identified in the owner attribute. Bits
MODE4_ROTH, MODE4_WOTH, and MODE4_XOTH apply to any principal that
does not match that in the owner attribute and does not have a group
matching that of the owner_group attribute.
Bits within the mode other than those specified above are not defined
by this protocol. A server MUST NOT return bits other than those
defined above in a GETATTR or READDIR operation, and it MUST return
NFS4ERR_INVAL if bits other than those defined above are set in a
SETATTR, CREATE, OPEN, VERIFY, or NVERIFY operation.
6.3. Common Methods
The requirements in this section will be referred to in future
sections, especially Section 6.4.
6.3.1. Interpreting an ACL
6.3.1.1. Server Considerations
The server uses the algorithm described in Section 6.2.1 to determine
whether an ACL allows access to an object. However, the ACL may not
be the sole determiner of access. For example:
o In the case of a file system exported as read-only, the server may
deny write permissions even though an object's ACL grants it.
o Server implementations MAY grant ACE4_WRITE_ACL and ACE4_READ_ACL
permissions to prevent a situation from arising in which there is
no valid way to ever modify the ACL.
o All servers will allow a user the ability to read the data of the
file when only the execute permission is granted (i.e., if the ACL
denies the user ACE4_READ_DATA access and allows the user
ACE4_EXECUTE, the server will allow the user to read the data of
the file).
Haynes & Noveck Standards Track PAGE 71
RFC 7530 NFSv4 March 2015
o Many servers have the notion of owner-override, in which the owner
of the object is allowed to override accesses that are denied by
the ACL. This may be helpful, for example, to allow users
continued access to open files on which the permissions have
changed.
o Many servers have the notion of a "superuser" that has privileges
beyond an ordinary user. The superuser may be able to read or
write data or metadata in ways that would not be permitted by
the ACL.
6.3.1.2. Client Considerations
Clients SHOULD NOT do their own access checks based on their
interpretation of the ACL but rather use the OPEN and ACCESS
operations to do access checks. This allows the client to act on the
results of having the server determine whether or not access should
be granted based on its interpretation of the ACL.
Clients must be aware of situations in which an object's ACL will
define a certain access even though the server will not have adequate
information to enforce it. For example, the server has no way of
determining whether a particular OPEN reflects a user's open for read
access or is done as part of executing the file in question. In such
situations, the client needs to do its part in the enforcement of
access as defined by the ACL. To do this, the client will send the
appropriate ACCESS operation (or use a cached previous determination)
prior to servicing the request of the user or application in order to
determine whether the user or application should be granted the
access requested. For examples in which the ACL may define accesses
that the server does not enforce, see Section 6.3.1.1.
6.3.2. Computing a mode Attribute from an ACL
The following method can be used to calculate the MODE4_R*, MODE4_W*,
and MODE4_X* bits of a mode attribute, based upon an ACL.
First, for each of the special identifiers OWNER@, GROUP@, and
EVERYONE@, evaluate the ACL in order, considering only ALLOW and DENY
ACEs for the identifier EVERYONE@ and for the identifier under
consideration. The result of the evaluation will be an NFSv4 ACL
mask showing exactly which bits are permitted to that identifier.
Haynes & Noveck Standards Track PAGE 72
RFC 7530 NFSv4 March 2015
Then translate the calculated mask for OWNER@, GROUP@, and EVERYONE@
into mode bits for the user, group, and other, respectively, as
follows:
1. Set the read bit (MODE4_RUSR, MODE4_RGRP, or MODE4_ROTH) if and
only if ACE4_READ_DATA is set in the corresponding mask.
2. Set the write bit (MODE4_WUSR, MODE4_WGRP, or MODE4_WOTH) if and
only if ACE4_WRITE_DATA and ACE4_APPEND_DATA are both set in the
corresponding mask.
3. Set the execute bit (MODE4_XUSR, MODE4_XGRP, or MODE4_XOTH), if
and only if ACE4_EXECUTE is set in the corresponding mask.
6.3.2.1. Discussion
Some server implementations also add bits permitted to named users
and groups to the group bits (MODE4_RGRP, MODE4_WGRP, and
MODE4_XGRP).
Implementations are discouraged from doing this, because it has been
found to cause confusion for users who see members of a file's group
denied access that the mode bits appear to allow. (The presence of
DENY ACEs may also lead to such behavior, but DENY ACEs are expected
to be more rarely used.)
The same user confusion seen when fetching the mode also results if
setting the mode does not effectively control permissions for the
owner, group, and other users; this motivates some of the
requirements that follow.
6.4. Requirements
The server that supports both mode and ACL must take care to
synchronize the MODE4_*USR, MODE4_*GRP, and MODE4_*OTH bits with the
ACEs that have respective who fields of "OWNER@", "GROUP@", and
"EVERYONE@" so that the client can see that semantically equivalent
access permissions exist whether the client asks for just the ACL or
any of the owner, owner_group, and mode attributes.
Many requirements refer to Section 6.3.2, but note that the methods
have behaviors specified with "SHOULD". This is intentional, to
avoid invalidating existing implementations that compute the mode
according to the withdrawn POSIX ACL draft ([P1003.1e]), rather than
by actual permissions on owner, group, and other.
Haynes & Noveck Standards Track PAGE 73
RFC 7530 NFSv4 March 2015
6.4.1. Setting the mode and/or ACL Attributes
6.4.1.1. Setting mode and Not ACL
When any of the nine low-order mode bits are changed because the mode
attribute was set, and no ACL attribute is explicitly set, the acl
attribute must be modified in accordance with the updated value of
those bits. This must happen even if the value of the low-order bits
is the same after the mode is set as before.
Note that any AUDIT or ALARM ACEs are unaffected by changes to the
mode.
In cases in which the permissions bits are subject to change, the acl
attribute MUST be modified such that the mode computed via the method
described in Section 6.3.2 yields the low-order nine bits (MODE4_R*,
MODE4_W*, MODE4_X*) of the mode attribute as modified by the change
attribute. The ACL attributes SHOULD also be modified such that:
1. If MODE4_RGRP is not set, entities explicitly listed in the ACL
other than OWNER@ and EVERYONE@ SHOULD NOT be granted
ACE4_READ_DATA.
2. If MODE4_WGRP is not set, entities explicitly listed in the ACL
other than OWNER@ and EVERYONE@ SHOULD NOT be granted
ACE4_WRITE_DATA or ACE4_APPEND_DATA.
3. If MODE4_XGRP is not set, entities explicitly listed in the ACL
other than OWNER@ and EVERYONE@ SHOULD NOT be granted
ACE4_EXECUTE.
Access mask bits other than those listed above, appearing in ALLOW
ACEs, MAY also be disabled.
Note that ACEs with the flag ACE4_INHERIT_ONLY_ACE set do not affect
the permissions of the ACL itself, nor do ACEs of the types AUDIT and
ALARM. As such, it is desirable to leave these ACEs unmodified when
modifying the ACL attributes.
Also note that the requirement may be met by discarding the acl in
favor of an ACL that represents the mode and only the mode. This is
permitted, but it is preferable for a server to preserve as much of
the ACL as possible without violating the above requirements.
Discarding the ACL makes it effectively impossible for a file created
with a mode attribute to inherit an ACL (see Section 6.4.3).
Haynes & Noveck Standards Track PAGE 74
RFC 7530 NFSv4 March 2015
6.4.1.2. Setting ACL and Not mode
When setting the acl and not setting the mode attribute, the
permission bits of the mode need to be derived from the ACL. In this
case, the ACL attribute SHOULD be set as given. The nine low-order
bits of the mode attribute (MODE4_R*, MODE4_W*, MODE4_X*) MUST be
modified to match the result of the method described in
Section 6.3.2. The three high-order bits of the mode (MODE4_SUID,
MODE4_SGID, MODE4_SVTX) SHOULD remain unchanged.
6.4.1.3. Setting Both ACL and mode
When setting both the mode and the acl attribute in the same
operation, the attributes MUST be applied in this order: mode, then
ACL. The mode-related attribute is set as given, then the ACL
attribute is set as given, possibly changing the final mode, as
described above in Section 6.4.1.2.
6.4.2. Retrieving the mode and/or ACL Attributes
This section applies only to servers that support both the mode and
ACL attributes.
Some server implementations may have a concept of "objects without
ACLs", meaning that all permissions are granted and denied according
to the mode attribute, and that no ACL attribute is stored for that
object. If an ACL attribute is requested of such a server, the
server SHOULD return an ACL that does not conflict with the mode;
that is to say, the ACL returned SHOULD represent the nine low-order
bits of the mode attribute (MODE4_R*, MODE4_W*, MODE4_X*) as
described in Section 6.3.2.
For other server implementations, the ACL attribute is always present
for every object. Such servers SHOULD store at least the three
high-order bits of the mode attribute (MODE4_SUID, MODE4_SGID,
MODE4_SVTX). The server SHOULD return a mode attribute if one is
requested, and the low-order nine bits of the mode (MODE4_R*,
MODE4_W*, MODE4_X*) MUST match the result of applying the method in
Section 6.3.2 to the ACL attribute.
6.4.3. Creating New Objects
If a server supports any ACL attributes, it may use the ACL
attributes on the parent directory to compute an initial ACL
attribute for a newly created object. This will be referred to as
the inherited ACL within this section. The act of adding one or more
Haynes & Noveck Standards Track PAGE 75
RFC 7530 NFSv4 March 2015
ACEs to the inherited ACL that are based upon ACEs in the parent
directory's ACL will be referred to as inheriting an ACE within this
section.
In the presence or absence of the mode and ACL attributes, the
behavior of CREATE and OPEN SHOULD be:
1. If just the mode is given in the call:
In this case, inheritance SHOULD take place, but the mode MUST be
applied to the inherited ACL as described in Section 6.4.1.1,
thereby modifying the ACL.
2. If just the ACL is given in the call:
In this case, inheritance SHOULD NOT take place, and the ACL as
defined in the CREATE or OPEN will be set without modification,
and the mode modified as in Section 6.4.1.2.
3. If both mode and ACL are given in the call:
In this case, inheritance SHOULD NOT take place, and both
attributes will be set as described in Section 6.4.1.3.
4. If neither mode nor ACL is given in the call:
In the case where an object is being created without any initial
attributes at all, e.g., an OPEN operation with an opentype4 of
OPEN4_CREATE and a createmode4 of EXCLUSIVE4, inheritance SHOULD
NOT take place. Instead, the server SHOULD set permissions to
deny all access to the newly created object. It is expected that
the appropriate client will set the desired attributes in a
subsequent SETATTR operation, and the server SHOULD allow that
operation to succeed, regardless of what permissions the object
is created with. For example, an empty ACL denies all
permissions, but the server should allow the owner's SETATTR to
succeed even though WRITE_ACL is implicitly denied.
In other cases, inheritance SHOULD take place, and no
modifications to the ACL will happen. The mode attribute, if
supported, MUST be as computed via the method described in
Section 6.3.2, with the MODE4_SUID, MODE4_SGID, and MODE4_SVTX
bits clear. If no inheritable ACEs exist on the parent
directory, the rules for creating acl attributes are
implementation defined.
Haynes & Noveck Standards Track PAGE 76
RFC 7530 NFSv4 March 2015
6.4.3.1. The Inherited ACL
If the object being created is not a directory, the inherited ACL
SHOULD NOT inherit ACEs from the parent directory ACL unless the
ACE4_FILE_INHERIT_FLAG is set.
If the object being created is a directory, the inherited ACL should
inherit all inheritable ACEs from the parent directory, i.e., those
that have the ACE4_FILE_INHERIT_ACE or ACE4_DIRECTORY_INHERIT_ACE
flag set. If the inheritable ACE has ACE4_FILE_INHERIT_ACE set, but
ACE4_DIRECTORY_INHERIT_ACE is clear, the inherited ACE on the newly
created directory MUST have the ACE4_INHERIT_ONLY_ACE flag set to
prevent the directory from being affected by ACEs meant for
non-directories.
When a new directory is created, the server MAY split any inherited
ACE that is both inheritable and effective (in other words, that has
neither ACE4_INHERIT_ONLY_ACE nor ACE4_NO_PROPAGATE_INHERIT_ACE set)
into two ACEs -- one with no inheritance flags, and one with
ACE4_INHERIT_ONLY_ACE set. This makes it simpler to modify the
effective permissions on the directory without modifying the ACE that
is to be inherited to the new directory's children.
7. NFS Server Namespace
7.1. Server Exports
On a UNIX server, the namespace describes all the files reachable by
pathnames under the root directory or "/". On a Windows server, the
namespace constitutes all the files on disks named by mapped disk
letters. NFS server administrators rarely make the entire server's
file system namespace available to NFS clients. More often, portions
of the namespace are made available via an "export" feature. In
previous versions of the NFS protocol, the root filehandle for each
export is obtained through the MOUNT protocol; the client sends a
string that identifies an object in the exported namespace, and the
server returns the root filehandle for it. The MOUNT protocol
supports an EXPORTS procedure that will enumerate the server's
exports.
7.2. Browsing Exports
The NFSv4 protocol provides a root filehandle that clients can use to
obtain filehandles for these exports via a multi-component LOOKUP. A
common user experience is to use a graphical user interface (perhaps
a file "Open" dialog window) to find a file via progressive browsing
Haynes & Noveck Standards Track PAGE 77
RFC 7530 NFSv4 March 2015
through a directory tree. The client must be able to move from one
export to another export via single-component, progressive LOOKUP
operations.
This style of browsing is not well supported by the NFSv2 and NFSv3
protocols. The client expects all LOOKUP operations to remain within
a single-server file system. For example, the device attribute will
not change. This prevents a client from taking namespace paths that
span exports.
An automounter on the client can obtain a snapshot of the server's
namespace using the EXPORTS procedure of the MOUNT protocol. If it
understands the server's pathname syntax, it can create an image of
the server's namespace on the client. The parts of the namespace
that are not exported by the server are filled in with a "pseudo-file
system" that allows the user to browse from one mounted file system
to another. There is a drawback to this representation of the
server's namespace on the client: it is static. If the server
administrator adds a new export, the client will be unaware of it.
7.3. Server Pseudo-File System
NFSv4 servers avoid this namespace inconsistency by presenting all
the exports within the framework of a single-server namespace. An
NFSv4 client uses LOOKUP and READDIR operations to browse seamlessly
from one export to another. Portions of the server namespace that
are not exported are bridged via a "pseudo-file system" that provides
a view of exported directories only. A pseudo-file system has a
unique fsid and behaves like a normal, read-only file system.
Based on the construction of the server's namespace, it is possible
that multiple pseudo-file systems may exist. For example:
/a pseudo-file system
/a/b real file system
/a/b/c pseudo-file system
/a/b/c/d real file system
Each of the pseudo-file systems are considered separate entities and
therefore will have a unique fsid.
Haynes & Noveck Standards Track PAGE 78
RFC 7530 NFSv4 March 2015
7.4. Multiple Roots
The DOS and Windows operating environments are sometimes described as
having "multiple roots". File systems are commonly represented as
disk letters. MacOS represents file systems as top-level names.
NFSv4 servers for these platforms can construct a pseudo-file system
above these root names so that disk letters or volume names are
simply directory names in the pseudo-root.
7.5. Filehandle Volatility
The nature of the server's pseudo-file system is that it is a logical
representation of file system(s) available from the server.
Therefore, the pseudo-file system is most likely constructed
dynamically when the server is first instantiated. It is expected
that the pseudo-file system may not have an on-disk counterpart from
which persistent filehandles could be constructed. Even though it is
preferable that the server provide persistent filehandles for the
pseudo-file system, the NFS client should expect that pseudo-file
system filehandles are volatile. This can be confirmed by checking
the associated "fh_expire_type" attribute for those filehandles in
question. If the filehandles are volatile, the NFS client must be
prepared to recover a filehandle value (e.g., with a multi-component
LOOKUP) when receiving an error of NFS4ERR_FHEXPIRED.
7.6. Exported Root
If the server's root file system is exported, one might conclude that
a pseudo-file system is not needed. This would be wrong. Assume the
following file systems on a server:
/ disk1 (exported)
/a disk2 (not exported)
/a/b disk3 (exported)
Because disk2 is not exported, disk3 cannot be reached with simple
LOOKUPs. The server must bridge the gap with a pseudo-file system.
7.7. Mount Point Crossing
The server file system environment may be constructed in such a way
that one file system contains a directory that is 'covered' or
mounted upon by a second file system. For example:
/a/b (file system 1)
/a/b/c/d (file system 2)
Haynes & Noveck Standards Track PAGE 79
RFC 7530 NFSv4 March 2015
The pseudo-file system for this server may be constructed to
look like:
/ (placeholder/not exported)
/a/b (file system 1)
/a/b/c/d (file system 2)
It is the server's responsibility to present the pseudo-file system
that is complete to the client. If the client sends a LOOKUP request
for the path "/a/b/c/d", the server's response is the filehandle of
the file system "/a/b/c/d". In previous versions of the NFS
protocol, the server would respond with the filehandle of directory
"/a/b/c/d" within the file system "/a/b".
The NFS client will be able to determine if it crosses a server mount
point by a change in the value of the "fsid" attribute.
7.8. Security Policy and Namespace Presentation
Because NFSv4 clients possess the ability to change the security
mechanisms used, after determining what is allowed, by using SECINFO
the server SHOULD NOT present a different view of the namespace based
on the security mechanism being used by a client. Instead, it should
present a consistent view and return NFS4ERR_WRONGSEC if an attempt
is made to access data with an inappropriate security mechanism.
If security considerations make it necessary to hide the existence of
a particular file system, as opposed to all of the data within it,
the server can apply the security policy of a shared resource in the
server's namespace to components of the resource's ancestors. For
example:
/ (placeholder/not exported)
/a/b (file system 1)
/a/b/MySecretProject (file system 2)
The /a/b/MySecretProject directory is a real file system and is the
shared resource. Suppose the security policy for /a/b/
MySecretProject is Kerberos with integrity and it is desired to limit
knowledge of the existence of this file system. In this case, the
server should apply the same security policy to /a/b. This allows
for knowledge of the existence of a file system to be secured when
desirable.
For the case of the use of multiple, disjoint security mechanisms in
the server's resources, applying that sort of policy would result in
the higher-level file system not being accessible using any security
Haynes & Noveck Standards Track PAGE 80
RFC 7530 NFSv4 March 2015
flavor. Therefore, that sort of configuration is not compatible with
hiding the existence (as opposed to the contents) from clients using
multiple disjoint sets of security flavors.
In other circumstances, a desirable policy is for the security of a
particular object in the server's namespace to include the union of
all security mechanisms of all direct descendants. A common and
convenient practice, unless strong security requirements dictate
otherwise, is to make the entire pseudo-file system accessible by all
of the valid security mechanisms.
Where there is concern about the security of data on the network,
clients should use strong security mechanisms to access the
pseudo-file system in order to prevent man-in-the-middle attacks.
8. Multi-Server Namespace
NFSv4 supports attributes that allow a namespace to extend beyond the
boundaries of a single server. It is RECOMMENDED that clients and
servers support construction of such multi-server namespaces. Use of
such multi-server namespaces is optional, however, and for many
purposes, single-server namespaces are perfectly acceptable. Use of
multi-server namespaces can provide many advantages, however, by
separating a file system's logical position in a namespace from the
(possibly changing) logistical and administrative considerations that
result in particular file systems being located on particular
servers.
8.1. Location Attributes
NFSv4 contains RECOMMENDED attributes that allow file systems on one
server to be associated with one or more instances of that file
system on other servers. These attributes specify such file system
instances by specifying a server address target (as either a DNS name
representing one or more IP addresses, or a literal IP address),
together with the path of that file system within the associated
single-server namespace.
The fs_locations RECOMMENDED attribute allows specification of the
file system locations where the data corresponding to a given file
system may be found.
8.2. File System Presence or Absence
A given location in an NFSv4 namespace (typically but not necessarily
a multi-server namespace) can have a number of file system instance
locations associated with it via the fs_locations attribute. There
may also be an actual current file system at that location,
Haynes & Noveck Standards Track PAGE 81
RFC 7530 NFSv4 March 2015
accessible via normal namespace operations (e.g., LOOKUP). In this
case, the file system is said to be "present" at that position in the
namespace, and clients will typically use it, reserving use of
additional locations specified via the location-related attributes to
situations in which the principal location is no longer available.
When there is no actual file system at the namespace location in
question, the file system is said to be "absent". An absent file
system contains no files or directories other than the root. Any
reference to it, except to access a small set of attributes useful in
determining alternative locations, will result in an error,
NFS4ERR_MOVED. Note that if the server ever returns the error
NFS4ERR_MOVED, it MUST support the fs_locations attribute.
While the error name suggests that we have a case of a file system
that once was present, and has only become absent later, this is only
one possibility. A position in the namespace may be permanently
absent with the set of file system(s) designated by the location
attributes being the only realization. The name NFS4ERR_MOVED
reflects an earlier, more limited conception of its function, but
this error will be returned whenever the referenced file system is
absent, whether it has moved or simply never existed.
Except in the case of GETATTR-type operations (to be discussed
later), when the current filehandle at the start of an operation is
within an absent file system, that operation is not performed and the
error NFS4ERR_MOVED is returned, to indicate that the file system is
absent on the current server.
Because a GETFH cannot succeed if the current filehandle is within an
absent file system, filehandles within an absent file system cannot
be transferred to the client. When a client does have filehandles
within an absent file system, it is the result of obtaining them when
the file system was present, and having the file system become absent
subsequently.
It should be noted that because the check for the current filehandle
being within an absent file system happens at the start of every
operation, operations that change the current filehandle so that it
is within an absent file system will not result in an error. This
allows such combinations as PUTFH-GETATTR and LOOKUP-GETATTR to be
used to get attribute information, particularly location attribute
information, as discussed below.
Haynes & Noveck Standards Track PAGE 82
RFC 7530 NFSv4 March 2015
8.3. Getting Attributes for an Absent File System
When a file system is absent, most attributes are not available, but
it is necessary to allow the client access to the small set of
attributes that are available, and most particularly that which gives
information about the correct current locations for this file system,
fs_locations.
8.3.1. GETATTR within an Absent File System
As mentioned above, an exception is made for GETATTR in that
attributes may be obtained for a filehandle within an absent file
system. This exception only applies if the attribute mask contains
at least the fs_locations attribute bit, which indicates that the
client is interested in a result regarding an absent file system. If
it is not requested, GETATTR will result in an NFS4ERR_MOVED error.
When a GETATTR is done on an absent file system, the set of supported
attributes is very limited. Many attributes, including those that
are normally REQUIRED, will not be available on an absent file
system. In addition to the fs_locations attribute, the following
attributes SHOULD be available on absent file systems. In the case
of RECOMMENDED attributes, they should be available at least to the
same degree that they are available on present file systems.
fsid: This attribute should be provided so that the client can
determine file system boundaries, including, in particular, the
boundary between present and absent file systems. This value must
be different from any other fsid on the current server and need
have no particular relationship to fsids on any particular
destination to which the client might be directed.
mounted_on_fileid: For objects at the top of an absent file system,
this attribute needs to be available. Since the fileid is within
the present parent file system, there should be no need to
reference the absent file system to provide this information.
Other attributes SHOULD NOT be made available for absent file
systems, even when it is possible to provide them. The server should
not assume that more information is always better and should avoid
gratuitously providing additional information.
When a GETATTR operation includes a bitmask for the attribute
fs_locations, but where the bitmask includes attributes that are not
supported, GETATTR will not return an error but will return the mask
of the actual attributes supported with the results.
Haynes & Noveck Standards Track PAGE 83
RFC 7530 NFSv4 March 2015
Handling of VERIFY/NVERIFY is similar to GETATTR in that if the
attribute mask does not include fs_locations the error NFS4ERR_MOVED
will result. It differs in that any appearance in the attribute mask
of an attribute not supported for an absent file system (and note
that this will include some normally REQUIRED attributes) will also
cause an NFS4ERR_MOVED result.
8.3.2. READDIR and Absent File Systems
A READDIR performed when the current filehandle is within an absent
file system will result in an NFS4ERR_MOVED error, since, unlike the
case of GETATTR, no such exception is made for READDIR.
Attributes for an absent file system may be fetched via a READDIR for
a directory in a present file system, when that directory contains
the root directories of one or more absent file systems. In this
case, the handling is as follows:
o If the attribute set requested includes fs_locations, then the
fetching of attributes proceeds normally, and no NFS4ERR_MOVED
indication is returned even when the rdattr_error attribute is
requested.
o If the attribute set requested does not include fs_locations, then
if the rdattr_error attribute is requested, each directory entry
for the root of an absent file system will report NFS4ERR_MOVED as
the value of the rdattr_error attribute.
o If the attribute set requested does not include either of the
attributes fs_locations or rdattr_error, then the occurrence of
the root of an absent file system within the directory will result
in the READDIR failing with an NFS4ERR_MOVED error.
o The unavailability of an attribute because of a file system's
absence, even one that is ordinarily REQUIRED, does not result in
any error indication. The set of attributes returned for the root
directory of the absent file system in that case is simply
restricted to those actually available.
8.4. Uses of Location Information
The location-bearing attribute of fs_locations provides, together
with the possibility of absent file systems, a number of important
facilities in providing reliable, manageable, and scalable data
access.
Haynes & Noveck Standards Track PAGE 84
RFC 7530 NFSv4 March 2015
When a file system is present, these attributes can provide
alternative locations, to be used to access the same data, in the
event of server failures, communications problems, or other
difficulties that make continued access to the current file system
impossible or otherwise impractical. Under some circumstances,
multiple alternative locations may be used simultaneously to provide
higher-performance access to the file system in question. Provision
of such alternative locations is referred to as "replication",
although there are cases in which replicated sets of data are not in
fact present and the replicas are instead different paths to the same
data.
When a file system is present and subsequently becomes absent,
clients can be given the opportunity to have continued access to
their data, at an alternative location. Transfer of the file system
contents to the new location is referred to as "migration". See
Section 8.4.2 for details.
Alternative locations may be physical replicas of the file system
data or alternative communication paths to the same server or, in the
case of various forms of server clustering, another server providing
access to the same physical file system. The client's
responsibilities in dealing with this transition depend on the
specific nature of the new access path as well as how and whether
data was in fact migrated. These issues will be discussed in detail
below.
Where a file system was not previously present, specification of file
system location provides a means by which file systems located on one
server can be associated with a namespace defined by another server,
thus allowing a general multi-server namespace facility. A
designation of such a location, in place of an absent file system, is
called a "referral".
Because client support for location-related attributes is OPTIONAL, a
server may (but is not required to) take action to hide migration and
referral events from such clients, by acting as a proxy, for example.
8.4.1. File System Replication
The fs_locations attribute provides alternative locations, to be used
to access data in place of, or in addition to, the current file
system instance. On first access to a file system, the client should
obtain the value of the set of alternative locations by interrogating
the fs_locations attribute.
Haynes & Noveck Standards Track PAGE 85
RFC 7530 NFSv4 March 2015
In the event that server failures, communications problems, or other
difficulties make continued access to the current file system
impossible or otherwise impractical, the client can use the
alternative locations as a way to get continued access to its data.
Multiple locations may be used simultaneously, to provide higher
performance through the exploitation of multiple paths between client
and target file system.
Multiple server addresses, whether they are derived from a single
entry with a DNS name representing a set of IP addresses or from
multiple entries each with its own server address, may correspond to
the same actual server.
8.4.2. File System Migration
When a file system is present and becomes absent, clients can be
given the opportunity to have continued access to their data, at an
alternative location, as specified by the fs_locations attribute.
Typically, a client will be accessing the file system in question,
get an NFS4ERR_MOVED error, and then use the fs_locations attribute
to determine the new location of the data.
Such migration can be helpful in providing load balancing or general
resource reallocation. The protocol does not specify how the file
system will be moved between servers. It is anticipated that a
number of different server-to-server transfer mechanisms might be
used, with the choice left to the server implementer. The NFSv4
protocol specifies the method used to communicate the migration event
between client and server.
When an alternative location is designated as the target for
migration, it must designate the same data. Where file systems are
writable, a change made on the original file system must be visible
on all migration targets. Where a file system is not writable but
represents a read-only copy (possibly periodically updated) of a
writable file system, similar requirements apply to the propagation
of updates. Any change visible in the original file system must
already be effected on all migration targets, to avoid any
possibility that a client, in effecting a transition to the migration
target, will see any reversion in file system state.
8.4.3. Referrals
Referrals provide a way of placing a file system in a location within
the namespace essentially without respect to its physical location on
a given server. This allows a single server or a set of servers to
present a multi-server namespace that encompasses file systems
Haynes & Noveck Standards Track PAGE 86
RFC 7530 NFSv4 March 2015
located on multiple servers. Some likely uses of this include
establishment of site-wide or organization-wide namespaces, or even
knitting such together into a truly global namespace.
Referrals occur when a client determines, upon first referencing a
position in the current namespace, that it is part of a new file
system and that the file system is absent. When this occurs,
typically by receiving the error NFS4ERR_MOVED, the actual location
or locations of the file system can be determined by fetching the
fs_locations attribute.
The location-related attribute may designate a single file system
location or multiple file system locations, to be selected based on
the needs of the client.
Use of multi-server namespaces is enabled by NFSv4 but is not
required. The use of multi-server namespaces and their scope will
depend on the applications used and system administration
preferences.
Multi-server namespaces can be established by a single server
providing a large set of referrals to all of the included file
systems. Alternatively, a single multi-server namespace may be
administratively segmented with separate referral file systems (on
separate servers) for each separately administered portion of the
namespace. The top-level referral file system or any segment may use
replicated referral file systems for higher availability.
Generally, multi-server namespaces are for the most part uniform, in
that the same data made available to one client at a given location
in the namespace is made available to all clients at that location.
8.5. Location Entries and Server Identity
As mentioned above, a single location entry may have a server address
target in the form of a DNS name that may represent multiple IP
addresses, while multiple location entries may have their own server
address targets that reference the same server.
When multiple addresses for the same server exist, the client may
assume that for each file system in the namespace of a given server
network address, there exist file systems at corresponding namespace
locations for each of the other server network addresses. It may do
this even in the absence of explicit listing in fs_locations. Such
corresponding file system locations can be used as alternative
locations, just as those explicitly specified via the fs_locations
attribute.
Haynes & Noveck Standards Track PAGE 87
RFC 7530 NFSv4 March 2015
If a single location entry designates multiple server IP addresses,
the client should choose a single one to use. When two server
addresses are designated by a single location entry and they
correspond to different servers, this normally indicates some sort of
misconfiguration, and so the client should avoid using such location
entries when alternatives are available. When they are not, clients
should pick one of the IP addresses and use it, without using others
that are not directed to the same server.
8.6. Additional Client-Side Considerations
When clients make use of servers that implement referrals,
replication, and migration, care should be taken that a user who
mounts a given file system that includes a referral or a relocated
file system continues to see a coherent picture of that user-side
file system despite the fact that it contains a number of server-side
file systems that may be on different servers.
One important issue is upward navigation from the root of a
server-side file system to its parent (specified as ".." in UNIX), in
the case in which it transitions to that file system as a result of
referral, migration, or a transition as a result of replication.
When the client is at such a point, and it needs to ascend to the
parent, it must go back to the parent as seen within the multi-server
namespace rather than sending a LOOKUPP operation to the server,
which would result in the parent within that server's single-server
namespace. In order to do this, the client needs to remember the
filehandles that represent such file system roots and use these
instead of issuing a LOOKUPP operation to the current server. This
will allow the client to present to applications a consistent
namespace, where upward navigation and downward navigation are
consistent.
Another issue concerns refresh of referral locations. When referrals
are used extensively, they may change as server configurations
change. It is expected that clients will cache information related
to traversing referrals so that future client-side requests are
resolved locally without server communication. This is usually
rooted in client-side name lookup caching. Clients should
periodically purge this data for referral points in order to detect
changes in location information.
A potential problem exists if a client were to allow an open-owner to
have state on multiple file systems on a server, in that it is
unclear how the sequence numbers associated with open-owners are to
be dealt with, in the event of transparent state migration. A client
can avoid such a situation if it ensures that any use of an
open-owner is confined to a single file system.
Haynes & Noveck Standards Track PAGE 88
RFC 7530 NFSv4 March 2015
A server MAY decline to migrate state associated with open-owners
that span multiple file systems. In cases in which the server
chooses not to migrate such state, the server MUST return
NFS4ERR_BAD_STATEID when the client uses those stateids on the new
server.
The server MUST return NFS4ERR_STALE_STATEID when the client uses
those stateids on the old server, regardless of whether migration has
occurred or not.
8.7. Effecting File System Referrals
Referrals are effected when an absent file system is encountered and
one or more alternative locations are made available by the
fs_locations attribute. The client will typically get an
NFS4ERR_MOVED error, fetch the appropriate location information, and
proceed to access the file system on a different server, even though
it retains its logical position within the original namespace.
Referrals differ from migration events in that they happen only when
the client has not previously referenced the file system in question
(so there is nothing to transition). Referrals can only come into
effect when an absent file system is encountered at its root.
The examples given in the sections below are somewhat artificial in
that an actual client will not typically do a multi-component lookup
but will have cached information regarding the upper levels of the
name hierarchy. However, these example are chosen to make the
required behavior clear and easy to put within the scope of a small
number of requests, without getting unduly into details of how
specific clients might choose to cache things.
8.7.1. Referral Example (LOOKUP)
Let us suppose that the following COMPOUND is sent in an environment
in which /this/is/the/path is absent from the target server. This
may be for a number of reasons. It may be the case that the file
system has moved, or it may be the case that the target server is
functioning mainly, or solely, to refer clients to the servers on
which various file systems are located.
Haynes & Noveck Standards Track PAGE 89
RFC 7530 NFSv4 March 2015
o PUTROOTFH
o LOOKUP "this"
o LOOKUP "is"
o LOOKUP "the"
o LOOKUP "path"
o GETFH
o GETATTR(fsid, fileid, size, time_modify)
Under the given circumstances, the following will be the result:
o PUTROOTFH --> NFS_OK. The current fh is now the root of the
pseudo-fs.
o LOOKUP "this" --> NFS_OK. The current fh is for /this and is
within the pseudo-fs.
o LOOKUP "is" --> NFS_OK. The current fh is for /this/is and is
within the pseudo-fs.
o LOOKUP "the" --> NFS_OK. The current fh is for /this/is/the and
is within the pseudo-fs.
o LOOKUP "path" --> NFS_OK. The current fh is for /this/is/the/path
and is within a new, absent file system, but ... the client will
never see the value of that fh.
o GETFH --> NFS4ERR_MOVED. Fails, because the current fh is in an
absent file system at the start of the operation and the
specification makes no exception for GETFH.
o GETATTR(fsid, fileid, size, time_modify). Not executed, because
the failure of the GETFH stops the processing of the COMPOUND.
Given the failure of the GETFH, the client has the job of determining
the root of the absent file system and where to find that file
system, i.e., the server and path relative to that server's root fh.
Note here that in this example, the client did not obtain filehandles
and attribute information (e.g., fsid) for the intermediate
directories, so that it would not be sure where the absent file
system starts. It could be the case, for example, that /this/is/the
is the root of the moved file system and that the reason that the
lookup of "path" succeeded is that the file system was not absent on
Haynes & Noveck Standards Track PAGE 90
RFC 7530 NFSv4 March 2015
that operation but was moved between the last LOOKUP and the GETFH
(since COMPOUND is not atomic). Even if we had the fsids for all of
the intermediate directories, we could have no way of knowing that
/this/is/the/path was the root of a new file system, since we don't
yet have its fsid.
In order to get the necessary information, let us re-send the chain
of LOOKUPs with GETFHs and GETATTRs to at least get the fsids so we
can be sure where the appropriate file system boundaries are. The
client could choose to get fs_locations at the same time, but in most
cases the client will have a good guess as to where the file system
boundaries are (because of where NFS4ERR_MOVED was, and was not,
received), making the fetching of fs_locations unnecessary.
OP01: PUTROOTFH --> NFS_OK
- The current fh is at the root of the pseudo-fs.
OP02: GETATTR(fsid) --> NFS_OK
- Just for completeness. Normally, clients will know the fsid of
the pseudo-fs as soon as they establish communication with a
server.
OP03: LOOKUP "this" --> NFS_OK
OP04: GETATTR(fsid) --> NFS_OK
- Get the current fsid to see where the file system boundaries are.
The fsid will be that for the pseudo-fs in this example, so no
boundary.
OP05: GETFH --> NFS_OK
- The current fh is for /this and is within the pseudo-fs.
OP06: LOOKUP "is" --> NFS_OK
- The current fh is for /this/is and is within the pseudo-fs.
OP07: GETATTR(fsid) --> NFS_OK
- Get the current fsid to see where the file system boundaries are.
The fsid will be that for the pseudo-fs in this example, so no
boundary.
Haynes & Noveck Standards Track PAGE 91
RFC 7530 NFSv4 March 2015
OP08: GETFH --> NFS_OK
- The current fh is for /this/is and is within the pseudo-fs.
OP09: LOOKUP "the" --> NFS_OK
- The current fh is for /this/is/the and is within the pseudo-fs.
OP10: GETATTR(fsid) --> NFS_OK
- Get the current fsid to see where the file system boundaries are.
The fsid will be that for the pseudo-fs in this example, so no
boundary.
OP11: GETFH --> NFS_OK
- The current fh is for /this/is/the and is within the pseudo-fs.
OP12: LOOKUP "path" --> NFS_OK
- The current fh is for /this/is/the/path and is within a new,
absent file system, but ...
- The client will never see the value of that fh.
OP13: GETATTR(fsid, fs_locations) --> NFS_OK
- We are getting the fsid to know where the file system boundaries
are. In this operation, the fsid will be different than that of
the parent directory (which in turn was retrieved in OP10). Note
that the fsid we are given will not necessarily be preserved at
the new location. That fsid might be different, and in fact the
fsid we have for this file system might be a valid fsid of a
different file system on that new server.
- In this particular case, we are pretty sure anyway that what has
moved is /this/is/the/path rather than /this/is/the since we have
the fsid of the latter and it is that of the pseudo-fs, which
presumably cannot move. However, in other examples, we might not
have this kind of information to rely on (e.g., /this/is/the might
be a non-pseudo-file system separate from /this/is/the/path), so
we need to have other reliable source information on the boundary
of the file system that is moved. If, for example, the file
system /this/is had moved, we would have a case of migration
rather than referral, and once the boundaries of the migrated file
system were clear we could fetch fs_locations.
Haynes & Noveck Standards Track PAGE 92
RFC 7530 NFSv4 March 2015
- We are fetching fs_locations because the fact that we got an
NFS4ERR_MOVED at this point means that this is most likely a
referral and we need the destination. Even if it is the case that
/this/is/the is a file system that has migrated, we will still
need the location information for that file system.
OP14: GETFH --> NFS4ERR_MOVED
- Fails because current fh is in an absent file system at the start
of the operation, and the specification makes no exception for
GETFH. Note that this means the server will never send the client
a filehandle from within an absent file system.
Given the above, the client knows where the root of the absent file
system is (/this/is/the/path) by noting where the change of fsid
occurred (between "the" and "path"). The fs_locations attribute also
gives the client the actual location of the absent file system so
that the referral can proceed. The server gives the client the bare
minimum of information about the absent file system so that there
will be very little scope for problems of conflict between
information sent by the referring server and information of the file
system's home. No filehandles and very few attributes are present on
the referring server, and the client can treat those it receives as
transient information with the function of enabling the referral.
8.7.2. Referral Example (READDIR)
Another context in which a client may encounter referrals is when it
does a READDIR on a directory in which some of the subdirectories are
the roots of absent file systems.
Suppose such a directory is read as follows:
o PUTROOTFH
o LOOKUP "this"
o LOOKUP "is"
o LOOKUP "the"
o READDIR(fsid, size, time_modify, mounted_on_fileid)
Haynes & Noveck Standards Track PAGE 93
RFC 7530 NFSv4 March 2015
In this case, because rdattr_error is not requested, fs_locations is
not requested, and some of the attributes cannot be provided, the
result will be an NFS4ERR_MOVED error on the READDIR, with the
detailed results as follows:
o PUTROOTFH --> NFS_OK. The current fh is at the root of the
pseudo-fs.
o LOOKUP "this" --> NFS_OK. The current fh is for /this and is
within the pseudo-fs.
o LOOKUP "is" --> NFS_OK. The current fh is for /this/is and is
within the pseudo-fs.
o LOOKUP "the" --> NFS_OK. The current fh is for /this/is/the and
is within the pseudo-fs.
o READDIR(fsid, size, time_modify, mounted_on_fileid) -->
NFS4ERR_MOVED. Note that the same error would have been returned
if /this/is/the had migrated, but it is returned because the
directory contains the root of an absent file system.
So now suppose that we re-send with rdattr_error:
o PUTROOTFH
o LOOKUP "this"
o LOOKUP "is"
o LOOKUP "the"
o READDIR(rdattr_error, fsid, size, time_modify, mounted_on_fileid)
The results will be:
o PUTROOTFH --> NFS_OK. The current fh is at the root of the
pseudo-fs.
o LOOKUP "this" --> NFS_OK. The current fh is for /this and is
within the pseudo-fs.
o LOOKUP "is" --> NFS_OK. The current fh is for /this/is and is
within the pseudo-fs.
o LOOKUP "the" --> NFS_OK. The current fh is for /this/is/the and
is within the pseudo-fs.
Haynes & Noveck Standards Track PAGE 94
RFC 7530 NFSv4 March 2015
o READDIR(rdattr_error, fsid, size, time_modify, mounted_on_fileid)
--> NFS_OK. The attributes for the directory entry with the
component named "path" will only contain rdattr_error with the
value NFS4ERR_MOVED, together with an fsid value and a value for
mounted_on_fileid.
So suppose we do another READDIR to get fs_locations (although we
could have used a GETATTR directly, as in Section 8.7.1):
o PUTROOTFH
o LOOKUP "this"
o LOOKUP "is"
o LOOKUP "the"
o READDIR(rdattr_error, fs_locations, mounted_on_fileid, fsid, size,
time_modify)
The results would be:
o PUTROOTFH --> NFS_OK. The current fh is at the root of the
pseudo-fs.
o LOOKUP "this" --> NFS_OK. The current fh is for /this and is
within the pseudo-fs.
o LOOKUP "is" --> NFS_OK. The current fh is for /this/is and is
within the pseudo-fs.
o LOOKUP "the" --> NFS_OK. The current fh is for /this/is/the and
is within the pseudo-fs.
o READDIR(rdattr_error, fs_locations, mounted_on_fileid, fsid, size,
time_modify) --> NFS_OK. The attributes will be as shown below.
The attributes for the directory entry with the component named
"path" will only contain:
o rdattr_error (value: NFS_OK)
o fs_locations
o mounted_on_fileid (value: unique fileid within referring file
system)
o fsid (value: unique value within referring server)
Haynes & Noveck Standards Track PAGE 95
RFC 7530 NFSv4 March 2015
The attributes for entry "path" will not contain size or time_modify,
because these attributes are not available within an absent file
system.
8.8. The Attribute fs_locations
The fs_locations attribute is defined by both fs_location4
(Section 2.2.6) and fs_locations4 (Section 2.2.7). It is used to
represent the location of a file system by providing a server name
and the path to the root of the file system within that server's
namespace. When a set of servers have corresponding file systems at
the same path within their namespaces, an array of server names may
be provided. An entry in the server array is a UTF-8 string and
represents one of a traditional DNS host name, IPv4 address, IPv6
address, or a zero-length string. A zero-length string SHOULD be
used to indicate the current address being used for the RPC. It is
not a requirement that all servers that share the same rootpath be
listed in one fs_location4 instance. The array of server names is
provided for convenience. Servers that share the same rootpath may
also be listed in separate fs_location4 entries in the fs_locations
attribute.
The fs_locations4 data type and fs_locations attribute contain an
array of such locations. Since the namespace of each server may be
constructed differently, the fs_root field is provided. The path
represented by the fs_root represents the location of the file system
in the current server's namespace, i.e., that of the server from
which the fs_locations attribute was obtained. The fs_root path is
meant to aid the client by clearly referencing the root of the file
system whose locations are being reported, no matter what object
within the current file system the current filehandle designates.
The fs_root is simply the pathname the client used to reach the
object on the current server (i.e., the object to which the
fs_locations attribute applies).
When the fs_locations attribute is interrogated and there are no
alternative file system locations, the server SHOULD return a
zero-length array of fs_location4 structures, together with a
valid fs_root.
As an example, suppose there is a replicated file system located at
two servers (servA and servB). At servA, the file system is located
at path /a/b/c. At servB, the file system is located at path /x/y/z.
If the client were to obtain the fs_locations value for the directory
at /a/b/c/d, it might not necessarily know that the file system's
root is located in servA's namespace at /a/b/c. When the client
switches to servB, it will need to determine that the directory it
first referenced at servA is now represented by the path /x/y/z/d
Haynes & Noveck Standards Track PAGE 96
RFC 7530 NFSv4 March 2015
on servB. To facilitate this, the fs_locations attribute provided by
servA would have an fs_root value of /a/b/c and two entries in
fs_locations. One entry in fs_locations will be for itself (servA),
and the other will be for servB with a path of /x/y/z. With this
information, the client is able to substitute /x/y/z for /a/b/c at
the beginning of its access path and construct /x/y/z/d to use for
the new server.
Note that there is no requirement that the number of components in
each rootpath be the same; there is no relation between the number of
components in the rootpath or fs_root, and none of the components in
each rootpath and fs_root have to be the same. In the above example,
we could have had a third element in the locations array, with server
equal to "servC" and rootpath equal to "/I/II", and a fourth element
in the locations array, with server equal to "servD" and rootpath
equal to "/aleph/beth/gimel/daleth/he".
The relationship between an fs_root and a rootpath is that the client
replaces the pathname indicated in the fs_root for the current server
for the substitute indicated in the rootpath for the new server.
For an example of a referred or migrated file system, suppose there
is a file system located at serv1. At serv1, the file system is
located at /az/buky/vedi/glagoli. The client finds that the object
at glagoli has migrated (or is a referral). The client gets the
fs_locations attribute, which contains an fs_root of /az/buky/vedi/
glagoli, and one element in the locations array, with server equal to
serv2, and rootpath equal to /izhitsa/fita. The client replaces
/az/buky/vedi/glagoli with /izhitsa/fita and uses the latter pathname
on serv2.
Thus, the server MUST return an fs_root that is equal to the path the
client used to reach the object to which the fs_locations attribute
applies. Otherwise, the client cannot determine the new path to use
on the new server.
Haynes & Noveck Standards Track PAGE 97
RFC 7530 NFSv4 March 2015
9. File Locking and Share Reservations
Integrating locking into the NFS protocol necessarily causes it to be
stateful. With the inclusion of share reservations, the protocol
becomes substantially more dependent on state than the traditional
combination of NFS and NLM (Network Lock Manager) [xnfs]. There are
three components to making this state manageable:
o clear division between client and server
o ability to reliably detect inconsistency in state between client
and server
o simple and robust recovery mechanisms
In this model, the server owns the state information. The client
requests changes in locks, and the server responds with the changes
made. Non-client-initiated changes in locking state are infrequent.
The client receives prompt notification of such changes and can
adjust its view of the locking state to reflect the server's changes.
Individual pieces of state created by the server and passed to the
client at its request are represented by 128-bit stateids. These
stateids may represent a particular open file, a set of byte-range
locks held by a particular owner, or a recallable delegation of
privileges to access a file in particular ways or at a particular
location.
In all cases, there is a transition from the most general information
that represents a client as a whole to the eventual lightweight
stateid used for most client and server locking interactions. The
details of this transition will vary with the type of object, but it
always starts with a client ID.
To support Win32 share reservations, it is necessary to atomically
OPEN or CREATE files and apply the appropriate locks in the same
operation. Having a separate share/unshare operation would not allow
correct implementation of the Win32 OpenFile API. In order to
correctly implement share semantics, the previous NFS protocol
mechanisms used when a file is opened or created (LOOKUP, CREATE,
ACCESS) need to be replaced. The NFSv4 protocol has an OPEN
operation that subsumes the NFSv3 methodology of LOOKUP, CREATE, and
ACCESS. However, because many operations require a filehandle, the
traditional LOOKUP is preserved to map a filename to a filehandle
without establishing state on the server. The policy of granting
access or modifying files is managed by the server based on the
client's state. These mechanisms can implement policy ranging from
advisory only locking to full mandatory locking.
Haynes & Noveck Standards Track PAGE 98
RFC 7530 NFSv4 March 2015
9.1. Opens and Byte-Range Locks
It is assumed that manipulating a byte-range lock is rare when
compared to READ and WRITE operations. It is also assumed that
server restarts and network partitions are relatively rare.
Therefore, it is important that the READ and WRITE operations have a
lightweight mechanism to indicate if they possess a held lock. A
byte-range lock request contains the heavyweight information required
to establish a lock and uniquely define the owner of the lock.
The following sections describe the transition from the heavyweight
information to the eventual stateid used for most client and server
locking and lease interactions.
9.1.1. Client ID
For each LOCK request, the client must identify itself to the server.
This is done in such a way as to allow for correct lock
identification and crash recovery. A sequence of a SETCLIENTID
operation followed by a SETCLIENTID_CONFIRM operation is required to
establish the identification onto the server. Establishment of
identification by a new incarnation of the client also has the effect
of immediately breaking any leased state that a previous incarnation
of the client might have had on the server, as opposed to forcing the
new client incarnation to wait for the leases to expire. Breaking
the lease state amounts to the server removing all lock, share
reservation, and, where the server is not supporting the
CLAIM_DELEGATE_PREV claim type, all delegation state associated with
the same client with the same identity. For a discussion of
delegation state recovery, see Section 10.2.1.
Owners of opens and owners of byte-range locks are separate entities
and remain separate even if the same opaque arrays are used to
designate owners of each. The protocol distinguishes between
open-owners (represented by open_owner4 structures) and lock-owners
(represented by lock_owner4 structures).
Both sorts of owners consist of a clientid and an opaque owner
string. For each client, the set of distinct owner values used with
that client constitutes the set of owners of that type, for the given
client.
Each open is associated with a specific open-owner, while each
byte-range lock is associated with a lock-owner and an open-owner,
the latter being the open-owner associated with the open file under
which the LOCK operation was done.
Haynes & Noveck Standards Track PAGE 99
RFC 7530 NFSv4 March 2015
Client identification is encapsulated in the following structure:
struct nfs_client_id4 {
verifier4 verifier;
opaque id<NFS4_OPAQUE_LIMIT>;
};
The first field, verifier, is a client incarnation verifier that is
used to detect client reboots. Only if the verifier is different
from that which the server has previously recorded for the client (as
identified by the second field of the structure, id) does the server
start the process of canceling the client's leased state.
The second field, id, is a variable-length string that uniquely
defines the client.
There are several considerations for how the client generates the id
string:
o The string should be unique so that multiple clients do not
present the same string. The consequences of two clients
presenting the same string range from one client getting an error
to one client having its leased state abruptly and unexpectedly
canceled.
o The string should be selected so the subsequent incarnations
(e.g., reboots) of the same client cause the client to present the
same string. The implementer is cautioned against an approach
that requires the string to be recorded in a local file because
this precludes the use of the implementation in an environment
where there is no local disk and all file access is from an NFSv4
server.
o The string should be different for each server network address
that the client accesses, rather than common to all server network
addresses. The reason is that it may not be possible for the
client to tell if the same server is listening on multiple network
addresses. If the client issues SETCLIENTID with the same id
string to each network address of such a server, the server will
think it is the same client, and each successive SETCLIENTID will
cause the server to begin the process of removing the client's
previous leased state.
o The algorithm for generating the string should not assume that the
client's network address won't change. This includes changes
between client incarnations and even changes while the client is
still running in its current incarnation. This means that if the
client includes just the client's and server's network address in
Haynes & Noveck Standards Track PAGE 100
RFC 7530 NFSv4 March 2015
the id string, there is a real risk, after the client gives up the
network address, that another client, using a similar algorithm
for generating the id string, will generate a conflicting id
string.
Given the above considerations, an example of a well-generated id
string is one that includes:
o The server's network address.
o The client's network address.
o For a user-level NFSv4 client, it should contain additional
information to distinguish the client from other user-level
clients running on the same host, such as a universally unique
identifier (UUID).
o Additional information that tends to be unique, such as one or
more of:
* The client machine's serial number (for privacy reasons, it is
best to perform some one-way function on the serial number).
* A MAC address (for privacy reasons, it is best to perform some
one-way function on the MAC address).
* The timestamp of when the NFSv4 software was first installed on
the client (though this is subject to the previously mentioned
caution about using information that is stored in a file,
because the file might only be accessible over NFSv4).
* A true random number. However, since this number ought to be
the same between client incarnations, this shares the same
problem as that of using the timestamp of the software
installation.
As a security measure, the server MUST NOT cancel a client's leased
state if the principal that established the state for a given id
string is not the same as the principal issuing the SETCLIENTID.
Note that SETCLIENTID (Section 16.33) and SETCLIENTID_CONFIRM
(Section 16.34) have a secondary purpose of establishing the
information the server needs to make callbacks to the client for the
purpose of supporting delegations. It is permitted to change this
information via SETCLIENTID and SETCLIENTID_CONFIRM within the same
incarnation of the client without removing the client's leased state.
Haynes & Noveck Standards Track PAGE 101
RFC 7530 NFSv4 March 2015
Once a SETCLIENTID and SETCLIENTID_CONFIRM sequence has successfully
completed, the client uses the shorthand client identifier, of type
clientid4, instead of the longer and less compact nfs_client_id4
structure. This shorthand client identifier (a client ID) is
assigned by the server and should be chosen so that it will not
conflict with a client ID previously assigned by the server. This
applies across server restarts or reboots. When a client ID is
presented to a server and that client ID is not recognized, as would
happen after a server reboot, the server will reject the request with
the error NFS4ERR_STALE_CLIENTID. When this happens, the client must
obtain a new client ID by use of the SETCLIENTID operation and then
proceed to any other necessary recovery for the server reboot case
(see Section 9.6.2).
The client must also employ the SETCLIENTID operation when it
receives an NFS4ERR_STALE_STATEID error using a stateid derived from
its current client ID, since this also indicates a server reboot,
which has invalidated the existing client ID (see Section 9.6.2 for
details).
See the detailed descriptions of SETCLIENTID (Section 16.33.4) and
SETCLIENTID_CONFIRM (Section 16.34.4) for a complete specification of
the operations.
9.1.2. Server Release of Client ID
If the server determines that the client holds no associated state
for its client ID, the server may choose to release the client ID.
The server may make this choice for an inactive client so that
resources are not consumed by those intermittently active clients.
If the client contacts the server after this release, the server must
ensure that the client receives the appropriate error so that it will
use the SETCLIENTID/SETCLIENTID_CONFIRM sequence to establish a new
identity. It should be clear that the server must be very hesitant
to release a client ID since the resulting work on the client to
recover from such an event will be the same burden as if the server
had failed and restarted. Typically, a server would not release a
client ID unless there had been no activity from that client for many
minutes.
Note that if the id string in a SETCLIENTID request is properly
constructed, and if the client takes care to use the same principal
for each successive use of SETCLIENTID, then, barring an active
denial-of-service attack, NFS4ERR_CLID_INUSE should never be
returned.
Haynes & Noveck Standards Track PAGE 102
RFC 7530 NFSv4 March 2015
However, client bugs, server bugs, or perhaps a deliberate change of
the principal owner of the id string (such as the case of a client
that changes security flavors, and under the new flavor there is no
mapping to the previous owner) will in rare cases result in
NFS4ERR_CLID_INUSE.
In that event, when the server gets a SETCLIENTID for a client ID
that currently has no state, or it has state but the lease has
expired, rather than returning NFS4ERR_CLID_INUSE, the server MUST
allow the SETCLIENTID and confirm the new client ID if followed by
the appropriate SETCLIENTID_CONFIRM.
9.1.3. Use of Seqids
In several contexts, 32-bit sequence values called "seqids" are used
as part of managing locking state. Such values are used:
o To provide an ordering of locking-related operations associated
with a particular lock-owner or open-owner. See Section 9.1.7 for
a detailed explanation.
o To define an ordered set of instances of a set of locks sharing a
particular set of ownership characteristics. See Section 9.1.4.2
for a detailed explanation.
Successive seqid values for the same object are normally arrived at
by incrementing the current value by one. This pattern continues
until the seqid is incremented past NFS4_UINT32_MAX, in which case
one (rather than zero) is to be the next seqid value.
When two seqid values are to be compared to determine which of the
two is later, the possibility of wraparound needs to be considered.
In many cases, the values are such that simple numeric comparisons
can be used. For example, if the seqid values to be compared are
both less than one million, the higher value can be considered the
later. On the other hand, if one of the values is at or near
NFS_UINT32_MAX and the other is less than one million, then
implementations can reasonably decide that the lower value has had
one more wraparound and is thus, while numerically lower, actually
later.
Implementations can compare seqids in the presence of potential
wraparound by adopting the reasonable assumption that the chain of
increments from one to the other is shorter than 2**31. So, if the
difference between the two seqids is less than 2**31, then the lower
seqid is to be treated as earlier. If, however, the difference
Haynes & Noveck Standards Track PAGE 103
RFC 7530 NFSv4 March 2015
between the two seqids is greater than or equal to 2**31, then it can
be assumed that the lower seqid has encountered one more wraparound
and can be treated as later.
9.1.4. Stateid Definition
When the server grants a lock of any type (including opens,
byte-range locks, and delegations), it responds with a unique stateid
that represents a set of locks (often a single lock) for the same
file, of the same type, and sharing the same ownership
characteristics. Thus, opens of the same file by different
open-owners each have an identifying stateid. Similarly, each set of
byte-range locks on a file owned by a specific lock-owner has its own
identifying stateid. Delegations also have associated stateids by
which they may be referenced. The stateid is used as a shorthand
reference to a lock or set of locks, and given a stateid, the server
can determine the associated state-owner or state-owners (in the case
of an open-owner/lock-owner pair) and the associated filehandle.
When stateids are used, the current filehandle must be the one
associated with that stateid.
All stateids associated with a given client ID are associated with a
common lease that represents the claim of those stateids and the
objects they represent to be maintained by the server. See
Section 9.5 for a discussion of the lease.
Each stateid must be unique to the server. Many operations take a
stateid as an argument but not a clientid, so the server must be able
to infer the client from the stateid.
9.1.4.1. Stateid Types
With the exception of special stateids (see Section 9.1.4.3), each
stateid represents locking objects of one of a set of types defined
by the NFSv4 protocol. Note that in all these cases, where we speak
of a guarantee, it is understood there are situations such as a
client restart, or lock revocation, that allow the guarantee to be
voided.
o Stateids may represent opens of files.
Each stateid in this case represents the OPEN state for a given
client ID/open-owner/filehandle triple. Such stateids are subject
to change (with consequent incrementing of the stateid's seqid) in
response to OPENs that result in upgrade and OPEN_DOWNGRADE
operations.
Haynes & Noveck Standards Track PAGE 104
RFC 7530 NFSv4 March 2015
o Stateids may represent sets of byte-range locks.
All locks held on a particular file by a particular owner and all
gotten under the aegis of a particular open file are associated
with a single stateid, with the seqid being incremented whenever
LOCK and LOCKU operations affect that set of locks.
o Stateids may represent file delegations, which are recallable
guarantees by the server to the client that other clients will not
reference, or will not modify, a particular file until the
delegation is returned.
A stateid represents a single delegation held by a client for a
particular filehandle.
9.1.4.2. Stateid Structure
Stateids are divided into two fields: a 96-bit "other" field
identifying the specific set of locks and a 32-bit "seqid" sequence
value. Except in the case of special stateids (see Section 9.1.4.3),
a particular value of the "other" field denotes a set of locks of the
same type (for example, byte-range locks, opens, or delegations), for
a specific file or directory, and sharing the same ownership
characteristics. The seqid designates a specific instance of such a
set of locks, and is incremented to indicate changes in such a set of
locks, by either the addition or deletion of locks from the set, a
change in the byte-range they apply to, or an upgrade or downgrade in
the type of one or more locks.
When such a set of locks is first created, the server returns a
stateid with a seqid value of one. On subsequent operations that
modify the set of locks, the server is required to advance the
seqid field by one whenever it returns a stateid for the same
state-owner/file/type combination and the operation is one that might
make some change in the set of locks actually designated. In this
case, the server will return a stateid with an "other" field the same
as previously used for that state-owner/file/type combination, with
an incremented seqid field.
Seqids will be compared, by both the client and the server. The
client uses such comparisons to determine the order of operations,
while the server uses them to determine whether the
NFS4ERR_OLD_STATEID error is to be returned. In all cases, the
possibility of seqid wraparound needs to be taken into account, as
discussed in Section 9.1.3.
Haynes & Noveck Standards Track PAGE 105
RFC 7530 NFSv4 March 2015
9.1.4.3. Special Stateids
Stateid values whose "other" field is either all zeros or all ones
are reserved. They MUST NOT be assigned by the server but have
special meanings defined by the protocol. The particular meaning
depends on whether the "other" field is all zeros or all ones and the
specific value of the seqid field.
The following combinations of "other" and seqid are defined in NFSv4:
Anonymous Stateid: When "other" and seqid are both zero, the stateid
is treated as a special anonymous stateid, which can be used in
READ, WRITE, and SETATTR requests to indicate the absence of any
open state associated with the request. When an anonymous stateid
value is used, and an existing open denies the form of access
requested, then access will be denied to the request.
READ Bypass Stateid: When "other" and seqid are both all ones, the
stateid is a special READ bypass stateid. When this value is used
in WRITE or SETATTR, it is treated like the anonymous value. When
used in READ, the server MAY grant access, even if access would
normally be denied to READ requests.
If a stateid value is used that has all zeros or all ones in the
"other" field but does not match one of the cases above, the server
MUST return the error NFS4ERR_BAD_STATEID.
Special stateids, unlike other stateids, are not associated with
individual client IDs or filehandles and can be used with all valid
client IDs and filehandles.
9.1.4.4. Stateid Lifetime and Validation
Stateids must remain valid until either a client restart or a server
restart, or until the client returns all of the locks associated with
the stateid by means of an operation such as CLOSE or DELEGRETURN.
If the locks are lost due to revocation, as long as the client ID is
valid, the stateid remains a valid designation of that revoked state.
Stateids associated with byte-range locks are an exception. They
remain valid even if a LOCKU frees all remaining locks, so long as
the open file with which they are associated remains open.
It should be noted that there are situations in which the client's
locks become invalid, without the client requesting they be returned.
These include lease expiration and a number of forms of lock
revocation within the lease period. It is important to note that in
these situations, the stateid remains valid and the client can use it
to determine the disposition of the associated lost locks.
Haynes & Noveck Standards Track PAGE 106
RFC 7530 NFSv4 March 2015
An "other" value must never be reused for a different purpose (i.e.,
different filehandle, owner, or type of locks) within the context of
a single client ID. A server may retain the "other" value for the
same purpose beyond the point where it may otherwise be freed, but if
it does so, it must maintain seqid continuity with previous values.
One mechanism that may be used to satisfy the requirement that the
server recognize invalid and out-of-date stateids is for the server
to divide the "other" field of the stateid into two fields:
o An index into a table of locking-state structures.
o A generation number that is incremented on each allocation of a
table entry for a particular use.
And then store the following in each table entry:
o The client ID with which the stateid is associated.
o The current generation number for the (at most one) valid stateid
sharing this index value.
o The filehandle of the file on which the locks are taken.
o An indication of the type of stateid (open, byte-range lock, file
delegation).
o The last seqid value returned corresponding to the current "other"
value.
o An indication of the current status of the locks associated with
this stateid -- in particular, whether these have been revoked
and, if so, for what reason.
With this information, an incoming stateid can be validated and the
appropriate error returned when necessary. Special and non-special
stateids are handled separately. (See Section 9.1.4.3 for a
discussion of special stateids.)
When a stateid is being tested, and the "other" field is all zeros or
all ones, a check that the "other" and seqid fields match a defined
combination for a special stateid is done and the results determined
as follows:
o If the "other" and seqid fields do not match a defined combination
associated with a special stateid, the error NFS4ERR_BAD_STATEID
is returned.
Haynes & Noveck Standards Track PAGE 107
RFC 7530 NFSv4 March 2015
o If the combination is valid in general but is not appropriate to
the context in which the stateid is used (e.g., an all-zero
stateid is used when an open stateid is required in a LOCK
operation), the error NFS4ERR_BAD_STATEID is also returned.
o Otherwise, the check is completed and the special stateid is
accepted as valid.
When a stateid is being tested, and the "other" field is neither all
zeros nor all ones, the following procedure could be used to validate
an incoming stateid and return an appropriate error, when necessary,
assuming that the "other" field would be divided into a table index
and an entry generation. Note that the terms "earlier" and "later"
used in connection with seqid comparison are to be understood as
explained in Section 9.1.3.
o If the table index field is outside the range of the associated
table, return NFS4ERR_BAD_STATEID.
o If the selected table entry is of a different generation than that
specified in the incoming stateid, return NFS4ERR_BAD_STATEID.
o If the selected table entry does not match the current filehandle,
return NFS4ERR_BAD_STATEID.
o If the stateid represents revoked state or state lost as a result
of lease expiration, then return NFS4ERR_EXPIRED,
NFS4ERR_BAD_STATEID, or NFS4ERR_ADMIN_REVOKED, as appropriate.
o If the stateid type is not valid for the context in which the
stateid appears, return NFS4ERR_BAD_STATEID. Note that a stateid
may be valid in general but invalid for a particular operation,
as, for example, when a stateid that doesn't represent byte-range
locks is passed to the non-from_open case of LOCK or to LOCKU, or
when a stateid that does not represent an open is passed to CLOSE
or OPEN_DOWNGRADE. In such cases, the server MUST return
NFS4ERR_BAD_STATEID.
o If the seqid field is not zero and it is later than the current
sequence value corresponding to the current "other" field, return
NFS4ERR_BAD_STATEID.
o If the seqid field is earlier than the current sequence value
corresponding to the current "other" field, return
NFS4ERR_OLD_STATEID.
Haynes & Noveck Standards Track PAGE 108
RFC 7530 NFSv4 March 2015
o Otherwise, the stateid is valid, and the table entry should
contain any additional information about the type of stateid and
information associated with that particular type of stateid, such
as the associated set of locks (e.g., open-owner and lock-owner
information), as well as information on the specific locks
themselves, such as open modes and byte ranges.
9.1.4.5. Stateid Use for I/O Operations
Clients performing Input/Output (I/O) operations need to select an
appropriate stateid based on the locks (including opens and
delegations) held by the client and the various types of state-owners
sending the I/O requests. SETATTR operations that change the file
size are treated like I/O operations in this regard.
The following rules, applied in order of decreasing priority, govern
the selection of the appropriate stateid. In following these rules,
the client will only consider locks of which it has actually received
notification by an appropriate operation response or callback.
o If the client holds a delegation for the file in question, the
delegation stateid SHOULD be used.
o Otherwise, if the entity corresponding to the lock-owner (e.g., a
process) sending the I/O has a byte-range lock stateid for the
associated open file, then the byte-range lock stateid for that
lock-owner and open file SHOULD be used.
o If there is no byte-range lock stateid, then the OPEN stateid for
the current open-owner, i.e., the OPEN stateid for the open file
in question, SHOULD be used.
o Finally, if none of the above apply, then a special stateid SHOULD
be used.
Ignoring these rules may result in situations in which the server
does not have information necessary to properly process the request.
For example, when mandatory byte-range locks are in effect, if the
stateid does not indicate the proper lock-owner, via a lock stateid,
a request might be avoidably rejected.
The server, however, should not try to enforce these ordering rules
and should use whatever information is available to properly process
I/O requests. In particular, when a client has a delegation for a
given file, it SHOULD take note of this fact in processing a request,
even if it is sent with a special stateid.
Haynes & Noveck Standards Track PAGE 109
RFC 7530 NFSv4 March 2015
9.1.4.6. Stateid Use for SETATTR Operations
In the case of SETATTR operations, a stateid is present. In cases
other than those that set the file size, the client may send either a
special stateid or, when a delegation is held for the file in
question, a delegation stateid. While the server SHOULD validate the
stateid and may use the stateid to optimize the determination as to
whether a delegation is held, it SHOULD note the presence of a
delegation even when a special stateid is sent, and MUST accept a
valid delegation stateid when sent.
9.1.5. Lock-Owner
When requesting a lock, the client must present to the server the
client ID and an identifier for the owner of the requested lock.
These two fields comprise the lock-owner and are defined as follows:
o A client ID returned by the server as part of the client's use of
the SETCLIENTID operation.
o A variable-length opaque array used to uniquely define the owner
of a lock managed by the client.
This may be a thread id, process id, or other unique value.
When the server grants the lock, it responds with a unique stateid.
The stateid is used as a shorthand reference to the lock-owner, since
the server will be maintaining the correspondence between them.
9.1.6. Use of the Stateid and Locking
All READ, WRITE, and SETATTR operations contain a stateid. For the
purposes of this section, SETATTR operations that change the size
attribute of a file are treated as if they are writing the area
between the old and new size (i.e., the range truncated or added to
the file by means of the SETATTR), even where SETATTR is not
explicitly mentioned in the text. The stateid passed to one of these
operations must be one that represents an OPEN (e.g., via the
open-owner), a set of byte-range locks, or a delegation, or it may be
a special stateid representing anonymous access or the READ bypass
stateid.
If the state-owner performs a READ or WRITE in a situation in which
it has established a lock or share reservation on the server (any
OPEN constitutes a share reservation), the stateid (previously
returned by the server) must be used to indicate what locks,
including both byte-range locks and share reservations, are held by
the state-owner. If no state is established by the client -- either
Haynes & Noveck Standards Track PAGE 110
RFC 7530 NFSv4 March 2015
byte-range lock or share reservation -- the anonymous stateid is
used. Regardless of whether an anonymous stateid or a stateid
returned by the server is used, if there is a conflicting share
reservation or mandatory byte-range lock held on the file, the server
MUST refuse to service the READ or WRITE operation.
Share reservations are established by OPEN operations and by their
nature are mandatory in that when the OPEN denies READ or WRITE
operations, that denial results in such operations being rejected
with error NFS4ERR_LOCKED. Byte-range locks may be implemented by
the server as either mandatory or advisory, or the choice of
mandatory or advisory behavior may be determined by the server on the
basis of the file being accessed (for example, some UNIX-based
servers support a "mandatory lock bit" on the mode attribute such
that if set, byte-range locks are required on the file before I/O is
possible). When byte-range locks are advisory, they only prevent the
granting of conflicting lock requests and have no effect on READs or
WRITEs. Mandatory byte-range locks, however, prevent conflicting I/O
operations. When they are attempted, they are rejected with
NFS4ERR_LOCKED. When the client gets NFS4ERR_LOCKED on a file it
knows it has the proper share reservation for, it will need to issue
a LOCK request on the region of the file that includes the region the
I/O was to be performed on, with an appropriate locktype (i.e.,
READ*_LT for a READ operation, WRITE*_LT for a WRITE operation).
With NFSv3, there was no notion of a stateid, so there was no way to
tell if the application process of the client sending the READ or
WRITE operation had also acquired the appropriate byte-range lock on
the file. Thus, there was no way to implement mandatory locking.
With the stateid construct, this barrier has been removed.
Note that for UNIX environments that support mandatory file locking,
the distinction between advisory and mandatory locking is subtle. In
fact, advisory and mandatory byte-range locks are exactly the same
insofar as the APIs and requirements on implementation are concerned.
If the mandatory lock attribute is set on the file, the server checks
to see if the lock-owner has an appropriate shared (read) or
exclusive (write) byte-range lock on the region it wishes to read or
write to. If there is no appropriate lock, the server checks if
there is a conflicting lock (which can be done by attempting to
acquire the conflicting lock on behalf of the lock-owner and, if
successful, release the lock after the READ or WRITE is done), and if
there is, the server returns NFS4ERR_LOCKED.
For Windows environments, there are no advisory byte-range locks, so
the server always checks for byte-range locks during I/O requests.
Haynes & Noveck Standards Track PAGE 111
RFC 7530 NFSv4 March 2015
Thus, the NFSv4 LOCK operation does not need to distinguish between
advisory and mandatory byte-range locks. It is the NFSv4 server's
processing of the READ and WRITE operations that introduces the
distinction.
Every stateid other than the special stateid values noted in this
section, whether returned by an OPEN-type operation (i.e., OPEN,
OPEN_DOWNGRADE) or by a LOCK-type operation (i.e., LOCK or LOCKU),
defines an access mode for the file (i.e., READ, WRITE, or
READ-WRITE) as established by the original OPEN that began the
stateid sequence, and as modified by subsequent OPENs and
OPEN_DOWNGRADEs within that stateid sequence. When a READ, WRITE, or
SETATTR that specifies the size attribute is done, the operation is
subject to checking against the access mode to verify that the
operation is appropriate given the OPEN with which the operation is
associated.
In the case of WRITE-type operations (i.e., WRITEs and SETATTRs that
set size), the server must verify that the access mode allows writing
and return an NFS4ERR_OPENMODE error if it does not. In the case of
READ, the server may perform the corresponding check on the access
mode, or it may choose to allow READ on opens for WRITE only, to
accommodate clients whose write implementation may unavoidably do
reads (e.g., due to buffer cache constraints). However, even if
READs are allowed in these circumstances, the server MUST still check
for locks that conflict with the READ (e.g., another open specifying
denial of READs). Note that a server that does enforce the access
mode check on READs need not explicitly check for conflicting share
reservations since the existence of OPEN for read access guarantees
that no conflicting share reservation can exist.
A READ bypass stateid MAY allow READ operations to bypass locking
checks at the server. However, WRITE operations with a READ bypass
stateid MUST NOT bypass locking checks and are treated exactly the
same as if an anonymous stateid were used.
A lock may not be granted while a READ or WRITE operation using one
of the special stateids is being performed and the range of the lock
request conflicts with the range of the READ or WRITE operation. For
the purposes of this paragraph, a conflict occurs when a shared lock
is requested and a WRITE operation is being performed, or an
exclusive lock is requested and either a READ or a WRITE operation is
being performed. A SETATTR that sets size is treated similarly to a
WRITE as discussed above.
Haynes & Noveck Standards Track PAGE 112
RFC 7530 NFSv4 March 2015
9.1.7. Sequencing of Lock Requests
Locking is different than most NFS operations as it requires
"at-most-one" semantics that are not provided by ONC RPC. ONC RPC
over a reliable transport is not sufficient because a sequence of
locking requests may span multiple TCP connections. In the face of
retransmission or reordering, lock or unlock requests must have a
well-defined and consistent behavior. To accomplish this, each lock
request contains a sequence number that is a consecutively increasing
integer. Different state-owners have different sequences. The
server maintains the last sequence number (L) received and the
response that was returned. The server SHOULD assign a seqid value
of one for the first request issued for any given state-owner.
Subsequent values are arrived at by incrementing the seqid value,
subject to wraparound as described in Section 9.1.3.
Note that for requests that contain a sequence number, for each
state-owner, there should be no more than one outstanding request.
When a request is received, its sequence number (r) is compared to
that of the last one received (L). Only if it has the correct next
sequence, normally L + 1, is the request processed beyond the point
of seqid checking. Given a properly functioning client, the response
to (r) must have been received before the last request (L) was sent.
If a duplicate of last request (r == L) is received, the stored
response is returned. If the sequence value received is any other
value, it is rejected with the return of error NFS4ERR_BAD_SEQID.
Sequence history is reinitialized whenever the SETCLIENTID/
SETCLIENTID_CONFIRM sequence changes the client verifier.
It is critical that the server maintain the last response sent to the
client to provide a more reliable cache of duplicate non-idempotent
requests than that of the traditional cache described in [Chet]. The
traditional duplicate request cache uses a least recently used
algorithm for removing unneeded requests. However, the last lock
request and response on a given state-owner must be cached as long as
the lock state exists on the server.
The client MUST advance the sequence number for the CLOSE, LOCK,
LOCKU, OPEN, OPEN_CONFIRM, and OPEN_DOWNGRADE operations. This is
true even in the event that the previous operation that used the
sequence number received an error. The only exception to this rule
is if the previous operation received one of the following errors:
NFS4ERR_STALE_CLIENTID, NFS4ERR_STALE_STATEID, NFS4ERR_BAD_STATEID,
NFS4ERR_BAD_SEQID, NFS4ERR_BADXDR, NFS4ERR_RESOURCE,
NFS4ERR_NOFILEHANDLE, or NFS4ERR_MOVED.
Haynes & Noveck Standards Track PAGE 113
RFC 7530 NFSv4 March 2015
9.1.8. Recovery from Replayed Requests
As described above, the sequence number is per state-owner. As long
as the server maintains the last sequence number received and follows
the methods described above, there are no risks of a Byzantine router
re-sending old requests. The server need only maintain the
(state-owner, sequence number) state as long as there are open files
or closed files with locks outstanding.
LOCK, LOCKU, OPEN, OPEN_DOWNGRADE, and CLOSE each contain a sequence
number, and therefore the risk of the replay of these operations
resulting in undesired effects is non-existent while the server
maintains the state-owner state.
9.1.9. Interactions of Multiple Sequence Values
Some operations may have multiple sources of data for request
sequence checking and retransmission determination. Some operations
have multiple sequence values associated with multiple types of
state-owners. In addition, such operations may also have a stateid
with its own seqid value, that will be checked for validity.
As noted above, there may be multiple sequence values to check. The
following rules should be followed by the server in processing these
multiple sequence values within a single operation.
o When a sequence value associated with a state-owner is unavailable
for checking because the state-owner is unknown to the server, it
takes no part in the comparison.
o When any of the state-owner sequence values are invalid,
NFS4ERR_BAD_SEQID is returned. When a stateid sequence is
checked, NFS4ERR_BAD_STATEID or NFS4ERR_OLD_STATEID is returned as
appropriate, but NFS4ERR_BAD_SEQID has priority.
o When any one of the sequence values matches a previous request,
for a state-owner, it is treated as a retransmission and not
re-executed. When the type of the operation does not match that
originally used, NFS4ERR_BAD_SEQID is returned. When the server
can determine that the request differs from the original, it may
return NFS4ERR_BAD_SEQID.
o When multiple sequence values match previous operations but the
operations are not the same, NFS4ERR_BAD_SEQID is returned.
Haynes & Noveck Standards Track PAGE 114
RFC 7530 NFSv4 March 2015
o When there are no sequence values available for comparison and the
operation is an OPEN, the server indicates to the client that an
OPEN_CONFIRM is required, unless it can conclusively determine
that confirmation is not required (e.g., by knowing that no
open-owner state has ever been released for the current clientid).
9.1.10. Releasing State-Owner State
When a particular state-owner no longer holds open or file locking
state at the server, the server may choose to release the sequence
number state associated with the state-owner. The server may make
this choice based on lease expiration, the reclamation of server
memory, or other implementation-specific details. Note that when
this is done, a retransmitted request, normally identified by a
matching state-owner sequence, may not be correctly recognized, so
that the client will not receive the original response that it would
have if the state-owner state was not released.
If the server were able to be sure that a given state-owner would
never again be used by a client, such an issue could not arise. Even
when the state-owner state is released and the client subsequently
uses that state-owner, retransmitted requests will be detected as
invalid and the request not executed, although the client may have a
recovery path that is more complicated than simply getting the
original response back transparently.
In any event, the server is able to safely release state-owner state
(in the sense that retransmitted requests will not be erroneously
acted upon) when the state-owner is not currently being utilized by
the client (i.e., there are no open files associated with an
open-owner and no lock stateids associated with a lock-owner). The
server may choose to hold the state-owner state in order to simplify
the recovery path, in the case in which retransmissions of currently
active requests are received. However, the period for which it
chooses to hold this state is implementation specific.
In the case that a LOCK, LOCKU, OPEN_DOWNGRADE, or CLOSE is
retransmitted after the server has previously released the
state-owner state, the server will find that the state-owner has no
files open and an error will be returned to the client. If the
state-owner does have a file open, the stateid will not match and
again an error is returned to the client.
Haynes & Noveck Standards Track PAGE 115
RFC 7530 NFSv4 March 2015
9.1.11. Use of Open Confirmation
In the case that an OPEN is retransmitted and the open-owner is being
used for the first time or the open-owner state has been previously
released by the server, the use of the OPEN_CONFIRM operation will
prevent incorrect behavior. When the server observes the use of the
open-owner for the first time, it will direct the client to perform
the OPEN_CONFIRM for the corresponding OPEN. This sequence
establishes the use of an open-owner and associated sequence number.
Since the OPEN_CONFIRM sequence connects a new open-owner on the
server with an existing open-owner on a client, the sequence number
may have any valid (i.e., non-zero) value. The OPEN_CONFIRM step
assures the server that the value received is the correct one. (See
Section 16.18 for further details.)
There are a number of situations in which the requirement to confirm
an OPEN would pose difficulties for the client and server, in that
they would be prevented from acting in a timely fashion on
information received, because that information would be provisional,
subject to deletion upon non-confirmation. Fortunately, these are
situations in which the server can avoid the need for confirmation
when responding to open requests. The two constraints are:
o The server must not bestow a delegation for any open that would
require confirmation.
o The server MUST NOT require confirmation on a reclaim-type open
(i.e., one specifying claim type CLAIM_PREVIOUS or
CLAIM_DELEGATE_PREV).
These constraints are related in that reclaim-type opens are the only
ones in which the server may be required to send a delegation. For
CLAIM_NULL, sending the delegation is optional, while for
CLAIM_DELEGATE_CUR, no delegation is sent.
Delegations being sent with an open requiring confirmation are
troublesome because recovering from non-confirmation adds undue
complexity to the protocol, while requiring confirmation on reclaim-
type opens poses difficulties in that the inability to resolve the
status of the reclaim until lease expiration may make it difficult to
have timely determination of the set of locks being reclaimed (since
the grace period may expire).
Requiring open confirmation on reclaim-type opens is avoidable
because of the nature of the environments in which such opens are
done. For CLAIM_PREVIOUS opens, this is immediately after server
reboot, so there should be no time for open-owners to be created,
found to be unused, and recycled. For CLAIM_DELEGATE_PREV opens,
Haynes & Noveck Standards Track PAGE 116
RFC 7530 NFSv4 March 2015
we are dealing with either a client reboot situation or a network
partition resulting in deletion of lease state (and returning
NFS4ERR_EXPIRED). A server that supports delegations can be sure
that no open-owners for that client have been recycled since client
initialization or deletion of lease state and thus can be confident
that confirmation will not be required.
9.2. Lock Ranges
The protocol allows a lock-owner to request a lock with a byte range
and then either upgrade or unlock a sub-range of the initial lock.
It is expected that this will be an uncommon type of request. In any
case, servers or server file systems may not be able to support
sub-range lock semantics. In the event that a server receives a
locking request that represents a sub-range of current locking state
for the lock-owner, the server is allowed to return the error
NFS4ERR_LOCK_RANGE to signify that it does not support sub-range lock
operations. Therefore, the client should be prepared to receive this
error and, if appropriate, report the error to the requesting
application.
The client is discouraged from combining multiple independent locking
ranges that happen to be adjacent into a single request, since the
server may not support sub-range requests, and for reasons related to
the recovery of file locking state in the event of server failure.
As discussed in Section 9.6.2 below, the server may employ certain
optimizations during recovery that work effectively only when the
client's behavior during lock recovery is similar to the client's
locking behavior prior to server failure.
9.3. Upgrading and Downgrading Locks
If a client has a write lock on a record, it can request an atomic
downgrade of the lock to a read lock via the LOCK request, by setting
the type to READ_LT. If the server supports atomic downgrade, the
request will succeed. If not, it will return NFS4ERR_LOCK_NOTSUPP.
The client should be prepared to receive this error and, if
appropriate, report the error to the requesting application.
If a client has a read lock on a record, it can request an atomic
upgrade of the lock to a write lock via the LOCK request by setting
the type to WRITE_LT or WRITEW_LT. If the server does not support
atomic upgrade, it will return NFS4ERR_LOCK_NOTSUPP. If the upgrade
can be achieved without an existing conflict, the request will
succeed. Otherwise, the server will return either NFS4ERR_DENIED or
NFS4ERR_DEADLOCK. The error NFS4ERR_DEADLOCK is returned if the
client issued the LOCK request with the type set to WRITEW_LT and the
Haynes & Noveck Standards Track PAGE 117
RFC 7530 NFSv4 March 2015
server has detected a deadlock. The client should be prepared to
receive such errors and, if appropriate, report them to the
requesting application.
9.4. Blocking Locks
Some clients require the support of blocking locks. The NFSv4
protocol must not rely on a callback mechanism and therefore is
unable to notify a client when a previously denied lock has been
granted. Clients have no choice but to continually poll for the
lock. This presents a fairness problem. Two new lock types are
added, READW and WRITEW, and are used to indicate to the server that
the client is requesting a blocking lock. The server should maintain
an ordered list of pending blocking locks. When the conflicting lock
is released, the server may wait the lease period for the first
waiting client to re-request the lock. After the lease period
expires, the next waiting client request is allowed the lock.
Clients are required to poll at an interval sufficiently small that
it is likely to acquire the lock in a timely manner. The server is
not required to maintain a list of pending blocked locks, as it is
not used to provide correct operation but only to increase fairness.
Because of the unordered nature of crash recovery, storing of lock
state to stable storage would be required to guarantee ordered
granting of blocking locks.
Servers may also note the lock types and delay returning denial of
the request to allow extra time for a conflicting lock to be
released, allowing a successful return. In this way, clients can
avoid the burden of needlessly frequent polling for blocking locks.
The server should take care with the length of delay in the event
that the client retransmits the request.
If a server receives a blocking lock request, denies it, and then
later receives a non-blocking request for the same lock, which is
also denied, then it should remove the lock in question from its list
of pending blocking locks. Clients should use such a non-blocking
request to indicate to the server that this is the last time they
intend to poll for the lock, as may happen when the process
requesting the lock is interrupted. This is a courtesy to the
server, to prevent it from unnecessarily waiting a lease period
before granting other lock requests. However, clients are not
required to perform this courtesy, and servers must not depend on
them doing so. Also, clients must be prepared for the possibility
that this final locking request will be accepted.
Haynes & Noveck Standards Track PAGE 118
RFC 7530 NFSv4 March 2015
9.5. Lease Renewal
The purpose of a lease is to allow a server to remove stale locks
that are held by a client that has crashed or is otherwise
unreachable. It is not a mechanism for cache consistency, and lease
renewals may not be denied if the lease interval has not expired.
The client can implicitly provide a positive indication that it is
still active and that the associated state held at the server, for
the client, is still valid. Any operation made with a valid clientid
(DELEGPURGE, LOCK, LOCKT, OPEN, RELEASE_LOCKOWNER, or RENEW) or a
valid stateid (CLOSE, DELEGRETURN, LOCK, LOCKU, OPEN, OPEN_CONFIRM,
OPEN_DOWNGRADE, READ, SETATTR, or WRITE) informs the server to renew
all of the leases for that client (i.e., all those sharing a given
client ID). In the latter case, the stateid must not be one of the
special stateids (anonymous stateid or READ bypass stateid).
Note that if the client had restarted or rebooted, the client would
not be making these requests without issuing the SETCLIENTID/
SETCLIENTID_CONFIRM sequence. The use of the SETCLIENTID/
SETCLIENTID_CONFIRM sequence (one that changes the client verifier)
notifies the server to drop the locking state associated with the
client. SETCLIENTID/SETCLIENTID_CONFIRM never renews a lease.
If the server has rebooted, the stateids (NFS4ERR_STALE_STATEID
error) or the client ID (NFS4ERR_STALE_CLIENTID error) will not be
valid, hence preventing spurious renewals.
This approach allows for low-overhead lease renewal, which scales
well. In the typical case, no extra RPCs are required for lease
renewal, and in the worst case, one RPC is required every lease
period (i.e., a RENEW operation). The number of locks held by the
client is not a factor since all state for the client is involved
with the lease renewal action.
Since all operations that create a new lease also renew existing
leases, the server must maintain a common lease expiration time for
all valid leases for a given client. This lease time can then be
easily updated upon implicit lease renewal actions.
Haynes & Noveck Standards Track PAGE 119
RFC 7530 NFSv4 March 2015
9.6. Crash Recovery
The important requirement in crash recovery is that both the client
and the server know when the other has failed. Additionally, it is
required that a client sees a consistent view of data across server
restarts or reboots. All READ and WRITE operations that may have
been queued within the client or network buffers must wait until the
client has successfully recovered the locks protecting the READ and
WRITE operations.
9.6.1. Client Failure and Recovery
In the event that a client fails, the server may recover the client's
locks when the associated leases have expired. Conflicting locks
from another client may only be granted after this lease expiration.
If the client is able to restart or reinitialize within the lease
period, the client may be forced to wait the remainder of the lease
period before obtaining new locks.
To minimize client delay upon restart, open and lock requests are
associated with an instance of the client by a client-supplied
verifier. This verifier is part of the initial SETCLIENTID call made
by the client. The server returns a client ID as a result of the
SETCLIENTID operation. The client then confirms the use of the
client ID with SETCLIENTID_CONFIRM. The client ID in combination
with an opaque owner field is then used by the client to identify the
open-owner for OPEN. This chain of associations is then used to
identify all locks for a particular client.
Since the verifier will be changed by the client upon each
initialization, the server can compare a new verifier to the verifier
associated with currently held locks and determine that they do not
match. This signifies the client's new instantiation and subsequent
loss of locking state. As a result, the server is free to release
all locks held that are associated with the old client ID that was
derived from the old verifier.
Note that the verifier must have the same uniqueness properties of
the verifier for the COMMIT operation.
9.6.2. Server Failure and Recovery
If the server loses locking state (usually as a result of a restart
or reboot), it must allow clients time to discover this fact and
re-establish the lost locking state. The client must be able to
re-establish the locking state without having the server deny valid
requests because the server has granted conflicting access to another
client. Likewise, if there is the possibility that clients have
Haynes & Noveck Standards Track PAGE 120
RFC 7530 NFSv4 March 2015
not yet re-established their locking state for a file, the server
must disallow READ and WRITE operations for that file. The duration
of this recovery period is equal to the duration of the lease period.
A client can determine that server failure (and thus loss of locking
state) has occurred, when it receives one of two errors. The
NFS4ERR_STALE_STATEID error indicates a stateid invalidated by a
reboot or restart. The NFS4ERR_STALE_CLIENTID error indicates a
client ID invalidated by reboot or restart. When either of these is
received, the client must establish a new client ID (see
Section 9.1.1) and re-establish the locking state as discussed below.
The period of special handling of locking and READs and WRITEs, equal
in duration to the lease period, is referred to as the "grace
period". During the grace period, clients recover locks and the
associated state by reclaim-type locking requests (i.e., LOCK
requests with reclaim set to TRUE and OPEN operations with a claim
type of either CLAIM_PREVIOUS or CLAIM_DELEGATE_PREV). During the
grace period, the server must reject READ and WRITE operations and
non-reclaim locking requests (i.e., other LOCK and OPEN operations)
with an error of NFS4ERR_GRACE.
If the server can reliably determine that granting a non-reclaim
request will not conflict with reclamation of locks by other clients,
the NFS4ERR_GRACE error does not have to be returned and the
non-reclaim client request can be serviced. For the server to be
able to service READ and WRITE operations during the grace period, it
must again be able to guarantee that no possible conflict could arise
between an impending reclaim locking request and the READ or WRITE
operation. If the server is unable to offer that guarantee, the
NFS4ERR_GRACE error must be returned to the client.
For a server to provide simple, valid handling during the grace
period, the easiest method is to simply reject all non-reclaim
locking requests and READ and WRITE operations by returning the
NFS4ERR_GRACE error. However, a server may keep information about
granted locks in stable storage. With this information, the server
could determine if a regular lock or READ or WRITE operation can be
safely processed.
For example, if a count of locks on a given file is available in
stable storage, the server can track reclaimed locks for the file,
and when all reclaims have been processed, non-reclaim locking
requests may be processed. This way, the server can ensure that
non-reclaim locking requests will not conflict with potential reclaim
requests. With respect to I/O requests, if the server is able to
Haynes & Noveck Standards Track PAGE 121
RFC 7530 NFSv4 March 2015
determine that there are no outstanding reclaim requests for a file
by information from stable storage or another similar mechanism, the
processing of I/O requests could proceed normally for the file.
To reiterate, for a server that allows non-reclaim lock and I/O
requests to be processed during the grace period, it MUST determine
that no lock subsequently reclaimed will be rejected and that no lock
subsequently reclaimed would have prevented any I/O operation
processed during the grace period.
Clients should be prepared for the return of NFS4ERR_GRACE errors for
non-reclaim lock and I/O requests. In this case, the client should
employ a retry mechanism for the request. A delay (on the order of
several seconds) between retries should be used to avoid overwhelming
the server. Further discussion of the general issue is included in
[Floyd]. The client must account for the server that is able to
perform I/O and non-reclaim locking requests within the grace period
as well as those that cannot do so.
A reclaim-type locking request outside the server's grace period can
only succeed if the server can guarantee that no conflicting lock or
I/O request has been granted since reboot or restart.
A server may, upon restart, establish a new value for the lease
period. Therefore, clients should, once a new client ID is
established, refetch the lease_time attribute and use it as the basis
for lease renewal for the lease associated with that server.
However, the server must establish, for this restart event, a grace
period at least as long as the lease period for the previous server
instantiation. This allows the client state obtained during the
previous server instance to be reliably re-established.
9.6.3. Network Partitions and Recovery
If the duration of a network partition is greater than the lease
period provided by the server, the server will have not received a
lease renewal from the client. If this occurs, the server may cancel
the lease and free all locks held for the client. As a result, all
stateids held by the client will become invalid or stale. Once the
client is able to reach the server after such a network partition,
all I/O submitted by the client with the now invalid stateids will
fail with the server returning the error NFS4ERR_EXPIRED. Once this
error is received, the client will suitably notify the application
that held the lock.
Haynes & Noveck Standards Track PAGE 122
RFC 7530 NFSv4 March 2015
9.6.3.1. Courtesy Locks
As a courtesy to the client or as an optimization, the server may
continue to hold locks, including delegations, on behalf of a client
for which recent communication has extended beyond the lease period,
delaying the cancellation of the lease. If the server receives a
lock or I/O request that conflicts with one of these courtesy locks
or if it runs out of resources, the server MAY cause lease
cancellation to occur at that time and henceforth return
NFS4ERR_EXPIRED when any of the stateids associated with the freed
locks is used. If lease cancellation has not occurred and the server
receives a lock or I/O request that conflicts with one of the
courtesy locks, the requirements are as follows:
o In the case of a courtesy lock that is not a delegation, it MUST
free the courtesy lock and grant the new request.
o In the case of a lock or an I/O request that conflicts with a
delegation that is being held as a courtesy lock, the server MAY
delay resolution of the request but MUST NOT reject the request
and MUST free the delegation and grant the new request eventually.
o In the case of a request for a delegation that conflicts with a
delegation that is being held as a courtesy lock, the server MAY
grant the new request or not as it chooses, but if it grants the
conflicting request, the delegation held as a courtesy lock MUST
be freed.
If the server does not reboot or cancel the lease before the network
partition is healed, when the original client tries to access a
courtesy lock that was freed, the server SHOULD send back an
NFS4ERR_BAD_STATEID to the client. If the client tries to access a
courtesy lock that was not freed, then the server SHOULD mark all of
the courtesy locks as implicitly being renewed.
9.6.3.2. Lease Cancellation
As a result of lease expiration, leases may be canceled, either
immediately upon expiration or subsequently, depending on the
occurrence of a conflicting lock or extension of the period of
partition beyond what the server will tolerate.
When a lease is canceled, all locking state associated with it is
freed, and the use of any of the associated stateids will result in
NFS4ERR_EXPIRED being returned. Similarly, the use of the associated
clientid will result in NFS4ERR_EXPIRED being returned.
Haynes & Noveck Standards Track PAGE 123
RFC 7530 NFSv4 March 2015
The client should recover from this situation by using SETCLIENTID
followed by SETCLIENTID_CONFIRM, in order to establish a new
clientid. Once a lock is obtained using this clientid, a lease will
be established.
9.6.3.3. Client's Reaction to a Freed Lock
There is no way for a client to predetermine how a given server is
going to behave during a network partition. When the partition
heals, the client still has either all of its locks, some of its
locks, or none of them. The client will be able to examine the
various error return values to determine its response.
NFS4ERR_EXPIRED:
All locks have been freed as a result of a lease cancellation that
occurred during the partition. The client should use a
SETCLIENTID to recover.
NFS4ERR_ADMIN_REVOKED:
The current lock has been revoked before, during, or after the
partition. The client SHOULD handle this error as it normally
would.
NFS4ERR_BAD_STATEID:
The current lock has been revoked/released during the partition,
and the server did not reboot. Other locks MAY still be renewed.
The client need not do a SETCLIENTID and instead SHOULD probe via
a RENEW call.
NFS4ERR_RECLAIM_BAD:
The current lock has been revoked during the partition, and the
server rebooted. The server might have no information on the
other locks. They may still be renewable.
NFS4ERR_NO_GRACE:
The client's locks have been revoked during the partition, and the
server rebooted. None of the client's locks will be renewable.
NFS4ERR_OLD_STATEID:
The server has not rebooted. The client SHOULD handle this error
as it normally would.
Haynes & Noveck Standards Track PAGE 124
RFC 7530 NFSv4 March 2015
9.6.3.4. Edge Conditions
When a network partition is combined with a server reboot, then both
the server and client have responsibilities to ensure that the client
does not reclaim a lock that it should no longer be able to access.
Briefly, those are:
o Client's responsibility: A client MUST NOT attempt to reclaim any
locks that it did not hold at the end of its most recent
successfully established client lease.
o Server's responsibility: A server MUST NOT allow a client to
reclaim a lock unless it knows that it could not have since
granted a conflicting lock. However, in deciding whether a
conflicting lock could have been granted, it is permitted to
assume that its clients are responsible, as above.
A server may consider a client's lease "successfully established"
once it has received an OPEN operation from that client.
The above are directed to CLAIM_PREVIOUS reclaims and not to
CLAIM_DELEGATE_PREV reclaims, which generally do not involve a server
reboot. However, when a server persistently stores delegation
information to support CLAIM_DELEGATE_PREV across a period in which
both client and server are down at the same time, similar strictures
apply.
The next sections give examples showing what can go wrong if these
responsibilities are neglected and also provide examples of server
implementation strategies that could meet a server's
responsibilities.
9.6.3.4.1. First Server Edge Condition
The first edge condition has the following scenario:
1. Client A acquires a lock.
2. Client A and the server experience mutual network partition, such
that client A is unable to renew its lease.
3. Client A's lease expires, so the server releases the lock.
4. Client B acquires a lock that would have conflicted with that of
client A.
5. Client B releases the lock.
Haynes & Noveck Standards Track PAGE 125
RFC 7530 NFSv4 March 2015
6. The server reboots.
7. The network partition between client A and the server heals.
8. Client A issues a RENEW operation and gets back an
NFS4ERR_STALE_CLIENTID.
9. Client A reclaims its lock within the server's grace period.
Thus, at the final step, the server has erroneously granted
client A's lock reclaim. If client B modified the object the lock
was protecting, client A will experience object corruption.
9.6.3.4.2. Second Server Edge Condition
The second known edge condition follows:
1. Client A acquires a lock.
2. The server reboots.
3. Client A and the server experience mutual network partition,
such that client A is unable to reclaim its lock within the
grace period.
4. The server's reclaim grace period ends. Client A has no locks
recorded on the server.
5. Client B acquires a lock that would have conflicted with that of
client A.
6. Client B releases the lock.
7. The server reboots a second time.
8. The network partition between client A and the server heals.
9. Client A issues a RENEW operation and gets back an
NFS4ERR_STALE_CLIENTID.
10. Client A reclaims its lock within the server's grace period.
As with the first edge condition, the final step of the scenario of
the second edge condition has the server erroneously granting
client A's lock reclaim.
Haynes & Noveck Standards Track PAGE 126
RFC 7530 NFSv4 March 2015
9.6.3.4.3. Handling Server Edge Conditions
In both of the above examples, the client attempts reclaim of a lock
that it held at the end of its most recent successfully established
lease; thus, it has fulfilled its responsibility.
The server, however, has failed, by granting a reclaim, despite
having granted a conflicting lock since the reclaimed lock was last
held.
Solving these edge conditions requires that the server either (1)
assume after it reboots that an edge condition occurs, and thus
return NFS4ERR_NO_GRACE for all reclaim attempts, or (2) record some
information in stable storage. The amount of information the server
records in stable storage is in inverse proportion to how harsh the
server wants to be whenever the edge conditions occur. The server
that is completely tolerant of all edge conditions will record in
stable storage every lock that is acquired, removing the lock record
from stable storage only when the lock is unlocked by the client and
the lock's owner advances the sequence number such that the lock
release is not the last stateful event for the owner's sequence. For
the two aforementioned edge conditions, the harshest a server can be,
and still support a grace period for reclaims, requires that the
server record in stable storage some minimal information. For
example, a server implementation could, for each client, save in
stable storage a record containing:
o the client's id string.
o a boolean that indicates if the client's lease expired or if there
was administrative intervention (see Section 9.8) to revoke a
byte-range lock, share reservation, or delegation.
o a timestamp that is updated the first time after a server boot or
reboot the client acquires byte-range locking, share reservation,
or delegation state on the server. The timestamp need not be
updated on subsequent lock requests until the server reboots.
The server implementation would also record in stable storage the
timestamps from the two most recent server reboots.
Assuming the above record keeping, for the first edge condition,
after the server reboots, the record that client A's lease expired
means that another client could have acquired a conflicting record
lock, share reservation, or delegation. Hence, the server must
reject a reclaim from client A with the error NFS4ERR_NO_GRACE or
NFS4ERR_RECLAIM_BAD.
Haynes & Noveck Standards Track PAGE 127
RFC 7530 NFSv4 March 2015
For the second edge condition, after the server reboots for a second
time, the record that the client had an unexpired record lock, share
reservation, or delegation established before the server's previous
incarnation means that the server must reject a reclaim from client A
with the error NFS4ERR_NO_GRACE or NFS4ERR_RECLAIM_BAD.
Regardless of the level and approach to record keeping, the server
MUST implement one of the following strategies (which apply to
reclaims of share reservations, byte-range locks, and delegations):
1. Reject all reclaims with NFS4ERR_NO_GRACE. This is extremely
harsh but is necessary if the server does not want to record lock
state in stable storage.
2. Record sufficient state in stable storage to meet its
responsibilities. In doubt, the server should err on the side of
being harsh.
In the event that, after a server reboot, the server determines
that there is unrecoverable damage or corruption to stable
storage, then for all clients and/or locks affected, the server
MUST return NFS4ERR_NO_GRACE.
9.6.3.4.4. Client Edge Condition
A third edge condition affects the client and not the server. If the
server reboots in the middle of the client reclaiming some locks and
then a network partition is established, the client might be in the
situation of having reclaimed some, but not all, locks. In that
case, a conservative client would assume that the non-reclaimed locks
were revoked.
The third known edge condition follows:
1. Client A acquires a lock 1.
2. Client A acquires a lock 2.
3. The server reboots.
4. Client A issues a RENEW operation and gets back an
NFS4ERR_STALE_CLIENTID.
5. Client A reclaims its lock 1 within the server's grace period.
6. Client A and the server experience mutual network partition,
such that client A is unable to reclaim its remaining locks
within the grace period.
Haynes & Noveck Standards Track PAGE 128
RFC 7530 NFSv4 March 2015
7. The server's reclaim grace period ends.
8. Client B acquires a lock that would have conflicted with
client A's lock 2.
9. Client B releases the lock.
10. The server reboots a second time.
11. The network partition between client A and the server heals.
12. Client A issues a RENEW operation and gets back an
NFS4ERR_STALE_CLIENTID.
13. Client A reclaims both lock 1 and lock 2 within the server's
grace period.
At the last step, the client reclaims lock 2 as if it had held that
lock continuously, when in fact a conflicting lock was granted to
client B.
This occurs because the client failed its responsibility, by
attempting to reclaim lock 2 even though it had not held that lock at
the end of the lease that was established by the SETCLIENTID after
the first server reboot. (The client did hold lock 2 on a previous
lease, but it is only the most recent lease that matters.)
A server could avoid this situation by rejecting the reclaim of
lock 2. However, to do so accurately, it would have to ensure that
additional information about individual locks held survives a reboot.
Server implementations are not required to do that, so the client
must not assume that the server will.
Instead, a client MUST reclaim only those locks that it successfully
acquired from the previous server instance, omitting any that it
failed to reclaim before a new reboot. Thus, in the last step above,
client A should reclaim only lock 1.
9.6.3.4.5. Client's Handling of Reclaim Errors
A mandate for the client's handling of the NFS4ERR_NO_GRACE and
NFS4ERR_RECLAIM_BAD errors is outside the scope of this
specification, since the strategies for such handling are very
dependent on the client's operating environment. However, one
potential approach is described below.
Haynes & Noveck Standards Track PAGE 129
RFC 7530 NFSv4 March 2015
When the client's reclaim fails, it could examine the change
attribute of the objects the client is trying to reclaim state for,
and use that to determine whether to re-establish the state via
normal OPEN or LOCK requests. This is acceptable, provided the
client's operating environment allows it. In other words, the client
implementer is advised to document the behavior for his users. The
client could also inform the application that its byte-range lock or
share reservations (whether they were delegated or not) have been
lost, such as via a UNIX signal, a GUI pop-up window, etc. See
Section 10.5 for a discussion of what the client should do for
dealing with unreclaimed delegations on client state.
For further discussion of revocation of locks, see Section 9.8.
9.7. Recovery from a Lock Request Timeout or Abort
In the event a lock request times out, a client may decide to not
retry the request. The client may also abort the request when the
process for which it was issued is terminated (e.g., in UNIX due to a
signal). It is possible, though, that the server received the
request and acted upon it. This would change the state on the server
without the client being aware of the change. It is paramount that
the client resynchronize state with the server before it attempts any
other operation that takes a seqid and/or a stateid with the same
state-owner. This is straightforward to do without a special
resynchronize operation.
Since the server maintains the last lock request and response
received on the state-owner, for each state-owner, the client should
cache the last lock request it sent such that the lock request did
not receive a response. From this, the next time the client does a
lock operation for the state-owner, it can send the cached request,
if there is one, and if the request was one that established state
(e.g., a LOCK or OPEN operation), the server will return the cached
result or, if it never saw the request, perform it. The client can
follow up with a request to remove the state (e.g., a LOCKU or CLOSE
operation). With this approach, the sequencing and stateid
information on the client and server for the given state-owner will
resynchronize, and in turn the lock state will resynchronize.
9.8. Server Revocation of Locks
At any point, the server can revoke locks held by a client and the
client must be prepared for this event. When the client detects that
its locks have been or may have been revoked, the client is
responsible for validating the state information between itself and
the server. Validating locking state for the client means that it
must verify or reclaim state for each lock currently held.
Haynes & Noveck Standards Track PAGE 130
RFC 7530 NFSv4 March 2015
The first instance of lock revocation is upon server reboot or
re-initialization. In this instance, the client will receive an
error (NFS4ERR_STALE_STATEID or NFS4ERR_STALE_CLIENTID) and the
client will proceed with normal crash recovery as described in the
previous section.
The second lock revocation event is the inability to renew the lease
before expiration. While this is considered a rare or unusual event,
the client must be prepared to recover. Both the server and client
will be able to detect the failure to renew the lease and are capable
of recovering without data corruption. For the server, it tracks the
last renewal event serviced for the client and knows when the lease
will expire. Similarly, the client must track operations that will
renew the lease period. Using the time that each such request was
sent and the time that the corresponding reply was received, the
client should bound the time that the corresponding renewal could
have occurred on the server and thus determine if it is possible that
a lease period expiration could have occurred.
The third lock revocation event can occur as a result of
administrative intervention within the lease period. While this is
considered a rare event, it is possible that the server's
administrator has decided to release or revoke a particular lock held
by the client. As a result of revocation, the client will receive an
error of NFS4ERR_ADMIN_REVOKED. In this instance, the client may
assume that only the state-owner's locks have been lost. The client
notifies the lock holder appropriately. The client cannot assume
that the lease period has been renewed as a result of a failed
operation.
When the client determines the lease period may have expired, the
client must mark all locks held for the associated lease as
"unvalidated". This means the client has been unable to re-establish
or confirm the appropriate lock state with the server. As described
in Section 9.6, there are scenarios in which the server may grant
conflicting locks after the lease period has expired for a client.
When it is possible that the lease period has expired, the client
must validate each lock currently held to ensure that a conflicting
lock has not been granted. The client may accomplish this task by
issuing an I/O request; if there is no relevant I/O pending, a
zero-length read specifying the stateid associated with the lock in
question can be synthesized to trigger the renewal. If the response
to the request is success, the client has validated all of the locks
governed by that stateid and re-established the appropriate state
between itself and the server.
Haynes & Noveck Standards Track PAGE 131
RFC 7530 NFSv4 March 2015
If the I/O request is not successful, then one or more of the locks
associated with the stateid were revoked by the server, and the
client must notify the owner.
9.9. Share Reservations
A share reservation is a mechanism to control access to a file. It
is a separate and independent mechanism from byte-range locking.
When a client opens a file, it issues an OPEN operation to the server
specifying the type of access required (READ, WRITE, or BOTH) and the
type of access to deny others (OPEN4_SHARE_DENY_NONE,
OPEN4_SHARE_DENY_READ, OPEN4_SHARE_DENY_WRITE, or
OPEN4_SHARE_DENY_BOTH). If the OPEN fails, the client will fail the
application's open request.
Pseudo-code definition of the semantics:
if (request.access == 0)
return (NFS4ERR_INVAL)
else if ((request.access & file_state.deny) ||
(request.deny & file_state.access))
return (NFS4ERR_DENIED)
This checking of share reservations on OPEN is done with no exception
for an existing OPEN for the same open-owner.
The constants used for the OPEN and OPEN_DOWNGRADE operations for the
access and deny fields are as follows:
const OPEN4_SHARE_ACCESS_READ = 0x00000001;
const OPEN4_SHARE_ACCESS_WRITE = 0x00000002;
const OPEN4_SHARE_ACCESS_BOTH = 0x00000003;
const OPEN4_SHARE_DENY_NONE = 0x00000000;
const OPEN4_SHARE_DENY_READ = 0x00000001;
const OPEN4_SHARE_DENY_WRITE = 0x00000002;
const OPEN4_SHARE_DENY_BOTH = 0x00000003;
9.10. OPEN/CLOSE Operations
To provide correct share semantics, a client MUST use the OPEN
operation to obtain the initial filehandle and indicate the desired
access and what access, if any, to deny. Even if the client intends
to use one of the special stateids (anonymous stateid or READ bypass
stateid), it must still obtain the filehandle for the regular file
with the OPEN operation so the appropriate share semantics can be
Haynes & Noveck Standards Track PAGE 132
RFC 7530 NFSv4 March 2015
applied. Clients that do not have a deny mode built into their
programming interfaces for opening a file should request a deny mode
of OPEN4_SHARE_DENY_NONE.
The OPEN operation with the CREATE flag also subsumes the CREATE
operation for regular files as used in previous versions of the NFS
protocol. This allows a create with a share to be done atomically.
The CLOSE operation removes all share reservations held by the
open-owner on that file. If byte-range locks are held, the client
SHOULD release all locks before issuing a CLOSE. The server MAY free
all outstanding locks on CLOSE, but some servers may not support the
CLOSE of a file that still has byte-range locks held. The server
MUST return failure, NFS4ERR_LOCKS_HELD, if any locks would exist
after the CLOSE.
The LOOKUP operation will return a filehandle without establishing
any lock state on the server. Without a valid stateid, the server
will assume that the client has the least access. For example, if
one client opened a file with OPEN4_SHARE_DENY_BOTH and another
client accesses the file via a filehandle obtained through LOOKUP,
the second client could only read the file using the special READ
bypass stateid. The second client could not WRITE the file at all
because it would not have a valid stateid from OPEN and the special
anonymous stateid would not be allowed access.
9.10.1. Close and Retention of State Information
Since a CLOSE operation requests deallocation of a stateid, dealing
with retransmission of the CLOSE may pose special difficulties, since
the state information, which normally would be used to determine the
state of the open file being designated, might be deallocated,
resulting in an NFS4ERR_BAD_STATEID error.
Servers may deal with this problem in a number of ways. To provide
the greatest degree of assurance that the protocol is being used
properly, a server should, rather than deallocate the stateid, mark
it as close-pending, and retain the stateid with this status, until
later deallocation. In this way, a retransmitted CLOSE can be
recognized since the stateid points to state information with this
distinctive status, so that it can be handled without error.
Haynes & Noveck Standards Track PAGE 133
RFC 7530 NFSv4 March 2015
When adopting this strategy, a server should retain the state
information until the earliest of:
o Another validly sequenced request for the same open-owner, that is
not a retransmission.
o The time that an open-owner is freed by the server due to period
with no activity.
o All locks for the client are freed as a result of a SETCLIENTID.
Servers may avoid this complexity, at the cost of less complete
protocol error checking, by simply responding NFS4_OK in the event of
a CLOSE for a deallocated stateid, on the assumption that this case
must be caused by a retransmitted close. When adopting this
approach, it is desirable to at least log an error when returning a
no-error indication in this situation. If the server maintains a
reply-cache mechanism, it can verify that the CLOSE is indeed a
retransmission and avoid error logging in most cases.
9.11. Open Upgrade and Downgrade
When an OPEN is done for a file and the open-owner for which the open
is being done already has the file open, the result is to upgrade the
open file status maintained on the server to include the access and
deny bits specified by the new OPEN as well as those for the existing
OPEN. The result is that there is one open file, as far as the
protocol is concerned, and it includes the union of the access and
deny bits for all of the OPEN requests completed. Only a single
CLOSE will be done to reset the effects of both OPENs. Note that the
client, when issuing the OPEN, may not know that the same file is in
fact being opened. The above only applies if both OPENs result in
the OPENed object being designated by the same filehandle.
When the server chooses to export multiple filehandles corresponding
to the same file object and returns different filehandles on two
different OPENs of the same file object, the server MUST NOT "OR"
together the access and deny bits and coalesce the two open files.
Instead, the server must maintain separate OPENs with separate
stateids and will require separate CLOSEs to free them.
When multiple open files on the client are merged into a single open
file object on the server, the close of one of the open files (on the
client) may necessitate change of the access and deny status of the
open file on the server. This is because the union of the access and
deny bits for the remaining opens may be smaller (i.e., a proper
subset) than previously. The OPEN_DOWNGRADE operation is used to
make the necessary change, and the client should use it to update the
Haynes & Noveck Standards Track PAGE 134
RFC 7530 NFSv4 March 2015
server so that share reservation requests by other clients are
handled properly. The stateid returned has the same "other" field as
that passed to the server. The seqid value in the returned stateid
MUST be incremented (Section 9.1.4), even in situations in which
there has been no change to the access and deny bits for the file.
9.12. Short and Long Leases
When determining the time period for the server lease, the usual
lease trade-offs apply. Short leases are good for fast server
recovery at a cost of increased RENEW or READ (with zero length)
requests. Longer leases are certainly kinder and gentler to servers
trying to handle very large numbers of clients. The number of RENEW
requests drops in proportion to the lease time. The disadvantages of
long leases are slower recovery after server failure (the server must
wait for the leases to expire and the grace period to elapse before
granting new lock requests) and increased file contention (if the
client fails to transmit an unlock request, then the server must wait
for lease expiration before granting new locks).
Long leases are usable if the server is able to store lease state in
non-volatile memory. Upon recovery, the server can reconstruct the
lease state from its non-volatile memory and continue operation with
its clients, and therefore long leases would not be an issue.
9.13. Clocks, Propagation Delay, and Calculating Lease Expiration
To avoid the need for synchronized clocks, lease times are granted by
the server as a time delta. However, there is a requirement that the
client and server clocks do not drift excessively over the duration
of the lock. There is also the issue of propagation delay across the
network -- which could easily be several hundred milliseconds -- as
well as the possibility that requests will be lost and need to be
retransmitted.
To take propagation delay into account, the client should subtract it
from lease times (e.g., if the client estimates the one-way
propagation delay as 200 msec, then it can assume that the lease is
already 200 msec old when it gets it). In addition, it will take
another 200 msec to get a response back to the server. So the client
must send a lock renewal or write data back to the server 400 msec
before the lease would expire.
The server's lease period configuration should take into account the
network distance of the clients that will be accessing the server's
resources. It is expected that the lease period will take into
account the network propagation delays and other network delay
Haynes & Noveck Standards Track PAGE 135
RFC 7530 NFSv4 March 2015
factors for the client population. Since the protocol does not allow
for an automatic method to determine an appropriate lease period, the
server's administrator may have to tune the lease period.
9.14. Migration, Replication, and State
When responsibility for handling a given file system is transferred
to a new server (migration) or the client chooses to use an
alternative server (e.g., in response to server unresponsiveness) in
the context of file system replication, the appropriate handling of
state shared between the client and server (i.e., locks, leases,
stateids, and client IDs) is as described below. The handling
differs between migration and replication. For a related discussion
of file server state and recovery of same, see the subsections of
Section 9.6.
In cases in which one server is expected to accept opaque values from
the client that originated from another server, the servers SHOULD
encode the opaque values in big-endian byte order. If this is done,
the new server will be able to parse values like stateids, directory
cookies, filehandles, etc. even if their native byte order is
different from that of other servers cooperating in the replication
and migration of the file system.
9.14.1. Migration and State
In the case of migration, the servers involved in the migration of a
file system SHOULD transfer all server state from the original server
to the new server. This must be done in a way that is transparent to
the client. This state transfer will ease the client's transition
when a file system migration occurs. If the servers are successful
in transferring all state, the client will continue to use stateids
assigned by the original server. Therefore, the new server must
recognize these stateids as valid. This holds true for the client ID
as well. Since responsibility for an entire file system is
transferred with a migration event, there is no possibility that
conflicts will arise on the new server as a result of the transfer of
locks.
As part of the transfer of information between servers, leases would
be transferred as well. The leases being transferred to the new
server will typically have a different expiration time from those for
the same client, previously on the old server. To maintain the
property that all leases on a given server for a given client expire
at the same time, the server should advance the expiration time to
the later of the leases being transferred or the leases already
present. This allows the client to maintain lease renewal of both
classes without special effort.
Haynes & Noveck Standards Track PAGE 136
RFC 7530 NFSv4 March 2015
The servers may choose not to transfer the state information upon
migration. However, this choice is discouraged. In this case, when
the client presents state information from the original server (e.g.,
in a RENEW operation or a READ operation of zero length), the client
must be prepared to receive either NFS4ERR_STALE_CLIENTID or
NFS4ERR_STALE_STATEID from the new server. The client should then
recover its state information as it normally would in response to a
server failure. The new server must take care to allow for the
recovery of state information as it would in the event of server
restart.
A client SHOULD re-establish new callback information with the new
server as soon as possible, according to sequences described in
Sections 16.33 and 16.34. This ensures that server operations are
not blocked by the inability to recall delegations.
9.14.2. Replication and State
Since client switch-over in the case of replication is not under
server control, the handling of state is different. In this case,
leases, stateids, and client IDs do not have validity across a
transition from one server to another. The client must re-establish
its locks on the new server. This can be compared to the
re-establishment of locks by means of reclaim-type requests after a
server reboot. The difference is that the server has no provision to
distinguish requests reclaiming locks from those obtaining new locks
or to defer the latter. Thus, a client re-establishing a lock on the
new server (by means of a LOCK or OPEN request), may have the
requests denied due to a conflicting lock. Since replication is
intended for read-only use of file systems, such denial of locks
should not pose large difficulties in practice. When an attempt to
re-establish a lock on a new server is denied, the client should
treat the situation as if its original lock had been revoked.
9.14.3. Notification of Migrated Lease
In the case of lease renewal, the client may not be submitting
requests for a file system that has been migrated to another server.
This can occur because of the implicit lease renewal mechanism. The
client renews leases for all file systems when submitting a request
to any one file system at the server.
In order for the client to schedule renewal of leases that may have
been relocated to the new server, the client must find out about
lease relocation before those leases expire. To accomplish this, all
operations that implicitly renew leases for a client (such as OPEN,
CLOSE, READ, WRITE, RENEW, LOCK, and others) will return the error
NFS4ERR_LEASE_MOVED if responsibility for any of the leases to be
Haynes & Noveck Standards Track PAGE 137
RFC 7530 NFSv4 March 2015
renewed has been transferred to a new server. This condition will
continue until the client receives an NFS4ERR_MOVED error and the
server receives the subsequent GETATTR(fs_locations) for an access to
each file system for which a lease has been moved to a new server.
By convention, the compound including the GETATTR(fs_locations)
SHOULD append a RENEW operation to permit the server to identify the
client doing the access.
Upon receiving the NFS4ERR_LEASE_MOVED error, a client that supports
file system migration MUST probe all file systems from that server on
which it holds open state. Once the client has successfully probed
all those file systems that are migrated, the server MUST resume
normal handling of stateful requests from that client.
In order to support legacy clients that do not handle the
NFS4ERR_LEASE_MOVED error correctly, the server SHOULD time out after
a wait of at least two lease periods, at which time it will resume
normal handling of stateful requests from all clients. If a client
attempts to access the migrated files, the server MUST reply with
NFS4ERR_MOVED.
When the client receives an NFS4ERR_MOVED error, the client can
follow the normal process to obtain the new server information
(through the fs_locations attribute) and perform renewal of those
leases on the new server. If the server has not had state
transferred to it transparently, the client will receive either
NFS4ERR_STALE_CLIENTID or NFS4ERR_STALE_STATEID from the new server,
as described above. The client can then recover state information as
it does in the event of server failure.
9.14.4. Migration and the lease_time Attribute
In order that the client may appropriately manage its leases in the
case of migration, the destination server must establish proper
values for the lease_time attribute.
When state is transferred transparently, that state should include
the correct value of the lease_time attribute. The lease_time
attribute on the destination server must never be less than that on
the source since this would result in premature expiration of leases
granted by the source server. Upon migration, in which state is
transferred transparently, the client is under no obligation to
refetch the lease_time attribute and may continue to use the value
previously fetched (on the source server).
If state has not been transferred transparently (i.e., the client
sees a real or simulated server reboot), the client should fetch the
value of lease_time on the new (i.e., destination) server and use it
Haynes & Noveck Standards Track PAGE 138
RFC 7530 NFSv4 March 2015
for subsequent locking requests. However, the server must respect a
grace period at least as long as the lease_time on the source server,
in order to ensure that clients have ample time to reclaim their
locks before potentially conflicting non-reclaimed locks are granted.
The means by which the new server obtains the value of lease_time on
the old server is left to the server implementations. It is not
specified by the NFSv4 protocol.
10. Client-Side Caching
Client-side caching of data, file attributes, and filenames is
essential to providing good performance with the NFS protocol.
Providing distributed cache coherence is a difficult problem, and
previous versions of the NFS protocol have not attempted it.
Instead, several NFS client implementation techniques have been used
to reduce the problems that a lack of coherence poses for users.
These techniques have not been clearly defined by earlier protocol
specifications, and it is often unclear what is valid or invalid
client behavior.
The NFSv4 protocol uses many techniques similar to those that have
been used in previous protocol versions. The NFSv4 protocol does not
provide distributed cache coherence. However, it defines a more
limited set of caching guarantees to allow locks and share
reservations to be used without destructive interference from
client-side caching.
In addition, the NFSv4 protocol introduces a delegation mechanism
that allows many decisions normally made by the server to be made
locally by clients. This mechanism provides efficient support of the
common cases where sharing is infrequent or where sharing is
read-only.
10.1. Performance Challenges for Client-Side Caching
Caching techniques used in previous versions of the NFS protocol have
been successful in providing good performance. However, several
scalability challenges can arise when those techniques are used with
very large numbers of clients. This is particularly true when
clients are geographically distributed, which classically increases
the latency for cache revalidation requests.
The previous versions of the NFS protocol repeat their file data
cache validation requests at the time the file is opened. This
behavior can have serious performance drawbacks. A common case is
one in which a file is only accessed by a single client. Therefore,
sharing is infrequent.
Haynes & Noveck Standards Track PAGE 139
RFC 7530 NFSv4 March 2015
In this case, repeated reference to the server to find that no
conflicts exist is expensive. A better option with regards to
performance is to allow a client that repeatedly opens a file to do
so without reference to the server. This is done until potentially
conflicting operations from another client actually occur.
A similar situation arises in connection with file locking. Sending
file lock and unlock requests to the server as well as the READ and
WRITE requests necessary to make data caching consistent with the
locking semantics (see Section 10.3.2) can severely limit
performance. When locking is used to provide protection against
infrequent conflicts, a large penalty is incurred. This penalty may
discourage the use of file locking by applications.
The NFSv4 protocol provides more aggressive caching strategies with
the following design goals:
o Compatibility with a large range of server semantics.
o Providing the same caching benefits as previous versions of the
NFS protocol when unable to provide the more aggressive model.
o Organizing requirements for aggressive caching so that a large
portion of the benefit can be obtained even when not all of the
requirements can be met.
The appropriate requirements for the server are discussed in later
sections, in which specific forms of caching are covered (see
Section 10.4).
10.2. Delegation and Callbacks
Recallable delegation of server responsibilities for a file to a
client improves performance by avoiding repeated requests to the
server in the absence of inter-client conflict. With the use of a
"callback" RPC from server to client, a server recalls delegated
responsibilities when another client engages in the sharing of a
delegated file.
A delegation is passed from the server to the client, specifying the
object of the delegation and the type of delegation. There are
different types of delegations, but each type contains a stateid to
be used to represent the delegation when performing operations that
depend on the delegation. This stateid is similar to those
associated with locks and share reservations but differs in that the
stateid for a delegation is associated with a client ID and may be
Haynes & Noveck Standards Track PAGE 140
RFC 7530 NFSv4 March 2015
used on behalf of all the open-owners for the given client. A
delegation is made to the client as a whole and not to any specific
process or thread of control within it.
Because callback RPCs may not work in all environments (due to
firewalls, for example), correct protocol operation does not depend
on them. Preliminary testing of callback functionality by means of a
CB_NULL procedure determines whether callbacks can be supported. The
CB_NULL procedure checks the continuity of the callback path. A
server makes a preliminary assessment of callback availability to a
given client and avoids delegating responsibilities until it has
determined that callbacks are supported. Because the granting of a
delegation is always conditional upon the absence of conflicting
access, clients must not assume that a delegation will be granted,
and they must always be prepared for OPENs to be processed without
any delegations being granted.
Once granted, a delegation behaves in most ways like a lock. There
is an associated lease that is subject to renewal, together with all
of the other leases held by that client.
Unlike locks, an operation by a second client to a delegated file
will cause the server to recall a delegation through a callback.
On recall, the client holding the delegation must flush modified
state (such as modified data) to the server and return the
delegation. The conflicting request will not be acted on until the
recall is complete. The recall is considered complete when the
client returns the delegation or the server times out its wait for
the delegation to be returned and revokes the delegation as a result
of the timeout. In the interim, the server will either delay
responding to conflicting requests or respond to them with
NFS4ERR_DELAY. Following the resolution of the recall, the server
has the information necessary to grant or deny the second client's
request.
At the time the client receives a delegation recall, it may have
substantial state that needs to be flushed to the server. Therefore,
the server should allow sufficient time for the delegation to be
returned since it may involve numerous RPCs to the server. If the
server is able to determine that the client is diligently flushing
state to the server as a result of the recall, the server MAY extend
the usual time allowed for a recall. However, the time allowed for
recall completion should not be unbounded.
Haynes & Noveck Standards Track PAGE 141
RFC 7530 NFSv4 March 2015
An example of this is when responsibility to mediate opens on a given
file is delegated to a client (see Section 10.4). The server will
not know what opens are in effect on the client. Without this
knowledge, the server will be unable to determine if the access and
deny state for the file allows any particular open until the
delegation for the file has been returned.
A client failure or a network partition can result in failure to
respond to a recall callback. In this case, the server will revoke
the delegation; this in turn will render useless any modified state
still on the client.
Clients need to be aware that server implementers may enforce
practical limitations on the number of delegations issued. Further,
as there is no way to determine which delegations to revoke, the
server is allowed to revoke any. If the server is implemented to
revoke another delegation held by that client, then the client may
be able to determine that a limit has been reached because each new
delegation request results in a revoke. The client could then
determine which delegations it may not need and preemptively
release them.
10.2.1. Delegation Recovery
There are three situations that delegation recovery must deal with:
o Client reboot or restart
o Server reboot or restart (see Section 9.6.3.1)
o Network partition (full or callback-only)
In the event that the client reboots or restarts, the confirmation of
a SETCLIENTID done with an nfs_client_id4 with a new verifier4 value
will result in the release of byte-range locks and share
reservations. Delegations, however, may be treated a bit
differently.
There will be situations in which delegations will need to be
re-established after a client reboots or restarts. The reason for
this is the client may have file data stored locally and this data
was associated with the previously held delegations. The client will
need to re-establish the appropriate file state on the server.
To allow for this type of client recovery, the server MAY allow
delegations to be retained after other sorts of locks are released.
This implies that requests from other clients that conflict with
these delegations will need to wait. Because the normal recall
Haynes & Noveck Standards Track PAGE 142
RFC 7530 NFSv4 March 2015
process may require significant time for the client to flush changed
state to the server, other clients need to be prepared for delays
that occur because of a conflicting delegation. In order to give
clients a chance to get through the reboot process -- during which
leases will not be renewed -- the server MAY extend the period for
delegation recovery beyond the typical lease expiration period. For
open delegations, such delegations that are not released are
reclaimed using OPEN with a claim type of CLAIM_DELEGATE_PREV. (See
Sections 10.5 and 16.16 for discussions of open delegation and the
details of OPEN, respectively.)
A server MAY support a claim type of CLAIM_DELEGATE_PREV, but if it
does, it MUST NOT remove delegations upon SETCLIENTID_CONFIRM and
instead MUST make them available for client reclaim using
CLAIM_DELEGATE_PREV. The server MUST NOT remove the delegations
until either the client does a DELEGPURGE or one lease period has
elapsed from the time -- whichever is later -- of the
SETCLIENTID_CONFIRM or the last successful CLAIM_DELEGATE_PREV
reclaim.
Note that the requirement stated above is not meant to imply that,
when the server is no longer obliged, as required above, to retain
delegation information, it should necessarily dispose of it. Some
specific cases are:
o When the period is terminated by the occurrence of DELEGPURGE,
deletion of unreclaimed delegations is appropriate and desirable.
o When the period is terminated by a lease period elapsing without a
successful CLAIM_DELEGATE_PREV reclaim, and that situation appears
to be the result of a network partition (i.e., lease expiration
has occurred), a server's lease expiration approach, possibly
including the use of courtesy locks, would normally provide for
the retention of unreclaimed delegations. Even in the event that
lease cancellation occurs, such delegation should be reclaimed
using CLAIM_DELEGATE_PREV as part of network partition recovery.
o When the period of non-communicating is followed by a client
reboot, unreclaimed delegations should also be reclaimable by use
of CLAIM_DELEGATE_PREV as part of client reboot recovery.
o When the period is terminated by a lease period elapsing without a
successful CLAIM_DELEGATE_PREV reclaim, and lease renewal is
occurring, the server may well conclude that unreclaimed
delegations have been abandoned and consider the situation as one
in which an implied DELEGPURGE should be assumed.
Haynes & Noveck Standards Track PAGE 143
RFC 7530 NFSv4 March 2015
A server that supports a claim type of CLAIM_DELEGATE_PREV MUST
support the DELEGPURGE operation, and similarly, a server that
supports DELEGPURGE MUST support CLAIM_DELEGATE_PREV. A server that
does not support CLAIM_DELEGATE_PREV MUST return NFS4ERR_NOTSUPP if
the client attempts to use that feature or performs a DELEGPURGE
operation.
Support for a claim type of CLAIM_DELEGATE_PREV is often referred to
as providing for "client-persistent delegations" in that they allow
the use of persistent storage on the client to store data written by
the client, even across a client restart. It should be noted that,
with the optional exception noted below, this feature requires
persistent storage to be used on the client and does not add to
persistent storage requirements on the server.
One good way to think about client-persistent delegations is that for
the most part, they function like "courtesy locks", with special
semantic adjustments to allow them to be retained across a client
restart, which cause all other sorts of locks to be freed. Such
locks are generally not retained across a server restart. The one
exception is the case of simultaneous failure of the client and
server and is discussed below.
When the server indicates support of CLAIM_DELEGATE_PREV (implicitly)
by returning NFS_OK to DELEGPURGE, a client with a write delegation
can use write-back caching for data to be written to the server,
deferring the write-back until such time as the delegation is
recalled, possibly after intervening client restarts. Similarly,
when the server indicates support of CLAIM_DELEGATE_PREV, a client
with a read delegation and an open-for-write subordinate to that
delegation may be sure of the integrity of its persistently cached
copy of the file after a client restart without specific verification
of the change attribute.
When the server reboots or restarts, delegations are reclaimed (using
the OPEN operation with CLAIM_PREVIOUS) in a similar fashion to
byte-range locks and share reservations. However, there is a slight
semantic difference. In the normal case, if the server decides that
a delegation should not be granted, it performs the requested action
(e.g., OPEN) without granting any delegation. For reclaim, the
server grants the delegation, but a special designation is applied so
that the client treats the delegation as having been granted but
recalled by the server. Because of this, the client has the duty to
Haynes & Noveck Standards Track PAGE 144
RFC 7530 NFSv4 March 2015
write all modified state to the server and then return the
delegation. This process of handling delegation reclaim reconciles
three principles of the NFSv4 protocol:
o Upon reclaim, a client claiming resources assigned to it by an
earlier server instance must be granted those resources.
o The server has unquestionable authority to determine whether
delegations are to be granted and, once granted, whether they are
to be continued.
o The use of callbacks is not to be depended upon until the client
has proven its ability to receive them.
When a client has more than a single open associated with a
delegation, state for those additional opens can be established using
OPEN operations of type CLAIM_DELEGATE_CUR. When these are used to
establish opens associated with reclaimed delegations, the server
MUST allow them when made within the grace period.
Situations in which there is a series of client and server restarts
where there is no restart of both at the same time are dealt with via
a combination of CLAIM_DELEGATE_PREV and CLAIM_PREVIOUS reclaim
cycles. Persistent storage is needed only on the client. For each
server failure, a CLAIM_PREVIOUS reclaim cycle is done, while for
each client restart, a CLAIM_DELEGATE_PREV reclaim cycle is done.
To deal with the possibility of simultaneous failure of client and
server (e.g., a data center power outage), the server MAY
persistently store delegation information so that it can respond to a
CLAIM_DELEGATE_PREV reclaim request that it receives from a
restarting client. This is the one case in which persistent
delegation state can be retained across a server restart. A server
is not required to store this information, but if it does do so, it
should do so for write delegations and for read delegations, during
the pendency of which (across multiple client and/or server
instances), some open-for-write was done as part of delegation. When
the space to persistently record such information is limited, the
server should recall delegations in this class in preference to
keeping them active without persistent storage recording.
When a network partition occurs, delegations are subject to freeing
by the server when the lease renewal period expires. This is similar
to the behavior for locks and share reservations, and as for locks
and share reservations, it may be modified by support for "courtesy
locks" in which locks are not freed in the absence of a conflicting
lock request. Whereas for locks and share reservations the freeing
of locks will occur immediately upon the appearance of a conflicting
Haynes & Noveck Standards Track PAGE 145
RFC 7530 NFSv4 March 2015
request, for delegations, the server MAY institute a period during
which conflicting requests are held off. Eventually, the occurrence
of a conflicting request from another client will cause revocation of
the delegation.
A loss of the callback path (e.g., by a later network configuration
change) will have a similar effect in that it can also result in
revocation of a delegation. A recall request will fail, and
revocation of the delegation will result.
A client normally finds out about revocation of a delegation when it
uses a stateid associated with a delegation and receives one of the
errors NFS4ERR_EXPIRED, NFS4ERR_BAD_STATEID, or NFS4ERR_ADMIN_REVOKED
(NFS4ERR_EXPIRED indicates that all lock state associated with the
client has been lost). It also may find out about delegation
revocation after a client reboot when it attempts to reclaim a
delegation and receives NFS4ERR_EXPIRED. Note that in the case of a
revoked OPEN_DELEGATE_WRITE delegation, there are issues because data
may have been modified by the client whose delegation is revoked and,
separately, by other clients. See Section 10.5.1 for a discussion of
such issues. Note also that when delegations are revoked,
information about the revoked delegation will be written by the
server to stable storage (as described in Section 9.6). This is done
to deal with the case in which a server reboots after revoking a
delegation but before the client holding the revoked delegation is
notified about the revocation.
Note that when there is a loss of a delegation, due to a network
partition in which all locks associated with the lease are lost, the
client will also receive the error NFS4ERR_EXPIRED. This case can be
distinguished from other situations in which delegations are revoked
by seeing that the associated clientid becomes invalid so that
NFS4ERR_STALE_CLIENTID is returned when it is used.
When NFS4ERR_EXPIRED is returned, the server MAY retain information
about the delegations held by the client, deleting those that are
invalidated by a conflicting request. Retaining such information
will allow the client to recover all non-invalidated delegations
using the claim type CLAIM_DELEGATE_PREV, once the
SETCLIENTID_CONFIRM is done to recover. Attempted recovery of a
delegation that the client has no record of, typically because they
were invalidated by conflicting requests, will result in the error
NFS4ERR_BAD_RECLAIM. Once a reclaim is attempted for all delegations
that the client held, it SHOULD do a DELEGPURGE to allow any
remaining server delegation information to be freed.
Haynes & Noveck Standards Track PAGE 146
RFC 7530 NFSv4 March 2015
10.3. Data Caching
When applications share access to a set of files, they need to be
implemented so as to take account of the possibility of conflicting
access by another application. This is true whether the applications
in question execute on different clients or reside on the same
client.
Share reservations and byte-range locks are the facilities the NFSv4
protocol provides to allow applications to coordinate access by
providing mutual exclusion facilities. The NFSv4 protocol's data
caching must be implemented such that it does not invalidate the
assumptions that those using these facilities depend upon.
10.3.1. Data Caching and OPENs
In order to avoid invalidating the sharing assumptions that
applications rely on, NFSv4 clients should not provide cached data to
applications or modify it on behalf of an application when it would
not be valid to obtain or modify that same data via a READ or WRITE
operation.
Furthermore, in the absence of open delegation (see Section 10.4),
two additional rules apply. Note that these rules are obeyed in
practice by many NFSv2 and NFSv3 clients.
o First, cached data present on a client must be revalidated after
doing an OPEN. Revalidating means that the client fetches the
change attribute from the server, compares it with the cached
change attribute, and, if different, declares the cached data (as
well as the cached attributes) as invalid. This is to ensure that
the data for the OPENed file is still correctly reflected in the
client's cache. This validation must be done at least when the
client's OPEN operation includes DENY=WRITE or BOTH, thus
terminating a period in which other clients may have had the
opportunity to open the file with WRITE access. Clients may
choose to do the revalidation more often (such as at OPENs
specifying DENY=NONE) to parallel the NFSv3 protocol's practice
for the benefit of users assuming this degree of cache
revalidation.
Since the change attribute is updated for data and metadata
modifications, some client implementers may be tempted to use the
time_modify attribute and not the change attribute to validate
cached data, so that metadata changes do not spuriously invalidate
clean data. The implementer is cautioned against this approach.
The change attribute is guaranteed to change for each update to
the file, whereas time_modify is guaranteed to change only at the
Haynes & Noveck Standards Track PAGE 147
RFC 7530 NFSv4 March 2015
granularity of the time_delta attribute. Use by the client's data
cache validation logic of time_modify and not the change attribute
runs the risk of the client incorrectly marking stale data as
valid.
o Second, modified data must be flushed to the server before closing
a file OPENed for write. This is complementary to the first rule.
If the data is not flushed at CLOSE, the revalidation done after
the client OPENs a file is unable to achieve its purpose. The
other aspect to flushing the data before close is that the data
must be committed to stable storage, at the server, before the
CLOSE operation is requested by the client. In the case of a
server reboot or restart and a CLOSEd file, it may not be possible
to retransmit the data to be written to the file -- hence, this
requirement.
10.3.2. Data Caching and File Locking
For those applications that choose to use file locking instead of
share reservations to exclude inconsistent file access, there is an
analogous set of constraints that apply to client-side data caching.
These rules are effective only if the file locking is used in a way
that matches in an equivalent way the actual READ and WRITE
operations executed. This is as opposed to file locking that is
based on pure convention. For example, it is possible to manipulate
a two-megabyte file by dividing the file into two one-megabyte
regions and protecting access to the two regions by file locks on
bytes zero and one. A lock for write on byte zero of the file would
represent the right to do READ and WRITE operations on the first
region. A lock for write on byte one of the file would represent the
right to do READ and WRITE operations on the second region. As long
as all applications manipulating the file obey this convention, they
will work on a local file system. However, they may not work with
the NFSv4 protocol unless clients refrain from data caching.
The rules for data caching in the file locking environment are:
o First, when a client obtains a file lock for a particular region,
the data cache corresponding to that region (if any cached data
exists) must be revalidated. If the change attribute indicates
that the file may have been updated since the cached data was
obtained, the client must flush or invalidate the cached data for
the newly locked region. A client might choose to invalidate all
of the non-modified cached data that it has for the file, but the
only requirement for correct operation is to invalidate all of the
data in the newly locked region.
Haynes & Noveck Standards Track PAGE 148
RFC 7530 NFSv4 March 2015
o Second, before releasing a write lock for a region, all modified
data for that region must be flushed to the server. The modified
data must also be written to stable storage.
Note that flushing data to the server and the invalidation of cached
data must reflect the actual byte ranges locked or unlocked.
Rounding these up or down to reflect client cache block boundaries
will cause problems if not carefully done. For example, writing a
modified block when only half of that block is within an area being
unlocked may cause invalid modification to the region outside the
unlocked area. This, in turn, may be part of a region locked by
another client. Clients can avoid this situation by synchronously
performing portions of WRITE operations that overlap that portion
(initial or final) that is not a full block. Similarly, invalidating
a locked area that is not an integral number of full buffer blocks
would require the client to read one or two partial blocks from the
server if the revalidation procedure shows that the data that the
client possesses may not be valid.
The data that is written to the server as a prerequisite to the
unlocking of a region must be written, at the server, to stable
storage. The client may accomplish this either with synchronous
writes or by following asynchronous writes with a COMMIT operation.
This is required because retransmission of the modified data after a
server reboot might conflict with a lock held by another client.
A client implementation may choose to accommodate applications that
use byte-range locking in non-standard ways (e.g., using a byte-range
lock as a global semaphore) by flushing to the server more data upon
a LOCKU than is covered by the locked range. This may include
modified data within files other than the one for which the unlocks
are being done. In such cases, the client must not interfere with
applications whose READs and WRITEs are being done only within the
bounds of record locks that the application holds. For example, an
application locks a single byte of a file and proceeds to write that
single byte. A client that chose to handle a LOCKU by flushing all
modified data to the server could validly write that single byte in
response to an unrelated unlock. However, it would not be valid to
write the entire block in which that single written byte was located
since it includes an area that is not locked and might be locked by
another client. Client implementations can avoid this problem by
dividing files with modified data into those for which all
modifications are done to areas covered by an appropriate byte-range
lock and those for which there are modifications not covered by a
byte-range lock. Any writes done for the former class of files must
not include areas not locked and thus not modified on the client.
Haynes & Noveck Standards Track PAGE 149
RFC 7530 NFSv4 March 2015
10.3.3. Data Caching and Mandatory File Locking
Client-side data caching needs to respect mandatory file locking when
it is in effect. The presence of mandatory file locking for a given
file is indicated when the client gets back NFS4ERR_LOCKED from a
READ or WRITE on a file it has an appropriate share reservation for.
When mandatory locking is in effect for a file, the client must check
for an appropriate file lock for data being read or written. If a
lock exists for the range being read or written, the client may
satisfy the request using the client's validated cache. If an
appropriate file lock is not held for the range of the READ or WRITE,
the READ or WRITE request must not be satisfied by the client's cache
and the request must be sent to the server for processing. When a
READ or WRITE request partially overlaps a locked region, the request
should be subdivided into multiple pieces with each region (locked or
not) treated appropriately.
10.3.4. Data Caching and File Identity
When clients cache data, the file data needs to be organized
according to the file system object to which the data belongs. For
NFSv3 clients, the typical practice has been to assume for the
purpose of caching that distinct filehandles represent distinct file
system objects. The client then has the choice to organize and
maintain the data cache on this basis.
In the NFSv4 protocol, there is now the possibility of having
significant deviations from a "one filehandle per object" model,
because a filehandle may be constructed on the basis of the object's
pathname. Therefore, clients need a reliable method to determine if
two filehandles designate the same file system object. If clients
were simply to assume that all distinct filehandles denote distinct
objects and proceed to do data caching on this basis, caching
inconsistencies would arise between the distinct client-side objects
that mapped to the same server-side object.
By providing a method to differentiate filehandles, the NFSv4
protocol alleviates a potential functional regression in comparison
with the NFSv3 protocol. Without this method, caching
inconsistencies within the same client could occur, and this has not
been present in previous versions of the NFS protocol. Note that it
is possible to have such inconsistencies with applications executing
on multiple clients, but that is not the issue being addressed here.
Haynes & Noveck Standards Track PAGE 150
RFC 7530 NFSv4 March 2015
For the purposes of data caching, the following steps allow an NFSv4
client to determine whether two distinct filehandles denote the same
server-side object:
o If GETATTR directed to two filehandles returns different values of
the fsid attribute, then the filehandles represent distinct
objects.
o If GETATTR for any file with an fsid that matches the fsid of the
two filehandles in question returns a unique_handles attribute
with a value of TRUE, then the two objects are distinct.
o If GETATTR directed to the two filehandles does not return the
fileid attribute for both of the handles, then it cannot be
determined whether the two objects are the same. Therefore,
operations that depend on that knowledge (e.g., client-side data
caching) cannot be done reliably. Note that if GETATTR does not
return the fileid attribute for both filehandles, it will return
it for neither of the filehandles, since the fsid for both
filehandles is the same.
o If GETATTR directed to the two filehandles returns different
values for the fileid attribute, then they are distinct objects.
o Otherwise, they are the same object.
10.4. Open Delegation
When a file is being OPENed, the server may delegate further handling
of opens and closes for that file to the opening client. Any such
delegation is recallable, since the circumstances that allowed for
the delegation are subject to change. In particular, the server may
receive a conflicting OPEN from another client; the server must
recall the delegation before deciding whether the OPEN from the other
client may be granted. Making a delegation is up to the server, and
clients should not assume that any particular OPEN either will or
will not result in an open delegation. The following is a typical
set of conditions that servers might use in deciding whether OPEN
should be delegated:
o The client must be able to respond to the server's callback
requests. The server will use the CB_NULL procedure for a test of
callback ability.
o The client must have responded properly to previous recalls.
o There must be no current open conflicting with the requested
delegation.
Haynes & Noveck Standards Track PAGE 151
RFC 7530 NFSv4 March 2015
o There should be no current delegation that conflicts with the
delegation being requested.
o The probability of future conflicting open requests should be low,
based on the recent history of the file.
o The existence of any server-specific semantics of OPEN/CLOSE that
would make the required handling incompatible with the prescribed
handling that the delegated client would apply (see below).
There are two types of open delegations: OPEN_DELEGATE_READ and
OPEN_DELEGATE_WRITE. An OPEN_DELEGATE_READ delegation allows a
client to handle, on its own, requests to open a file for reading
that do not deny read access to others. It MUST, however, continue
to send all requests to open a file for writing to the server.
Multiple OPEN_DELEGATE_READ delegations may be outstanding
simultaneously and do not conflict. An OPEN_DELEGATE_WRITE
delegation allows the client to handle, on its own, all opens. Only
one OPEN_DELEGATE_WRITE delegation may exist for a given file at a
given time, and it is inconsistent with any OPEN_DELEGATE_READ
delegations.
When a single client holds an OPEN_DELEGATE_READ delegation, it is
assured that no other client may modify the contents or attributes of
the file. If more than one client holds an OPEN_DELEGATE_READ
delegation, then the contents and attributes of that file are not
allowed to change. When a client has an OPEN_DELEGATE_WRITE
delegation, it may modify the file data since no other client will be
accessing the file's data. The client holding an OPEN_DELEGATE_WRITE
delegation may only affect file attributes that are intimately
connected with the file data: size, time_modify, and change.
When a client has an open delegation, it does not send OPENs or
CLOSEs to the server but updates the appropriate status internally.
For an OPEN_DELEGATE_READ delegation, opens that cannot be handled
locally (opens for write or that deny read access) must be sent to
the server.
When an open delegation is made, the response to the OPEN contains an
open delegation structure that specifies the following:
o the type of delegation (read or write)
o space limitation information to control flushing of data on close
(OPEN_DELEGATE_WRITE delegation only; see Section 10.4.1)
Haynes & Noveck Standards Track PAGE 152
RFC 7530 NFSv4 March 2015
o an nfsace4 specifying read and write permissions
o a stateid to represent the delegation for READ and WRITE
The delegation stateid is separate and distinct from the stateid for
the OPEN proper. The standard stateid, unlike the delegation
stateid, is associated with a particular open-owner and will continue
to be valid after the delegation is recalled and the file remains
open.
When a request internal to the client is made to open a file and open
delegation is in effect, it will be accepted or rejected solely on
the basis of the following conditions. Any requirement for other
checks to be made by the delegate should result in open delegation
being denied so that the checks can be made by the server itself.
o The access and deny bits for the request and the file, as
described in Section 9.9.
o The read and write permissions, as determined below.
The nfsace4 passed with delegation can be used to avoid frequent
ACCESS calls. The permission check should be as follows:
o If the nfsace4 indicates that the open may be done, then it should
be granted without reference to the server.
o If the nfsace4 indicates that the open may not be done, then an
ACCESS request must be sent to the server to obtain the definitive
answer.
The server may return an nfsace4 that is more restrictive than the
actual ACL of the file. This includes an nfsace4 that specifies
denial of all access. Note that some common practices, such as
mapping the traditional user "root" to the user "nobody", may make it
incorrect to return the actual ACL of the file in the delegation
response.
The use of delegation, together with various other forms of caching,
creates the possibility that no server authentication will ever be
performed for a given user since all of the user's requests might be
satisfied locally. Where the client is depending on the server for
authentication, the client should be sure authentication occurs for
each user by use of the ACCESS operation. This should be the case
even if an ACCESS operation would not be required otherwise. As
mentioned before, the server may enforce frequent authentication by
returning an nfsace4 denying all access with every open delegation.
Haynes & Noveck Standards Track PAGE 153
RFC 7530 NFSv4 March 2015
10.4.1. Open Delegation and Data Caching
OPEN delegation allows much of the message overhead associated with
the opening and closing files to be eliminated. An open when an open
delegation is in effect does not require that a validation message be
sent to the server unless there exists a potential for conflict with
the requested share mode. The continued endurance of the
"OPEN_DELEGATE_READ delegation" provides a guarantee that no OPEN for
write and thus no write has occurred that did not originate from this
client. Similarly, when closing a file opened for write and if
OPEN_DELEGATE_WRITE delegation is in effect, the data written does
not have to be flushed to the server until the open delegation is
recalled. The continued endurance of the open delegation provides a
guarantee that no open and thus no read or write has been done by
another client.
For the purposes of open delegation, READs and WRITEs done without an
OPEN (anonymous and READ bypass stateids) are treated as the
functional equivalents of a corresponding type of OPEN. READs and
WRITEs done with an anonymous stateid done by another client will
force the server to recall an OPEN_DELEGATE_WRITE delegation. A
WRITE with an anonymous stateid done by another client will force a
recall of OPEN_DELEGATE_READ delegations. The handling of a READ
bypass stateid is identical, except that a READ done with a READ
bypass stateid will not force a recall of an OPEN_DELEGATE_READ
delegation.
With delegations, a client is able to avoid writing data to the
server when the CLOSE of a file is serviced. The file close system
call is the usual point at which the client is notified of a lack of
stable storage for the modified file data generated by the
application. At the close, file data is written to the server, and
through normal accounting the server is able to determine if the
available file system space for the data has been exceeded (i.e., the
server returns NFS4ERR_NOSPC or NFS4ERR_DQUOT). This accounting
includes quotas. The introduction of delegations requires that an
alternative method be in place for the same type of communication to
occur between client and server.
In the delegation response, the server provides either the limit of
the size of the file or the number of modified blocks and associated
block size. The server must ensure that the client will be able to
flush to the server data of a size equal to that provided in the
original delegation. The server must make this assurance for all
outstanding delegations. Therefore, the server must be careful in
its management of available space for new or modified data, taking
into account available file system space and any applicable quotas.
The server can recall delegations as a result of managing the
Haynes & Noveck Standards Track PAGE 154
RFC 7530 NFSv4 March 2015
available file system space. The client should abide by the server's
state space limits for delegations. If the client exceeds the stated
limits for the delegation, the server's behavior is undefined.
Based on server conditions, quotas, or available file system space,
the server may grant OPEN_DELEGATE_WRITE delegations with very
restrictive space limitations. The limitations may be defined in a
way that will always force modified data to be flushed to the server
on close.
With respect to authentication, flushing modified data to the server
after a CLOSE has occurred may be problematic. For example, the user
of the application may have logged off the client, and unexpired
authentication credentials may not be present. In this case, the
client may need to take special care to ensure that local unexpired
credentials will in fact be available. One way that this may be
accomplished is by tracking the expiration time of credentials and
flushing data well in advance of their expiration.
10.4.2. Open Delegation and File Locks
When a client holds an OPEN_DELEGATE_WRITE delegation, lock
operations may be performed locally. This includes those required
for mandatory file locking. This can be done since the delegation
implies that there can be no conflicting locks. Similarly, all of
the revalidations that would normally be associated with obtaining
locks and the flushing of data associated with the releasing of locks
need not be done.
When a client holds an OPEN_DELEGATE_READ delegation, lock operations
are not performed locally. All lock operations, including those
requesting non-exclusive locks, are sent to the server for
resolution.
10.4.3. Handling of CB_GETATTR
The server needs to employ special handling for a GETATTR where the
target is a file that has an OPEN_DELEGATE_WRITE delegation in
effect. The reason for this is that the client holding the
OPEN_DELEGATE_WRITE delegation may have modified the data, and the
server needs to reflect this change to the second client that
submitted the GETATTR. Therefore, the client holding the
OPEN_DELEGATE_WRITE delegation needs to be interrogated. The server
will use the CB_GETATTR operation. The only attributes that the
server can reliably query via CB_GETATTR are size and change.
Haynes & Noveck Standards Track PAGE 155
RFC 7530 NFSv4 March 2015
Since CB_GETATTR is being used to satisfy another client's GETATTR
request, the server only needs to know if the client holding the
delegation has a modified version of the file. If the client's copy
of the delegated file is not modified (data or size), the server can
satisfy the second client's GETATTR request from the attributes
stored locally at the server. If the file is modified, the server
only needs to know about this modified state. If the server
determines that the file is currently modified, it will respond to
the second client's GETATTR as if the file had been modified locally
at the server.
Since the form of the change attribute is determined by the server
and is opaque to the client, the client and server need to agree on a
method of communicating the modified state of the file. For the size
attribute, the client will report its current view of the file size.
For the change attribute, the handling is more involved.
For the client, the following steps will be taken when receiving an
OPEN_DELEGATE_WRITE delegation:
o The value of the change attribute will be obtained from the server
and cached. Let this value be represented by c.
o The client will create a value greater than c that will be used
for communicating that modified data is held at the client. Let
this value be represented by d.
o When the client is queried via CB_GETATTR for the change
attribute, it checks to see if it holds modified data. If the
file is modified, the value d is returned for the change attribute
value. If this file is not currently modified, the client returns
the value c for the change attribute.
For simplicity of implementation, the client MAY for each CB_GETATTR
return the same value d. This is true even if, between successive
CB_GETATTR operations, the client again modifies in the file's data
or metadata in its cache. The client can return the same value
because the only requirement is that the client be able to indicate
to the server that the client holds modified data. Therefore, the
value of d may always be c + 1.
While the change attribute is opaque to the client in the sense that
it has no idea what units of time, if any, the server is counting
change with, it is not opaque in that the client has to treat it as
an unsigned integer, and the server has to be able to see the results
of the client's changes to that integer. Therefore, the server MUST
encode the change attribute in network byte order when sending it to
the client. The client MUST decode it from network byte order to its
Haynes & Noveck Standards Track PAGE 156
RFC 7530 NFSv4 March 2015
native order when receiving it, and the client MUST encode it in
network byte order when sending it to the server. For this reason,
the change attribute is defined as an unsigned integer rather than an
opaque array of bytes.
For the server, the following steps will be taken when providing an
OPEN_DELEGATE_WRITE delegation:
o Upon providing an OPEN_DELEGATE_WRITE delegation, the server will
cache a copy of the change attribute in the data structure it uses
to record the delegation. Let this value be represented by sc.
o When a second client sends a GETATTR operation on the same file to
the server, the server obtains the change attribute from the first
client. Let this value be cc.
o If the value cc is equal to sc, the file is not modified and the
server returns the current values for change, time_metadata, and
time_modify (for example) to the second client.
o If the value cc is NOT equal to sc, the file is currently modified
at the first client and most likely will be modified at the server
at a future time. The server then uses its current time to
construct attribute values for time_metadata and time_modify. A
new value of sc, which we will call nsc, is computed by the
server, such that nsc >= sc + 1. The server then returns the
constructed time_metadata, time_modify, and nsc values to the
requester. The server replaces sc in the delegation record with
nsc. To prevent the possibility of time_modify, time_metadata,
and change from appearing to go backward (which would happen if
the client holding the delegation fails to write its modified data
to the server before the delegation is revoked or returned), the
server SHOULD update the file's metadata record with the
constructed attribute values. For reasons of reasonable
performance, committing the constructed attribute values to stable
storage is OPTIONAL.
As discussed earlier in this section, the client MAY return the same
cc value on subsequent CB_GETATTR calls, even if the file was
modified in the client's cache yet again between successive
CB_GETATTR calls. Therefore, the server must assume that the file
has been modified yet again and MUST take care to ensure that the new
nsc it constructs and returns is greater than the previous nsc it
returned. An example implementation's delegation record would
satisfy this mandate by including a boolean field (let us call it
"modified") that is set to FALSE when the delegation is granted, and
an sc value set at the time of grant to the change attribute value.
The modified field would be set to TRUE the first time cc != sc and
Haynes & Noveck Standards Track PAGE 157
RFC 7530 NFSv4 March 2015
would stay TRUE until the delegation is returned or revoked. The
processing for constructing nsc, time_modify, and time_metadata would
use this pseudo-code:
if (!modified) {
do CB_GETATTR for change and size;
if (cc != sc)
modified = TRUE;
} else {
do CB_GETATTR for size;
}
if (modified) {
sc = sc + 1;
time_modify = time_metadata = current_time;
update sc, time_modify, time_metadata into file's metadata;
}
This would return to the client (that sent GETATTR) the attributes it
requested but would make sure that size comes from what CB_GETATTR
returned. The server would not update the file's metadata with the
client's modified size.
In the case that the file attribute size is different than the
server's current value, the server treats this as a modification
regardless of the value of the change attribute retrieved via
CB_GETATTR and responds to the second client as in the last step.
This methodology resolves issues of clock differences between
client and server and other scenarios where the use of CB_GETATTR
breaks down.
It should be noted that the server is under no obligation to use
CB_GETATTR; therefore, the server MAY simply recall the delegation to
avoid its use.
10.4.4. Recall of Open Delegation
The following events necessitate the recall of an open delegation:
o Potentially conflicting OPEN request (or READ/WRITE done with
"special" stateid)
o SETATTR issued by another client
Haynes & Noveck Standards Track PAGE 158
RFC 7530 NFSv4 March 2015
o REMOVE request for the file
o RENAME request for the file as either source or target of the
RENAME
Whether a RENAME of a directory in the path leading to the file
results in the recall of an open delegation depends on the semantics
of the server file system. If that file system denies such RENAMEs
when a file is open, the recall must be performed to determine
whether the file in question is, in fact, open.
In addition to the situations above, the server may choose to recall
open delegations at any time if resource constraints make it
advisable to do so. Clients should always be prepared for the
possibility of a recall.
When a client receives a recall for an open delegation, it needs to
update state on the server before returning the delegation. These
same updates must be done whenever a client chooses to return a
delegation voluntarily. The following items of state need to be
dealt with:
o If the file associated with the delegation is no longer open and
no previous CLOSE operation has been sent to the server, a CLOSE
operation must be sent to the server.
o If a file has other open references at the client, then OPEN
operations must be sent to the server. The appropriate stateids
will be provided by the server for subsequent use by the client
since the delegation stateid will not longer be valid. These OPEN
requests are done with the claim type of CLAIM_DELEGATE_CUR. This
will allow the presentation of the delegation stateid so that the
client can establish the appropriate rights to perform the OPEN.
(See Section 16.16 for details.)
o If there are granted file locks, the corresponding LOCK operations
need to be performed. This applies to the OPEN_DELEGATE_WRITE
delegation case only.
o For an OPEN_DELEGATE_WRITE delegation, if at the time of the
recall the file is not open for write, all modified data for the
file must be flushed to the server. If the delegation had not
existed, the client would have done this data flush before the
CLOSE operation.
o For an OPEN_DELEGATE_WRITE delegation, when a file is still open
at the time of the recall, any modified data for the file needs to
be flushed to the server.
Haynes & Noveck Standards Track PAGE 159
RFC 7530 NFSv4 March 2015
o With the OPEN_DELEGATE_WRITE delegation in place, it is possible
that the file was truncated during the duration of the delegation.
For example, the truncation could have occurred as a result of an
OPEN UNCHECKED4 with a size attribute value of zero. Therefore,
if a truncation of the file has occurred and this operation has
not been propagated to the server, the truncation must occur
before any modified data is written to the server.
In the case of an OPEN_DELEGATE_WRITE delegation, file locking
imposes some additional requirements. To precisely maintain the
associated invariant, it is required to flush any modified data in
any region for which a write lock was released while the
OPEN_DELEGATE_WRITE delegation was in effect. However, because the
OPEN_DELEGATE_WRITE delegation implies no other locking by other
clients, a simpler implementation is to flush all modified data for
the file (as described just above) if any write lock has been
released while the OPEN_DELEGATE_WRITE delegation was in effect.
An implementation need not wait until delegation recall (or deciding
to voluntarily return a delegation) to perform any of the above
actions, if implementation considerations (e.g., resource
availability constraints) make that desirable. Generally, however,
the fact that the actual open state of the file may continue to
change makes it not worthwhile to send information about opens and
closes to the server, except as part of delegation return. Only in
the case of closing the open that resulted in obtaining the
delegation would clients be likely to do this early, since, in that
case, the close once done will not be undone. Regardless of the
client's choices on scheduling these actions, all must be performed
before the delegation is returned, including (when applicable) the
close that corresponds to the open that resulted in the delegation.
These actions can be performed either in previous requests or in
previous operations in the same COMPOUND request.
10.4.5. OPEN Delegation Race with CB_RECALL
The server informs the client of a recall via a CB_RECALL. A race
case that may develop is when the delegation is immediately recalled
before the COMPOUND that established the delegation is returned to
the client. As the CB_RECALL provides both a stateid and a
filehandle for which the client has no mapping, it cannot honor the
recall attempt. At this point, the client has two choices: either do
not respond or respond with NFS4ERR_BADHANDLE. If it does not
respond, then it runs the risk of the server deciding to not grant it
further delegations.
Haynes & Noveck Standards Track PAGE 160
RFC 7530 NFSv4 March 2015
If instead it does reply with NFS4ERR_BADHANDLE, then both the client
and the server might be able to detect that a race condition is
occurring. The client can keep a list of pending delegations. When
it receives a CB_RECALL for an unknown delegation, it can cache the
stateid and filehandle on a list of pending recalls. When it is
provided with a delegation, it would only use it if it was not on the
pending recall list. Upon the next CB_RECALL, it could immediately
return the delegation.
In turn, the server can keep track of when it issues a delegation and
assume that if a client responds to the CB_RECALL with an
NFS4ERR_BADHANDLE, then the client has yet to receive the delegation.
The server SHOULD give the client a reasonable time both to get this
delegation and to return it before revoking the delegation. Unlike a
failed callback path, the server should periodically probe the client
with CB_RECALL to see if it has received the delegation and is ready
to return it.
When the server finally determines that enough time has elapsed, it
SHOULD revoke the delegation and it SHOULD NOT revoke the lease.
During this extended recall process, the server SHOULD be renewing
the client lease. The intent here is that the client not pay too
onerous a burden for a condition caused by the server.
10.4.6. Clients That Fail to Honor Delegation Recalls
A client may fail to respond to a recall for various reasons, such as
a failure of the callback path from the server to the client. The
client may be unaware of a failure in the callback path. This lack
of awareness could result in the client finding out long after the
failure that its delegation has been revoked, and another client has
modified the data for which the client had a delegation. This is
especially a problem for the client that held an OPEN_DELEGATE_WRITE
delegation.
The server also has a dilemma in that the client that fails to
respond to the recall might also be sending other NFS requests,
including those that renew the lease before the lease expires.
Without returning an error for those lease-renewing operations, the
server leads the client to believe that the delegation it has is
in force.
Haynes & Noveck Standards Track PAGE 161
RFC 7530 NFSv4 March 2015
This difficulty is solved by the following rules:
o When the callback path is down, the server MUST NOT revoke the
delegation if one of the following occurs:
* The client has issued a RENEW operation, and the server has
returned an NFS4ERR_CB_PATH_DOWN error. The server MUST renew
the lease for any byte-range locks and share reservations the
client has that the server has known about (as opposed to those
locks and share reservations the client has established but not
yet sent to the server, due to the delegation). The server
SHOULD give the client a reasonable time to return its
delegations to the server before revoking the client's
delegations.
* The client has not issued a RENEW operation for some period of
time after the server attempted to recall the delegation. This
period of time MUST NOT be less than the value of the
lease_time attribute.
o When the client holds a delegation, it cannot rely on operations,
except for RENEW, that take a stateid, to renew delegation leases
across callback path failures. The client that wants to keep
delegations in force across callback path failures must use RENEW
to do so.
10.4.7. Delegation Revocation
At the point a delegation is revoked, if there are associated opens
on the client, the applications holding these opens need to be
notified. This notification usually occurs by returning errors for
READ/WRITE operations or when a close is attempted for the open file.
If no opens exist for the file at the point the delegation is
revoked, then notification of the revocation is unnecessary.
However, if there is modified data present at the client for the
file, the user of the application should be notified. Unfortunately,
it may not be possible to notify the user since active applications
may not be present at the client. See Section 10.5.1 for additional
details.
10.5. Data Caching and Revocation
When locks and delegations are revoked, the assumptions upon which
successful caching depend are no longer guaranteed. For any locks or
share reservations that have been revoked, the corresponding owner
needs to be notified. This notification includes applications with a
file open that has a corresponding delegation that has been revoked.
Haynes & Noveck Standards Track PAGE 162
RFC 7530 NFSv4 March 2015
Cached data associated with the revocation must be removed from the
client. In the case of modified data existing in the client's cache,
that data must be removed from the client without it being written to
the server. As mentioned, the assumptions made by the client are no
longer valid at the point when a lock or delegation has been revoked.
For example, another client may have been granted a conflicting lock
after the revocation of the lock at the first client. Therefore, the
data within the lock range may have been modified by the other
client. Obviously, the first client is unable to guarantee to the
application what has occurred to the file in the case of revocation.
Notification to a lock-owner will in many cases consist of simply
returning an error on the next and all subsequent READs/WRITEs to the
open file or on the close. Where the methods available to a client
make such notification impossible because errors for certain
operations may not be returned, more drastic action, such as signals
or process termination, may be appropriate. The justification for
this is that an invariant on which an application depends may be
violated. Depending on how errors are typically treated for the
client operating environment, further levels of notification,
including logging, console messages, and GUI pop-ups, may be
appropriate.
10.5.1. Revocation Recovery for Write Open Delegation
Revocation recovery for an OPEN_DELEGATE_WRITE delegation poses the
special issue of modified data in the client cache while the file is
not open. In this situation, any client that does not flush modified
data to the server on each close must ensure that the user receives
appropriate notification of the failure as a result of the
revocation. Since such situations may require human action to
correct problems, notification schemes in which the appropriate user
or administrator is notified may be necessary. Logging and console
messages are typical examples.
If there is modified data on the client, it must not be flushed
normally to the server. A client may attempt to provide a copy of
the file data as modified during the delegation under a different
name in the file system namespace to ease recovery. Note that when
the client can determine that the file has not been modified by any
other client, or when the client has a complete cached copy of the
file in question, such a saved copy of the client's view of the file
may be of particular value for recovery. In other cases, recovery
using a copy of the file, based partially on the client's cached data
and partially on the server copy as modified by other clients, will
be anything but straightforward, so clients may avoid saving file
contents in these situations or mark the results specially to warn
users of possible problems.
Haynes & Noveck Standards Track PAGE 163
RFC 7530 NFSv4 March 2015
The saving of such modified data in delegation revocation situations
may be limited to files of a certain size or might be used only when
sufficient disk space is available within the target file system.
Such saving may also be restricted to situations when the client has
sufficient buffering resources to keep the cached copy available
until it is properly stored to the target file system.
10.6. Attribute Caching
The attributes discussed in this section do not include named
attributes. Individual named attributes are analogous to files, and
caching of the data for these needs to be handled just as data
caching is for regular files. Similarly, LOOKUP results from an
OPENATTR directory are to be cached on the same basis as any other
pathnames and similarly for directory contents.
Clients may cache file attributes obtained from the server and use
them to avoid subsequent GETATTR requests. This cache is write
through caching in that any modifications to the file attributes are
always done by means of requests to the server, which means the
modifications should not be done locally and should not be cached.
Exceptions to this are modifications to attributes that are
intimately connected with data caching. Therefore, extending a file
by writing data to the local data cache is reflected immediately in
the size as seen on the client without this change being immediately
reflected on the server. Normally, such changes are not propagated
directly to the server, but when the modified data is flushed to the
server, analogous attribute changes are made on the server. When
open delegation is in effect, the modified attributes may be returned
to the server in the response to a CB_GETATTR call.
The result of local caching of attributes is that the attribute
caches maintained on individual clients will not be coherent.
Changes made in one order on the server may be seen in a different
order on one client and in a third order on a different client.
The typical file system application programming interfaces do not
provide means to atomically modify or interrogate attributes for
multiple files at the same time. The following rules provide an
environment where the potential incoherency mentioned above can be
reasonably managed. These rules are derived from the practice of
previous NFS protocols.
o All attributes for a given file (per-fsid attributes excepted) are
cached as a unit at the client so that no non-serializability can
arise within the context of a single file.
Haynes & Noveck Standards Track PAGE 164
RFC 7530 NFSv4 March 2015
o An upper time boundary is maintained on how long a client cache
entry can be kept without being refreshed from the server.
o When operations are performed that modify attributes at the
server, the updated attribute set is requested as part of the
containing RPC. This includes directory operations that update
attributes indirectly. This is accomplished by following the
modifying operation with a GETATTR operation and then using the
results of the GETATTR to update the client's cached attributes.
Note that if the full set of attributes to be cached is requested by
READDIR, the results can be cached by the client on the same basis as
attributes obtained via GETATTR.
A client may validate its cached version of attributes for a file by
only fetching both the change and time_access attributes and assuming
that if the change attribute has the same value as it did when the
attributes were cached, then no attributes other than time_access
have changed. The time_access attribute is also fetched because many
servers operate in environments where the operation that updates
change does not update time_access. For example, POSIX file
semantics do not update access time when a file is modified by the
write system call. Therefore, the client that wants a current
time_access value should fetch it with change during the attribute
cache validation processing and update its cached time_access.
The client may maintain a cache of modified attributes for those
attributes intimately connected with data of modified regular files
(size, time_modify, and change). Other than those three attributes,
the client MUST NOT maintain a cache of modified attributes.
Instead, attribute changes are immediately sent to the server.
In some operating environments, the equivalent to time_access is
expected to be implicitly updated by each read of the content of the
file object. If an NFS client is caching the content of a file
object, whether it is a regular file, directory, or symbolic link,
the client SHOULD NOT update the time_access attribute (via SETATTR
or a small READ or READDIR request) on the server with each read that
is satisfied from cache. The reason is that this can defeat the
performance benefits of caching content, especially since an explicit
SETATTR of time_access may alter the change attribute on the server.
If the change attribute changes, clients that are caching the content
will think the content has changed and will re-read unmodified data
from the server. Nor is the client encouraged to maintain a modified
version of time_access in its cache, since this would mean that the
client either will eventually have to write the access time to the
server with bad performance effects or would never update the
server's time_access, thereby resulting in a situation where an
Haynes & Noveck Standards Track PAGE 165
RFC 7530 NFSv4 March 2015
application that caches access time between a close and open of the
same file observes the access time oscillating between the past and
present. The time_access attribute always means the time of last
access to a file by a READ that was satisfied by the server. This
way, clients will tend to see only time_access changes that go
forward in time.
10.7. Data and Metadata Caching and Memory-Mapped Files
Some operating environments include the capability for an application
to map a file's content into the application's address space. Each
time the application accesses a memory location that corresponds to a
block that has not been loaded into the address space, a page fault
occurs and the file is read (or if the block does not exist in the
file, the block is allocated and then instantiated in the
application's address space).
As long as each memory-mapped access to the file requires a page
fault, the relevant attributes of the file that are used to detect
access and modification (time_access, time_metadata, time_modify, and
change) will be updated. However, in many operating environments,
when page faults are not required, these attributes will not be
updated on reads or updates to the file via memory access (regardless
of whether the file is a local file or is being accessed remotely).
A client or server MAY fail to update attributes of a file that is
being accessed via memory-mapped I/O. This has several implications:
o If there is an application on the server that has memory mapped a
file that a client is also accessing, the client may not be able
to get a consistent value of the change attribute to determine
whether its cache is stale or not. A server that knows that the
file is memory mapped could always pessimistically return updated
values for change so as to force the application to always get the
most up-to-date data and metadata for the file. However, due to
the negative performance implications of this, such behavior is
OPTIONAL.
o If the memory-mapped file is not being modified on the server and
instead is just being read by an application via the memory-mapped
interface, the client will not see an updated time_access
attribute. However, in many operating environments, neither will
any process running on the server. Thus, NFS clients are at no
disadvantage with respect to local processes.
o If there is another client that is memory mapping the file and if
that client is holding an OPEN_DELEGATE_WRITE delegation, the same
set of issues as discussed in the previous two bullet items apply.
So, when a server does a CB_GETATTR to a file that the client has
Haynes & Noveck Standards Track PAGE 166
RFC 7530 NFSv4 March 2015
modified in its cache, the response from CB_GETATTR will not
necessarily be accurate. As discussed earlier, the client's
obligation is to report that the file has been modified since the
delegation was granted, not whether it has been modified again
between successive CB_GETATTR calls, and the server MUST assume
that any file the client has modified in cache has been modified
again between successive CB_GETATTR calls. Depending on the
nature of the client's memory management system, this weak
obligation may not be possible. A client MAY return stale
information in CB_GETATTR whenever the file is memory mapped.
o The mixture of memory mapping and file locking on the same file is
problematic. Consider the following scenario, where the page size
on each client is 8192 bytes.
* Client A memory maps first page (8192 bytes) of file X.
* Client B memory maps first page (8192 bytes) of file X.
* Client A write locks first 4096 bytes.
* Client B write locks second 4096 bytes.
* Client A, via a STORE instruction, modifies part of its locked
region.
* Simultaneous to client A, client B issues a STORE on part of
its locked region.
Here, the challenge is for each client to resynchronize to get a
correct view of the first page. In many operating environments, the
virtual memory management systems on each client only know a page is
modified, not that a subset of the page corresponding to the
respective lock regions has been modified. So it is not possible for
each client to do the right thing, which is to only write to the
server that portion of the page that is locked. For example, if
client A simply writes out the page, and then client B writes out the
page, client A's data is lost.
Moreover, if mandatory locking is enabled on the file, then we have a
different problem. When clients A and B issue the STORE
instructions, the resulting page faults require a byte-range lock on
the entire page. Each client then tries to extend their locked range
to the entire page, which results in a deadlock.
Communicating the NFS4ERR_DEADLOCK error to a STORE instruction is
difficult at best.
Haynes & Noveck Standards Track PAGE 167
RFC 7530 NFSv4 March 2015
If a client is locking the entire memory-mapped file, there is no
problem with advisory or mandatory byte-range locking, at least until
the client unlocks a region in the middle of the file.
Given the above issues, the following are permitted:
o Clients and servers MAY deny memory mapping a file they know there
are byte-range locks for.
o Clients and servers MAY deny a byte-range lock on a file they know
is memory mapped.
o A client MAY deny memory mapping a file that it knows requires
mandatory locking for I/O. If mandatory locking is enabled after
the file is opened and mapped, the client MAY deny the application
further access to its mapped file.
10.8. Name Caching
The results of LOOKUP and READDIR operations may be cached to avoid
the cost of subsequent LOOKUP operations. Just as in the case of
attribute caching, inconsistencies may arise among the various client
caches. To mitigate the effects of these inconsistencies and given
the context of typical file system APIs, an upper time boundary is
maintained on how long a client name cache entry can be kept without
verifying that the entry has not been made invalid by a directory
change operation performed by another client.
When a client is not making changes to a directory for which there
exist name cache entries, the client needs to periodically fetch
attributes for that directory to ensure that it is not being
modified. After determining that no modification has occurred, the
expiration time for the associated name cache entries may be updated
to be the current time plus the name cache staleness bound.
When a client is making changes to a given directory, it needs to
determine whether there have been changes made to the directory by
other clients. It does this by using the change attribute as
reported before and after the directory operation in the associated
change_info4 value returned for the operation. The server is able to
communicate to the client whether the change_info4 data is provided
atomically with respect to the directory operation. If the change
values are provided atomically, the client is then able to compare
the pre-operation change value with the change value in the client's
name cache. If the comparison indicates that the directory was
updated by another client, the name cache associated with the
modified directory is purged from the client. If the comparison
indicates no modification, the name cache can be updated on the
Haynes & Noveck Standards Track PAGE 168
RFC 7530 NFSv4 March 2015
client to reflect the directory operation and the associated timeout
extended. The post-operation change value needs to be saved as the
basis for future change_info4 comparisons.
As demonstrated by the scenario above, name caching requires that the
client revalidate name cache data by inspecting the change attribute
of a directory at the point when the name cache item was cached.
This requires that the server update the change attribute for
directories when the contents of the corresponding directory are
modified. For a client to use the change_info4 information
appropriately and correctly, the server must report the pre- and
post-operation change attribute values atomically. When the server
is unable to report the before and after values atomically with
respect to the directory operation, the server must indicate that
fact in the change_info4 return value. When the information is not
atomically reported, the client should not assume that other clients
have not changed the directory.
10.9. Directory Caching
The results of READDIR operations may be used to avoid subsequent
READDIR operations. Just as in the cases of attribute and name
caching, inconsistencies may arise among the various client caches.
To mitigate the effects of these inconsistencies, and given the
context of typical file system APIs, the following rules should be
followed:
o Cached READDIR information for a directory that is not obtained in
a single READDIR operation must always be a consistent snapshot of
directory contents. This is determined by using a GETATTR before
the first READDIR and after the last READDIR that contributes to
the cache.
o An upper time boundary is maintained to indicate the length of
time a directory cache entry is considered valid before the client
must revalidate the cached information.
The revalidation technique parallels that discussed in the case of
name caching. When the client is not changing the directory in
question, checking the change attribute of the directory with GETATTR
is adequate. The lifetime of the cache entry can be extended at
these checkpoints. When a client is modifying the directory, the
client needs to use the change_info4 data to determine whether there
are other clients modifying the directory. If it is determined that
no other client modifications are occurring, the client may update
its directory cache to reflect its own changes.
Haynes & Noveck Standards Track PAGE 169
RFC 7530 NFSv4 March 2015
As demonstrated previously, directory caching requires that the
client revalidate directory cache data by inspecting the change
attribute of a directory at the point when the directory was cached.
This requires that the server update the change attribute for
directories when the contents of the corresponding directory are
modified. For a client to use the change_info4 information
appropriately and correctly, the server must report the pre- and
post-operation change attribute values atomically. When the server
is unable to report the before and after values atomically with
respect to the directory operation, the server must indicate that
fact in the change_info4 return value. When the information is not
atomically reported, the client should not assume that other clients
have not changed the directory.
11. Minor Versioning
To address the requirement of an NFS protocol that can evolve as the
need arises, the NFSv4 protocol contains the rules and framework to
allow for future minor changes or versioning.
The base assumption with respect to minor versioning is that any
future accepted minor version must follow the IETF process and be
documented in a Standards Track RFC. Therefore, each minor version
number will correspond to an RFC. Minor version 0 of the NFSv4
protocol is represented by this RFC. The COMPOUND and CB_COMPOUND
procedures support the encoding of the minor version being requested
by the client.
Future minor versions will extend, rather than replace, the XDR for
the preceding minor version, as had been done in moving from NFSv2 to
NFSv3 and from NFSv3 to NFSv4.0.
Specification of detailed rules for the construction of minor
versions will be addressed in documents defining early minor versions
or, more desirably, in an RFC establishing a versioning framework for
NFSv4 as a whole.
12. Internationalization
12.1. Introduction
Internationalization is a complex topic with its own set of
terminology (see [RFC 6365]). The topic is made more complex in
NFSv4.0 by the tangled history and state of NFS implementations.
This section describes what we might call "NFSv4.0
internationalization" (i.e., internationalization as implemented by
existing clients and servers) as the basis upon which NFSv4.0 clients
may implement internationalization support.
Haynes & Noveck Standards Track PAGE 170
RFC 7530 NFSv4 March 2015
This section is based on the behavior of existing implementations.
Note that the behaviors described are each demonstrated by a
combination of an NFSv4 server implementation proper and a
server-side physical file system. It is common for servers and
physical file systems to be configurable as to the behavior shown.
In the discussion below, each configuration that shows different
behavior is considered separately.
Note that in this section, the key words "MUST", "SHOULD", and "MAY"
retain their normal meanings. However, in deriving this
specification from implementation patterns, we document below how the
normative terms used derive from the behavior of existing
implementations, in those situations in which existing implementation
behavior patterns can be determined.
o Behavior implemented by all existing clients or servers is
described using "MUST", since new implementations need to follow
existing ones to be assured of interoperability. While it is
possible that different behavior might be workable, we have found
no case where this seems reasonable.
The converse holds for "MUST NOT": if a type of behavior poses
interoperability problems, it MUST NOT be implemented by any
existing clients or servers.
o Behavior implemented by most existing clients or servers, where
that behavior is more desirable than any alternative, is described
using "SHOULD", since new implementations need to follow that
existing practice unless there are strong reasons to do otherwise.
The converse holds for "SHOULD NOT".
o Behavior implemented by some, but not all, existing clients or
servers is described using "MAY", indicating that new
implementations have a choice as to whether they will behave in
that way. Thus, new implementations will have the same
flexibility that existing ones do.
o Behavior implemented by all existing clients or servers, so far as
is known -- but where there remains some uncertainty as to details
-- is described using "should". Such cases primarily concern
details of error returns. New implementations should follow
existing practice even though such situations generally do not
affect interoperability.
There are also cases in which certain server behaviors, while not
known to exist, cannot be reliably determined not to exist. In part,
this is a consequence of the long period of time that has elapsed
Haynes & Noveck Standards Track PAGE 171
RFC 7530 NFSv4 March 2015
since the publication of [RFC 3530], resulting in a situation in which
those involved in the implementation may no longer be involved in or
aware of working group activities.
In the case of possible server behavior that is neither known to
exist nor known not to exist, we use "SHOULD NOT" and "MUST NOT" as
follows, and similarly for "SHOULD" and "MUST".
o In some cases, the potential behavior is not known to exist but is
of such a nature that, if it were in fact implemented,
interoperability difficulties would be expected and reported,
giving us cause to conclude that the potential behavior is not
implemented. For such behavior, we use "MUST NOT". Similarly, we
use "MUST" to apply to the contrary behavior.
o In other cases, potential behavior is not known to exist but the
behavior, while undesirable, is not of such a nature that we are
able to draw any conclusions about its potential existence. In
such cases, we use "SHOULD NOT". Similarly, we use "SHOULD" to
apply to the contrary behavior.
In the case of a "MAY", "SHOULD", or "SHOULD NOT" that applies to
servers, clients need to be aware that there are servers that may or
may not take the specified action, and they need to be prepared for
either eventuality.
12.2. Limitations on Internationalization-Related Processing in the
NFSv4 Context
There are a number of noteworthy circumstances that limit the degree
to which internationalization-related processing can be made
universal with regard to NFSv4 clients and servers:
o The NFSv4 client is part of an extensive set of client-side
software components whose design and internal interfaces are not
within the IETF's purview, limiting the degree to which a
particular character encoding may be made standard.
o Server-side handling of file component names is typically
implemented within a server-side physical file system, whose
handling of character encoding and normalization is not
specifiable by the IETF.
o Typical implementation patterns in UNIX systems result in the
NFSv4 client having no knowledge of the character encoding being
used, which may even vary between processes on the same client
system.
Haynes & Noveck Standards Track PAGE 172
RFC 7530 NFSv4 March 2015
o Users may need access to files stored previously with non-UTF-8
encodings, or with UTF-8 encodings that do not match any
particular normalization form.
12.3. Summary of Server Behavior Types
As mentioned in Section 12.6, servers MAY reject component name
strings that are not valid UTF-8. This leads to a number of types of
valid server behavior, as outlined below. When these are combined
with the valid normalization-related behaviors as described in
Section 12.4, this leads to the combined behaviors outlined below.
o Servers that limit file component names to UTF-8 strings exist
with normalization-related handling as described in Section 12.4.
These are best described as "UTF-8-only servers".
o Servers that do not limit file component names to UTF-8 strings
are very common and are necessary to deal with clients/
applications not oriented to the use of UTF-8. Such servers
ignore normalization-related issues, and there is no way for them
to implement either normalization or representation-independent
lookups. These are best described as "UTF-8-unaware servers",
since they treat file component names as uninterpreted strings of
bytes and have no knowledge of the characters represented. See
Section 12.7 for details.
o It is possible for a server to allow component names that are not
valid UTF-8, while still being aware of the structure of UTF-8
strings. Such servers could implement either normalization or
representation-independent lookups but apply those techniques only
to valid UTF-8 strings. Such servers are not common, but it is
possible to configure at least one known server to have this
behavior. This behavior SHOULD NOT be used due to the possibility
that a filename using one character set may, by coincidence,
have the appearance of a UTF-8 filename; the results of UTF-8
normalization or representation-independent lookups are
unlikely to be correct in all cases with respect to the other
character set.
12.4. String Encoding
Strings that potentially contain characters outside the ASCII range
[RFC 20] are generally represented in NFSv4 using the UTF-8 encoding
[RFC 3629] of Unicode [UNICODE]. See [RFC 3629] for precise encoding
and decoding rules.
Haynes & Noveck Standards Track PAGE 173
RFC 7530 NFSv4 March 2015
Some details of the protocol treatment depend on the type of string:
o For strings that are component names, the preferred encoding for
any non-ASCII characters is the UTF-8 representation of Unicode.
In many cases, clients have no knowledge of the encoding being
used, with the encoding done at the user level under the control
of a per-process locale specification. As a result, it may be
impossible for the NFSv4 client to enforce the use of UTF-8. The
use of non-UTF-8 encodings can be problematic, since it may
interfere with access to files stored using other forms of name
encoding. Also, normalization-related processing (see
Section 12.5) of a string not encoded in UTF-8 could result in
inappropriate name modification or aliasing. In cases in which
one has a non-UTF-8 encoded name that accidentally conforms to
UTF-8 rules, substitution of canonically equivalent strings can
change the non-UTF-8 encoded name drastically.
The kinds of modification and aliasing mentioned here can lead to
both false negatives and false positives, depending on the strings
in question, which can result in security issues such as elevation
of privilege and denial of service (see [RFC 6943] for further
discussion).
o For strings based on domain names, non-ASCII characters MUST be
represented using the UTF-8 encoding of Unicode, and additional
string format restrictions apply. See Section 12.6 for details.
o The contents of symbolic links (of type linktext4 in the XDR) MUST
be treated as opaque data by NFSv4 servers. Although UTF-8
encoding is often used, it need not be. In this respect, the
contents of symbolic links are like the contents of regular files
in that their encoding is not within the scope of this
specification.
o For other sorts of strings, any non-ASCII characters SHOULD be
represented using the UTF-8 encoding of Unicode.
12.5. Normalization
The client and server operating environments may differ in their
policies and operational methods with respect to character
normalization (see [UNICODE] for a discussion of normalization
forms). This difference may also exist between applications on the
same client. This adds to the difficulty of providing a single
normalization policy for the protocol that allows for maximal
interoperability. This issue is similar to the issues of character
case where the server may or may not support case-insensitive
Haynes & Noveck Standards Track PAGE 174
RFC 7530 NFSv4 March 2015
filename matching and may or may not preserve the character case when
storing filenames. The protocol does not mandate a particular
behavior but allows for a range of useful behaviors.
The NFSv4 protocol does not mandate the use of a particular
normalization form at this time. A subsequent minor version of the
NFSv4 protocol might specify a particular normalization form.
Therefore, the server and client can expect that they may receive
unnormalized characters within protocol requests and responses. If
the operating environment requires normalization, then the
implementation will need to normalize the various UTF-8 encoded
strings within the protocol before presenting the information to an
application (at the client) or local file system (at the server).
Server implementations MAY normalize filenames to conform to a
particular normalization form before using the resulting string when
looking up or creating a file. Servers MAY also perform
normalization-insensitive string comparisons without modifying the
names to match a particular normalization form. Except in cases in
which component names are excluded from normalization-related
handling because they are not valid UTF-8 strings, a server MUST make
the same choice (as to whether to normalize or not, the target form
of normalization, and whether to do normalization-insensitive string
comparisons) in the same way for all accesses to a particular file
system. Servers SHOULD NOT reject a filename because it does not
conform to a particular normalization form, as this may deny access
to clients that use a different normalization form.
12.6. Types with Processing Defined by Other Internet Areas
There are two types of strings that NFSv4 deals with that are based
on domain names. Processing of such strings is defined by other
Internet standards, and hence the processing behavior for such
strings should be consistent across all server operating systems and
server file systems.
These are as follows:
o Server names as they appear in the fs_locations attribute. Note
that for most purposes, such server names will only be sent by the
server to the client. The exception is the use of the
fs_locations attribute in a VERIFY or NVERIFY operation.
o Principal suffixes that are used to denote sets of users and
groups, and are in the form of domain names.
Haynes & Noveck Standards Track PAGE 175
RFC 7530 NFSv4 March 2015
The general rules for handling all of these domain-related strings
are similar and independent of the role of the sender or receiver as
client or server, although the consequences of failure to obey these
rules may be different for client or server. The server can report
errors when it is sent invalid strings, whereas the client will
simply ignore invalid string or use a default value in their place.
The string sent SHOULD be in the form of one or more U-labels as
defined by [RFC 5890]. If that is impractical, it can instead be in
the form of one or more LDH labels [RFC 5890] or a UTF-8 domain name
that contains labels that are not properly formatted U-labels. The
receiver needs to be able to accept domain and server names in any of
the formats allowed. The server MUST reject, using the error
NFS4ERR_INVAL, a string that is not valid UTF-8, or that contains an
ASCII label that is not a valid LDH label, or that contains an
XN-label (begins with "xn--") for which the characters after "xn--"
are not valid output of the Punycode algorithm [RFC 3492].
When a domain string is part of id@domain or group@domain, there are
two possible approaches:
1. The server treats the domain string as a series of U-labels. In
cases where the domain string is a series of A-labels or
Non-Reserved LDH (NR-LDH) labels, it converts them to U-labels
using the Punycode algorithm [RFC 3492]. In cases where the
domain string is a series of other sorts of LDH labels, the
server can use the ToUnicode function defined in [RFC 3490] to
convert the string to a series of labels that generally conform
to the U-label syntax. In cases where the domain string is a
UTF-8 string that contains non-U-labels, the server can attempt
to use the ToASCII function defined in [RFC 3490] and then the
ToUnicode function on the string to convert it to a series of
labels that generally conform to the U-label syntax. As a
result, the domain string returned within a user id on a GETATTR
may not match that sent when the user id is set using SETATTR,
although when this happens, the domain will be in the form that
generally conforms to the U-label syntax.
2. The server does not attempt to treat the domain string as a
series of U-labels; specifically, it does not map a domain string
that is not a U-label into a U-label using the methods described
above. As a result, the domain string returned on a GETATTR of
the user id MUST be the same as that used when setting the
user id by the SETATTR.
A server SHOULD use the first method.
Haynes & Noveck Standards Track PAGE 176
RFC 7530 NFSv4 March 2015
For VERIFY and NVERIFY, additional string processing requirements
apply to verification of the owner and owner_group attributes; see
Section 5.9.
12.7. Errors Related to UTF-8
Where the client sends an invalid UTF-8 string, the server MAY return
an NFS4ERR_INVAL error. This includes cases in which inappropriate
prefixes are detected and where the count includes trailing bytes
that do not constitute a full Universal Multiple-Octet Coded
Character Set (UCS) character.
Requirements for server handling of component names that are not
valid UTF-8, when a server does not return NFS4ERR_INVAL in response
to receiving them, are described in Section 12.8.
Where the string supplied by the client is not rejected with
NFS4ERR_INVAL but contains characters that are not supported by the
server as a value for that string (e.g., names containing slashes, or
characters that do not fit into 16 bits when converted from UTF-8 to
a Unicode codepoint), the server should return an NFS4ERR_BADCHAR
error.
Where a UTF-8 string is used as a filename, and the file system,
while supporting all of the characters within the name, does not
allow that particular name to be used, the server should return the
error NFS4ERR_BADNAME. This includes such situations as file system
prohibitions of "." and ".." as filenames for certain operations, and
similar constraints.
12.8. Servers That Accept File Component Names That Are Not Valid UTF-8
Strings
As stated previously, servers MAY accept, on all or on some subset of
the physical file systems exported, component names that are not
valid UTF-8 strings. A typical pattern is for a server to use
UTF-8-unaware physical file systems that treat component names as
uninterpreted strings of bytes, rather than having any awareness of
the character set being used.
Such servers SHOULD NOT change the stored representation of component
names from those received on the wire and SHOULD use an octet-by-
octet comparison of component name strings to determine equivalence
(as opposed to any broader notion of string comparison). This is
because the server has no knowledge of the character encoding being
used.
Haynes & Noveck Standards Track PAGE 177
RFC 7530 NFSv4 March 2015
Nonetheless, when such a server uses a broader notion of string
equivalence than what is recommended in the preceding paragraph, the
following considerations apply:
o Outside of 7-bit ASCII, string processing that changes string
contents is usually specific to a character set and hence is
generally unsafe when the character set is unknown. This
processing could change the filename in an unexpected fashion,
rendering the file inaccessible to the application or client that
created or renamed the file and to others expecting the original
filename. Hence, such processing should not be performed, because
doing so is likely to result in incorrect string modification or
aliasing.
o Unicode normalization is particularly dangerous, as such
processing assumes that the string is UTF-8. When that assumption
is false because a different character set was used to create the
filename, normalization may corrupt the filename with respect to
that character set, rendering the file inaccessible to the
application that created it and others expecting the original
filename. Hence, Unicode normalization SHOULD NOT be performed,
because it may cause incorrect string modification or aliasing.
When the above recommendations are not followed, the resulting string
modification and aliasing can lead to both false negatives and false
positives, depending on the strings in question, which can result in
security issues such as elevation of privilege and denial of service
(see [RFC 6943] for further discussion).
13. Error Values
NFS error numbers are assigned to failed operations within a COMPOUND
or CB_COMPOUND request. A COMPOUND request contains a number of NFS
operations that have their results encoded in sequence in a COMPOUND
reply. The results of successful operations will consist of an
NFS4_OK status followed by the encoded results of the operation. If
an NFS operation fails, an error status will be entered in the reply,
and the COMPOUND request will be terminated.
Haynes & Noveck Standards Track PAGE 178
RFC 7530 NFSv4 March 2015
13.1. Error Definitions
+-----------------------------+--------+-------------------+
| Error | Number | Description |
+-----------------------------+--------+-------------------+
| NFS4_OK | 0 | Section 13.1.3.1 |
| NFS4ERR_ACCESS | 13 | Section 13.1.6.1 |
| NFS4ERR_ADMIN_REVOKED | 10047 | Section 13.1.5.1 |
| NFS4ERR_ATTRNOTSUPP | 10032 | Section 13.1.11.1 |
| NFS4ERR_BADCHAR | 10040 | Section 13.1.7.1 |
| NFS4ERR_BADHANDLE | 10001 | Section 13.1.2.1 |
| NFS4ERR_BADNAME | 10041 | Section 13.1.7.2 |
| NFS4ERR_BADOWNER | 10039 | Section 13.1.11.2 |
| NFS4ERR_BADTYPE | 10007 | Section 13.1.4.1 |
| NFS4ERR_BADXDR | 10036 | Section 13.1.1.1 |
| NFS4ERR_BAD_COOKIE | 10003 | Section 13.1.1.2 |
| NFS4ERR_BAD_RANGE | 10042 | Section 13.1.8.1 |
| NFS4ERR_BAD_SEQID | 10026 | Section 13.1.8.2 |
| NFS4ERR_BAD_STATEID | 10025 | Section 13.1.5.2 |
| NFS4ERR_CB_PATH_DOWN | 10048 | Section 13.1.12.1 |
| NFS4ERR_CLID_INUSE | 10017 | Section 13.1.10.1 |
| NFS4ERR_DEADLOCK | 10045 | Section 13.1.8.3 |
| NFS4ERR_DELAY | 10008 | Section 13.1.1.3 |
| NFS4ERR_DENIED | 10010 | Section 13.1.8.4 |
| NFS4ERR_DQUOT | 69 | Section 13.1.4.2 |
| NFS4ERR_EXIST | 17 | Section 13.1.4.3 |
| NFS4ERR_EXPIRED | 10011 | Section 13.1.5.3 |
| NFS4ERR_FBIG | 27 | Section 13.1.4.4 |
| NFS4ERR_FHEXPIRED | 10014 | Section 13.1.2.2 |
| NFS4ERR_FILE_OPEN | 10046 | Section 13.1.4.5 |
| NFS4ERR_GRACE | 10013 | Section 13.1.9.1 |
| NFS4ERR_INVAL | 22 | Section 13.1.1.4 |
| NFS4ERR_IO | 5 | Section 13.1.4.6 |
| NFS4ERR_ISDIR | 21 | Section 13.1.2.3 |
| NFS4ERR_LEASE_MOVED | 10031 | Section 13.1.5.4 |
| NFS4ERR_LOCKED | 10012 | Section 13.1.8.5 |
| NFS4ERR_LOCKS_HELD | 10037 | Section 13.1.8.6 |
| NFS4ERR_LOCK_NOTSUPP | 10043 | Section 13.1.8.7 |
| NFS4ERR_LOCK_RANGE | 10028 | Section 13.1.8.8 |
| NFS4ERR_MINOR_VERS_MISMATCH | 10021 | Section 13.1.3.2 |
| NFS4ERR_MLINK | 31 | Section 13.1.4.7 |
| NFS4ERR_MOVED | 10019 | Section 13.1.2.4 |
| NFS4ERR_NAMETOOLONG | 63 | Section 13.1.7.3 |
| NFS4ERR_NOENT | 2 | Section 13.1.4.8 |
| NFS4ERR_NOFILEHANDLE | 10020 | Section 13.1.2.5 |
| NFS4ERR_NOSPC | 28 | Section 13.1.4.9 |
| NFS4ERR_NOTDIR | 20 | Section 13.1.2.6 |
| NFS4ERR_NOTEMPTY | 66 | Section 13.1.4.10 |
Haynes & Noveck Standards Track PAGE 179
RFC 7530 NFSv4 March 2015
| NFS4ERR_NOTSUPP | 10004 | Section 13.1.1.5 |
| NFS4ERR_NOT_SAME | 10027 | Section 13.1.11.3 |
| NFS4ERR_NO_GRACE | 10033 | Section 13.1.9.2 |
| NFS4ERR_NXIO | 6 | Section 13.1.4.11 |
| NFS4ERR_OLD_STATEID | 10024 | Section 13.1.5.5 |
| NFS4ERR_OPENMODE | 10038 | Section 13.1.8.9 |
| NFS4ERR_OP_ILLEGAL | 10044 | Section 13.1.3.3 |
| NFS4ERR_PERM | 1 | Section 13.1.6.2 |
| NFS4ERR_RECLAIM_BAD | 10034 | Section 13.1.9.3 |
| NFS4ERR_RECLAIM_CONFLICT | 10035 | Section 13.1.9.4 |
| NFS4ERR_RESOURCE | 10018 | Section 13.1.3.4 |
| NFS4ERR_RESTOREFH | 10030 | Section 13.1.4.12 |
| NFS4ERR_ROFS | 30 | Section 13.1.4.13 |
| NFS4ERR_SAME | 10009 | Section 13.1.11.4 |
| NFS4ERR_SERVERFAULT | 10006 | Section 13.1.1.6 |
| NFS4ERR_SHARE_DENIED | 10015 | Section 13.1.8.10 |
| NFS4ERR_STALE | 70 | Section 13.1.2.7 |
| NFS4ERR_STALE_CLIENTID | 10022 | Section 13.1.10.2 |
| NFS4ERR_STALE_STATEID | 10023 | Section 13.1.5.6 |
| NFS4ERR_SYMLINK | 10029 | Section 13.1.2.8 |
| NFS4ERR_TOOSMALL | 10005 | Section 13.1.1.7 |
| NFS4ERR_WRONGSEC | 10016 | Section 13.1.6.3 |
| NFS4ERR_XDEV | 18 | Section 13.1.4.14 |
+-----------------------------+--------+-------------------+
Table 6: Protocol Error Definitions
13.1.1. General Errors
This section deals with errors that are applicable to a broad set of
different purposes.
13.1.1.1. NFS4ERR_BADXDR (Error Code 10036)
The arguments for this operation do not match those specified in the
XDR definition. This includes situations in which the request ends
before all the arguments have been seen. Note that this error
applies when fixed enumerations (these include booleans) have a value
within the input stream that is not valid for the enum. A replier
may pre-parse all operations for a COMPOUND procedure before doing
any operation execution and return RPC-level XDR errors in that case.
13.1.1.2. NFS4ERR_BAD_COOKIE (Error Code 10003)
This error is used for operations that provide a set of information
indexed by some quantity provided by the client or cookie sent by the
server for an earlier invocation. Where the value cannot be used for
its intended purpose, this error results.
Haynes & Noveck Standards Track PAGE 180
RFC 7530 NFSv4 March 2015
13.1.1.3. NFS4ERR_DELAY (Error Code 10008)
For any of a number of reasons, the replier could not process this
operation in what was deemed a reasonable time. The client should
wait and then try the request with a new RPC transaction ID.
The following are two examples of what might lead to this situation:
o A server that supports hierarchical storage receives a request to
process a file that had been migrated.
o An operation requires a delegation recall to proceed, and waiting
for this delegation recall makes processing this request in a
timely fashion impossible.
13.1.1.4. NFS4ERR_INVAL (Error Code 22)
The arguments for this operation are not valid for some reason, even
though they do match those specified in the XDR definition for the
request.
13.1.1.5. NFS4ERR_NOTSUPP (Error Code 10004)
The operation is not supported, either because the operation is an
OPTIONAL one and is not supported by this server or because the
operation MUST NOT be implemented in the current minor version.
13.1.1.6. NFS4ERR_SERVERFAULT (Error Code 10006)
An error that does not map to any of the specific legal NFSv4
protocol error values occurred on the server. The client should
translate this into an appropriate error. UNIX clients may choose to
translate this to EIO.
13.1.1.7. NFS4ERR_TOOSMALL (Error Code 10005)
This error is used where an operation returns a variable amount of
data, with a limit specified by the client. Where the data returned
cannot be fitted within the limit specified by the client, this error
results.
13.1.2. Filehandle Errors
These errors deal with the situation in which the current or saved
filehandle, or the filehandle passed to PUTFH intended to become the
current filehandle, is invalid in some way. This includes situations
in which the filehandle is a valid filehandle in general but is not
of the appropriate object type for the current operation.
Haynes & Noveck Standards Track PAGE 181
RFC 7530 NFSv4 March 2015
Where the error description indicates a problem with the current or
saved filehandle, it is to be understood that filehandles are only
checked for the condition if they are implicit arguments of the
operation in question.
13.1.2.1. NFS4ERR_BADHANDLE (Error Code 10001)
This error is generated for an illegal NFS filehandle for the current
server. The current filehandle failed internal consistency checks.
Once accepted as valid (by PUTFH), no subsequent status change can
cause the filehandle to generate this error.
13.1.2.2. NFS4ERR_FHEXPIRED (Error Code 10014)
A current or saved filehandle that is an argument to the current
operation is volatile and has expired at the server.
13.1.2.3. NFS4ERR_ISDIR (Error Code 21)
The current or saved filehandle designates a directory when the
current operation does not allow a directory to be accepted as the
target of this operation.
13.1.2.4. NFS4ERR_MOVED (Error Code 10019)
The file system that contains the current filehandle object is not
present at the server. It may have been relocated or migrated to
another server, or may have never been present. The client may
obtain the new file system location by obtaining the "fs_locations"
attribute for the current filehandle. For further discussion, refer
to Section 8.
13.1.2.5. NFS4ERR_NOFILEHANDLE (Error Code 10020)
The logical current or saved filehandle value is required by the
current operation and is not set. This may be a result of a
malformed COMPOUND operation (i.e., no PUTFH or PUTROOTFH before an
operation that requires that the current filehandle be set).
13.1.2.6. NFS4ERR_NOTDIR (Error Code 20)
The current (or saved) filehandle designates an object that is not a
directory for an operation in which a directory is required.
Haynes & Noveck Standards Track PAGE 182
RFC 7530 NFSv4 March 2015
13.1.2.7. NFS4ERR_STALE (Error Code 70)
The current or saved filehandle value designating an argument to the
current operation is invalid. The file system object referred to by
that filehandle no longer exists, or access to it has been revoked.
13.1.2.8. NFS4ERR_SYMLINK (Error Code 10029)
The current filehandle designates a symbolic link when the current
operation does not allow a symbolic link as the target.
13.1.3. Compound Structure Errors
This section deals with errors that relate to the overall structure
of a COMPOUND request (by which we mean to include both COMPOUND and
CB_COMPOUND), rather than to particular operations.
There are a number of basic constraints on the operations that may
appear in a COMPOUND request.
13.1.3.1. NFS_OK (Error Code 0)
NFS_OK indicates that the operation completed successfully, in that
all of the constituent operations completed without error.
13.1.3.2. NFS4ERR_MINOR_VERS_MISMATCH (Error Code 10021)
The minor version specified is not one that the current listener
supports. This value is returned in the overall status for the
COMPOUND procedure but is not associated with a specific operation,
since the results must specify a result count of zero.
13.1.3.3. NFS4ERR_OP_ILLEGAL (Error Code 10044)
The operation code is not a valid one for the current COMPOUND
procedure. The opcode in the result stream matched with this error
is the ILLEGAL value, although the value that appears in the request
stream may be different. Where an illegal value appears and the
replier pre-parses all operations for a COMPOUND procedure before
doing any operation execution, an RPC-level XDR error may be returned
in this case.
Haynes & Noveck Standards Track PAGE 183
RFC 7530 NFSv4 March 2015
13.1.3.4. NFS4ERR_RESOURCE (Error Code 10018)
For the processing of the COMPOUND procedure, the server may exhaust
available resources and cannot continue processing operations within
the COMPOUND procedure. This error will be returned from the server
in those instances of resource exhaustion related to the processing
of the COMPOUND procedure.
13.1.4. File System Errors
These errors describe situations that occurred in the underlying file
system implementation rather than in the protocol or any NFSv4.x
feature.
13.1.4.1. NFS4ERR_BADTYPE (Error Code 10007)
An attempt was made to create an object with an inappropriate type
specified to CREATE. This may be because the type is undefined;
because it is a type not supported by the server; or because it is a
type for which create is not intended, such as a regular file or
named attribute, for which OPEN is used to do the file creation.
13.1.4.2. NFS4ERR_DQUOT (Error Code 69)
The resource (quota) hard limit has been exceeded. The user's
resource limit on the server has been exceeded.
13.1.4.3. NFS4ERR_EXIST (Error Code 17)
A file system object of the specified target name (when creating,
renaming, or linking) already exists.
13.1.4.4. NFS4ERR_FBIG (Error Code 27)
The file system object is too large. The operation would have caused
a file system object to grow beyond the server's limit.
13.1.4.5. NFS4ERR_FILE_OPEN (Error Code 10046)
The operation is not allowed because a file system object involved in
the operation is currently open. Servers may, but are not required
to, disallow linking to, removing, or renaming open file system
objects.
13.1.4.6. NFS4ERR_IO (Error Code 5)
This indicates that an I/O error occurred for which the file system
was unable to provide recovery.
Haynes & Noveck Standards Track PAGE 184
RFC 7530 NFSv4 March 2015
13.1.4.7. NFS4ERR_MLINK (Error Code 31)
The request would have caused the server's limit for the number of
hard links a file system object may have to be exceeded.
13.1.4.8. NFS4ERR_NOENT (Error Code 2)
This indicates no such file or directory. The file system object
referenced by the name specified does not exist.
13.1.4.9. NFS4ERR_NOSPC (Error Code 28)
This indicates no space left on the device. The operation would have
caused the server's file system to exceed its limit.
13.1.4.10. NFS4ERR_NOTEMPTY (Error Code 66)
An attempt was made to remove a directory that was not empty.
13.1.4.11. NFS4ERR_NXIO (Error Code 6)
This indicates an I/O error. There is no such device or address.
13.1.4.12. NFS4ERR_RESTOREFH (Error Code 10030)
The RESTOREFH operation does not have a saved filehandle (identified
by SAVEFH) to operate upon.
13.1.4.13. NFS4ERR_ROFS (Error Code 30)
This indicates a read-only file system. A modifying operation was
attempted on a read-only file system.
13.1.4.14. NFS4ERR_XDEV (Error Code 18)
This indicates an attempt to do an operation, such as linking, that
inappropriately crosses a boundary. For example, this may be due to
a boundary between:
o File systems (where the fsids are different).
o Different named attribute directories, or between a named
attribute directory and an ordinary directory.
o Regions of a file system that the file system implementation
treats as separate (for example, for space accounting purposes),
and where cross-connection between the regions is not allowed.
Haynes & Noveck Standards Track PAGE 185
RFC 7530 NFSv4 March 2015
13.1.5. State Management Errors
These errors indicate problems with the stateid (or one of the
stateids) passed to a given operation. This includes situations in
which the stateid is invalid, as well as situations in which the
stateid is valid but designates revoked locking state. Depending on
the operation, the stateid, when valid, may designate opens,
byte-range locks, or file delegations.
13.1.5.1. NFS4ERR_ADMIN_REVOKED (Error Code 10047)
A stateid designates locking state of any type that has been revoked
due to administrative interaction, possibly while the lease is valid,
or because a delegation was revoked because of failure to return it,
while the lease was valid.
13.1.5.2. NFS4ERR_BAD_STATEID (Error Code 10025)
A stateid generated by the current server instance was used that
either:
o Does not designate any locking state (either current or
superseded) for a current (state-owner, file) pair.
o Designates locking state that was freed after lease expiration but
without any lease cancellation, as may happen in the handling of
"courtesy locks".
13.1.5.3. NFS4ERR_EXPIRED (Error Code 10011)
A stateid or clientid designates locking state of any type that has
been revoked or released due to cancellation of the client's lease,
either immediately upon lease expiration, or following a later
request for a conflicting lock.
13.1.5.4. NFS4ERR_LEASE_MOVED (Error Code 10031)
A lease being renewed is associated with a file system that has been
migrated to a new server.
13.1.5.5. NFS4ERR_OLD_STATEID (Error Code 10024)
A stateid is provided with a seqid value that is not the most
current.
13.1.5.6. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used.
Haynes & Noveck Standards Track PAGE 186
RFC 7530 NFSv4 March 2015
13.1.6. Security Errors
These are the various permission-related errors in NFSv4.
13.1.6.1. NFS4ERR_ACCESS (Error Code 13)
This indicates permission denied. The caller does not have the
correct permission to perform the requested operation. Contrast this
with NFS4ERR_PERM (Section 13.1.6.2), which restricts itself to owner
or privileged user permission failures.
13.1.6.2. NFS4ERR_PERM (Error Code 1)
This indicates that the requester is not the owner. The operation
was not allowed because the caller is neither a privileged user
(root) nor the owner of the target of the operation.
13.1.6.3. NFS4ERR_WRONGSEC (Error Code 10016)
This indicates that the security mechanism being used by the client
for the operation does not match the server's security policy. The
client should change the security mechanism being used and re-send
the operation. SECINFO can be used to determine the appropriate
mechanism.
13.1.7. Name Errors
Names in NFSv4 are UTF-8 strings. When the strings are not of length
zero, the error NFS4ERR_INVAL results. When they are not valid
UTF-8, the error NFS4ERR_INVAL also results, but servers may
accommodate file systems with different character formats and not
return this error. Besides this, there are a number of other errors
to indicate specific problems with names.
13.1.7.1. NFS4ERR_BADCHAR (Error Code 10040)
A UTF-8 string contains a character that is not supported by the
server in the context in which it is being used.
13.1.7.2. NFS4ERR_BADNAME (Error Code 10041)
A name string in a request consisted of valid UTF-8 characters
supported by the server, but the name is not supported by the server
as a valid name for current operation. An example might be creating
a file or directory named ".." on a server whose file system uses
that name for links to parent directories.
Haynes & Noveck Standards Track PAGE 187
RFC 7530 NFSv4 March 2015
This error should not be returned due to a normalization issue in a
string. When a file system keeps names in a particular normalization
form, it is the server's responsibility to do the appropriate
normalization, rather than rejecting the name.
13.1.7.3. NFS4ERR_NAMETOOLONG (Error Code 63)
This is returned when the filename in an operation exceeds the
server's implementation limit.
13.1.8. Locking Errors
This section deals with errors related to locking -- both share
reservations and byte-range locking. It does not deal with errors
specific to the process of reclaiming locks. Those are dealt with in
the next section.
13.1.8.1. NFS4ERR_BAD_RANGE (Error Code 10042)
The range for a LOCK, LOCKT, or LOCKU operation is not appropriate to
the allowable range of offsets for the server. For example, this
error results when a server that only supports 32-bit ranges receives
a range that cannot be handled by that server. (See
Section 16.10.4.)
13.1.8.2. NFS4ERR_BAD_SEQID (Error Code 10026)
The sequence number (seqid) in a locking request is neither the next
expected number nor the last number processed.
13.1.8.3. NFS4ERR_DEADLOCK (Error Code 10045)
The server has been able to determine a file locking deadlock
condition for a blocking lock request.
13.1.8.4. NFS4ERR_DENIED (Error Code 10010)
An attempt to lock a file is denied. Since this may be a temporary
condition, the client is encouraged to re-send the lock request until
the lock is accepted. See Section 9.4 for a discussion of the
re-send.
Haynes & Noveck Standards Track PAGE 188
RFC 7530 NFSv4 March 2015
13.1.8.5. NFS4ERR_LOCKED (Error Code 10012)
A READ or WRITE operation was attempted on a file where there was a
conflict between the I/O and an existing lock:
o There is a share reservation inconsistent with the I/O being done.
o The range to be read or written intersects an existing mandatory
byte-range lock.
13.1.8.6. NFS4ERR_LOCKS_HELD (Error Code 10037)
An operation was prevented by the unexpected presence of locks.
13.1.8.7. NFS4ERR_LOCK_NOTSUPP (Error Code 10043)
A locking request was attempted that would require the upgrade or
downgrade of a lock range already held by the owner when the server
does not support atomic upgrade or downgrade of locks.
13.1.8.8. NFS4ERR_LOCK_RANGE (Error Code 10028)
A lock request is operating on a range that partially overlaps a
currently held lock for the current lock-owner and does not precisely
match a single such lock, where the server does not support this type
of request and thus does not implement POSIX locking semantics
[fcntl]. See Sections 16.10.5, 16.11.5, and 16.12.5 for a discussion
of how this applies to LOCK, LOCKT, and LOCKU, respectively.
13.1.8.9. NFS4ERR_OPENMODE (Error Code 10038)
The client attempted a READ, WRITE, LOCK, or other operation not
sanctioned by the stateid passed (e.g., writing to a file opened only
for read).
13.1.8.10. NFS4ERR_SHARE_DENIED (Error Code 10015)
An attempt to OPEN a file with a share reservation has failed because
of a share conflict.
Haynes & Noveck Standards Track PAGE 189
RFC 7530 NFSv4 March 2015
13.1.9. Reclaim Errors
These errors relate to the process of reclaiming locks after a server
restart.
13.1.9.1. NFS4ERR_GRACE (Error Code 10013)
The server is in its recovery or grace period, which should at least
match the lease period of the server. A locking request other than a
reclaim could not be granted during that period.
13.1.9.2. NFS4ERR_NO_GRACE (Error Code 10033)
The server cannot guarantee that it has not granted state to another
client that may conflict with this client's state. No further
reclaims from this client will succeed.
13.1.9.3. NFS4ERR_RECLAIM_BAD (Error Code 10034)
The server cannot guarantee that it has not granted state to another
client that may conflict with the requested state. However, this
applies only to the state requested in this call; further reclaims
may succeed.
Unlike NFS4ERR_RECLAIM_CONFLICT, this can occur between correctly
functioning clients and servers: the "edge condition" scenarios
described in Section 9.6.3.4 leave only the server knowing whether
the client's locks are still valid, and NFS4ERR_RECLAIM_BAD is the
server's way of informing the client that they are not.
13.1.9.4. NFS4ERR_RECLAIM_CONFLICT (Error Code 10035)
The reclaim attempted by the client conflicts with a lock already
held by another client. Unlike NFS4ERR_RECLAIM_BAD, this can only
occur if one of the clients misbehaved.
Haynes & Noveck Standards Track PAGE 190
RFC 7530 NFSv4 March 2015
13.1.10. Client Management Errors
This section deals with errors associated with requests used to
create and manage client IDs.
13.1.10.1. NFS4ERR_CLID_INUSE (Error Code 10017)
The SETCLIENTID operation has found that a clientid is already in use
by another client.
13.1.10.2. NFS4ERR_STALE_CLIENTID (Error Code 10022)
A client ID not recognized by the server was used in a locking or
SETCLIENTID_CONFIRM request.
13.1.11. Attribute Handling Errors
This section deals with errors specific to attribute handling within
NFSv4.
13.1.11.1. NFS4ERR_ATTRNOTSUPP (Error Code 10032)
An attribute specified is not supported by the server. This error
MUST NOT be returned by the GETATTR operation.
13.1.11.2. NFS4ERR_BADOWNER (Error Code 10039)
This error is returned when an owner or owner_group attribute value
or the who field of an ace within an ACL attribute value cannot be
translated to a local representation.
13.1.11.3. NFS4ERR_NOT_SAME (Error Code 10027)
This error is returned by the VERIFY operation to signify that the
attributes compared were not the same as those provided in the
client's request.
13.1.11.4. NFS4ERR_SAME (Error Code 10009)
This error is returned by the NVERIFY operation to signify that the
attributes compared were the same as those provided in the client's
request.
13.1.12. Miscellaneous Errors
13.1.12.1. NFS4ERR_CB_PATH_DOWN (Error Code 10048)
There is a problem contacting the client via the callback path.
Haynes & Noveck Standards Track PAGE 191
RFC 7530 NFSv4 March 2015
13.2. Operations and Their Valid Errors
This section contains a table that gives the valid error returns for
each protocol operation. The error code NFS4_OK (indicating no
error) is not listed but should be understood to be returnable by all
operations except ILLEGAL.
+---------------------+---------------------------------------------+
| Operation | Errors |
+---------------------+---------------------------------------------+
| ACCESS | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, |
| | NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE |
| | |
| CLOSE | NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BAD_SEQID, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_INVAL, NFS4ERR_ISDIR, |
| | NFS4ERR_LEASE_MOVED, NFS4ERR_LOCKS_HELD, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_OLD_STATEID, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_STATEID |
| | |
| COMMIT | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, |
| | NFS4ERR_IO, NFS4ERR_ISDIR, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_RESOURCE, |
| | NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_SYMLINK |
| | |
| CREATE | NFS4ERR_ACCESS, NFS4ERR_ATTRNOTSUPP, |
| | NFS4ERR_BADCHAR, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADNAME, NFS4ERR_BADOWNER, |
| | NFS4ERR_BADTYPE, NFS4ERR_BADXDR, |
| | NFS4ERR_DELAY, NFS4ERR_DQUOT, |
| | NFS4ERR_EXIST, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NAMETOOLONG, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NOSPC, NFS4ERR_NOTDIR, |
| | NFS4ERR_PERM, NFS4ERR_RESOURCE, |
| | NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE |
Haynes & Noveck Standards Track PAGE 192
RFC 7530 NFSv4 March 2015
| | |
| DELEGPURGE | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_LEASE_MOVED, NFS4ERR_NOTSUPP, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE_CLIENTID |
| | |
| DELEGRETURN | NFS4ERR_ADMIN_REVOKED, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_EXPIRED, NFS4ERR_INVAL, |
| | NFS4ERR_LEASE_MOVED, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTSUPP, |
| | NFS4ERR_OLD_STATEID, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_STATEID |
| | |
| GETATTR | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE |
| | |
| GETFH | NFS4ERR_BADHANDLE, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE |
| | |
| ILLEGAL | NFS4ERR_BADXDR, NFS4ERR_OP_ILLEGAL |
| | |
| LINK | NFS4ERR_ACCESS, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADNAME, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_DQUOT, NFS4ERR_EXIST, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_FILE_OPEN, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_ISDIR, |
| | NFS4ERR_MLINK, NFS4ERR_MOVED, |
| | NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, |
| | NFS4ERR_NOTDIR, NFS4ERR_NOTSUPP, |
| | NFS4ERR_RESOURCE, NFS4ERR_ROFS, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_WRONGSEC, NFS4ERR_XDEV |
| | |
Haynes & Noveck Standards Track PAGE 193
RFC 7530 NFSv4 March 2015
| LOCK | NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BAD_RANGE, |
| | NFS4ERR_BAD_SEQID, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DEADLOCK, |
| | NFS4ERR_DELAY, NFS4ERR_DENIED, |
| | NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, |
| | NFS4ERR_ISDIR, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_LOCK_NOTSUPP, NFS4ERR_LOCK_RANGE, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NO_GRACE, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_OPENMODE, NFS4ERR_RECLAIM_BAD, |
| | NFS4ERR_RECLAIM_CONFLICT, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_CLIENTID, |
| | NFS4ERR_STALE_STATEID |
| | |
| LOCKT | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BAD_RANGE, NFS4ERR_BADXDR, |
| | NFS4ERR_DELAY, NFS4ERR_DENIED, |
| | NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, |
| | NFS4ERR_ISDIR, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_LOCK_RANGE, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_CLIENTID |
| | |
| LOCKU | NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BAD_RANGE, |
| | NFS4ERR_BAD_SEQID, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, |
| | NFS4ERR_ISDIR, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_LOCK_RANGE, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_STALE_STATEID |
| | |
Haynes & Noveck Standards Track PAGE 194
RFC 7530 NFSv4 March 2015
| LOOKUP | NFS4ERR_ACCESS, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADNAME, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, |
| | NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_SYMLINK, |
| | NFS4ERR_WRONGSEC |
| | |
| LOOKUPP | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOENT, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_SYMLINK, |
| | NFS4ERR_WRONGSEC |
| | |
| NVERIFY | NFS4ERR_ACCESS, NFS4ERR_ATTRNOTSUPP, |
| | NFS4ERR_BADCHAR, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_SAME, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE |
| | |
| OPEN | NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, |
| | NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADNAME, |
| | NFS4ERR_BADOWNER, NFS4ERR_BAD_SEQID, |
| | NFS4ERR_BAD_STATEID, NFS4ERR_BADXDR, |
| | NFS4ERR_DELAY, NFS4ERR_DQUOT, |
| | NFS4ERR_EXIST, NFS4ERR_EXPIRED, |
| | NFS4ERR_FBIG, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, |
| | NFS4ERR_ISDIR, NFS4ERR_MOVED, |
| | NFS4ERR_NAMETOOLONG, NFS4ERR_NOENT, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NO_GRACE, |
| | NFS4ERR_NOSPC, NFS4ERR_NOTDIR, |
| | NFS4ERR_NOTSUPP, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_PERM, NFS4ERR_RECLAIM_BAD, |
| | NFS4ERR_RECLAIM_CONFLICT, NFS4ERR_RESOURCE, |
| | NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_SHARE_DENIED, NFS4ERR_STALE, |
| | NFS4ERR_STALE_CLIENTID, NFS4ERR_SYMLINK, |
| | NFS4ERR_WRONGSEC |
| | |
Haynes & Noveck Standards Track PAGE 195
RFC 7530 NFSv4 March 2015
| OPENATTR | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_DQUOT, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_IO, NFS4ERR_MOVED, NFS4ERR_NOENT, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, |
| | NFS4ERR_NOTSUPP, NFS4ERR_RESOURCE, |
| | NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE |
| | |
| OPEN_CONFIRM | NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BAD_SEQID, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_EXPIRED, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, |
| | NFS4ERR_ISDIR, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_OLD_STATEID, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_STATEID |
| | |
| OPEN_DOWNGRADE | NFS4ERR_ADMIN_REVOKED, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BAD_SEQID, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_INVAL, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_LOCKS_HELD, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_RESOURCE, NFS4ERR_ROFS, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_STATEID |
| | |
| PUTFH | NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, |
| | NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_MOVED, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_WRONGSEC |
| | |
| PUTPUBFH | NFS4ERR_DELAY, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_WRONGSEC |
| | |
| PUTROOTFH | NFS4ERR_DELAY, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_WRONGSEC |
| | |
Haynes & Noveck Standards Track PAGE 196
RFC 7530 NFSv4 March 2015
| READ | NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_EXPIRED, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, |
| | NFS4ERR_ISDIR, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_LOCKED, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_OPENMODE, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_STATEID, NFS4ERR_SYMLINK |
| | |
| READDIR | NFS4ERR_ACCESS, NFS4ERR_BAD_COOKIE, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, |
| | NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOTDIR, |
| | NFS4ERR_NOT_SAME, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_TOOSMALL |
| | |
| READLINK | NFS4ERR_ACCESS, NFS4ERR_BADHANDLE, |
| | NFS4ERR_DELAY, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_ISDIR, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NOTSUPP, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE |
| | |
| RELEASE_LOCKOWNER | NFS4ERR_BADXDR, NFS4ERR_EXPIRED, |
| | NFS4ERR_LEASE_MOVED, NFS4ERR_LOCKS_HELD, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE_CLIENTID |
| | |
| REMOVE | NFS4ERR_ACCESS, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADNAME, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_FILE_OPEN, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, |
| | NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, |
| | NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NOTDIR, NFS4ERR_NOTEMPTY, |
| | NFS4ERR_RESOURCE, NFS4ERR_ROFS, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE |
| | |
Haynes & Noveck Standards Track PAGE 197
RFC 7530 NFSv4 March 2015
| RENAME | NFS4ERR_ACCESS, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADNAME, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_DQUOT, NFS4ERR_EXIST, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_FILE_OPEN, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, |
| | NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, |
| | NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NOSPC, NFS4ERR_NOTDIR, |
| | NFS4ERR_NOTEMPTY, NFS4ERR_RESOURCE, |
| | NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_WRONGSEC, |
| | NFS4ERR_XDEV |
| | |
| RENEW | NFS4ERR_ACCESS, NFS4ERR_BADXDR, |
| | NFS4ERR_CB_PATH_DOWN, NFS4ERR_EXPIRED, |
| | NFS4ERR_LEASE_MOVED, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE_CLIENTID |
| | |
| RESTOREFH | NFS4ERR_BADHANDLE, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_MOVED, NFS4ERR_RESOURCE, |
| | NFS4ERR_RESTOREFH, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_WRONGSEC |
| | |
| SAVEFH | NFS4ERR_BADHANDLE, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE |
| | |
| SECINFO | NFS4ERR_ACCESS, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADNAME, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_INVAL, |
| | NFS4ERR_MOVED, NFS4ERR_NAMETOOLONG, |
| | NFS4ERR_NOENT, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NOTDIR, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE |
| | |
Haynes & Noveck Standards Track PAGE 198
RFC 7530 NFSv4 March 2015
| SETATTR | NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, |
| | NFS4ERR_ATTRNOTSUPP, NFS4ERR_BADCHAR, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BADOWNER, |
| | NFS4ERR_BAD_STATEID, NFS4ERR_BADXDR, |
| | NFS4ERR_DELAY, NFS4ERR_DQUOT, |
| | NFS4ERR_EXPIRED, NFS4ERR_FBIG, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_ISDIR, |
| | NFS4ERR_LEASE_MOVED, NFS4ERR_LOCKED, |
| | NFS4ERR_MOVED, NFS4ERR_NOFILEHANDLE, |
| | NFS4ERR_NOSPC, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_OPENMODE, NFS4ERR_PERM, |
| | NFS4ERR_RESOURCE, NFS4ERR_ROFS, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE, |
| | NFS4ERR_STALE_STATEID |
| | |
| SETCLIENTID | NFS4ERR_BADXDR, NFS4ERR_CLID_INUSE, |
| | NFS4ERR_DELAY, NFS4ERR_INVAL, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT |
| | |
| SETCLIENTID_CONFIRM | NFS4ERR_BADXDR, NFS4ERR_CLID_INUSE, |
| | NFS4ERR_DELAY, NFS4ERR_RESOURCE, |
| | NFS4ERR_SERVERFAULT, NFS4ERR_STALE_CLIENTID |
| | |
| VERIFY | NFS4ERR_ACCESS, NFS4ERR_ATTRNOTSUPP, |
| | NFS4ERR_BADCHAR, NFS4ERR_BADHANDLE, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_FHEXPIRED, NFS4ERR_GRACE, |
| | NFS4ERR_INVAL, NFS4ERR_IO, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOT_SAME, |
| | NFS4ERR_RESOURCE, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE |
| | |
Haynes & Noveck Standards Track PAGE 199
RFC 7530 NFSv4 March 2015
| WRITE | NFS4ERR_ACCESS, NFS4ERR_ADMIN_REVOKED, |
| | NFS4ERR_BADHANDLE, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_DQUOT, NFS4ERR_EXPIRED, |
| | NFS4ERR_FBIG, NFS4ERR_FHEXPIRED, |
| | NFS4ERR_GRACE, NFS4ERR_INVAL, NFS4ERR_IO, |
| | NFS4ERR_ISDIR, NFS4ERR_LEASE_MOVED, |
| | NFS4ERR_LOCKED, NFS4ERR_MOVED, |
| | NFS4ERR_NOFILEHANDLE, NFS4ERR_NOSPC, |
| | NFS4ERR_NXIO, NFS4ERR_OLD_STATEID, |
| | NFS4ERR_OPENMODE, NFS4ERR_RESOURCE, |
| | NFS4ERR_ROFS, NFS4ERR_SERVERFAULT, |
| | NFS4ERR_STALE, NFS4ERR_STALE_STATEID, |
| | NFS4ERR_SYMLINK |
| | |
+---------------------+---------------------------------------------+
Table 7: Valid Error Returns for Each Protocol Operation
13.3. Callback Operations and Their Valid Errors
This section contains a table that gives the valid error returns for
each callback operation. The error code NFS4_OK (indicating no
error) is not listed but should be understood to be returnable by all
callback operations, with the exception of CB_ILLEGAL.
+-------------+-----------------------------------------------------+
| Callback | Errors |
| Operation | |
+-------------+-----------------------------------------------------+
| CB_GETATTR | NFS4ERR_BADHANDLE, NFS4ERR_BADXDR, NFS4ERR_DELAY, |
| | NFS4ERR_INVAL, NFS4ERR_SERVERFAULT |
| | |
| CB_ILLEGAL | NFS4ERR_BADXDR, NFS4ERR_OP_ILLEGAL |
| | |
| CB_RECALL | NFS4ERR_BADHANDLE, NFS4ERR_BAD_STATEID, |
| | NFS4ERR_BADXDR, NFS4ERR_DELAY, NFS4ERR_SERVERFAULT |
| | |
+-------------+-----------------------------------------------------+
Table 8: Valid Error Returns for Each Protocol Callback Operation
Haynes & Noveck Standards Track PAGE 200
RFC 7530 NFSv4 March 2015
13.4. Errors and the Operations That Use Them
+--------------------------+----------------------------------------+
| Error | Operations |
+--------------------------+----------------------------------------+
| NFS4ERR_ACCESS | ACCESS, COMMIT, CREATE, GETATTR, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, READ, |
| | READDIR, READLINK, REMOVE, RENAME, |
| | RENEW, SECINFO, SETATTR, VERIFY, WRITE |
| | |
| NFS4ERR_ADMIN_REVOKED | CLOSE, DELEGRETURN, LOCK, LOCKU, OPEN, |
| | OPEN_CONFIRM, OPEN_DOWNGRADE, READ, |
| | SETATTR, WRITE |
| | |
| NFS4ERR_ATTRNOTSUPP | CREATE, NVERIFY, OPEN, SETATTR, VERIFY |
| | |
| NFS4ERR_BADCHAR | CREATE, LINK, LOOKUP, NVERIFY, OPEN, |
| | REMOVE, RENAME, SECINFO, SETATTR, |
| | VERIFY |
| | |
| NFS4ERR_BADHANDLE | ACCESS, CB_GETATTR, CB_RECALL, CLOSE, |
| | COMMIT, CREATE, GETATTR, GETFH, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, PUTFH, READ, READDIR, |
| | READLINK, REMOVE, RENAME, RESTOREFH, |
| | SAVEFH, SECINFO, SETATTR, VERIFY, |
| | WRITE |
| | |
| NFS4ERR_BADNAME | CREATE, LINK, LOOKUP, OPEN, REMOVE, |
| | RENAME, SECINFO |
| | |
| NFS4ERR_BADOWNER | CREATE, OPEN, SETATTR |
| | |
| NFS4ERR_BADTYPE | CREATE |
| | |
| NFS4ERR_BADXDR | ACCESS, CB_GETATTR, CB_ILLEGAL, |
| | CB_RECALL, CLOSE, COMMIT, CREATE, |
| | DELEGPURGE, DELEGRETURN, GETATTR, |
| | ILLEGAL, LINK, LOCK, LOCKT, LOCKU, |
| | LOOKUP, NVERIFY, OPEN, OPENATTR, |
| | OPEN_CONFIRM, OPEN_DOWNGRADE, PUTFH, |
| | READ, READDIR, RELEASE_LOCKOWNER, |
| | REMOVE, RENAME, RENEW, SECINFO, |
| | SETATTR, SETCLIENTID, |
| | SETCLIENTID_CONFIRM, VERIFY, WRITE |
| | |
Haynes & Noveck Standards Track PAGE 201
RFC 7530 NFSv4 March 2015
| NFS4ERR_BAD_COOKIE | READDIR |
| | |
| NFS4ERR_BAD_RANGE | LOCK, LOCKT, LOCKU |
| | |
| NFS4ERR_BAD_SEQID | CLOSE, LOCK, LOCKU, OPEN, |
| | OPEN_CONFIRM, OPEN_DOWNGRADE |
| | |
| NFS4ERR_BAD_STATEID | CB_RECALL, CLOSE, DELEGRETURN, LOCK, |
| | LOCKU, OPEN, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, READ, SETATTR, WRITE |
| | |
| NFS4ERR_CB_PATH_DOWN | RENEW |
| | |
| NFS4ERR_CLID_INUSE | SETCLIENTID, SETCLIENTID_CONFIRM |
| | |
| NFS4ERR_DEADLOCK | LOCK |
| | |
| NFS4ERR_DELAY | ACCESS, CB_GETATTR, CB_RECALL, CLOSE, |
| | COMMIT, CREATE, DELEGPURGE, |
| | DELEGRETURN, GETATTR, LINK, LOCK, |
| | LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, |
| | OPEN_DOWNGRADE, PUTFH, PUTPUBFH, |
| | PUTROOTFH, READ, READDIR, READLINK, |
| | REMOVE, RENAME, SECINFO, SETATTR, |
| | SETCLIENTID, SETCLIENTID_CONFIRM, |
| | VERIFY, WRITE |
| | |
| NFS4ERR_DENIED | LOCK, LOCKT |
| | |
| NFS4ERR_DQUOT | CREATE, LINK, OPEN, OPENATTR, RENAME, |
| | SETATTR, WRITE |
| | |
| NFS4ERR_EXIST | CREATE, LINK, OPEN, RENAME |
| | |
| NFS4ERR_EXPIRED | CLOSE, DELEGRETURN, LOCK, LOCKT, |
| | LOCKU, OPEN, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, READ, |
| | RELEASE_LOCKOWNER, RENEW, SETATTR, |
| | WRITE |
| | |
| NFS4ERR_FBIG | OPEN, SETATTR, WRITE |
| | |
Haynes & Noveck Standards Track PAGE 202
RFC 7530 NFSv4 March 2015
| NFS4ERR_FHEXPIRED | ACCESS, CLOSE, COMMIT, CREATE, |
| | GETATTR, GETFH, LINK, LOCK, LOCKT, |
| | LOCKU, LOOKUP, LOOKUPP, NVERIFY, OPEN, |
| | OPENATTR, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, PUTFH, READ, READDIR, |
| | READLINK, REMOVE, RENAME, RESTOREFH, |
| | SAVEFH, SECINFO, SETATTR, VERIFY, |
| | WRITE |
| | |
| NFS4ERR_FILE_OPEN | LINK, REMOVE, RENAME |
| | |
| NFS4ERR_GRACE | GETATTR, LOCK, LOCKT, LOCKU, NVERIFY, |
| | OPEN, READ, REMOVE, RENAME, SETATTR, |
| | VERIFY, WRITE |
| | |
| NFS4ERR_INVAL | ACCESS, CB_GETATTR, CLOSE, COMMIT, |
| | CREATE, DELEGRETURN, GETATTR, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, NVERIFY, |
| | OPEN, OPEN_CONFIRM, OPEN_DOWNGRADE, |
| | READ, READDIR, READLINK, REMOVE, |
| | RENAME, SECINFO, SETATTR, SETCLIENTID, |
| | VERIFY, WRITE |
| | |
| NFS4ERR_IO | ACCESS, COMMIT, CREATE, GETATTR, LINK, |
| | LOOKUP, LOOKUPP, NVERIFY, OPEN, |
| | OPENATTR, READ, READDIR, READLINK, |
| | REMOVE, RENAME, SETATTR, VERIFY, WRITE |
| | |
| NFS4ERR_ISDIR | CLOSE, COMMIT, LINK, LOCK, LOCKT, |
| | LOCKU, OPEN, OPEN_CONFIRM, READ, |
| | READLINK, SETATTR, WRITE |
| | |
| NFS4ERR_LEASE_MOVED | CLOSE, DELEGPURGE, DELEGRETURN, LOCK, |
| | LOCKT, LOCKU, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, READ, |
| | RELEASE_LOCKOWNER, RENEW, SETATTR, |
| | WRITE |
| | |
| NFS4ERR_LOCKED | READ, SETATTR, WRITE |
| | |
| NFS4ERR_LOCKS_HELD | CLOSE, OPEN_DOWNGRADE, |
| | RELEASE_LOCKOWNER |
| | |
| NFS4ERR_LOCK_NOTSUPP | LOCK |
| | |
| NFS4ERR_LOCK_RANGE | LOCK, LOCKT, LOCKU |
| | |
| NFS4ERR_MLINK | LINK |
Haynes & Noveck Standards Track PAGE 203
RFC 7530 NFSv4 March 2015
| | |
| NFS4ERR_MOVED | ACCESS, CLOSE, COMMIT, CREATE, |
| | DELEGRETURN, GETATTR, GETFH, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, PUTFH, READ, READDIR, |
| | READLINK, REMOVE, RENAME, RESTOREFH, |
| | SAVEFH, SECINFO, SETATTR, VERIFY, |
| | WRITE |
| | |
| NFS4ERR_NAMETOOLONG | CREATE, LINK, LOOKUP, OPEN, REMOVE, |
| | RENAME, SECINFO |
| | |
| NFS4ERR_NOENT | LINK, LOOKUP, LOOKUPP, OPEN, OPENATTR, |
| | REMOVE, RENAME, SECINFO |
| | |
| NFS4ERR_NOFILEHANDLE | ACCESS, CLOSE, COMMIT, CREATE, |
| | DELEGRETURN, GETATTR, GETFH, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, READ, READDIR, |
| | READLINK, REMOVE, RENAME, SAVEFH, |
| | SECINFO, SETATTR, VERIFY, WRITE |
| | |
| NFS4ERR_NOSPC | CREATE, LINK, OPEN, OPENATTR, RENAME, |
| | SETATTR, WRITE |
| | |
| NFS4ERR_NOTDIR | CREATE, LINK, LOOKUP, LOOKUPP, OPEN, |
| | READDIR, REMOVE, RENAME, SECINFO |
| | |
| NFS4ERR_NOTEMPTY | REMOVE, RENAME |
| | |
| NFS4ERR_NOTSUPP | DELEGPURGE, DELEGRETURN, LINK, OPEN, |
| | OPENATTR, READLINK |
| | |
| NFS4ERR_NOT_SAME | READDIR, VERIFY |
| | |
| NFS4ERR_NO_GRACE | LOCK, OPEN |
| | |
| NFS4ERR_NXIO | WRITE |
| | |
| NFS4ERR_OLD_STATEID | CLOSE, DELEGRETURN, LOCK, LOCKU, OPEN, |
| | OPEN_CONFIRM, OPEN_DOWNGRADE, READ, |
| | SETATTR, WRITE |
| | |
| NFS4ERR_OPENMODE | LOCK, READ, SETATTR, WRITE |
| | |
| NFS4ERR_OP_ILLEGAL | CB_ILLEGAL, ILLEGAL |
Haynes & Noveck Standards Track PAGE 204
RFC 7530 NFSv4 March 2015
| | |
| NFS4ERR_PERM | CREATE, OPEN, SETATTR |
| | |
| NFS4ERR_RECLAIM_BAD | LOCK, OPEN |
| | |
| NFS4ERR_RECLAIM_CONFLICT | LOCK, OPEN |
| | |
| NFS4ERR_RESOURCE | ACCESS, CLOSE, COMMIT, CREATE, |
| | DELEGPURGE, DELEGRETURN, GETATTR, |
| | GETFH, LINK, LOCK, LOCKT, LOCKU, |
| | LOOKUP, LOOKUPP, OPEN, OPENATTR, |
| | OPEN_CONFIRM, OPEN_DOWNGRADE, READ, |
| | READDIR, READLINK, RELEASE_LOCKOWNER, |
| | REMOVE, RENAME, RENEW, RESTOREFH, |
| | SAVEFH, SECINFO, SETATTR, SETCLIENTID, |
| | SETCLIENTID_CONFIRM, VERIFY, WRITE |
| | |
| NFS4ERR_RESTOREFH | RESTOREFH |
| | |
| NFS4ERR_ROFS | COMMIT, CREATE, LINK, OPEN, OPENATTR, |
| | OPEN_DOWNGRADE, REMOVE, RENAME, |
| | SETATTR, WRITE |
| | |
| NFS4ERR_SAME | NVERIFY |
| | |
| NFS4ERR_SERVERFAULT | ACCESS, CB_GETATTR, CB_RECALL, CLOSE, |
| | COMMIT, CREATE, DELEGPURGE, |
| | DELEGRETURN, GETATTR, GETFH, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, PUTFH, PUTPUBFH, |
| | PUTROOTFH, READ, READDIR, READLINK, |
| | RELEASE_LOCKOWNER, REMOVE, RENAME, |
| | RENEW, RESTOREFH, SAVEFH, SECINFO, |
| | SETATTR, SETCLIENTID, |
| | SETCLIENTID_CONFIRM, VERIFY, WRITE |
| | |
| NFS4ERR_SHARE_DENIED | OPEN |
| | |
| NFS4ERR_STALE | ACCESS, CLOSE, COMMIT, CREATE, |
| | DELEGRETURN, GETATTR, GETFH, LINK, |
| | LOCK, LOCKT, LOCKU, LOOKUP, LOOKUPP, |
| | NVERIFY, OPEN, OPENATTR, OPEN_CONFIRM, |
| | OPEN_DOWNGRADE, PUTFH, READ, READDIR, |
| | READLINK, REMOVE, RENAME, RESTOREFH, |
| | SAVEFH, SECINFO, SETATTR, VERIFY, |
| | WRITE |
| | |
Haynes & Noveck Standards Track PAGE 205
RFC 7530 NFSv4 March 2015
| NFS4ERR_STALE_CLIENTID | DELEGPURGE, LOCK, LOCKT, OPEN, |
| | RELEASE_LOCKOWNER, RENEW, |
| | SETCLIENTID_CONFIRM |
| | |
| NFS4ERR_STALE_STATEID | CLOSE, DELEGRETURN, LOCK, LOCKU, |
| | OPEN_CONFIRM, OPEN_DOWNGRADE, READ, |
| | SETATTR, WRITE |
| | |
| NFS4ERR_SYMLINK | COMMIT, LOOKUP, LOOKUPP, OPEN, READ, |
| | WRITE |
| | |
| NFS4ERR_TOOSMALL | READDIR |
| | |
| NFS4ERR_WRONGSEC | LINK, LOOKUP, LOOKUPP, OPEN, PUTFH, |
| | PUTPUBFH, PUTROOTFH, RENAME, RESTOREFH |
| | |
| NFS4ERR_XDEV | LINK, RENAME |
| | |
+--------------------------+----------------------------------------+
Table 9: Errors and the Operations That Use Them
14. NFSv4 Requests
For the NFSv4 RPC program, there are two traditional RPC procedures:
NULL and COMPOUND. All other functionality is defined as a set of
operations, and these operations are defined in normal XDR/RPC syntax
and semantics. However, these operations are encapsulated within the
COMPOUND procedure. This requires that the client combine one or
more of the NFSv4 operations into a single request.
The NFS4_CALLBACK program is used to provide server-to-client
signaling and is constructed in a fashion similar to the NFSv4
program. The procedures CB_NULL and CB_COMPOUND are defined in the
same way as NULL and COMPOUND are within the NFS program. The
CB_COMPOUND request also encapsulates the remaining operations of the
NFS4_CALLBACK program. There is no predefined RPC program number for
the NFS4_CALLBACK program. It is up to the client to specify a
program number in the "transient" program range. The program and
port numbers of the NFS4_CALLBACK program are provided by the client
as part of the SETCLIENTID/SETCLIENTID_CONFIRM sequence. The program
and port can be changed by another SETCLIENTID/SETCLIENTID_CONFIRM
sequence, and it is possible to use the sequence to change them
within a client incarnation without removing relevant leased client
state.
Haynes & Noveck Standards Track PAGE 206
RFC 7530 NFSv4 March 2015
14.1. COMPOUND Procedure
The COMPOUND procedure provides the opportunity for better
performance within high-latency networks. The client can avoid
cumulative latency of multiple RPCs by combining multiple dependent
operations into a single COMPOUND procedure. A COMPOUND operation
may provide for protocol simplification by allowing the client to
combine basic procedures into a single request that is customized for
the client's environment.
The CB_COMPOUND procedure precisely parallels the features of
COMPOUND as described above.
The basic structure of the COMPOUND procedure is:
+-----+--------------+--------+-----------+-----------+-----------+--
| tag | minorversion | numops | op + args | op + args | op + args |
+-----+--------------+--------+-----------+-----------+-----------+--
and the reply's structure is:
+------------+-----+--------+-----------------------+--
|last status | tag | numres | status + op + results |
+------------+-----+--------+-----------------------+--
The numops and numres fields, used in the depiction above, represent
the count for the counted array encoding used to signify the number
of arguments or results encoded in the request and response. As per
the XDR encoding, these counts must match exactly the number of
operation arguments or results encoded.
14.2. Evaluation of a COMPOUND Request
The server will process the COMPOUND procedure by evaluating each of
the operations within the COMPOUND procedure in order. Each
component operation consists of a 32-bit operation code, followed by
the argument of length determined by the type of operation. The
results of each operation are encoded in sequence into a reply
buffer. The results of each operation are preceded by the opcode and
a status code (normally zero). If an operation results in a non-zero
status code, the status will be encoded, evaluation of the COMPOUND
sequence will halt, and the reply will be returned. Note that
evaluation stops even in the event of "non-error" conditions such as
NFS4ERR_SAME.
Haynes & Noveck Standards Track PAGE 207
RFC 7530 NFSv4 March 2015
There are no atomicity requirements for the operations contained
within the COMPOUND procedure. The operations being evaluated as
part of a COMPOUND request may be evaluated simultaneously with other
COMPOUND requests that the server receives.
A COMPOUND is not a transaction, and it is the client's
responsibility to recover from any partially completed COMPOUND
procedure. These may occur at any point due to errors such as
NFS4ERR_RESOURCE and NFS4ERR_DELAY. Note that these errors can occur
in an otherwise valid operation string. Further, a server reboot
that occurs in the middle of processing a COMPOUND procedure may
leave the client with the difficult task of determining how far
COMPOUND processing has proceeded. Therefore, the client should
avoid overly complex COMPOUND procedures in the event of the failure
of an operation within the procedure.
Each operation assumes a current filehandle and a saved filehandle
that are available as part of the execution context of the COMPOUND
request. Operations may set, change, or return the current
filehandle. The saved filehandle is used for temporary storage of a
filehandle value and as operands for the RENAME and LINK operations.
14.3. Synchronous Modifying Operations
NFSv4 operations that modify the file system are synchronous. When
an operation is successfully completed at the server, the client can
trust that any data associated with the request is now in stable
storage (the one exception is in the case of the file data in a WRITE
operation with the UNSTABLE4 option specified).
This implies that any previous operations within the same COMPOUND
request are also reflected in stable storage. This behavior enables
the client's ability to recover from a partially executed COMPOUND
request that may have resulted from the failure of the server. For
example, if a COMPOUND request contains operations A and B and the
server is unable to send a response to the client, then depending on
the progress the server made in servicing the request, the result of
both operations may be reflected in stable storage or just
operation A may be reflected. The server must not have just the
results of operation B in stable storage.
14.4. Operation Values
The operations encoded in the COMPOUND procedure are identified by
operation values. To avoid overlap with the RPC procedure numbers,
operations 0 (zero) and 1 are not defined. Operation 2 is not
defined but is reserved for future use with minor versioning.
Haynes & Noveck Standards Track PAGE 208
RFC 7530 NFSv4 March 2015
15. NFSv4 Procedures
15.1. Procedure 0: NULL - No Operation
15.1.1. SYNOPSIS
<null>
15.1.2. ARGUMENT
void;
15.1.3. RESULT
void;
15.1.4. DESCRIPTION
Standard NULL procedure. Void argument, void response. This
procedure has no functionality associated with it. Because of this,
it is sometimes used to measure the overhead of processing a service
request. Therefore, the server should ensure that no unnecessary
work is done in servicing this procedure.
Haynes & Noveck Standards Track PAGE 209
RFC 7530 NFSv4 March 2015
15.2. Procedure 1: COMPOUND - COMPOUND Operations
15.2.1. SYNOPSIS
compoundargs -> compoundres
15.2.2. ARGUMENT
union nfs_argop4 switch (nfs_opnum4 argop) {
case <OPCODE>: <argument>;
...
};
struct COMPOUND4args {
utf8str_cs tag;
uint32_t minorversion;
nfs_argop4 argarray<>;
};
15.2.3. RESULT
union nfs_resop4 switch (nfs_opnum4 resop) {
case <OPCODE>: <argument>;
...
};
struct COMPOUND4res {
nfsstat4 status;
utf8str_cs tag;
nfs_resop4 resarray<>;
};
15.2.4. DESCRIPTION
The COMPOUND procedure is used to combine one or more of the NFS
operations into a single RPC request. The main NFS RPC program has
two main procedures: NULL and COMPOUND. All other operations use the
COMPOUND procedure as a wrapper.
The COMPOUND procedure is used to combine individual operations into
a single RPC request. The server interprets each of the operations
in turn. If an operation is executed by the server and the status of
that operation is NFS4_OK, then the next operation in the COMPOUND
procedure is executed. The server continues this process until there
are no more operations to be executed or one of the operations has a
status value other than NFS4_OK.
Haynes & Noveck Standards Track PAGE 210
RFC 7530 NFSv4 March 2015
In the processing of the COMPOUND procedure, the server may find that
it does not have the available resources to execute any or all of the
operations within the COMPOUND sequence. In this case, the error
NFS4ERR_RESOURCE will be returned for the particular operation within
the COMPOUND procedure where the resource exhaustion occurred. This
assumes that all previous operations within the COMPOUND sequence
have been evaluated successfully. The results for all of the
evaluated operations must be returned to the client.
The server will generally choose between two methods of decoding the
client's request. The first would be the traditional one-pass XDR
decode, in which decoding of the entire COMPOUND precedes execution
of any operation within it. If there is an XDR decoding error in
this case, an RPC XDR decode error would be returned. The second
method would be to make an initial pass to decode the basic COMPOUND
request and then to XDR decode each of the individual operations, as
the server is ready to execute it. In this case, the server may
encounter an XDR decode error during such an operation decode, after
previous operations within the COMPOUND have been executed. In this
case, the server would return the error NFS4ERR_BADXDR to signify the
decode error.
The COMPOUND arguments contain a minorversion field. The initial and
default value for this field is 0 (zero). This field will be used by
future minor versions such that the client can communicate to the
server what minor version is being requested. If the server receives
a COMPOUND procedure with a minorversion field value that it does not
support, the server MUST return an error of
NFS4ERR_MINOR_VERS_MISMATCH and a zero-length resultdata array.
Contained within the COMPOUND results is a status field. If the
results array length is non-zero, this status must be equivalent to
the status of the last operation that was executed within the
COMPOUND procedure. Therefore, if an operation incurred an error,
then the status value will be the same error value as is being
returned for the operation that failed.
Note that operations 0 (zero), 1 (one), and 2 (two) are not defined
for the COMPOUND procedure. It is possible that the server receives
a request that contains an operation that is less than the first
legal operation (OP_ACCESS) or greater than the last legal operation
(OP_RELEASE_LOCKOWNER). In this case, the server's response will
encode the opcode OP_ILLEGAL rather than the illegal opcode of the
request. The status field in the ILLEGAL return results will be set
to NFS4ERR_OP_ILLEGAL. The COMPOUND procedure's return results will
also be NFS4ERR_OP_ILLEGAL.
Haynes & Noveck Standards Track PAGE 211
RFC 7530 NFSv4 March 2015
The definition of the "tag" in the request is left to the
implementer. It may be used to summarize the content of the COMPOUND
request for the benefit of packet sniffers and engineers debugging
implementations. However, the value of "tag" in the response SHOULD
be the same value as the value provided in the request. This applies
to the tag field of the CB_COMPOUND procedure as well.
15.2.4.1. Current Filehandle
The current filehandle and the saved filehandle are used throughout
the protocol. Most operations implicitly use the current filehandle
as an argument, and many set the current filehandle as part of the
results. The combination of client-specified sequences of operations
and current and saved filehandle arguments and results allows for
greater protocol flexibility. The best or easiest example of current
filehandle usage is a sequence like the following:
PUTFH fh1 {fh1}
LOOKUP "compA" {fh2}
GETATTR {fh2}
LOOKUP "compB" {fh3}
GETATTR {fh3}
LOOKUP "compC" {fh4}
GETATTR {fh4}
GETFH
Figure 1: Filehandle Usage Example
In this example, the PUTFH (Section 16.20) operation explicitly sets
the current filehandle value, while the result of each LOOKUP
operation sets the current filehandle value to the resultant file
system object. Also, the client is able to insert GETATTR operations
using the current filehandle as an argument.
The PUTROOTFH (Section 16.22) and PUTPUBFH (Section 16.21) operations
also set the current filehandle. The above example would replace
"PUTFH fh1" with PUTROOTFH or PUTPUBFH with no filehandle argument in
order to achieve the same effect (on the assumption that "compA" is
directly below the root of the namespace).
Along with the current filehandle, there is a saved filehandle.
While the current filehandle is set as the result of operations like
LOOKUP, the saved filehandle must be set directly with the use of the
SAVEFH operation. The SAVEFH operation copies the current filehandle
value to the saved value. The saved filehandle value is used in
combination with the current filehandle value for the LINK and RENAME
operations. The RESTOREFH operation will copy the saved filehandle
Haynes & Noveck Standards Track PAGE 212
RFC 7530 NFSv4 March 2015
value to the current filehandle value; as a result, the saved
filehandle value may be used as a sort of "scratch" area for the
client's series of operations.
15.2.5. IMPLEMENTATION
Since an error of any type may occur after only a portion of the
operations have been evaluated, the client must be prepared to
recover from any failure. If the source of an NFS4ERR_RESOURCE error
was a complex or lengthy set of operations, it is likely that if the
number of operations were reduced the server would be able to
evaluate them successfully. Therefore, the client is responsible for
dealing with this type of complexity in recovery.
A single compound should not contain multiple operations that have
different values for the clientid field used in OPEN, LOCK, or RENEW.
This can cause confusion in cases in which operations that do not
contain clientids have potential interactions with operations that
do. When only a single clientid has been used, it is clear what
client is being referenced. For a particular example involving the
interaction of OPEN and GETATTR, see Section 16.16.6.
Haynes & Noveck Standards Track PAGE 213
RFC 7530 NFSv4 March 2015
16. NFSv4 Operations
16.1. Operation 3: ACCESS - Check Access Rights
16.1.1. SYNOPSIS
(cfh), accessreq -> supported, accessrights
16.1.2. ARGUMENT
const ACCESS4_READ = 0x00000001;
const ACCESS4_LOOKUP = 0x00000002;
const ACCESS4_MODIFY = 0x00000004;
const ACCESS4_EXTEND = 0x00000008;
const ACCESS4_DELETE = 0x00000010;
const ACCESS4_EXECUTE = 0x00000020;
struct ACCESS4args {
/* CURRENT_FH: object */
uint32_t access;
};
16.1.3. RESULT
struct ACCESS4resok {
uint32_t supported;
uint32_t access;
};
union ACCESS4res switch (nfsstat4 status) {
case NFS4_OK:
ACCESS4resok resok4;
default:
void;
};
16.1.4. DESCRIPTION
ACCESS determines the access rights that a user, as identified by the
credentials in the RPC request, has with respect to the file system
object specified by the current filehandle. The client encodes the
set of access rights that are to be checked in the bitmask "access".
The server checks the permissions encoded in the bitmask. If a
status of NFS4_OK is returned, two bitmasks are included in the
response. The first, "supported", represents the access rights for
which the server can verify reliably. The second, "access",
represents the access rights available to the user for the filehandle
provided. On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 214
RFC 7530 NFSv4 March 2015
Note that the supported field will contain only as many values as
were originally sent in the arguments. For example, if the client
sends an ACCESS operation with only the ACCESS4_READ value set and
the server supports this value, the server will return only
ACCESS4_READ even if it could have reliably checked other values.
The results of this operation are necessarily advisory in nature. A
return status of NFS4_OK and the appropriate bit set in the bitmask
do not imply that such access will be allowed to the file system
object in the future. This is because access rights can be revoked
by the server at any time.
The following access permissions may be requested:
ACCESS4_READ: Read data from file or read a directory.
ACCESS4_LOOKUP: Look up a name in a directory (no meaning for
non-directory objects).
ACCESS4_MODIFY: Rewrite existing file data or modify existing
directory entries.
ACCESS4_EXTEND: Write new data or add directory entries.
ACCESS4_DELETE: Delete an existing directory entry.
ACCESS4_EXECUTE: Execute file (no meaning for a directory).
On success, the current filehandle retains its value.
16.1.5. IMPLEMENTATION
In general, it is not sufficient for the client to attempt to deduce
access permissions by inspecting the uid, gid, and mode fields in the
file attributes or by attempting to interpret the contents of the ACL
attribute. This is because the server may perform uid or gid mapping
or enforce additional access control restrictions. It is also
possible that the server may not be in the same ID space as the
client. In these cases (and perhaps others), the client cannot
reliably perform an access check with only current file attributes.
In the NFSv2 protocol, the only reliable way to determine whether an
operation was allowed was to try it and see if it succeeded or
failed. Using the ACCESS operation in the NFSv4 protocol, the client
can ask the server to indicate whether or not one or more classes of
operations are permitted. The ACCESS operation is provided to allow
clients to check before doing a series of operations that might
result in an access failure. The OPEN operation provides a point
Haynes & Noveck Standards Track PAGE 215
RFC 7530 NFSv4 March 2015
where the server can verify access to the file object and the method
to return that information to the client. The ACCESS operation is
still useful for directory operations or for use in the case where
the UNIX API "access" is used on the client.
The information returned by the server in response to an ACCESS call
is not permanent. It was correct at the exact time that the server
performed the checks, but not necessarily afterward. The server can
revoke access permission at any time.
The client should use the effective credentials of the user to build
the authentication information in the ACCESS request used to
determine access rights. It is the effective user and group
credentials that are used in subsequent READ and WRITE operations.
Many implementations do not directly support the ACCESS4_DELETE
permission. Operating systems like UNIX will ignore the
ACCESS4_DELETE bit if set on an access request on a non-directory
object. In these systems, delete permission on a file is determined
by the access permissions on the directory in which the file resides,
instead of being determined by the permissions of the file itself.
Therefore, the mask returned enumerating which access rights can be
supported will have the ACCESS4_DELETE value set to 0. This
indicates to the client that the server was unable to check that
particular access right. The ACCESS4_DELETE bit in the access mask
returned will then be ignored by the client.
Haynes & Noveck Standards Track PAGE 216
RFC 7530 NFSv4 March 2015
16.2. Operation 4: CLOSE - Close File
16.2.1. SYNOPSIS
(cfh), seqid, open_stateid -> open_stateid
16.2.2. ARGUMENT
struct CLOSE4args {
/* CURRENT_FH: object */
seqid4 seqid;
stateid4 open_stateid;
};
16.2.3. RESULT
union CLOSE4res switch (nfsstat4 status) {
case NFS4_OK:
stateid4 open_stateid;
default:
void;
};
16.2.4. DESCRIPTION
The CLOSE operation releases share reservations for the regular or
named attribute file as specified by the current filehandle. The
share reservations and other state information released at the server
as a result of this CLOSE are only associated with the supplied
stateid. The sequence id provides for the correct ordering. State
associated with other OPENs is not affected.
If byte-range locks are held, the client SHOULD release all locks
before issuing a CLOSE. The server MAY free all outstanding locks on
CLOSE, but some servers may not support the CLOSE of a file that
still has byte-range locks held. The server MUST return failure if
any locks would exist after the CLOSE.
On success, the current filehandle retains its value.
16.2.5. IMPLEMENTATION
Even though CLOSE returns a stateid, this stateid is not useful to
the client and should be treated as deprecated. CLOSE "shuts down"
the state associated with all OPENs for the file by a single
open-owner. As noted above, CLOSE will either release all file
locking state or return an error. Therefore, the stateid returned by
CLOSE is not useful for the operations that follow.
Haynes & Noveck Standards Track PAGE 217
RFC 7530 NFSv4 March 2015
16.3. Operation 5: COMMIT - Commit Cached Data
16.3.1. SYNOPSIS
(cfh), offset, count -> verifier
16.3.2. ARGUMENT
struct COMMIT4args {
/* CURRENT_FH: file */
offset4 offset;
count4 count;
};
16.3.3. RESULT
struct COMMIT4resok {
verifier4 writeverf;
};
union COMMIT4res switch (nfsstat4 status) {
case NFS4_OK:
COMMIT4resok resok4;
default:
void;
};
16.3.4. DESCRIPTION
The COMMIT operation forces or flushes data to stable storage for the
file specified by the current filehandle. The flushed data is that
which was previously written with a WRITE operation that had the
stable field set to UNSTABLE4.
The offset specifies the position within the file where the flush is
to begin. An offset value of 0 (zero) means to flush data starting
at the beginning of the file. The count specifies the number of
bytes of data to flush. If count is 0 (zero), a flush from the
offset to the end of the file is done.
The server returns a write verifier upon successful completion of the
COMMIT. The write verifier is used by the client to determine if the
server has restarted or rebooted between the initial WRITE(s) and the
COMMIT. The client does this by comparing the write verifier
returned from the initial writes and the verifier returned by the
COMMIT operation. The server must vary the value of the write
verifier at each server event or instantiation that may lead to a
Haynes & Noveck Standards Track PAGE 218
RFC 7530 NFSv4 March 2015
loss of uncommitted data. Most commonly, this occurs when the server
is rebooted; however, other events at the server may result in
uncommitted data loss as well.
On success, the current filehandle retains its value.
16.3.5. IMPLEMENTATION
The COMMIT operation is similar in operation and semantics to the
POSIX fsync() [fsync] system call that synchronizes a file's state
with the disk (file data and metadata are flushed to disk or stable
storage). COMMIT performs the same operation for a client, flushing
any unsynchronized data and metadata on the server to the server's
disk or stable storage for the specified file. Like fsync(), it may
be that there is some modified data or no modified data to
synchronize. The data may have been synchronized by the server's
normal periodic buffer synchronization activity. COMMIT should
return NFS4_OK, unless there has been an unexpected error.
COMMIT differs from fsync() in that it is possible for the client to
flush a range of the file (most likely triggered by a buffer-
reclamation scheme on the client before the file has been completely
written).
The server implementation of COMMIT is reasonably simple. If the
server receives a full file COMMIT request that is starting at offset
0 and count 0, it should do the equivalent of fsync()'ing the file.
Otherwise, it should arrange to have the cached data in the range
specified by offset and count to be flushed to stable storage. In
both cases, any metadata associated with the file must be flushed to
stable storage before returning. It is not an error for there to be
nothing to flush on the server. This means that the data and
metadata that needed to be flushed have already been flushed or lost
during the last server failure.
The client implementation of COMMIT is a little more complex. There
are two reasons for wanting to commit a client buffer to stable
storage. The first is that the client wants to reuse a buffer. In
this case, the offset and count of the buffer are sent to the server
in the COMMIT request. The server then flushes any cached data based
on the offset and count, and flushes any metadata associated with the
file. It then returns the status of the flush and the write
verifier. The other reason for the client to generate a COMMIT is
for a full file flush, such as may be done at CLOSE. In this case,
the client would gather all of the buffers for this file that contain
uncommitted data, do the COMMIT operation with an offset of 0 and
count of 0, and then free all of those buffers. Any other dirty
buffers would be sent to the server in the normal fashion.
Haynes & Noveck Standards Track PAGE 219
RFC 7530 NFSv4 March 2015
After a buffer is written by the client with the stable parameter set
to UNSTABLE4, the buffer must be considered modified by the client
until the buffer has been either flushed via a COMMIT operation or
written via a WRITE operation with the stable parameter set to
FILE_SYNC4 or DATA_SYNC4. This is done to prevent the buffer from
being freed and reused before the data can be flushed to stable
storage on the server.
When a response is returned from either a WRITE or a COMMIT operation
and it contains a write verifier that is different than previously
returned by the server, the client will need to retransmit all of the
buffers containing uncommitted cached data to the server. How this
is to be done is up to the implementer. If there is only one buffer
of interest, then it should probably be sent back over in a WRITE
request with the appropriate stable parameter. If there is more than
one buffer, it might be worthwhile to retransmit all of the buffers
in WRITE requests with the stable parameter set to UNSTABLE4 and then
retransmit the COMMIT operation to flush all of the data on the
server to stable storage. The timing of these retransmissions is
left to the implementer.
The above description applies to page-cache-based systems as well as
buffer-cache-based systems. In those systems, the virtual memory
system will need to be modified instead of the buffer cache.
Haynes & Noveck Standards Track PAGE 220
RFC 7530 NFSv4 March 2015
16.4. Operation 6: CREATE - Create a Non-regular File Object
16.4.1. SYNOPSIS
(cfh), name, type, attrs -> (cfh), cinfo, attrset
16.4.2. ARGUMENT
union createtype4 switch (nfs_ftype4 type) {
case NF4LNK:
linktext4 linkdata;
case NF4BLK:
case NF4CHR:
specdata4 devdata;
case NF4SOCK:
case NF4FIFO:
case NF4DIR:
void;
default:
void; /* server should return NFS4ERR_BADTYPE */
};
struct CREATE4args {
/* CURRENT_FH: directory for creation */
createtype4 objtype;
component4 objname;
fattr4 createattrs;
};
16.4.3. RESULT
struct CREATE4resok {
change_info4 cinfo;
bitmap4 attrset; /* attributes set */
};
union CREATE4res switch (nfsstat4 status) {
case NFS4_OK:
CREATE4resok resok4;
default:
void;
};
Haynes & Noveck Standards Track PAGE 221
RFC 7530 NFSv4 March 2015
16.4.4. DESCRIPTION
The CREATE operation creates a non-regular file object in a directory
with a given name. The OPEN operation is used to create a regular
file.
The objname specifies the name for the new object. The objtype
determines the type of object to be created: directory, symlink, etc.
If an object of the same name already exists in the directory, the
server will return the error NFS4ERR_EXIST.
For the directory where the new file object was created, the server
returns change_info4 information in cinfo. With the atomic field of
the change_info4 struct, the server will indicate if the before and
after change attributes were obtained atomically with respect to the
file object creation.
If the objname is of zero length, NFS4ERR_INVAL will be returned.
The objname is also subject to the normal UTF-8, character support,
and name checks. See Section 12.7 for further discussion.
The current filehandle is replaced by that of the new object.
The createattrs field specifies the initial set of attributes for the
object. The set of attributes may include any writable attribute
valid for the object type. When the operation is successful, the
server will return to the client an attribute mask signifying which
attributes were successfully set for the object.
If createattrs includes neither the owner attribute nor an ACL with
an ACE for the owner, and if the server's file system both supports
and requires an owner attribute (or an owner ACE), then the server
MUST derive the owner (or the owner ACE). This would typically be
from the principal indicated in the RPC credentials of the call, but
the server's operating environment or file system semantics may
dictate other methods of derivation. Similarly, if createattrs
includes neither the group attribute nor a group ACE, and if the
server's file system both supports and requires the notion of a group
attribute (or group ACE), the server MUST derive the group attribute
(or the corresponding owner ACE) for the file. This could be from
the RPC's credentials, such as the group principal if the credentials
include it (such as with AUTH_SYS), from the group identifier
associated with the principal in the credentials (e.g., POSIX systems
have a user database [getpwnam] that has the group identifier for
every user identifier), inherited from the directory the object is
Haynes & Noveck Standards Track PAGE 222
RFC 7530 NFSv4 March 2015
created in, or whatever else the server's operating environment
or file system semantics dictate. This applies to the OPEN
operation too.
Conversely, it is possible the client will specify in createattrs an
owner attribute, group attribute, or ACL that the principal indicated
the RPC's credentials does not have permissions to create files for.
The error to be returned in this instance is NFS4ERR_PERM. This
applies to the OPEN operation too.
16.4.5. IMPLEMENTATION
If the client desires to set attribute values after the create, a
SETATTR operation can be added to the COMPOUND request so that the
appropriate attributes will be set.
Haynes & Noveck Standards Track PAGE 223
RFC 7530 NFSv4 March 2015
16.5. Operation 7: DELEGPURGE - Purge Delegations Awaiting Recovery
16.5.1. SYNOPSIS
clientid ->
16.5.2. ARGUMENT
struct DELEGPURGE4args {
clientid4 clientid;
};
16.5.3. RESULT
struct DELEGPURGE4res {
nfsstat4 status;
};
16.5.4. DESCRIPTION
DELEGPURGE purges all of the delegations awaiting recovery for a
given client. This is useful for clients that do not commit
delegation information to stable storage, to indicate that
conflicting requests need not be delayed by the server awaiting
recovery of delegation information.
This operation is provided to support clients that record delegation
information in stable storage on the client. In this case,
DELEGPURGE should be issued immediately after doing delegation
recovery (using CLAIM_DELEGATE_PREV) on all delegations known to the
client. Doing so will notify the server that no additional
delegations for the client will be recovered, allowing it to free
resources and avoid delaying other clients who make requests that
conflict with the unrecovered delegations. All clients SHOULD use
DELEGPURGE as part of recovery once it is known that no further
CLAIM_DELEGATE_PREV recovery will be done. This includes clients
that do not record delegation information in stable storage, who
would then do a DELEGPURGE immediately after SETCLIENTID_CONFIRM.
Haynes & Noveck Standards Track PAGE 224
RFC 7530 NFSv4 March 2015
The set of delegations known to the server and the client may be
different. The reasons for this include:
o A client may fail after making a request that resulted in
delegation but before it received the results and committed them
to the client's stable storage.
o A client may fail after deleting its indication that a delegation
exists but before the delegation return is fully processed by the
server.
o In the case in which the server and the client restart, the server
may have limited persistent recording of delegations to a subset
of those in existence.
o A client may have only persistently recorded information about a
subset of delegations.
The server MAY support DELEGPURGE, but its support or non-support
should match that of CLAIM_DELEGATE_PREV:
o A server may support both DELEGPURGE and CLAIM_DELEGATE_PREV.
o A server may support neither DELEGPURGE nor CLAIM_DELEGATE_PREV.
This fact allows a client starting up to determine if the server is
prepared to support persistent storage of delegation information and
thus whether it may use write-back caching to local persistent
storage, relying on CLAIM_DELEGATE_PREV recovery to allow such
changed data to be flushed safely to the server in the event of
client restart.
Haynes & Noveck Standards Track PAGE 225
RFC 7530 NFSv4 March 2015
16.6. Operation 8: DELEGRETURN - Return Delegation
16.6.1. SYNOPSIS
(cfh), stateid ->
16.6.2. ARGUMENT
struct DELEGRETURN4args {
/* CURRENT_FH: delegated file */
stateid4 deleg_stateid;
};
16.6.3. RESULT
struct DELEGRETURN4res {
nfsstat4 status;
};
16.6.4. DESCRIPTION
DELEGRETURN returns the delegation represented by the current
filehandle and stateid.
Delegations may be returned when recalled or voluntarily (i.e.,
before the server has recalled them). In either case, the client
must properly propagate state changed under the context of the
delegation to the server before returning the delegation.
Haynes & Noveck Standards Track PAGE 226
RFC 7530 NFSv4 March 2015
16.7. Operation 9: GETATTR - Get Attributes
16.7.1. SYNOPSIS
(cfh), attrbits -> attrbits, attrvals
16.7.2. ARGUMENT
struct GETATTR4args {
/* CURRENT_FH: directory or file */
bitmap4 attr_request;
};
16.7.3. RESULT
struct GETATTR4resok {
fattr4 obj_attributes;
};
union GETATTR4res switch (nfsstat4 status) {
case NFS4_OK:
GETATTR4resok resok4;
default:
void;
};
16.7.4. DESCRIPTION
The GETATTR operation will obtain attributes for the file system
object specified by the current filehandle. The client sets a bit in
the bitmap argument for each attribute value that it would like the
server to return. The server returns an attribute bitmap that
indicates the attribute values for which it was able to return
values, followed by the attribute values ordered lowest attribute
number first.
The server MUST return a value for each attribute that the client
requests if the attribute is supported by the server. If the server
does not support an attribute or cannot approximate a useful value,
then it MUST NOT return the attribute value and MUST NOT set the
attribute bit in the result bitmap. The server MUST return an error
if it supports an attribute on the target but cannot obtain its
value. In that case, no attribute values will be returned.
File systems that are absent should be treated as having support for
a very small set of attributes as described in Section 8.3.1 -- even
if previously, when the file system was present, more attributes were
supported.
Haynes & Noveck Standards Track PAGE 227
RFC 7530 NFSv4 March 2015
All servers MUST support the REQUIRED attributes, as specified in
Section 5, for all file systems, with the exception of absent file
systems.
On success, the current filehandle retains its value.
16.7.5. IMPLEMENTATION
Suppose there is an OPEN_DELEGATE_WRITE delegation held by another
client for the file in question, and size and/or change are among the
set of attributes being interrogated. The server has two choices.
First, the server can obtain the actual current value of these
attributes from the client holding the delegation by using the
CB_GETATTR callback. Second, the server, particularly when the
delegated client is unresponsive, can recall the delegation in
question. The GETATTR MUST NOT proceed until one of the following
occurs:
o The requested attribute values are returned in the response to
CB_GETATTR.
o The OPEN_DELEGATE_WRITE delegation is returned.
o The OPEN_DELEGATE_WRITE delegation is revoked.
Unless one of the above happens very quickly, one or more
NFS4ERR_DELAY errors will be returned while a delegation is
outstanding.
Haynes & Noveck Standards Track PAGE 228
RFC 7530 NFSv4 March 2015
16.8. Operation 10: GETFH - Get Current Filehandle
16.8.1. SYNOPSIS
(cfh) -> filehandle
16.8.2. ARGUMENT
/* CURRENT_FH: */
void;
16.8.3. RESULT
struct GETFH4resok {
nfs_fh4 object;
};
union GETFH4res switch (nfsstat4 status) {
case NFS4_OK:
GETFH4resok resok4;
default:
void;
};
16.8.4. DESCRIPTION
This operation returns the current filehandle value.
On success, the current filehandle retains its value.
16.8.5. IMPLEMENTATION
Operations that change the current filehandle, like LOOKUP or CREATE,
do not automatically return the new filehandle as a result. For
instance, if a client needs to look up a directory entry and obtain
its filehandle, then the following request is needed.
PUTFH (directory filehandle)
LOOKUP (entry name)
GETFH
Haynes & Noveck Standards Track PAGE 229
RFC 7530 NFSv4 March 2015
16.9. Operation 11: LINK - Create Link to a File
16.9.1. SYNOPSIS
(sfh), (cfh), newname -> (cfh), cinfo
16.9.2. ARGUMENT
struct LINK4args {
/* SAVED_FH: source object */
/* CURRENT_FH: target directory */
component4 newname;
};
16.9.3. RESULT
struct LINK4resok {
change_info4 cinfo;
};
union LINK4res switch (nfsstat4 status) {
case NFS4_OK:
LINK4resok resok4;
default:
void;
};
16.9.4. DESCRIPTION
The LINK operation creates an additional newname for the file
represented by the saved filehandle, as set by the SAVEFH operation,
in the directory represented by the current filehandle. The existing
file and the target directory must reside within the same file system
on the server. On success, the current filehandle will continue to
be the target directory. If an object exists in the target directory
with the same name as newname, the server must return NFS4ERR_EXIST.
For the target directory, the server returns change_info4 information
in cinfo. With the atomic field of the change_info4 struct, the
server will indicate if the before and after change attributes were
obtained atomically with respect to the link creation.
If newname has a length of 0 (zero), or if newname does not obey the
UTF-8 definition, the error NFS4ERR_INVAL will be returned.
Haynes & Noveck Standards Track PAGE 230
RFC 7530 NFSv4 March 2015
16.9.5. IMPLEMENTATION
Changes to any property of the "hard" linked files are reflected in
all of the linked files. When a link is made to a file, the
attributes for the file should have a value for numlinks that is one
greater than the value before the LINK operation.
The statement "file and the target directory must reside within the
same file system on the server" means that the fsid fields in the
attributes for the objects are the same. If they reside on different
file systems, the error NFS4ERR_XDEV is returned. This error may be
returned by some servers when there is an internal partitioning of a
file system that the LINK operation would violate.
On some servers, "." and ".." are illegal values for newname, and the
error NFS4ERR_BADNAME will be returned if they are specified.
When the current filehandle designates a named attribute directory
and the object to be linked (the saved filehandle) is not a named
attribute for the same object, the error NFS4ERR_XDEV MUST be
returned. When the saved filehandle designates a named attribute and
the current filehandle is not the appropriate named attribute
directory, the error NFS4ERR_XDEV MUST also be returned.
When the current filehandle designates a named attribute directory
and the object to be linked (the saved filehandle) is a named
attribute within that directory, the server MAY return the error
NFS4ERR_NOTSUPP.
In the case that newname is already linked to the file represented by
the saved filehandle, the server will return NFS4ERR_EXIST.
Note that symbolic links are created with the CREATE operation.
Haynes & Noveck Standards Track PAGE 231
RFC 7530 NFSv4 March 2015
16.10. Operation 12: LOCK - Create Lock
16.10.1. SYNOPSIS
(cfh) locktype, reclaim, offset, length, locker -> stateid
16.10.2. ARGUMENT
enum nfs_lock_type4 {
READ_LT = 1,
WRITE_LT = 2,
READW_LT = 3, /* blocking read */
WRITEW_LT = 4 /* blocking write */
};
/*
* For LOCK, transition from open_owner to new lock_owner
*/
struct open_to_lock_owner4 {
seqid4 open_seqid;
stateid4 open_stateid;
seqid4 lock_seqid;
lock_owner4 lock_owner;
};
/*
* For LOCK, existing lock_owner continues to request file locks
*/
struct exist_lock_owner4 {
stateid4 lock_stateid;
seqid4 lock_seqid;
};
union locker4 switch (bool new_lock_owner) {
case TRUE:
open_to_lock_owner4 open_owner;
case FALSE:
exist_lock_owner4 lock_owner;
};
Haynes & Noveck Standards Track PAGE 232
RFC 7530 NFSv4 March 2015
/*
* LOCK/LOCKT/LOCKU: Record lock management
*/
struct LOCK4args {
/* CURRENT_FH: file */
nfs_lock_type4 locktype;
bool reclaim;
offset4 offset;
length4 length;
locker4 locker;
};
16.10.3. RESULT
struct LOCK4denied {
offset4 offset;
length4 length;
nfs_lock_type4 locktype;
lock_owner4 owner;
};
struct LOCK4resok {
stateid4 lock_stateid;
};
union LOCK4res switch (nfsstat4 status) {
case NFS4_OK:
LOCK4resok resok4;
case NFS4ERR_DENIED:
LOCK4denied denied;
default:
void;
};
16.10.4. DESCRIPTION
The LOCK operation requests a byte-range lock for the byte range
specified by the offset and length parameters. The lock type is also
specified to be one of the nfs_lock_type4s. If this is a reclaim
request, the reclaim parameter will be TRUE.
Bytes in a file may be locked even if those bytes are not currently
allocated to the file. To lock the file from a specific offset
through the end-of-file (no matter how long the file actually is),
use a length field with all bits set to 1 (one). If the length is
zero, or if a length that is not all bits set to one is specified,
and the length when added to the offset exceeds the maximum 64-bit
unsigned integer value, the error NFS4ERR_INVAL will result.
Haynes & Noveck Standards Track PAGE 233
RFC 7530 NFSv4 March 2015
32-bit servers are servers that support locking for byte offsets that
fit within 32 bits (i.e., less than or equal to NFS4_UINT32_MAX). If
the client specifies a range that overlaps one or more bytes beyond
offset NFS4_UINT32_MAX but does not end at offset NFS4_UINT64_MAX,
then such a 32-bit server MUST return the error NFS4ERR_BAD_RANGE.
In the case that the lock is denied, the owner, offset, and length of
a conflicting lock are returned.
On success, the current filehandle retains its value.
16.10.5. IMPLEMENTATION
If the server is unable to determine the exact offset and length of
the conflicting lock, the same offset and length that were provided
in the arguments should be returned in the denied results. Section 9
contains a full description of this and the other file locking
operations.
LOCK operations are subject to permission checks and to checks
against the access type of the associated file. However, the
specific rights and modes required for various types of locks
reflect the semantics of the server-exported file system, and are not
specified by the protocol. For example, Windows 2000 allows a write
lock of a file open for READ, while a POSIX-compliant system
does not.
When the client makes a lock request that corresponds to a range that
the lock-owner has locked already (with the same or different lock
type), or to a sub-region of such a range, or to a region that
includes multiple locks already granted to that lock-owner, in whole
or in part, and the server does not support such locking operations
(i.e., does not support POSIX locking semantics), the server will
return the error NFS4ERR_LOCK_RANGE. In that case, the client may
return an error, or it may emulate the required operations, using
only LOCK for ranges that do not include any bytes already locked by
that lock-owner and LOCKU of locks held by that lock-owner
(specifying an exactly matching range and type). Similarly, when the
client makes a lock request that amounts to upgrading (changing from
a read lock to a write lock) or downgrading (changing from a write
lock to a read lock) an existing record lock and the server does not
support such a lock, the server will return NFS4ERR_LOCK_NOTSUPP.
Such operations may not perfectly reflect the required semantics in
the face of conflicting lock requests from other clients.
When a client holds an OPEN_DELEGATE_WRITE delegation, the client
holding that delegation is assured that there are no opens by other
clients. Thus, there can be no conflicting LOCK operations from such
Haynes & Noveck Standards Track PAGE 234
RFC 7530 NFSv4 March 2015
clients. Therefore, the client may be handling locking requests
locally, without doing LOCK operations on the server. If it does
that, it must be prepared to update the lock status on the server by
sending appropriate LOCK and LOCKU operations before returning the
delegation.
When one or more clients hold OPEN_DELEGATE_READ delegations, any
LOCK operation where the server is implementing mandatory locking
semantics MUST result in the recall of all such delegations. The
LOCK operation may not be granted until all such delegations are
returned or revoked. Except where this happens very quickly, one or
more NFS4ERR_DELAY errors will be returned to requests made while the
delegation remains outstanding.
The locker argument specifies the lock-owner that is associated with
the LOCK request. The locker4 structure is a switched union that
indicates whether the client has already created byte-range locking
state associated with the current open file and lock-owner. There
are multiple cases to be considered, corresponding to possible
combinations of whether locking state has been created for the
current open file and lock-owner, and whether the boolean
new_lock_owner is set. In all of the cases, there is a lock_seqid
specified, whether the lock-owner is specified explicitly or
implicitly. This seqid value is used for checking lock-owner
sequencing/replay issues. When the given lock-owner is not known to
the server, this establishes an initial sequence value for the new
lock-owner.
o In the case in which the state has been created and the boolean is
false, the only part of the argument other than lock_seqid is just
a stateid representing the set of locks associated with that open
file and lock-owner.
o In the case in which the state has been created and the boolean is
true, the server rejects the request with the error
NFS4ERR_BAD_SEQID. The only exception is where there is a
retransmission of a previous request in which the boolean was
true. In this case, the lock_seqid will match the original
request, and the response will reflect the final case, below.
o In the case where no byte-range locking state has been established
and the boolean is true, the argument contains an
open_to_lock_owner structure that specifies the stateid of the
open file and the lock-owner to be used for the lock. Note that
although the open-owner is not given explicitly, the open_seqid
associated with it is used to check for open-owner sequencing
issues. This case provides a method to use the established state
of the open_stateid to transition to the use of a lock stateid.
Haynes & Noveck Standards Track PAGE 235
RFC 7530 NFSv4 March 2015
16.11. Operation 13: LOCKT - Test for Lock
16.11.1. SYNOPSIS
(cfh) locktype, offset, length, owner -> {void, NFS4ERR_DENIED ->
owner}
16.11.2. ARGUMENT
struct LOCKT4args {
/* CURRENT_FH: file */
nfs_lock_type4 locktype;
offset4 offset;
length4 length;
lock_owner4 owner;
};
16.11.3. RESULT
union LOCKT4res switch (nfsstat4 status) {
case NFS4ERR_DENIED:
LOCK4denied denied;
case NFS4_OK:
void;
default:
void;
};
16.11.4. DESCRIPTION
The LOCKT operation tests the lock as specified in the arguments. If
a conflicting lock exists, the owner, offset, length, and type of the
conflicting lock are returned; if no lock is held, nothing other than
NFS4_OK is returned. Lock types READ_LT and READW_LT are processed
in the same way in that a conflicting lock test is done without
regard to blocking or non-blocking. The same is true for WRITE_LT
and WRITEW_LT.
The ranges are specified as for LOCK. The NFS4ERR_INVAL and
NFS4ERR_BAD_RANGE errors are returned under the same circumstances as
for LOCK.
On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 236
RFC 7530 NFSv4 March 2015
16.11.5. IMPLEMENTATION
If the server is unable to determine the exact offset and length of
the conflicting lock, the same offset and length that were provided
in the arguments should be returned in the denied results. Section 9
contains further discussion of the file locking mechanisms.
LOCKT uses a lock_owner4, rather than a stateid4 as is used in LOCK,
to identify the owner. This is because the client does not have to
open the file to test for the existence of a lock, so a stateid may
not be available.
The test for conflicting locks SHOULD exclude locks for the current
lock-owner. Note that since such locks are not examined the possible
existence of overlapping ranges may not affect the results of LOCKT.
If the server does examine locks that match the lock-owner for the
purpose of range checking, NFS4ERR_LOCK_RANGE may be returned. In
the event that it returns NFS4_OK, clients may do a LOCK and receive
NFS4ERR_LOCK_RANGE on the LOCK request because of the flexibility
provided to the server.
When a client holds an OPEN_DELEGATE_WRITE delegation, it may choose
(see Section 16.10.5) to handle LOCK requests locally. In such a
case, LOCKT requests will similarly be handled locally.
Haynes & Noveck Standards Track PAGE 237
RFC 7530 NFSv4 March 2015
16.12. Operation 14: LOCKU - Unlock File
16.12.1. SYNOPSIS
(cfh) type, seqid, stateid, offset, length -> stateid
16.12.2. ARGUMENT
struct LOCKU4args {
/* CURRENT_FH: file */
nfs_lock_type4 locktype;
seqid4 seqid;
stateid4 lock_stateid;
offset4 offset;
length4 length;
};
16.12.3. RESULT
union LOCKU4res switch (nfsstat4 status) {
case NFS4_OK:
stateid4 lock_stateid;
default:
void;
};
16.12.4. DESCRIPTION
The LOCKU operation unlocks the byte-range lock specified by the
parameters. The client may set the locktype field to any value that
is legal for the nfs_lock_type4 enumerated type, and the server MUST
accept any legal value for locktype. Any legal value for locktype
has no effect on the success or failure of the LOCKU operation.
The ranges are specified as for LOCK. The NFS4ERR_INVAL and
NFS4ERR_BAD_RANGE errors are returned under the same circumstances as
for LOCK.
On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 238
RFC 7530 NFSv4 March 2015
16.12.5. IMPLEMENTATION
If the area to be unlocked does not correspond exactly to a lock
actually held by the lock-owner, the server may return the error
NFS4ERR_LOCK_RANGE. This includes the cases where (1) the area is
not locked, (2) the area is a sub-range of the area locked, (3) it
overlaps the area locked without matching exactly, or (4) the area
specified includes multiple locks held by the lock-owner. In all of
these cases, allowed by POSIX locking [fcntl] semantics, a client
receiving this error should, if it desires support for such
operations, simulate the operation using LOCKU on ranges
corresponding to locks it actually holds, possibly followed by LOCK
requests for the sub-ranges not being unlocked.
When a client holds an OPEN_DELEGATE_WRITE delegation, it may choose
(see Section 16.10.5) to handle LOCK requests locally. In such a
case, LOCKU requests will similarly be handled locally.
Haynes & Noveck Standards Track PAGE 239
RFC 7530 NFSv4 March 2015
16.13. Operation 15: LOOKUP - Look Up Filename
16.13.1. SYNOPSIS
(cfh), component -> (cfh)
16.13.2. ARGUMENT
struct LOOKUP4args {
/* CURRENT_FH: directory */
component4 objname;
};
16.13.3. RESULT
struct LOOKUP4res {
/* CURRENT_FH: object */
nfsstat4 status;
};
16.13.4. DESCRIPTION
This operation performs a LOOKUP or finds a file system object using
the directory specified by the current filehandle. LOOKUP evaluates
the component and if the object exists the current filehandle is
replaced with the component's filehandle.
If the component cannot be evaluated because either it does not exist
or the client does not have permission to evaluate it, then an error
will be returned, and the current filehandle will be unchanged.
If the component is of zero length, NFS4ERR_INVAL will be returned.
The component is also subject to the normal UTF-8, character support,
and name checks. See Section 12.7 for further discussion.
Haynes & Noveck Standards Track PAGE 240
RFC 7530 NFSv4 March 2015
16.13.5. IMPLEMENTATION
If the client wants to achieve the effect of a multi-component
lookup, it may construct a COMPOUND request such as the following
(and obtain each filehandle):
PUTFH (directory filehandle)
LOOKUP "pub"
GETFH
LOOKUP "foo"
GETFH
LOOKUP "bar"
GETFH
NFSv4 servers depart from the semantics of previous NFS versions in
allowing LOOKUP requests to cross mount points on the server. The
client can detect a mount point crossing by comparing the fsid
attribute of the directory with the fsid attribute of the directory
looked up. If the fsids are different, then the new directory is a
server mount point. UNIX clients that detect a mount point crossing
will need to mount the server's file system. This needs to be done
to maintain the file object identity-checking mechanisms common to
UNIX clients.
Servers that limit NFS access to "shares" or "exported" file systems
should provide a pseudo-file system into which the exported file
systems can be integrated, so that clients can browse the server's
namespace. The clients' view of a pseudo-file system will be limited
to paths that lead to exported file systems.
Note: Previous versions of the protocol assigned special semantics to
the names "." and "..". NFSv4 assigns no special semantics to these
names. The LOOKUPP operator must be used to look up a parent
directory.
Note that this operation does not follow symbolic links. The client
is responsible for all parsing of filenames, including filenames that
are modified by symbolic links encountered during the lookup process.
If the current filehandle supplied is not a directory but a symbolic
link, NFS4ERR_SYMLINK is returned as the error. For all other
non-directory file types, the error NFS4ERR_NOTDIR is returned.
Haynes & Noveck Standards Track PAGE 241
RFC 7530 NFSv4 March 2015
16.14. Operation 16: LOOKUPP - Look Up Parent Directory
16.14.1. SYNOPSIS
(cfh) -> (cfh)
16.14.2. ARGUMENT
/* CURRENT_FH: object */
void;
16.14.3. RESULT
struct LOOKUPP4res {
/* CURRENT_FH: directory */
nfsstat4 status;
};
16.14.4. DESCRIPTION
The current filehandle is assumed to refer to a regular directory or
a named attribute directory. LOOKUPP assigns the filehandle for its
parent directory to be the current filehandle. If there is no parent
directory, an NFS4ERR_NOENT error must be returned. Therefore,
NFS4ERR_NOENT will be returned by the server when the current
filehandle is at the root or top of the server's file tree.
16.14.5. IMPLEMENTATION
As for LOOKUP, LOOKUPP will also cross mount points.
If the current filehandle is not a directory or named attribute
directory, the error NFS4ERR_NOTDIR is returned.
If the current filehandle is a named attribute directory that is
associated with a file system object via OPENATTR (i.e., not a
subdirectory of a named attribute directory), LOOKUPP SHOULD return
the filehandle of the associated file system object.
Haynes & Noveck Standards Track PAGE 242
RFC 7530 NFSv4 March 2015
16.15. Operation 17: NVERIFY - Verify Difference in Attributes
16.15.1. SYNOPSIS
(cfh), fattr -> -
16.15.2. ARGUMENT
struct NVERIFY4args {
/* CURRENT_FH: object */
fattr4 obj_attributes;
};
16.15.3. RESULT
struct NVERIFY4res {
nfsstat4 status;
};
16.15.4. DESCRIPTION
This operation is used to prefix a sequence of operations to be
performed if one or more attributes have changed on some file system
object. If all the attributes match, then the error NFS4ERR_SAME
must be returned.
On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 243
RFC 7530 NFSv4 March 2015
16.15.5. IMPLEMENTATION
This operation is useful as a cache validation operator. If the
object to which the attributes belong has changed, then the following
operations may obtain new data associated with that object -- for
instance, to check if a file has been changed and obtain new data if
it has:
PUTFH (public)
LOOKUP "foobar"
NVERIFY attrbits attrs
READ 0 32767
In the case that a RECOMMENDED attribute is specified in the NVERIFY
operation and the server does not support that attribute for the file
system object, the error NFS4ERR_ATTRNOTSUPP is returned to the
client.
When the attribute rdattr_error or any write-only attribute (e.g.,
time_modify_set) is specified, the error NFS4ERR_INVAL is returned to
the client.
Haynes & Noveck Standards Track PAGE 244
RFC 7530 NFSv4 March 2015
16.16. Operation 18: OPEN - Open a Regular File
16.16.1. SYNOPSIS
(cfh), seqid, share_access, share_deny, owner, openhow, claim ->
(cfh), stateid, cinfo, rflags, attrset, delegation
16.16.2. ARGUMENT
/*
* Various definitions for OPEN
*/
enum createmode4 {
UNCHECKED4 = 0,
GUARDED4 = 1,
EXCLUSIVE4 = 2
};
union createhow4 switch (createmode4 mode) {
case UNCHECKED4:
case GUARDED4:
fattr4 createattrs;
case EXCLUSIVE4:
verifier4 createverf;
};
enum opentype4 {
OPEN4_NOCREATE = 0,
OPEN4_CREATE = 1
};
union openflag4 switch (opentype4 opentype) {
case OPEN4_CREATE:
createhow4 how;
default:
void;
};
Haynes & Noveck Standards Track PAGE 245
RFC 7530 NFSv4 March 2015
/* Next definitions used for OPEN delegation */
enum limit_by4 {
NFS_LIMIT_SIZE = 1,
NFS_LIMIT_BLOCKS = 2
/* others as needed */
};
struct nfs_modified_limit4 {
uint32_t num_blocks;
uint32_t bytes_per_block;
};
union nfs_space_limit4 switch (limit_by4 limitby) {
/* limit specified as file size */
case NFS_LIMIT_SIZE:
uint64_t filesize;
/* limit specified by number of blocks */
case NFS_LIMIT_BLOCKS:
nfs_modified_limit4 mod_blocks;
};
enum open_delegation_type4 {
OPEN_DELEGATE_NONE = 0,
OPEN_DELEGATE_READ = 1,
OPEN_DELEGATE_WRITE = 2
};
enum open_claim_type4 {
CLAIM_NULL = 0,
CLAIM_PREVIOUS = 1,
CLAIM_DELEGATE_CUR = 2,
CLAIM_DELEGATE_PREV = 3
};
struct open_claim_delegate_cur4 {
stateid4 delegate_stateid;
component4 file;
};
Haynes & Noveck Standards Track PAGE 246
RFC 7530 NFSv4 March 2015
union open_claim4 switch (open_claim_type4 claim) {
/*
* No special rights to file.
* Ordinary OPEN of the specified file.
*/
case CLAIM_NULL:
/* CURRENT_FH: directory */
component4 file;
/*
* Right to the file established by an
* open previous to server reboot. File
* identified by filehandle obtained at
* that time rather than by name.
*/
case CLAIM_PREVIOUS:
/* CURRENT_FH: file being reclaimed */
open_delegation_type4 delegate_type;
/*
* Right to file based on a delegation
* granted by the server. File is
* specified by name.
*/
case CLAIM_DELEGATE_CUR:
/* CURRENT_FH: directory */
open_claim_delegate_cur4 delegate_cur_info;
/*
* Right to file based on a delegation
* granted to a previous boot instance
* of the client. File is specified by name.
*/
case CLAIM_DELEGATE_PREV:
/* CURRENT_FH: directory */
component4 file_delegate_prev;
};
/*
* OPEN: Open a file, potentially receiving an open delegation
*/
struct OPEN4args {
seqid4 seqid;
uint32_t share_access;
uint32_t share_deny;
open_owner4 owner;
openflag4 openhow;
open_claim4 claim;
};
Haynes & Noveck Standards Track PAGE 247
RFC 7530 NFSv4 March 2015
16.16.3. RESULT
struct open_read_delegation4 {
stateid4 stateid; /* Stateid for delegation */
bool recall; /* Pre-recalled flag for
delegations obtained
by reclaim (CLAIM_PREVIOUS) */
nfsace4 permissions; /* Defines users who don't
need an ACCESS call to
open for read */
};
struct open_write_delegation4 {
stateid4 stateid; /* Stateid for delegation */
bool recall; /* Pre-recalled flag for
delegations obtained
by reclaim
(CLAIM_PREVIOUS) */
nfs_space_limit4
space_limit; /* Defines condition that
the client must check to
determine whether the
file needs to be flushed
to the server on close */
nfsace4 permissions; /* Defines users who don't
need an ACCESS call as
part of a delegated
open */
};
union open_delegation4 switch
(open_delegation_type4 delegation_type) {
case OPEN_DELEGATE_NONE:
void;
case OPEN_DELEGATE_READ:
open_read_delegation4 read;
case OPEN_DELEGATE_WRITE:
open_write_delegation4 write;
};
/*
* Result flags
*/
Haynes & Noveck Standards Track PAGE 248
RFC 7530 NFSv4 March 2015
/* Client must confirm open */
const OPEN4_RESULT_CONFIRM = 0x00000002;
/* Type of file locking behavior at the server */
const OPEN4_RESULT_LOCKTYPE_POSIX = 0x00000004;
struct OPEN4resok {
stateid4 stateid; /* Stateid for open */
change_info4 cinfo; /* Directory change info */
uint32_t rflags; /* Result flags */
bitmap4 attrset; /* attribute set for create */
open_delegation4 delegation; /* Info on any open
delegation */
};
union OPEN4res switch (nfsstat4 status) {
case NFS4_OK:
/* CURRENT_FH: opened file */
OPEN4resok resok4;
default:
void;
};
16.16.4. Warning to Client Implementers
OPEN resembles LOOKUP in that it generates a filehandle for the
client to use. Unlike LOOKUP, though, OPEN creates server state on
the filehandle. In normal circumstances, the client can only release
this state with a CLOSE operation. CLOSE uses the current filehandle
to determine which file to close. Therefore, the client MUST follow
every OPEN operation with a GETFH operation in the same COMPOUND
procedure. This will supply the client with the filehandle such that
CLOSE can be used appropriately.
Simply waiting for the lease on the file to expire is insufficient
because the server may maintain the state indefinitely as long as
another client does not attempt to make a conflicting access to the
same file.
16.16.5. DESCRIPTION
The OPEN operation creates and/or opens a regular file in a directory
with the provided name. If the file does not exist at the server and
creation is desired, specification of the method of creation is
provided by the openhow parameter. The client has the choice of
three creation methods: UNCHECKED4, GUARDED4, or EXCLUSIVE4.
Haynes & Noveck Standards Track PAGE 249
RFC 7530 NFSv4 March 2015
If the current filehandle is a named attribute directory, OPEN will
then create or open a named attribute file. Note that exclusive
create of a named attribute is not supported. If the createmode is
EXCLUSIVE4 and the current filehandle is a named attribute directory,
the server will return EINVAL.
UNCHECKED4 means that the file should be created if a file of that
name does not exist and encountering an existing regular file of that
name is not an error. For this type of create, createattrs specifies
the initial set of attributes for the file. The set of attributes
may include any writable attribute valid for regular files. When an
UNCHECKED4 create encounters an existing file, the attributes
specified by createattrs are not used, except that when a size of
zero is specified, the existing file is truncated. If GUARDED4 is
specified, the server checks for the presence of a duplicate object
by name before performing the create. If a duplicate exists, an
error of NFS4ERR_EXIST is returned as the status. If the object does
not exist, the request is performed as described for UNCHECKED4. For
each of these cases (UNCHECKED4 and GUARDED4), where the operation is
successful, the server will return to the client an attribute mask
signifying which attributes were successfully set for the object.
EXCLUSIVE4 specifies that the server is to follow exclusive creation
semantics, using the verifier to ensure exclusive creation of the
target. The server should check for the presence of a duplicate
object by name. If the object does not exist, the server creates the
object and stores the verifier with the object. If the object does
exist and the stored verifier matches the verifier provided by the
client, the server uses the existing object as the newly created
object. If the stored verifier does not match, then an error of
NFS4ERR_EXIST is returned. No attributes may be provided in this
case, since the server may use an attribute of the target object to
store the verifier. If the server uses an attribute to store the
exclusive create verifier, it will signify which attribute was used
by setting the appropriate bit in the attribute mask that is returned
in the results.
For the target directory, the server returns change_info4 information
in cinfo. With the atomic field of the change_info4 struct, the
server will indicate if the before and after change attributes were
obtained atomically with respect to the link creation.
Upon successful creation, the current filehandle is replaced by that
of the new object.
The OPEN operation provides for Windows share reservation capability
with the use of the share_access and share_deny fields of the OPEN
arguments. The client specifies at OPEN the required share_access
Haynes & Noveck Standards Track PAGE 250
RFC 7530 NFSv4 March 2015
and share_deny modes. For clients that do not directly support
SHAREs (i.e., UNIX), the expected deny value is DENY_NONE. In the
case that there is an existing share reservation that conflicts with
the OPEN request, the server returns the error NFS4ERR_SHARE_DENIED.
For a complete SHARE request, the client must provide values for the
owner and seqid fields for the OPEN argument. For additional
discussion of share semantics, see Section 9.9.
In the case that the client is recovering state from a server
failure, the claim field of the OPEN argument is used to signify that
the request is meant to reclaim state previously held.
The claim field of the OPEN argument is used to specify the file to
be opened and the state information that the client claims to
possess. There are four basic claim types that cover the various
situations for an OPEN. They are as follows:
CLAIM_NULL: For the client, this is a new OPEN request, and there is
no previous state associated with the file for the client.
CLAIM_PREVIOUS: The client is claiming basic OPEN state for a file
that was held previous to a server reboot. This is generally used
when a server is returning persistent filehandles; the client may
not have the filename to reclaim the OPEN.
CLAIM_DELEGATE_CUR: The client is claiming a delegation for OPEN as
granted by the server. This is generally done as part of
recalling a delegation.
CLAIM_DELEGATE_PREV: The client is claiming a delegation granted to
a previous client instance. This claim type is for use after a
SETCLIENTID_CONFIRM and before the corresponding DELEGPURGE in two
situations: after a client reboot and after a lease expiration
that resulted in loss of all lock state. The server MAY support
CLAIM_DELEGATE_PREV. If it does support CLAIM_DELEGATE_PREV,
SETCLIENTID_CONFIRM MUST NOT remove the client's delegation state,
and the server MUST support the DELEGPURGE operation.
The following errors apply to use of the CLAIM_DELEGATE_PREV claim
type:
o NFS4ERR_NOTSUPP is returned if the server does not support this
claim type.
o NFS4ERR_INVAL is returned if the reclaim is done at an
inappropriate time, e.g., after DELEGPURGE has been done.
Haynes & Noveck Standards Track PAGE 251
RFC 7530 NFSv4 March 2015
o NFS4ERR_BAD_RECLAIM is returned if the other error conditions do
not apply and the server has no record of the delegation whose
reclaim is being attempted.
For OPEN requests whose claim type is other than CLAIM_PREVIOUS
(i.e., requests other than those devoted to reclaiming opens after a
server reboot) that reach the server during its grace or lease
expiration period, the server returns an error of NFS4ERR_GRACE.
For any OPEN request, the server may return an open delegation, which
allows further opens and closes to be handled locally on the client
as described in Section 10.4. Note that delegation is up to the
server to decide. The client should never assume that delegation
will or will not be granted in a particular instance. It should
always be prepared for either case. A partial exception is the
reclaim (CLAIM_PREVIOUS) case, in which a delegation type is claimed.
In this case, delegation will always be granted, although the server
may specify an immediate recall in the delegation structure.
The rflags returned by a successful OPEN allow the server to return
information governing how the open file is to be handled.
OPEN4_RESULT_CONFIRM indicates that the client MUST execute an
OPEN_CONFIRM operation before using the open file.
OPEN4_RESULT_LOCKTYPE_POSIX indicates that the server's file locking
behavior supports the complete set of POSIX locking techniques
[fcntl]. From this, the client can choose to manage file locking
state in such a way as to handle a mismatch of file locking
management.
If the component is of zero length, NFS4ERR_INVAL will be returned.
The component is also subject to the normal UTF-8, character support,
and name checks. See Section 12.7 for further discussion.
When an OPEN is done and the specified open-owner already has the
resulting filehandle open, the result is to "OR" together the new
share and deny status, together with the existing status. In this
case, only a single CLOSE need be done, even though multiple OPENs
were completed. When such an OPEN is done, checking of share
reservations for the new OPEN proceeds normally, with no exception
for the existing OPEN held by the same owner. In this case, the
stateid returned has an "other" field that matches that of the
previous open, while the seqid field is incremented to reflect the
changed status due to the new open (Section 9.1.4).
Haynes & Noveck Standards Track PAGE 252
RFC 7530 NFSv4 March 2015
If the underlying file system at the server is only accessible in a
read-only mode and the OPEN request has specified
OPEN4_SHARE_ACCESS_WRITE or OPEN4_SHARE_ACCESS_BOTH, the server will
return NFS4ERR_ROFS to indicate a read-only file system.
As with the CREATE operation, the server MUST derive the owner, owner
ACE, group, or group ACE if any of the four attributes are required
and supported by the server's file system. For an OPEN with the
EXCLUSIVE4 createmode, the server has no choice, since such OPEN
calls do not include the createattrs field. Conversely, if
createattrs is specified and includes owner or group (or
corresponding ACEs) that the principal in the RPC's credentials does
not have authorization to create files for, then the server may
return NFS4ERR_PERM.
In the case where an OPEN specifies a size of zero (e.g., truncation)
and the file has named attributes, the named attributes are left as
is. They are not removed.
16.16.6. IMPLEMENTATION
The OPEN operation contains support for EXCLUSIVE4 create. The
mechanism is similar to the support in NFSv3 [RFC 1813]. As in NFSv3,
this mechanism provides reliable exclusive creation. Exclusive
create is invoked when the how parameter is EXCLUSIVE4. In this
case, the client provides a verifier that can reasonably be expected
to be unique. A combination of a client identifier, perhaps the
client network address, and a unique number generated by the client,
perhaps the RPC transaction identifier, may be appropriate.
If the object does not exist, the server creates the object and
stores the verifier in stable storage. For file systems that do not
provide a mechanism for the storage of arbitrary file attributes, the
server may use one or more elements of the object metadata to store
the verifier. The verifier must be stored in stable storage to
prevent erroneous failure on retransmission of the request. It is
assumed that an exclusive create is being performed because exclusive
semantics are critical to the application. Because of the expected
usage, exclusive create does not rely solely on the normally volatile
duplicate request cache for storage of the verifier. The duplicate
request cache in volatile storage does not survive a crash and may
actually flush on a long network partition, opening failure windows.
In the UNIX local file system environment, the expected storage
location for the verifier on creation is the metadata (timestamps) of
the object. For this reason, an exclusive object create may not
include initial attributes because the server would have nowhere to
store the verifier.
Haynes & Noveck Standards Track PAGE 253
RFC 7530 NFSv4 March 2015
If the server cannot support these exclusive create semantics,
possibly because of the requirement to commit the verifier to stable
storage, it should fail the OPEN request with the error
NFS4ERR_NOTSUPP.
During an exclusive CREATE request, if the object already exists, the
server reconstructs the object's verifier and compares it with the
verifier in the request. If they match, the server treats the
request as a success. The request is presumed to be a duplicate of
an earlier, successful request for which the reply was lost and that
the server duplicate request cache mechanism did not detect. If the
verifiers do not match, the request is rejected with the status
NFS4ERR_EXIST.
Once the client has performed a successful exclusive create, it must
issue a SETATTR to set the correct object attributes. Until it does
so, it should not rely upon any of the object attributes, since the
server implementation may need to overload object metadata to store
the verifier. The subsequent SETATTR must not occur in the same
COMPOUND request as the OPEN. This separation will guarantee that
the exclusive create mechanism will continue to function properly in
the face of retransmission of the request.
Use of the GUARDED4 attribute does not provide "exactly-once"
semantics. In particular, if a reply is lost and the server does not
detect the retransmission of the request, the operation can fail with
NFS4ERR_EXIST, even though the create was performed successfully.
The client would use this behavior in the case that the application
has not requested an exclusive create but has asked to have the file
truncated when the file is opened. In the case of the client timing
out and retransmitting the create request, the client can use
GUARDED4 to prevent a sequence such as create, write, create
(retransmitted) from occurring.
For share reservations (see Section 9.9), the client must specify a
value for share_access that is one of OPEN4_SHARE_ACCESS_READ,
OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH. For
share_deny, the client must specify one of OPEN4_SHARE_DENY_NONE,
OPEN4_SHARE_DENY_READ, OPEN4_SHARE_DENY_WRITE, or
OPEN4_SHARE_DENY_BOTH. If the client fails to do this, the server
must return NFS4ERR_INVAL.
Based on the share_access value (OPEN4_SHARE_ACCESS_READ,
OPEN4_SHARE_ACCESS_WRITE, or OPEN4_SHARE_ACCESS_BOTH), the client
should check that the requester has the proper access rights to
perform the specified operation. This would generally be the results
of applying the ACL access rules to the file for the current
requester. However, just as with the ACCESS operation, the client
Haynes & Noveck Standards Track PAGE 254
RFC 7530 NFSv4 March 2015
should not attempt to second-guess the server's decisions, as access
rights may change and may be subject to server administrative
controls outside the ACL framework. If the requester is not
authorized to READ or WRITE (depending on the share_access value),
the server must return NFS4ERR_ACCESS. Note that since the NFSv4
protocol does not impose any requirement that READs and WRITEs issued
for an open file have the same credentials as the OPEN itself, the
server still must do appropriate access checking on the READs and
WRITEs themselves.
If the component provided to OPEN resolves to something other than a
regular file (or a named attribute), an error will be returned to the
client. If it is a directory, NFS4ERR_ISDIR is returned; otherwise,
NFS4ERR_SYMLINK is returned. Note that NFS4ERR_SYMLINK is returned
for both symlinks and for special files of other types; NFS4ERR_INVAL
would be inappropriate, since the arguments provided by the client
were correct, and the client cannot necessarily know at the time it
sent the OPEN that the component would resolve to a non-regular file.
If the current filehandle is not a directory, the error
NFS4ERR_NOTDIR will be returned.
If a COMPOUND contains an OPEN that establishes an
OPEN_DELEGATE_WRITE delegation, then subsequent GETATTRs normally
result in a CB_GETATTR being sent to the client holding the
delegation. However, in the case in which the OPEN and GETATTR are
part of the same COMPOUND, the server SHOULD understand that the
operations are for the same client ID and avoid querying the client,
which will not be able to respond. This sequence of OPEN and GETATTR
SHOULD be understood to be the retrieval of the size and change
attributes at the time of OPEN. Further, as explained in
Section 15.2.5, the client should not construct a COMPOUND that mixes
operations for different client IDs.
Haynes & Noveck Standards Track PAGE 255
RFC 7530 NFSv4 March 2015
16.17. Operation 19: OPENATTR - Open Named Attribute Directory
16.17.1. SYNOPSIS
(cfh) createdir -> (cfh)
16.17.2. ARGUMENT
struct OPENATTR4args {
/* CURRENT_FH: object */
bool createdir;
};
16.17.3. RESULT
struct OPENATTR4res {
/* CURRENT_FH: named attr directory */
nfsstat4 status;
};
16.17.4. DESCRIPTION
The OPENATTR operation is used to obtain the filehandle of the named
attribute directory associated with the current filehandle. The
result of the OPENATTR will be a filehandle to an object of type
NF4ATTRDIR. From this filehandle, READDIR and LOOKUP operations can
be used to obtain filehandles for the various named attributes
associated with the original file system object. Filehandles
returned within the named attribute directory will have a type of
NF4NAMEDATTR.
The createdir argument allows the client to signify if a named
attribute directory should be created as a result of the OPENATTR
operation. Some clients may use the OPENATTR operation with a value
of FALSE for createdir to determine if any named attributes exist for
the object. If none exist, then NFS4ERR_NOENT will be returned. If
createdir has a value of TRUE and no named attribute directory
exists, one is created. The creation of a named attribute directory
assumes that the server has implemented named attribute support in
this fashion and is not required to do so by this definition.
16.17.5. IMPLEMENTATION
If the server does not support named attributes for the current
filehandle, an error of NFS4ERR_NOTSUPP will be returned to the
client.
Haynes & Noveck Standards Track PAGE 256
RFC 7530 NFSv4 March 2015
16.18. Operation 20: OPEN_CONFIRM - Confirm Open
16.18.1. SYNOPSIS
(cfh), seqid, stateid -> stateid
16.18.2. ARGUMENT
struct OPEN_CONFIRM4args {
/* CURRENT_FH: opened file */
stateid4 open_stateid;
seqid4 seqid;
};
16.18.3. RESULT
struct OPEN_CONFIRM4resok {
stateid4 open_stateid;
};
union OPEN_CONFIRM4res switch (nfsstat4 status) {
case NFS4_OK:
OPEN_CONFIRM4resok resok4;
default:
void;
};
16.18.4. DESCRIPTION
This operation is used to confirm the sequence id usage for the first
time that an open-owner is used by a client. The stateid returned
from the OPEN operation is used as the argument for this operation
along with the next sequence id for the open-owner. The sequence id
passed to the OPEN_CONFIRM must be 1 (one) greater than the seqid
passed to the OPEN operation (Section 9.1.4). If the server receives
an unexpected sequence id with respect to the original OPEN, then the
server assumes that the client will not confirm the original OPEN and
all state associated with the original OPEN is released by the
server.
On success, the current filehandle retains its value.
16.18.5. IMPLEMENTATION
A given client might generate many open_owner4 data structures for a
given client ID. The client will periodically either dispose of its
open_owner4s or stop using them for indefinite periods of time. The
latter situation is why the NFSv4 protocol does not have an explicit
Haynes & Noveck Standards Track PAGE 257
RFC 7530 NFSv4 March 2015
operation to exit an open_owner4: such an operation is of no use in
that situation. Instead, to avoid unbounded memory use, the server
needs to implement a strategy for disposing of open_owner4s that have
no current open state for any files and have not been used recently.
The time period used to determine when to dispose of open_owner4s is
an implementation choice. The time period should certainly be no
less than the lease time plus any grace period the server wishes to
implement beyond a lease time. The OPEN_CONFIRM operation allows the
server to safely dispose of unused open_owner4 data structures.
In the case that a client issues an OPEN operation and the server no
longer has a record of the open_owner4, the server needs to ensure
that this is a new OPEN and not a replay or retransmission.
Servers MUST NOT require confirmation on OPENs that grant delegations
or are doing reclaim operations. See Section 9.1.11 for details.
The server can easily avoid this by noting whether it has disposed of
one open_owner4 for the given client ID. If the server does not
support delegation, it might simply maintain a single bit that notes
whether any open_owner4 (for any client) has been disposed of.
The server must hold unconfirmed OPEN state until one of three events
occurs. First, the client sends an OPEN_CONFIRM request with the
appropriate sequence id and stateid within the lease period. In this
case, the OPEN state on the server goes to confirmed, and the
open_owner4 on the server is fully established.
Second, the client sends another OPEN request with a sequence id that
is incorrect for the open_owner4 (out of sequence). In this case,
the server assumes the second OPEN request is valid and the first one
is a replay. The server cancels the OPEN state of the first OPEN
request, establishes an unconfirmed OPEN state for the second OPEN
request, and responds to the second OPEN request with an indication
that an OPEN_CONFIRM is needed. The process then repeats itself.
While there is a potential for a denial-of-service attack on the
client, it is mitigated if the client and server require the use of a
security flavor based on Kerberos V5 or some other flavor that uses
cryptography.
What if the server is in the unconfirmed OPEN state for a given
open_owner4, and it receives an operation on the open_owner4 that has
a stateid but the operation is not OPEN, or it is OPEN_CONFIRM but
with the wrong stateid? Then, even if the seqid is correct, the
server returns NFS4ERR_BAD_STATEID, because the server assumes the
operation is a replay: if the server has no established OPEN state,
then there is no way, for example, a LOCK operation could be valid.
Haynes & Noveck Standards Track PAGE 258
RFC 7530 NFSv4 March 2015
Third, neither of the two aforementioned events occurs for the
open_owner4 within the lease period. In this case, the OPEN state is
canceled and disposal of the open_owner4 can occur.
Haynes & Noveck Standards Track PAGE 259
RFC 7530 NFSv4 March 2015
16.19. Operation 21: OPEN_DOWNGRADE - Reduce Open File Access
16.19.1. SYNOPSIS
(cfh), stateid, seqid, access, deny -> stateid
16.19.2. ARGUMENT
struct OPEN_DOWNGRADE4args {
/* CURRENT_FH: opened file */
stateid4 open_stateid;
seqid4 seqid;
uint32_t share_access;
uint32_t share_deny;
};
16.19.3. RESULT
struct OPEN_DOWNGRADE4resok {
stateid4 open_stateid;
};
union OPEN_DOWNGRADE4res switch (nfsstat4 status) {
case NFS4_OK:
OPEN_DOWNGRADE4resok resok4;
default:
void;
};
Haynes & Noveck Standards Track PAGE 260
RFC 7530 NFSv4 March 2015
16.19.4. DESCRIPTION
This operation is used to adjust the share_access and share_deny bits
for a given open. This is necessary when a given open-owner opens
the same file multiple times with different share_access and
share_deny flags. In this situation, a close of one of the opens may
change the appropriate share_access and share_deny flags to remove
bits associated with opens no longer in effect.
The share_access and share_deny bits specified in this operation
replace the current ones for the specified open file. The
share_access and share_deny bits specified must be exactly equal to
the union of the share_access and share_deny bits specified for some
subset of the OPENs in effect for the current open-owner on the
current file. If that constraint is not respected, the error
NFS4ERR_INVAL should be returned. Since share_access and share_deny
bits are subsets of those already granted, it is not possible for
this request to be denied because of conflicting share reservations.
As the OPEN_DOWNGRADE may change a file to be not-open-for-write and
a write byte-range lock might be held, the server may have to reject
the OPEN_DOWNGRADE with an NFS4ERR_LOCKS_HELD.
On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 261
RFC 7530 NFSv4 March 2015
16.20. Operation 22: PUTFH - Set Current Filehandle
16.20.1. SYNOPSIS
filehandle -> (cfh)
16.20.2. ARGUMENT
struct PUTFH4args {
nfs_fh4 object;
};
16.20.3. RESULT
struct PUTFH4res {
/* CURRENT_FH: */
nfsstat4 status;
};
16.20.4. DESCRIPTION
PUTFH replaces the current filehandle with the filehandle provided as
an argument.
If the security mechanism used by the requester does not meet the
requirements of the filehandle provided to this operation, the server
MUST return NFS4ERR_WRONGSEC.
See Section 15.2.4.1 for more details on the current filehandle.
16.20.5. IMPLEMENTATION
PUTFH is commonly used as the first operator in an NFS request to set
the context for operations that follow it.
Haynes & Noveck Standards Track PAGE 262
RFC 7530 NFSv4 March 2015
16.21. Operation 23: PUTPUBFH - Set Public Filehandle
16.21.1. SYNOPSIS
- -> (cfh)
16.21.2. ARGUMENT
void;
16.21.3. RESULT
struct PUTPUBFH4res {
/* CURRENT_FH: public fh */
nfsstat4 status;
};
16.21.4. DESCRIPTION
PUTPUBFH replaces the current filehandle with the filehandle that
represents the public filehandle of the server's namespace. This
filehandle may be different from the root filehandle, which may be
associated with some other directory on the server.
The public filehandle concept was introduced in [RFC 2054], [RFC 2055],
and [RFC 2224]. The intent for NFSv4 is that the public filehandle
(represented by the PUTPUBFH operation) be used as a method of
providing compatibility with the WebNFS server of NFSv2 and NFSv3.
The public filehandle and the root filehandle (represented by the
PUTROOTFH operation) should be equivalent. If the public and root
filehandles are not equivalent, then the public filehandle MUST be a
descendant of the root filehandle.
Haynes & Noveck Standards Track PAGE 263
RFC 7530 NFSv4 March 2015
16.21.5. IMPLEMENTATION
PUTPUBFH is used as the first operator in an NFS request to set the
context for operations that follow it.
With the NFSv2 and NFSv3 public filehandle, the client is able to
specify whether the pathname provided in the LOOKUP should be
evaluated as either an absolute path relative to the server's root or
relative to the public filehandle. [RFC 2224] contains further
discussion of the functionality. With NFSv4, that type of
specification is not directly available in the LOOKUP operation. The
reason for this is because the component separators needed to specify
absolute versus relative are not allowed in NFSv4. Therefore, the
client is responsible for constructing its request such that either
PUTROOTFH or PUTPUBFH is used to signify absolute or relative
evaluation of an NFS URL, respectively.
Note that there are warnings mentioned in [RFC 2224] with respect to
the use of absolute evaluation and the restrictions the server may
place on that evaluation with respect to how much of its namespace
has been made available. These same warnings apply to NFSv4. It is
likely, therefore, that because of server implementation details an
NFSv3 absolute public filehandle lookup may behave differently than
an NFSv4 absolute resolution.
There is a form of security negotiation as described in [RFC 2755]
that uses the public filehandle as a method of employing the Simple
and Protected GSS-API Negotiation Mechanism (SNEGO) [RFC 4178]. This
method is not available with NFSv4, as filehandles are not overloaded
with special meaning and therefore do not provide the same framework
as NFSv2 and NFSv3. Clients should therefore use the security
negotiation mechanisms described in this RFC.
Haynes & Noveck Standards Track PAGE 264
RFC 7530 NFSv4 March 2015
16.22. Operation 24: PUTROOTFH - Set Root Filehandle
16.22.1. SYNOPSIS
- -> (cfh)
16.22.2. ARGUMENT
void;
16.22.3. RESULT
struct PUTROOTFH4res {
/* CURRENT_FH: root fh */
nfsstat4 status;
};
16.22.4. DESCRIPTION
PUTROOTFH replaces the current filehandle with the filehandle that
represents the root of the server's namespace. From this filehandle,
a LOOKUP operation can locate any other filehandle on the server.
This filehandle may be different from the public filehandle, which
may be associated with some other directory on the server.
See Section 15.2.4.1 for more details on the current filehandle.
16.22.5. IMPLEMENTATION
PUTROOTFH is commonly used as the first operator in an NFS request to
set the context for operations that follow it.
Haynes & Noveck Standards Track PAGE 265
RFC 7530 NFSv4 March 2015
16.23. Operation 25: READ - Read from File
16.23.1. SYNOPSIS
(cfh), stateid, offset, count -> eof, data
16.23.2. ARGUMENT
struct READ4args {
/* CURRENT_FH: file */
stateid4 stateid;
offset4 offset;
count4 count;
};
16.23.3. RESULT
struct READ4resok {
bool eof;
opaque data<>;
};
union READ4res switch (nfsstat4 status) {
case NFS4_OK:
READ4resok resok4;
default:
void;
};
16.23.4. DESCRIPTION
The READ operation reads data from the regular file identified by the
current filehandle.
The client provides an offset of where the READ is to start and a
count of how many bytes are to be read. An offset of 0 (zero) means
to read data starting at the beginning of the file. If the offset is
greater than or equal to the size of the file, the status, NFS4_OK,
is returned with a data length set to 0 (zero), and eof is set to
TRUE. The READ is subject to access permissions checking.
If the client specifies a count value of 0 (zero), the READ succeeds
and returns 0 (zero) bytes of data (subject to access permissions
checking). The server may choose to return fewer bytes than
specified by the client. The client needs to check for this
condition and handle the condition appropriately.
Haynes & Noveck Standards Track PAGE 266
RFC 7530 NFSv4 March 2015
The stateid value for a READ request represents a value returned from
a previous byte-range lock or share reservation request, or the
stateid associated with a delegation. The stateid is used by the
server to verify that the associated share reservation and any
byte-range locks are still valid and to update lease timeouts for the
client.
If the READ ended at the end-of-file (formally, in a correctly formed
READ request, if offset + count is equal to the size of the file), or
the READ request extends beyond the size of the file (if offset +
count is greater than the size of the file), eof is returned as TRUE;
otherwise, it is FALSE. A successful READ of an empty file will
always return eof as TRUE.
If the current filehandle is not a regular file, an error will be
returned to the client. In the case where the current filehandle
represents a directory, NFS4ERR_ISDIR is returned; otherwise,
NFS4ERR_INVAL is returned.
For a READ using the special anonymous stateid, the server MAY allow
the READ to be serviced subject to mandatory file locks or the
current share_deny modes for the file. For a READ using the special
READ bypass stateid, the server MAY allow READ operations to bypass
locking checks at the server.
On success, the current filehandle retains its value.
16.23.5. IMPLEMENTATION
If the server returns a "short read" (i.e., less data than requested
and eof is set to FALSE), the client should send another READ to get
the remaining data. A server may return less data than requested
under several circumstances. The file may have been truncated by
another client or perhaps on the server itself, changing the file
size from what the requesting client believes to be the case. This
would reduce the actual amount of data available to the client. It
is possible that the server reduces the transfer size and so returns
a short read result. Server resource exhaustion may also result in a
short read.
If mandatory byte-range locking is in effect for the file, and if the
byte range corresponding to the data to be read from the file is
WRITE_LT locked by an owner not associated with the stateid, the
server will return the NFS4ERR_LOCKED error. The client should try
to get the appropriate READ_LT via the LOCK operation before
re-attempting the READ. When the READ completes, the client should
release the byte-range lock via LOCKU.
Haynes & Noveck Standards Track PAGE 267
RFC 7530 NFSv4 March 2015
If another client has an OPEN_DELEGATE_WRITE delegation for the file
being read, the delegation must be recalled, and the operation cannot
proceed until that delegation is returned or revoked. Except where
this happens very quickly, one or more NFS4ERR_DELAY errors will be
returned to requests made while the delegation remains outstanding.
Normally, delegations will not be recalled as a result of a READ
operation, since the recall will occur as a result of an earlier
OPEN. However, since it is possible for a READ to be done with a
special stateid, the server needs to check for this case even though
the client should have done an OPEN previously.
Haynes & Noveck Standards Track PAGE 268
RFC 7530 NFSv4 March 2015
16.24. Operation 26: READDIR - Read Directory
16.24.1. SYNOPSIS
(cfh), cookie, cookieverf, dircount, maxcount, attr_request ->
cookieverf { cookie, name, attrs }
16.24.2. ARGUMENT
struct READDIR4args {
/* CURRENT_FH: directory */
nfs_cookie4 cookie;
verifier4 cookieverf;
count4 dircount;
count4 maxcount;
bitmap4 attr_request;
};
16.24.3. RESULT
struct entry4 {
nfs_cookie4 cookie;
component4 name;
fattr4 attrs;
entry4 *nextentry;
};
struct dirlist4 {
entry4 *entries;
bool eof;
};
struct READDIR4resok {
verifier4 cookieverf;
dirlist4 reply;
};
union READDIR4res switch (nfsstat4 status) {
case NFS4_OK:
READDIR4resok resok4;
default:
void;
};
Haynes & Noveck Standards Track PAGE 269
RFC 7530 NFSv4 March 2015
16.24.4. DESCRIPTION
The READDIR operation retrieves a variable number of entries from a
file system directory and for each entry returns attributes that were
requested by the client, along with information to allow the client
to request additional directory entries in a subsequent READDIR.
The arguments contain a cookie value that represents where the
READDIR should start within the directory. A value of 0 (zero) for
the cookie is used to start reading at the beginning of the
directory. For subsequent READDIR requests, the client specifies a
cookie value that is provided by the server in a previous READDIR
request.
The cookieverf value should be set to 0 (zero) when the cookie value
is 0 (zero) (first directory read). On subsequent requests, it
should be a cookieverf as returned by the server. The cookieverf
must match that returned by the READDIR in which the cookie was
acquired. If the server determines that the cookieverf is no longer
valid for the directory, the error NFS4ERR_NOT_SAME must be returned.
The dircount portion of the argument is a hint of the maximum number
of bytes of directory information that should be returned. This
value represents the length of the names of the directory entries and
the cookie value for these entries. This length represents the XDR
encoding of the data (names and cookies) and not the length in the
native format of the server.
The maxcount value of the argument is the maximum number of bytes for
the result. This maximum size represents all of the data being
returned within the READDIR4resok structure and includes the XDR
overhead. The server may return less data. If the server is unable
to return a single directory entry within the maxcount limit, the
error NFS4ERR_TOOSMALL will be returned to the client.
Finally, attr_request represents the list of attributes to be
returned for each directory entry supplied by the server.
On successful return, the server's response will provide a list of
directory entries. Each of these entries contains the name of the
directory entry, a cookie value for that entry, and the associated
attributes as requested. The "eof" flag has a value of TRUE if there
are no more entries in the directory.
The cookie value is only meaningful to the server and is used as a
"bookmark" for the directory entry. As mentioned, this cookie is
used by the client for subsequent READDIR operations so that it may
continue reading a directory. The cookie is similar in concept to a
Haynes & Noveck Standards Track PAGE 270
RFC 7530 NFSv4 March 2015
READ offset but should not be interpreted as such by the client. The
server SHOULD try to accept cookie values issued with READDIR
responses even if the directory has been modified between the READDIR
calls but MAY return NFS4ERR_NOT_VALID if this is not possible, as
might be the case if the server has rebooted in the interim.
In some cases, the server may encounter an error while obtaining the
attributes for a directory entry. Instead of returning an error for
the entire READDIR operation, the server can instead return the
attribute 'fattr4_rdattr_error'. With this, the server is able to
communicate the failure to the client and not fail the entire
operation in the instance of what might be a transient failure.
Obviously, the client must request the fattr4_rdattr_error attribute
for this method to work properly. If the client does not request the
attribute, the server has no choice but to return failure for the
entire READDIR operation.
For some file system environments, the directory entries "." and ".."
have special meaning, and in other environments, they may not. If
the server supports these special entries within a directory, they
should not be returned to the client as part of the READDIR response.
To enable some client environments, the cookie values of 0, 1, and 2
are to be considered reserved. Note that the UNIX client will use
these values when combining the server's response and local
representations to enable a fully formed UNIX directory presentation
to the application.
For READDIR arguments, cookie values of 1 and 2 SHOULD NOT be used,
and for READDIR results, cookie values of 0, 1, and 2 MUST NOT be
returned.
On success, the current filehandle retains its value.
16.24.5. IMPLEMENTATION
The server's file system directory representations can differ
greatly. A client's programming interfaces may also be bound to the
local operating environment in a way that does not translate well
into the NFS protocol. Therefore, the dircount and maxcount fields
are provided to allow the client the ability to provide guidelines to
the server. If the client is aggressive about attribute collection
during a READDIR, the server has an idea of how to limit the encoded
response. The dircount field provides a hint on the number of
entries based solely on the names of the directory entries. Since it
is a hint, it may be possible that a dircount value is zero. In this
case, the server is free to ignore the dircount value and return
directory information based on the specified maxcount value.
Haynes & Noveck Standards Track PAGE 271
RFC 7530 NFSv4 March 2015
As there is no way for the client to indicate that a cookie value,
once received, will not be subsequently used, server implementations
should avoid schemes that allocate memory corresponding to a returned
cookie. Such allocation can be avoided if the server bases cookie
values on a value such as the offset within the directory where the
scan is to be resumed.
Cookies generated by such techniques should be designed to remain
valid despite modification of the associated directory. If a server
were to invalidate a cookie because of a directory modification,
READDIRs of large directories might never finish.
If a directory is deleted after the client has carried out one or
more READDIR operations on the directory, the cookies returned will
become invalid; however, the server does not need to be concerned, as
the directory filehandle used previously would have become stale and
would be reported as such on subsequent READDIR operations. The
server would not need to check the cookie verifier in this case.
However, certain reorganization operations on a directory (including
directory compaction) may invalidate READDIR cookies previously given
out. When such a situation occurs, the server should modify the
cookie verifier so as to disallow the use of cookies that would
otherwise no longer be valid.
The cookieverf may be used by the server to help manage cookie values
that may become stale. It should be a rare occurrence that a server
is unable to continue properly reading a directory with the provided
cookie/cookieverf pair. The server should make every effort to avoid
this condition since the application at the client may not be able to
properly handle this type of failure.
The use of the cookieverf will also protect the client from using
READDIR cookie values that may be stale. For example, if the file
system has been migrated, the server may or may not be able to use
the same cookie values to service READDIR as the previous server
used. With the client providing the cookieverf, the server is able
to provide the appropriate response to the client. This prevents the
case where the server may accept a cookie value but the underlying
directory has changed and the response is invalid from the client's
context of its previous READDIR.
Since some servers will not be returning "." and ".." entries as has
been done with previous versions of the NFS protocol, the client that
requires these entries be present in READDIR responses must fabricate
them.
Haynes & Noveck Standards Track PAGE 272
RFC 7530 NFSv4 March 2015
16.25. Operation 27: READLINK - Read Symbolic Link
16.25.1. SYNOPSIS
(cfh) -> linktext
16.25.2. ARGUMENT
/* CURRENT_FH: symlink */
void;
16.25.3. RESULT
struct READLINK4resok {
linktext4 link;
};
union READLINK4res switch (nfsstat4 status) {
case NFS4_OK:
READLINK4resok resok4;
default:
void;
};
16.25.4. DESCRIPTION
READLINK reads the data associated with a symbolic link. The data is
a UTF-8 string that is opaque to the server. That is, whether
created by an NFS client or created locally on the server, the data
in a symbolic link is not interpreted when created but is simply
stored.
On success, the current filehandle retains its value.
16.25.5. IMPLEMENTATION
A symbolic link is nominally a pointer to another file. The data is
not necessarily interpreted by the server; it is just stored in the
file. It is possible for a client implementation to store a pathname
that is not meaningful to the server operating system in a symbolic
link. A READLINK operation returns the data to the client for
interpretation. If different implementations want to share access to
symbolic links, then they must agree on the interpretation of the
data in the symbolic link.
The READLINK operation is only allowed on objects of type NF4LNK.
The server should return the error NFS4ERR_INVAL if the object is not
of type NF4LNK.
Haynes & Noveck Standards Track PAGE 273
RFC 7530 NFSv4 March 2015
16.26. Operation 28: REMOVE - Remove File System Object
16.26.1. SYNOPSIS
(cfh), filename -> change_info
16.26.2. ARGUMENT
struct REMOVE4args {
/* CURRENT_FH: directory */
component4 target;
};
16.26.3. RESULT
struct REMOVE4resok {
change_info4 cinfo;
};
union REMOVE4res switch (nfsstat4 status) {
case NFS4_OK:
REMOVE4resok resok4;
default:
void;
};
16.26.4. DESCRIPTION
The REMOVE operation removes (deletes) a directory entry named by
filename from the directory corresponding to the current filehandle.
If the entry in the directory was the last reference to the
corresponding file system object, the object may be destroyed.
For the directory where the filename was removed, the server returns
change_info4 information in cinfo. With the atomic field of the
change_info4 struct, the server will indicate if the before and after
change attributes were obtained atomically with respect to the
removal.
If the target is of zero length, NFS4ERR_INVAL will be returned. The
target is also subject to the normal UTF-8, character support, and
name checks. See Section 12.7 for further discussion.
On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 274
RFC 7530 NFSv4 March 2015
16.26.5. IMPLEMENTATION
NFSv3 required a different operator -- RMDIR -- for directory
removal, and REMOVE for non-directory removal. This allowed clients
to skip checking the file type when being passed a non-directory
delete system call (e.g., unlink() [unlink] in POSIX) to remove a
directory, as well as the converse (e.g., a rmdir() on a
non-directory), because they knew the server would check the file
type. NFSv4 REMOVE can be used to delete any directory entry,
independent of its file type. The implementer of an NFSv4 client's
entry points from the unlink() and rmdir() system calls should first
check the file type against the types the system call is allowed to
remove before issuing a REMOVE. Alternatively, the implementer can
produce a COMPOUND call that includes a LOOKUP/VERIFY sequence to
verify the file type before a REMOVE operation in the same COMPOUND
call.
The concept of last reference is server specific. However, if the
numlinks field in the previous attributes of the object had the value
1, the client should not rely on referring to the object via a
filehandle. Likewise, the client should not rely on the resources
(disk space, directory entry, and so on) formerly associated with the
object becoming immediately available. Thus, if a client needs to be
able to continue to access a file after using REMOVE to remove it,
the client should take steps to make sure that the file will still be
accessible. The usual mechanism used is to RENAME the file from its
old name to a new hidden name.
If the server finds that the file is still open when the REMOVE
arrives:
o The server SHOULD NOT delete the file's directory entry if the
file was opened with OPEN4_SHARE_DENY_WRITE or
OPEN4_SHARE_DENY_BOTH.
o If the file was not opened with OPEN4_SHARE_DENY_WRITE or
OPEN4_SHARE_DENY_BOTH, the server SHOULD delete the file's
directory entry. However, until the last CLOSE of the file, the
server MAY continue to allow access to the file via its
filehandle.
Haynes & Noveck Standards Track PAGE 275
RFC 7530 NFSv4 March 2015
16.27. Operation 29: RENAME - Rename Directory Entry
16.27.1. SYNOPSIS
(sfh), oldname, (cfh), newname -> source_cinfo, target_cinfo
16.27.2. ARGUMENT
struct RENAME4args {
/* SAVED_FH: source directory */
component4 oldname;
/* CURRENT_FH: target directory */
component4 newname;
};
16.27.3. RESULT
struct RENAME4resok {
change_info4 source_cinfo;
change_info4 target_cinfo;
};
union RENAME4res switch (nfsstat4 status) {
case NFS4_OK:
RENAME4resok resok4;
default:
void;
};
16.27.4. DESCRIPTION
The RENAME operation renames the object identified by oldname in the
source directory corresponding to the saved filehandle, as set by the
SAVEFH operation, to newname in the target directory corresponding to
the current filehandle. The operation is required to be atomic to
the client. Source and target directories must reside on the same
file system on the server. On success, the current filehandle will
continue to be the target directory.
If the target directory already contains an entry with the name
newname, the source object must be compatible with the target: either
both are non-directories, or both are directories, and the target
must be empty. If compatible, the existing target is removed before
the rename occurs (see Section 16.26 for client and server actions
whenever a target is removed). If they are not compatible or if the
target is a directory but not empty, the server will return the error
NFS4ERR_EXIST.
Haynes & Noveck Standards Track PAGE 276
RFC 7530 NFSv4 March 2015
If oldname and newname both refer to the same file (they might be
hard links of each other), then RENAME should perform no action and
return success.
For both directories involved in the RENAME, the server returns
change_info4 information. With the atomic field of the change_info4
struct, the server will indicate if the before and after change
attributes were obtained atomically with respect to the rename.
If the oldname refers to a named attribute and the saved and current
filehandles refer to the named attribute directories of different
file system objects, the server will return NFS4ERR_XDEV, just as if
the saved and current filehandles represented directories on
different file systems.
If the oldname or newname is of zero length, NFS4ERR_INVAL will be
returned. The oldname and newname are also subject to the normal
UTF-8, character support, and name checks. See Section 12.7 for
further discussion.
16.27.5. IMPLEMENTATION
The RENAME operation must be atomic to the client. The statement
"source and target directories must reside on the same file system on
the server" means that the fsid fields in the attributes for the
directories are the same. If they reside on different file systems,
the error NFS4ERR_XDEV is returned.
Based on the value of the fh_expire_type attribute for the object,
the filehandle may or may not expire on a RENAME. However, server
implementers are strongly encouraged to attempt to keep filehandles
from expiring in this fashion.
On some servers, the filenames "." and ".." are illegal as either
oldname or newname and will result in the error NFS4ERR_BADNAME. In
addition, on many servers the case of oldname or newname being an
alias for the source directory will be checked for. Such servers
will return the error NFS4ERR_INVAL in these cases.
If either of the source or target filehandles are not directories,
the server will return NFS4ERR_NOTDIR.
Haynes & Noveck Standards Track PAGE 277
RFC 7530 NFSv4 March 2015
16.28. Operation 30: RENEW - Renew a Lease
16.28.1. SYNOPSIS
clientid -> ()
16.28.2. ARGUMENT
struct RENEW4args {
clientid4 clientid;
};
16.28.3. RESULT
struct RENEW4res {
nfsstat4 status;
};
16.28.4. DESCRIPTION
The RENEW operation is used by the client to renew leases that it
currently holds at a server. In processing the RENEW request, the
server renews all leases associated with the client. The associated
leases are determined by the clientid provided via the SETCLIENTID
operation.
16.28.5. IMPLEMENTATION
When the client holds delegations, it needs to use RENEW to detect
when the server has determined that the callback path is down. When
the server has made such a determination, only the RENEW operation
will renew the lease on delegations. If the server determines the
callback path is down, it returns NFS4ERR_CB_PATH_DOWN. Even though
it returns NFS4ERR_CB_PATH_DOWN, the server MUST renew the lease on
the byte-range locks and share reservations that the client has
established on the server. If for some reason the lock and share
reservation lease cannot be renewed, then the server MUST return an
error other than NFS4ERR_CB_PATH_DOWN, even if the callback path is
also down. In the event that the server has conditions such that it
could return either NFS4ERR_CB_PATH_DOWN or NFS4ERR_LEASE_MOVED,
NFS4ERR_LEASE_MOVED MUST be handled first.
Haynes & Noveck Standards Track PAGE 278
RFC 7530 NFSv4 March 2015
The client that issues RENEW MUST choose the principal, RPC security
flavor, and, if applicable, GSS-API mechanism and service via one of
the following algorithms:
o The client uses the same principal, RPC security flavor, and -- if
the flavor was RPCSEC_GSS -- the same mechanism and service that
were used when the client ID was established via
SETCLIENTID_CONFIRM.
o The client uses any principal, RPC security flavor, mechanism, and
service combination that currently has an OPEN file on the server.
That is, the same principal had a successful OPEN operation; the
file is still open by that principal; and the flavor, mechanism,
and service of RENEW match that of the previous OPEN.
The server MUST reject a RENEW that does not use one of the
aforementioned algorithms, with the error NFS4ERR_ACCESS.
Haynes & Noveck Standards Track PAGE 279
RFC 7530 NFSv4 March 2015
16.29. Operation 31: RESTOREFH - Restore Saved Filehandle
16.29.1. SYNOPSIS
(sfh) -> (cfh)
16.29.2. ARGUMENT
/* SAVED_FH: */
void;
16.29.3. RESULT
struct RESTOREFH4res {
/* CURRENT_FH: value of saved fh */
nfsstat4 status;
};
16.29.4. DESCRIPTION
Set the current filehandle to the value in the saved filehandle. If
there is no saved filehandle, then return the error
NFS4ERR_RESTOREFH.
16.29.5. IMPLEMENTATION
Operations like OPEN and LOOKUP use the current filehandle to
represent a directory and replace it with a new filehandle. Assuming
that the previous filehandle was saved with a SAVEFH operator, the
previous filehandle can be restored as the current filehandle. This
is commonly used to obtain post-operation attributes for the
directory, e.g.,
PUTFH (directory filehandle)
SAVEFH
GETATTR attrbits (pre-op dir attrs)
CREATE optbits "foo" attrs
GETATTR attrbits (file attributes)
RESTOREFH
GETATTR attrbits (post-op dir attrs)
Haynes & Noveck Standards Track PAGE 280
RFC 7530 NFSv4 March 2015
16.30. Operation 32: SAVEFH - Save Current Filehandle
16.30.1. SYNOPSIS
(cfh) -> (sfh)
16.30.2. ARGUMENT
/* CURRENT_FH: */
void;
16.30.3. RESULT
struct SAVEFH4res {
/* SAVED_FH: value of current fh */
nfsstat4 status;
};
16.30.4. DESCRIPTION
Save the current filehandle. If a previous filehandle was saved,
then it is no longer accessible. The saved filehandle can be
restored as the current filehandle with the RESTOREFH operator.
On success, the current filehandle retains its value.
16.30.5. IMPLEMENTATION
Haynes & Noveck Standards Track PAGE 281
RFC 7530 NFSv4 March 2015
16.31. Operation 33: SECINFO - Obtain Available Security
16.31.1. SYNOPSIS
(cfh), name -> { secinfo }
16.31.2. ARGUMENT
struct SECINFO4args {
/* CURRENT_FH: directory */
component4 name;
};
16.31.3. RESULT
/*
* From RFC 2203
*/
enum rpc_gss_svc_t {
RPC_GSS_SVC_NONE = 1,
RPC_GSS_SVC_INTEGRITY = 2,
RPC_GSS_SVC_PRIVACY = 3
};
struct rpcsec_gss_info {
sec_oid4 oid;
qop4 qop;
rpc_gss_svc_t service;
};
/* RPCSEC_GSS has a value of '6'. See RFC 2203 */
union secinfo4 switch (uint32_t flavor) {
case RPCSEC_GSS:
rpcsec_gss_info flavor_info;
default:
void;
};
typedef secinfo4 SECINFO4resok<>;
union SECINFO4res switch (nfsstat4 status) {
case NFS4_OK:
SECINFO4resok resok4;
default:
void;
};
Haynes & Noveck Standards Track PAGE 282
RFC 7530 NFSv4 March 2015
16.31.4. DESCRIPTION
The SECINFO operation is used by the client to obtain a list of valid
RPC authentication flavors for a specific directory filehandle,
filename pair. SECINFO should apply the same access methodology used
for LOOKUP when evaluating the name. Therefore, if the requester
does not have the appropriate access to perform a LOOKUP for the
name, then SECINFO must behave the same way and return
NFS4ERR_ACCESS.
The result will contain an array that represents the security
mechanisms available, with an order corresponding to the server's
preferences, the most preferred being first in the array. The client
is free to pick whatever security mechanism it both desires and
supports, or to pick -- in the server's preference order -- the first
one it supports. The array entries are represented by the secinfo4
structure. The field 'flavor' will contain a value of AUTH_NONE,
AUTH_SYS (as defined in [RFC 5531]), or RPCSEC_GSS (as defined in
[RFC 2203]).
For the flavors AUTH_NONE and AUTH_SYS, no additional security
information is returned. For a return value of RPCSEC_GSS, a
security triple is returned that contains the mechanism object id (as
defined in [RFC 2743]), the quality of protection (as defined in
[RFC 2743]), and the service type (as defined in [RFC 2203]). It is
possible for SECINFO to return multiple entries with flavor equal to
RPCSEC_GSS, with different security triple values.
On success, the current filehandle retains its value.
If the name has a length of 0 (zero), or if the name does not obey
the UTF-8 definition, the error NFS4ERR_INVAL will be returned.
16.31.5. IMPLEMENTATION
The SECINFO operation is expected to be used by the NFS client when
the error value of NFS4ERR_WRONGSEC is returned from another NFS
operation. This signifies to the client that the server's security
policy is different from what the client is currently using. At this
point, the client is expected to obtain a list of possible security
flavors and choose what best suits its policies.
As mentioned, the server's security policies will determine when a
client request receives NFS4ERR_WRONGSEC. The operations that may
receive this error are LINK, LOOKUP, LOOKUPP, OPEN, PUTFH, PUTPUBFH,
PUTROOTFH, RENAME, RESTOREFH, and, indirectly, READDIR. LINK and
RENAME will only receive this error if the security used for the
operation is inappropriate for the saved filehandle. With the
Haynes & Noveck Standards Track PAGE 283
RFC 7530 NFSv4 March 2015
exception of READDIR, these operations represent the point at which
the client can instantiate a filehandle into the current filehandle
at the server. The filehandle is either provided by the client
(PUTFH, PUTPUBFH, PUTROOTFH) or generated as a result of a name-to-
filehandle translation (LOOKUP and OPEN). RESTOREFH is different
because the filehandle is a result of a previous SAVEFH. Even though
the filehandle, for RESTOREFH, might have previously passed the
server's inspection for a security match, the server will check it
again on RESTOREFH to ensure that the security policy has not
changed.
If the client wants to resolve an error return of NFS4ERR_WRONGSEC,
the following will occur:
o For LOOKUP and OPEN, the client will use SECINFO with the same
current filehandle and name as provided in the original LOOKUP or
OPEN to enumerate the available security triples.
o For LINK, PUTFH, RENAME, and RESTOREFH, the client will use
SECINFO and provide the parent directory filehandle and the object
name that corresponds to the filehandle originally provided by the
PUTFH or RESTOREFH, or, for LINK and RENAME, the SAVEFH.
o For LOOKUPP, PUTROOTFH, and PUTPUBFH, the client will be unable to
use the SECINFO operation since SECINFO requires a current
filehandle and none exist for these three operations. Therefore,
the client must iterate through the security triples available at
the client and re-attempt the PUTROOTFH or PUTPUBFH operation. In
the unfortunate event that none of the MANDATORY security triples
are supported by the client and server, the client SHOULD try
using others that support integrity. Failing that, the client can
try using AUTH_NONE, but because such forms lack integrity checks,
this puts the client at risk. Nonetheless, the server SHOULD
allow the client to use whatever security form the client requests
and the server supports, since the risks of doing so are on the
client.
The READDIR operation will not directly return the NFS4ERR_WRONGSEC
error. However, if the READDIR request included a request for
attributes, it is possible that the READDIR request's security triple
does not match that of a directory entry. If this is the case and
the client has requested the rdattr_error attribute, the server will
return the NFS4ERR_WRONGSEC error in rdattr_error for the entry.
Haynes & Noveck Standards Track PAGE 284
RFC 7530 NFSv4 March 2015
Note that a server MAY use the AUTH_NONE flavor to signify that the
client is allowed to attempt to use authentication flavors that are
not explicitly listed in the SECINFO results. Instead of using a
listed flavor, the client might then, for instance, opt to use an
otherwise unlisted RPCSEC_GSS mechanism instead of AUTH_NONE. It may
wish to do so in order to meet an application requirement for data
integrity or privacy. In choosing to use an unlisted flavor, the
client SHOULD always be prepared to handle a failure by falling back
to using AUTH_NONE or another listed flavor. It cannot assume that
identity mapping is supported and should be prepared for the fact
that its identity is squashed.
See Section 19 for a discussion on the recommendations for security
flavors used by SECINFO.
Haynes & Noveck Standards Track PAGE 285
RFC 7530 NFSv4 March 2015
16.32. Operation 34: SETATTR - Set Attributes
16.32.1. SYNOPSIS
(cfh), stateid, attrmask, attr_vals -> attrsset
16.32.2. ARGUMENT
struct SETATTR4args {
/* CURRENT_FH: target object */
stateid4 stateid;
fattr4 obj_attributes;
};
16.32.3. RESULT
struct SETATTR4res {
nfsstat4 status;
bitmap4 attrsset;
};
16.32.4. DESCRIPTION
The SETATTR operation changes one or more of the attributes of a file
system object. The new attributes are specified with a bitmap and
the attributes that follow the bitmap in bit order.
The stateid argument for SETATTR is used to provide byte-range
locking context that is necessary for SETATTR requests that set the
size attribute. Since setting the size attribute modifies the file's
data, it has the same locking requirements as a corresponding WRITE.
Any SETATTR that sets the size attribute is incompatible with a share
reservation that specifies OPEN4_SHARE_DENY_WRITE. The area between
the old end-of-file and the new end-of-file is considered to be
modified just as would have been the case had the area in question
been specified as the target of WRITE, for the purpose of checking
conflicts with byte-range locks, for those cases in which a server is
implementing mandatory byte-range locking behavior. A valid stateid
SHOULD always be specified. When the file size attribute is not set,
the special anonymous stateid MAY be passed.
On either success or failure of the operation, the server will return
the attrsset bitmask to represent what (if any) attributes were
successfully set. The attrsset in the response is a subset of the
bitmap4 that is part of the obj_attributes in the argument.
On success, the current filehandle retains its value.
Haynes & Noveck Standards Track PAGE 286
RFC 7530 NFSv4 March 2015
16.32.5. IMPLEMENTATION
If the request specifies the owner attribute to be set, the server
SHOULD allow the operation to succeed if the current owner of the
object matches the value specified in the request. Some servers may
be implemented in such a way as to prohibit the setting of the owner
attribute unless the requester has the privilege to do so. If the
server is lenient in this one case of matching owner values, the
client implementation may be simplified in cases of creation of an
object (e.g., an exclusive create via OPEN) followed by a SETATTR.
The file size attribute is used to request changes to the size of a
file. A value of zero causes the file to be truncated, a value less
than the current size of the file causes data from the new size to
the end of the file to be discarded, and a size greater than the
current size of the file causes logically zeroed data bytes to be
added to the end of the file. Servers are free to implement this
using holes or actual zero data bytes. Clients should not make any
assumptions regarding a server's implementation of this feature,
beyond that the bytes returned will be zeroed. Servers MUST support
extending the file size via SETATTR.
SETATTR is not guaranteed atomic. A failed SETATTR may partially
change a file's attributes -- hence, the reason why the reply always
includes the status and the list of attributes that were set.
If the object whose attributes are being changed has a file
delegation that is held by a client other than the one doing the
SETATTR, the delegation(s) must be recalled, and the operation cannot
proceed to actually change an attribute until each such delegation is
returned or revoked. In all cases in which delegations are recalled,
the server is likely to return one or more NFS4ERR_DELAY errors while
the delegation(s) remains outstanding, although it might not do that
if the delegations are returned quickly.
Changing the size of a file with SETATTR indirectly changes the
time_modify and change attributes. A client must account for this,
as size changes can result in data deletion.
The attributes time_access_set and time_modify_set are write-only
attributes constructed as a switched union so the client can direct
the server in setting the time values. If the switched union
specifies SET_TO_CLIENT_TIME4, the client has provided an nfstime4 to
be used for the operation. If the switch union does not specify
SET_TO_CLIENT_TIME4, the server is to use its current time for the
SETATTR operation.
Haynes & Noveck Standards Track PAGE 287
RFC 7530 NFSv4 March 2015
If server and client times differ, programs that compare client times
to file times can break. A time maintenance protocol should be used
to limit client/server time skew.
Use of a COMPOUND containing a VERIFY operation specifying only the
change attribute, immediately followed by a SETATTR, provides a means
whereby a client may specify a request that emulates the
functionality of the SETATTR guard mechanism of NFSv3. Since the
function of the guard mechanism is to avoid changes to the file
attributes based on stale information, delays between checking of the
guard condition and the setting of the attributes have the potential
to compromise this function, as would the corresponding delay in the
NFSv4 emulation. Therefore, NFSv4 servers should take care to avoid
such delays, to the degree possible, when executing such a request.
If the server does not support an attribute as requested by the
client, the server should return NFS4ERR_ATTRNOTSUPP.
A mask of the attributes actually set is returned by SETATTR in all
cases. That mask MUST NOT include attribute bits not requested to be
set by the client. If the attribute masks in the request and reply
are equal, the status field in the reply MUST be NFS4_OK.
Haynes & Noveck Standards Track PAGE 288
RFC 7530 NFSv4 March 2015
16.33. Operation 35: SETCLIENTID - Negotiate Client ID
16.33.1. SYNOPSIS
client, callback, callback_ident -> clientid, setclientid_confirm
16.33.2. ARGUMENT
struct SETCLIENTID4args {
nfs_client_id4 client;
cb_client4 callback;
uint32_t callback_ident;
};
16.33.3. RESULT
struct SETCLIENTID4resok {
clientid4 clientid;
verifier4 setclientid_confirm;
};
union SETCLIENTID4res switch (nfsstat4 status) {
case NFS4_OK:
SETCLIENTID4resok resok4;
case NFS4ERR_CLID_INUSE:
clientaddr4 client_using;
default:
void;
};
16.33.4. DESCRIPTION
The client uses the SETCLIENTID operation to notify the server of its
intention to use a particular client identifier, callback, and
callback_ident for subsequent requests that entail creating lock,
share reservation, and delegation state on the server. Upon
successful completion the server will return a shorthand client ID
that, if confirmed via a separate step, will be used in subsequent
file locking and file open requests. Confirmation of the client ID
must be done via the SETCLIENTID_CONFIRM operation to return the
client ID and setclientid_confirm values, as verifiers, to the
server. Two verifiers are necessary because it is possible to use
SETCLIENTID and SETCLIENTID_CONFIRM to modify the callback and
callback_ident information but not the shorthand client ID. In that
event, the setclientid_confirm value is effectively the only
verifier.
Haynes & Noveck Standards Track PAGE 289
RFC 7530 NFSv4 March 2015
The callback information provided in this operation will be used if
the client is provided an open delegation at a future point.
Therefore, the client must correctly reflect the program and port
numbers for the callback program at the time SETCLIENTID is used.
The callback_ident value is used by the server on the callback. The
client can leverage the callback_ident to eliminate the need for more
than one callback RPC program number, while still being able to
determine which server is initiating the callback.
16.33.5. IMPLEMENTATION
To understand how to implement SETCLIENTID, make the following
notations. Let:
x be the value of the client.id subfield of the SETCLIENTID4args
structure.
v be the value of the client.verifier subfield of the
SETCLIENTID4args structure.
c be the value of the client ID field returned in the
SETCLIENTID4resok structure.
k represent the value combination of the callback and callback_ident
fields of the SETCLIENTID4args structure.
s be the setclientid_confirm value returned in the SETCLIENTID4resok
structure.
{ v, x, c, k, s } be a quintuple for a client record. A client
record is confirmed if there has been a SETCLIENTID_CONFIRM
operation to confirm it. Otherwise, it is unconfirmed. An
unconfirmed record is established by a SETCLIENTID call.
Since SETCLIENTID is a non-idempotent operation, let us assume that
the server is implementing the duplicate request cache (DRC).
Haynes & Noveck Standards Track PAGE 290
RFC 7530 NFSv4 March 2015
When the server gets a SETCLIENTID { v, x, k } request, it processes
it in the following manner.
o It first looks up the request in the DRC. If there is a hit, it
returns the result cached in the DRC. The server does NOT remove
client state (locks, shares, delegations), nor does it modify any
recorded callback and callback_ident information for client { x }.
For any DRC miss, the server takes the client ID string x, and
searches for client records for x that the server may have
recorded from previous SETCLIENTID calls. For any confirmed
record with the same id string x, if the recorded principal does
not match that of the SETCLIENTID call, then the server returns an
NFS4ERR_CLID_INUSE error.
For brevity of discussion, the remaining description of the
processing assumes that there was a DRC miss, and that where the
server has previously recorded a confirmed record for client x,
the aforementioned principal check has successfully passed.
o The server checks if it has recorded a confirmed record for { v,
x, c, l, s }, where l may or may not equal k. If so, and since
the id verifier v of the request matches that which is confirmed
and recorded, the server treats this as a probable callback
information update and records an unconfirmed { v, x, c, k, t }
and leaves the confirmed { v, x, c, l, s } in place, such that
t != s. It does not matter whether k equals l or not. Any
pre-existing unconfirmed { v, x, c, *, * } is removed.
The server returns { c, t }. It is indeed returning the old
clientid4 value c, because the client apparently only wants to
update callback value k to value l. It's possible this request is
one from the Byzantine router that has stale callback information,
but this is not a problem. The callback information update is
only confirmed if followed up by a SETCLIENTID_CONFIRM { c, t }.
The server awaits confirmation of k via SETCLIENTID_CONFIRM
{ c, t }.
The server does NOT remove client (lock/share/delegation) state
for x.
Haynes & Noveck Standards Track PAGE 291
RFC 7530 NFSv4 March 2015
o The server has previously recorded a confirmed { u, x, c, l, s }
record such that v != u, l may or may not equal k, and has not
recorded any unconfirmed { *, x, *, *, * } record for x. The
server records an unconfirmed { v, x, d, k, t } (d != c, t != s).
The server returns { d, t }.
The server awaits confirmation of { d, k } via SETCLIENTID_CONFIRM
{ d, t }.
The server does NOT remove client (lock/share/delegation) state
for x.
o The server has previously recorded a confirmed { u, x, c, l, s }
record such that v != u, l may or may not equal k, and recorded an
unconfirmed { w, x, d, m, t } record such that c != d, t != s, m
may or may not equal k, m may or may not equal l, and k may or may
not equal l. Whether w == v or w != v makes no difference. The
server simply removes the unconfirmed { w, x, d, m, t } record and
replaces it with an unconfirmed { v, x, e, k, r } record, such
that e != d, e != c, r != t, r != s.
The server returns { e, r }.
The server awaits confirmation of { e, k } via SETCLIENTID_CONFIRM
{ e, r }.
The server does NOT remove client (lock/share/delegation) state
for x.
o The server has no confirmed { *, x, *, *, * } for x. It may or
may not have recorded an unconfirmed { u, x, c, l, s }, where l
may or may not equal k, and u may or may not equal v. Any
unconfirmed record { u, x, c, l, * }, regardless of whether u == v
or l == k, is replaced with an unconfirmed record { v, x, d, k, t
} where d != c, t != s.
The server returns { d, t }.
The server awaits confirmation of { d, k } via SETCLIENTID_CONFIRM
{ d, t }. The server does NOT remove client (lock/share/
delegation) state for x.
The server generates the clientid and setclientid_confirm values and
must take care to ensure that these values are extremely unlikely to
ever be regenerated.
Haynes & Noveck Standards Track PAGE 292
RFC 7530 NFSv4 March 2015
16.34. Operation 36: SETCLIENTID_CONFIRM - Confirm Client ID
16.34.1. SYNOPSIS
clientid, setclientid_confirm -> -
16.34.2. ARGUMENT
struct SETCLIENTID_CONFIRM4args {
clientid4 clientid;
verifier4 setclientid_confirm;
};
16.34.3. RESULT
struct SETCLIENTID_CONFIRM4res {
nfsstat4 status;
};
16.34.4. DESCRIPTION
This operation is used by the client to confirm the results from a
previous call to SETCLIENTID. The client provides the server-
supplied (from a SETCLIENTID response) client ID. The server
responds with a simple status of success or failure.
16.34.5. IMPLEMENTATION
The client must use the SETCLIENTID_CONFIRM operation to confirm the
following two distinct cases:
o The client's use of a new shorthand client identifier (as returned
from the server in the response to SETCLIENTID), a new callback
value (as specified in the arguments to SETCLIENTID), and a new
callback_ident value (as specified in the arguments to
SETCLIENTID). The client's use of SETCLIENTID_CONFIRM in this
case also confirms the removal of any of the client's previous
relevant leased state. Relevant leased client state includes
byte-range locks, share reservations, and -- where the server does
not support the CLAIM_DELEGATE_PREV claim type -- delegations. If
the server supports CLAIM_DELEGATE_PREV, then SETCLIENTID_CONFIRM
MUST NOT remove delegations for this client; relevant leased
client state would then just include byte-range locks and share
reservations.
Haynes & Noveck Standards Track PAGE 293
RFC 7530 NFSv4 March 2015
o The client's reuse of an old, previously confirmed shorthand
client identifier; a new callback value; and a new callback_ident
value. The client's use of SETCLIENTID_CONFIRM in this case MUST
NOT result in the removal of any previous leased state (locks,
share reservations, and delegations).
We use the same notation and definitions for v, x, c, k, s, and
unconfirmed and confirmed client records as introduced in the
description of the SETCLIENTID operation. The arguments to
SETCLIENTID_CONFIRM are indicated by the notation { c, s }, where c
is a value of type clientid4, and s is a value of type verifier4
corresponding to the setclientid_confirm field.
As with SETCLIENTID, SETCLIENTID_CONFIRM is a non-idempotent
operation, and we assume that the server is implementing the
duplicate request cache (DRC).
When the server gets a SETCLIENTID_CONFIRM { c, s } request, it
processes it in the following manner.
o It first looks up the request in the DRC. If there is a hit, it
returns the result cached in the DRC. The server does not remove
any relevant leased client state, nor does it modify any recorded
callback and callback_ident information for client { x } as
represented by the shorthand value c.
For a DRC miss, the server checks for client records that match the
shorthand value c. The processing cases are as follows:
o The server has recorded an unconfirmed { v, x, c, k, s } record
and a confirmed { v, x, c, l, t } record, such that s != t. If
the principals of the records do not match that of the
SETCLIENTID_CONFIRM, the server returns NFS4ERR_CLID_INUSE, and no
relevant leased client state is removed and no recorded callback
and callback_ident information for client { x } is changed.
Otherwise, the confirmed { v, x, c, l, t } record is removed and
the unconfirmed { v, x, c, k, s } is marked as confirmed, thereby
modifying recorded and confirmed callback and callback_ident
information for client { x }.
The server does not remove any relevant leased client state.
The server returns NFS4_OK.
Haynes & Noveck Standards Track PAGE 294
RFC 7530 NFSv4 March 2015
o The server has not recorded an unconfirmed { v, x, c, *, * } and
has recorded a confirmed { v, x, c, *, s }. If the principals of
the record and of SETCLIENTID_CONFIRM do not match, the server
returns NFS4ERR_CLID_INUSE without removing any relevant leased
client state, and without changing recorded callback and
callback_ident values for client { x }.
If the principals match, then what has likely happened is that the
client never got the response from the SETCLIENTID_CONFIRM, and
the DRC entry has been purged. Whatever the scenario, since the
principals match, as well as { c, s } matching a confirmed record,
the server leaves client x's relevant leased client state intact,
leaves its callback and callback_ident values unmodified, and
returns NFS4_OK.
o The server has not recorded a confirmed { *, *, c, *, * } and has
recorded an unconfirmed { *, x, c, k, s }. Even if this is a
retry from the client, nonetheless the client's first
SETCLIENTID_CONFIRM attempt was not received by the server. Retry
or not, the server doesn't know, but it processes it as if it were
a first try. If the principal of the unconfirmed { *, x, c, k, s
} record mismatches that of the SETCLIENTID_CONFIRM request, the
server returns NFS4ERR_CLID_INUSE without removing any relevant
leased client state.
Otherwise, the server records a confirmed { *, x, c, k, s }. If
there is also a confirmed { *, x, d, *, t }, the server MUST
remove client x's relevant leased client state and overwrite the
callback state with k. The confirmed record { *, x, d, *, t } is
removed.
The server returns NFS4_OK.
o The server has no record of a confirmed or unconfirmed { *, *, c,
*, s }. The server returns NFS4ERR_STALE_CLIENTID. The server
does not remove any relevant leased client state, nor does it
modify any recorded callback and callback_ident information for
any client.
The server needs to cache unconfirmed { v, x, c, k, s } client
records and await for some time their confirmation. As should be
clear from the discussions of record processing for SETCLIENTID and
SETCLIENTID_CONFIRM, there are cases where the server does not
deterministically remove unconfirmed client records. To avoid
running out of resources, the server is not required to hold
unconfirmed records indefinitely. One strategy the server might use
is to set a limit on how many unconfirmed client records it will
maintain and then, when the limit would be exceeded, remove the
Haynes & Noveck Standards Track PAGE 295
RFC 7530 NFSv4 March 2015
oldest record. Another strategy might be to remove an unconfirmed
record when some amount of time has elapsed. The choice of the
amount of time is fairly arbitrary, but it is surely no higher than
the server's lease time period. Consider that leases need to be
renewed before the lease time expires via an operation from the
client. If the client cannot issue a SETCLIENTID_CONFIRM after a
SETCLIENTID before a period of time equal to a lease expiration time,
then the client is unlikely to be able to maintain state on the
server during steady-state operation.
If the client does send a SETCLIENTID_CONFIRM for an unconfirmed
record that the server has already deleted, the client will get
NFS4ERR_STALE_CLIENTID back. If so, the client should then start
over, and send SETCLIENTID to re-establish an unconfirmed client
record and get back an unconfirmed client ID and setclientid_confirm
verifier. The client should then send the SETCLIENTID_CONFIRM to
confirm the client ID.
SETCLIENTID_CONFIRM does not establish or renew a lease. However, if
SETCLIENTID_CONFIRM removes relevant leased client state, and that
state does not include existing delegations, the server MUST allow
the client a period of time no less than the value of the lease_time
attribute, to reclaim (via the CLAIM_DELEGATE_PREV claim type of the
OPEN operation) its delegations before removing unreclaimed
delegations.
Haynes & Noveck Standards Track PAGE 296
RFC 7530 NFSv4 March 2015
16.35. Operation 37: VERIFY - Verify Same Attributes
16.35.1. SYNOPSIS
(cfh), fattr -> -
16.35.2. ARGUMENT
struct VERIFY4args {
/* CURRENT_FH: object */
fattr4 obj_attributes;
};
16.35.3. RESULT
struct VERIFY4res {
nfsstat4 status;
};
16.35.4. DESCRIPTION
The VERIFY operation is used to verify that attributes have a value
assumed by the client before proceeding with subsequent operations in
the COMPOUND request. If any of the attributes do not match, then
the error NFS4ERR_NOT_SAME must be returned. The current filehandle
retains its value after successful completion of the operation.
16.35.5. IMPLEMENTATION
One possible use of the VERIFY operation is the following COMPOUND
sequence. With this, the client is attempting to verify that the
file being removed will match what the client expects to be removed.
This sequence can help prevent the unintended deletion of a file.
PUTFH (directory filehandle)
LOOKUP (filename)
VERIFY (filehandle == fh)
PUTFH (directory filehandle)
REMOVE (filename)
This sequence does not prevent a second client from removing and
creating a new file in the middle of this sequence, but it does help
avoid the unintended result.
Haynes & Noveck Standards Track PAGE 297
RFC 7530 NFSv4 March 2015
In the case that a RECOMMENDED attribute is specified in the VERIFY
operation and the server does not support that attribute for the file
system object, the error NFS4ERR_ATTRNOTSUPP is returned to the
client.
When the attribute rdattr_error or any write-only attribute (e.g.,
time_modify_set) is specified, the error NFS4ERR_INVAL is returned to
the client.
Haynes & Noveck Standards Track PAGE 298
RFC 7530 NFSv4 March 2015
16.36. Operation 38: WRITE - Write to File
16.36.1. SYNOPSIS
(cfh), stateid, offset, stable, data -> count, committed, writeverf
16.36.2. ARGUMENT
enum stable_how4 {
UNSTABLE4 = 0,
DATA_SYNC4 = 1,
FILE_SYNC4 = 2
};
struct WRITE4args {
/* CURRENT_FH: file */
stateid4 stateid;
offset4 offset;
stable_how4 stable;
opaque data<>;
};
16.36.3. RESULT
struct WRITE4resok {
count4 count;
stable_how4 committed;
verifier4 writeverf;
};
union WRITE4res switch (nfsstat4 status) {
case NFS4_OK:
WRITE4resok resok4;
default:
void;
};
16.36.4. DESCRIPTION
The WRITE operation is used to write data to a regular file. The
target file is specified by the current filehandle. The offset
specifies the offset where the data should be written. An offset of
0 (zero) specifies that the write should start at the beginning of
the file. The count, as encoded as part of the opaque data
parameter, represents the number of bytes of data that are to be
written. If the count is 0 (zero), the WRITE will succeed and return
a count of 0 (zero) subject to permissions checking. The server may
choose to write fewer bytes than requested by the client.
Haynes & Noveck Standards Track PAGE 299
RFC 7530 NFSv4 March 2015
Part of the WRITE request is a specification of how the WRITE is to
be performed. The client specifies with the stable parameter the
method of how the data is to be processed by the server. If stable
is FILE_SYNC4, the server must commit the data written plus all file
system metadata to stable storage before returning results. This
corresponds to the NFSv2 protocol semantics. Any other behavior
constitutes a protocol violation. If stable is DATA_SYNC4, then the
server must commit all of the data to stable storage and enough of
the metadata to retrieve the data before returning. The server
implementer is free to implement DATA_SYNC4 in the same fashion as
FILE_SYNC4, but with a possible performance drop. If stable is
UNSTABLE4, the server is free to commit any part of the data and the
metadata to stable storage, including all or none, before returning a
reply to the client. There is no guarantee whether or when any
uncommitted data will subsequently be committed to stable storage.
The only guarantees made by the server are that it will not destroy
any data without changing the value of verf and that it will not
commit the data and metadata at a level less than that requested by
the client.
The stateid value for a WRITE request represents a value returned
from a previous byte-range lock or share reservation request or the
stateid associated with a delegation. The stateid is used by the
server to verify that the associated share reservation and any
byte-range locks are still valid and to update lease timeouts for the
client.
Upon successful completion, the following results are returned. The
count result is the number of bytes of data written to the file. The
server may write fewer bytes than requested. If so, the actual
number of bytes written starting at location, offset, is returned.
The server also returns an indication of the level of commitment of
the data and metadata via committed. If the server committed all
data and metadata to stable storage, committed should be set to
FILE_SYNC4. If the level of commitment was at least as strong as
DATA_SYNC4, then committed should be set to DATA_SYNC4. Otherwise,
committed must be returned as UNSTABLE4. If stable was FILE4_SYNC,
then committed must also be FILE_SYNC4: anything else constitutes a
protocol violation. If stable was DATA_SYNC4, then committed may be
FILE_SYNC4 or DATA_SYNC4: anything else constitutes a protocol
violation. If stable was UNSTABLE4, then committed may be either
FILE_SYNC4, DATA_SYNC4, or UNSTABLE4.
Haynes & Noveck Standards Track PAGE 300
RFC 7530 NFSv4 March 2015
The final portion of the result is the write verifier. The write
verifier is a cookie that the client can use to determine whether the
server has changed instance (boot) state between a call to WRITE and
a subsequent call to either WRITE or COMMIT. This cookie must be
consistent during a single instance of the NFSv4 protocol service and
must be unique between instances of the NFSv4 protocol server, where
uncommitted data may be lost.
If a client writes data to the server with the stable argument set to
UNSTABLE4 and the reply yields a committed response of DATA_SYNC4 or
UNSTABLE4, the client will follow up at some time in the future with
a COMMIT operation to synchronize outstanding asynchronous data and
metadata with the server's stable storage, barring client error. It
is possible that due to client crash or other error a subsequent
COMMIT will not be received by the server.
For a WRITE using the special anonymous stateid, the server MAY allow
the WRITE to be serviced subject to mandatory file locks or the
current share deny modes for the file. For a WRITE using the special
READ bypass stateid, the server MUST NOT allow the WRITE operation to
bypass locking checks at the server, and the WRITE is treated exactly
the same as if the anonymous stateid were used.
On success, the current filehandle retains its value.
16.36.5. IMPLEMENTATION
It is possible for the server to write fewer bytes of data than
requested by the client. In this case, the server should not return
an error unless no data was written at all. If the server writes
less than the number of bytes specified, the client should issue
another WRITE to write the remaining data.
It is assumed that the act of writing data to a file will cause the
time_modify attribute of the file to be updated. However, the
time_modify attribute of the file should not be changed unless the
contents of the file are changed. Thus, a WRITE request with count
set to 0 should not cause the time_modify attribute of the file to be
updated.
Haynes & Noveck Standards Track PAGE 301
RFC 7530 NFSv4 March 2015
The definition of stable storage has been historically a point of
contention. The following expected properties of stable storage may
help in resolving design issues in the implementation. Stable
storage is persistent storage that survives:
1. Repeated power failures.
2. Hardware failures (of any board, power supply, etc.).
3. Repeated software crashes, including reboot cycle.
This definition does not address failure of the stable storage module
itself.
The verifier is defined to allow a client to detect different
instances of an NFSv4 protocol server over which cached, uncommitted
data may be lost. In the most likely case, the verifier allows the
client to detect server reboots. This information is required so
that the client can safely determine whether the server could have
lost cached data. If the server fails unexpectedly and the client
has uncommitted data from previous WRITE requests (done with the
stable argument set to UNSTABLE4 and in which the result committed
was returned as UNSTABLE4 as well), it may not have flushed cached
data to stable storage. The burden of recovery is on the client, and
the client will need to retransmit the data to the server.
One suggested way to use the verifier would be to use the time that
the server was booted or the time the server was last started (if
restarting the server without a reboot results in lost buffers).
The committed field in the results allows the client to do more
effective caching. If the server is committing all WRITE requests to
stable storage, then it should return with committed set to
FILE_SYNC4, regardless of the value of the stable field in the
arguments. A server that uses an NVRAM accelerator may choose to
implement this policy. The client can use this to increase the
effectiveness of the cache by discarding cached data that has already
been committed on the server.
Some implementations may return NFS4ERR_NOSPC instead of
NFS4ERR_DQUOT when a user's quota is exceeded. In the case that the
current filehandle is a directory, the server will return
NFS4ERR_ISDIR. If the current filehandle is not a regular file or a
directory, the server will return NFS4ERR_INVAL.
Haynes & Noveck Standards Track PAGE 302
RFC 7530 NFSv4 March 2015
If mandatory file locking is on for the file, and a corresponding
record of the data to be written to file is read or write locked by
an owner that is not associated with the stateid, the server will
return NFS4ERR_LOCKED. If so, the client must check if the owner
corresponding to the stateid used with the WRITE operation has a
conflicting read lock that overlaps with the region that was to be
written. If the stateid's owner has no conflicting read lock, then
the client should try to get the appropriate write byte-range lock
via the LOCK operation before re-attempting the WRITE. When the
WRITE completes, the client should release the byte-range lock via
LOCKU.
If the stateid's owner had a conflicting read lock, then the client
has no choice but to return an error to the application that
attempted the WRITE. The reason is that since the stateid's owner
had a read lock, the server either (1) attempted to temporarily
effectively upgrade this read lock to a write lock or (2) has no
upgrade capability. If the server attempted to upgrade the read lock
and failed, it is pointless for the client to re-attempt the upgrade
via the LOCK operation, because there might be another client also
trying to upgrade. If two clients are blocked trying to upgrade the
same lock, the clients deadlock. If the server has no upgrade
capability, then it is pointless to try a LOCK operation to upgrade.
Haynes & Noveck Standards Track PAGE 303
RFC 7530 NFSv4 March 2015
16.37. Operation 39: RELEASE_LOCKOWNER - Release Lock-Owner State
16.37.1. SYNOPSIS
lock-owner -> ()
16.37.2. ARGUMENT
struct RELEASE_LOCKOWNER4args {
lock_owner4 lock_owner;
};
16.37.3. RESULT
struct RELEASE_LOCKOWNER4res {
nfsstat4 status;
};
16.37.4. DESCRIPTION
This operation is used to notify the server that the lock_owner is no
longer in use by the client and that future client requests will not
reference this lock_owner. This allows the server to release cached
state related to the specified lock_owner. If file locks associated
with the lock_owner are held at the server, the error
NFS4ERR_LOCKS_HELD will be returned and no further action will be
taken.
16.37.5. IMPLEMENTATION
The client may choose to use this operation to ease the amount of
server state that is held. Information that can be released when a
RELEASE_LOCKOWNER is done includes the specified lock-owner string,
the seqid associated with the lock-owner, any saved reply for the
lock-owner, and any lock stateids associated with that lock-owner.
Depending on the behavior of applications at the client, it may be
important for the client to use this operation since the server
has certain obligations with respect to holding a reference to
lock-owner-associated state as long as an associated file is open.
Therefore, if the client knows for certain that the lock_owner will
no longer be used to either reference existing lock stateids
associated with the lock-owner or create new ones, it should use
RELEASE_LOCKOWNER.
Haynes & Noveck Standards Track PAGE 304
RFC 7530 NFSv4 March 2015
16.38. Operation 10044: ILLEGAL - Illegal Operation
16.38.1. SYNOPSIS
<null> -> ()
16.38.2. ARGUMENT
void;
16.38.3. RESULT
struct ILLEGAL4res {
nfsstat4 status;
};
16.38.4. DESCRIPTION
This operation is a placeholder for encoding a result to handle the
case of the client sending an operation code within COMPOUND that is
not supported. See Section 15.2.4 for more details.
The status field of ILLEGAL4res MUST be set to NFS4ERR_OP_ILLEGAL.
16.38.5. IMPLEMENTATION
A client will probably not send an operation with code OP_ILLEGAL,
but if it does, the response will be ILLEGAL4res, just as it would be
with any other invalid operation code. Note that if the server gets
an illegal operation code that is not OP_ILLEGAL, and if the server
checks for legal operation codes during the XDR decode phase, then
the ILLEGAL4res would not be returned.
Haynes & Noveck Standards Track PAGE 305
RFC 7530 NFSv4 March 2015
17. NFSv4 Callback Procedures
The procedures used for callbacks are defined in the following
sections. In the interest of clarity, the terms "client" and
"server" refer to NFS clients and servers, despite the fact that for
an individual callback RPC, the sense of these terms would be
precisely the opposite.
17.1. Procedure 0: CB_NULL - No Operation
17.1.1. SYNOPSIS
<null>
17.1.2. ARGUMENT
void;
17.1.3. RESULT
void;
17.1.4. DESCRIPTION
Standard NULL procedure. Void argument, void response. Even though
there is no direct functionality associated with this procedure, the
server will use CB_NULL to confirm the existence of a path for RPCs
from server to client.
Haynes & Noveck Standards Track PAGE 306
RFC 7530 NFSv4 March 2015
17.2. Procedure 1: CB_COMPOUND - COMPOUND Operations
17.2.1. SYNOPSIS
compoundargs -> compoundres
17.2.2. ARGUMENT
enum nfs_cb_opnum4 {
OP_CB_GETATTR = 3,
OP_CB_RECALL = 4,
OP_CB_ILLEGAL = 10044
};
union nfs_cb_argop4 switch (unsigned argop) {
case OP_CB_GETATTR:
CB_GETATTR4args opcbgetattr;
case OP_CB_RECALL:
CB_RECALL4args opcbrecall;
case OP_CB_ILLEGAL: void;
};
struct CB_COMPOUND4args {
utf8str_cs tag;
uint32_t minorversion;
uint32_t callback_ident;
nfs_cb_argop4 argarray<>;
};
17.2.3. RESULT
union nfs_cb_resop4 switch (unsigned resop) {
case OP_CB_GETATTR: CB_GETATTR4res opcbgetattr;
case OP_CB_RECALL: CB_RECALL4res opcbrecall;
case OP_CB_ILLEGAL: CB_ILLEGAL4res opcbillegal;
};
struct CB_COMPOUND4res {
nfsstat4 status;
utf8str_cs tag;
nfs_cb_resop4 resarray<>;
};
Haynes & Noveck Standards Track PAGE 307
RFC 7530 NFSv4 March 2015
17.2.4. DESCRIPTION
The CB_COMPOUND procedure is used to combine one or more of the
callback procedures into a single RPC request. The main callback RPC
program has two main procedures: CB_NULL and CB_COMPOUND. All other
operations use the CB_COMPOUND procedure as a wrapper.
In the processing of the CB_COMPOUND procedure, the client may find
that it does not have the available resources to execute any or all
of the operations within the CB_COMPOUND sequence. In this case, the
error NFS4ERR_RESOURCE will be returned for the particular operation
within the CB_COMPOUND procedure where the resource exhaustion
occurred. This assumes that all previous operations within the
CB_COMPOUND sequence have been evaluated successfully.
Contained within the CB_COMPOUND results is a status field. This
status must be equivalent to the status of the last operation that
was executed within the CB_COMPOUND procedure. Therefore, if an
operation incurred an error, then the status value will be the same
error value as is being returned for the operation that failed.
For the definition of the tag field, see Section 15.2.
The value of callback_ident is supplied by the client during
SETCLIENTID. The server must use the client-supplied callback_ident
during the CB_COMPOUND to allow the client to properly identify the
server.
Illegal operation codes are handled in the same way as they are
handled for the COMPOUND procedure.
17.2.5. IMPLEMENTATION
The CB_COMPOUND procedure is used to combine individual operations
into a single RPC request. The client interprets each of the
operations in turn. If an operation is executed by the client and
the status of that operation is NFS4_OK, then the next operation in
the CB_COMPOUND procedure is executed. The client continues this
process until there are no more operations to be executed or one of
the operations has a status value other than NFS4_OK.
Haynes & Noveck Standards Track PAGE 308
RFC 7530 NFSv4 March 2015
18. NFSv4 Callback Operations
18.1. Operation 3: CB_GETATTR - Get Attributes
18.1.1. SYNOPSIS
fh, attr_request -> attrmask, attr_vals
18.1.2. ARGUMENT
struct CB_GETATTR4args {
nfs_fh4 fh;
bitmap4 attr_request;
};
18.1.3. RESULT
struct CB_GETATTR4resok {
fattr4 obj_attributes;
};
union CB_GETATTR4res switch (nfsstat4 status) {
case NFS4_OK:
CB_GETATTR4resok resok4;
default:
void;
};
18.1.4. DESCRIPTION
The CB_GETATTR operation is used by the server to obtain the current
modified state of a file that has been OPEN_DELEGATE_WRITE delegated.
The size attribute and the change attribute are the only ones
guaranteed to be serviced by the client. See Section 10.4.3 for a
full description of how the client and server are to interact with
the use of CB_GETATTR.
If the filehandle specified is not one for which the client holds an
OPEN_DELEGATE_WRITE delegation, an NFS4ERR_BADHANDLE error is
returned.
18.1.5. IMPLEMENTATION
The client returns attrmask bits and the associated attribute values
only for the change attribute, and attributes that it may change
(time_modify and size).
Haynes & Noveck Standards Track PAGE 309
RFC 7530 NFSv4 March 2015
18.2. Operation 4: CB_RECALL - Recall an Open Delegation
18.2.1. SYNOPSIS
stateid, truncate, fh -> ()
18.2.2. ARGUMENT
struct CB_RECALL4args {
stateid4 stateid;
bool truncate;
nfs_fh4 fh;
};
18.2.3. RESULT
struct CB_RECALL4res {
nfsstat4 status;
};
18.2.4. DESCRIPTION
The CB_RECALL operation is used to begin the process of recalling an
open delegation and returning it to the server.
The truncate flag is used to optimize a recall for a file that is
about to be truncated to zero. When it is set, the client is freed
of obligation to propagate modified data for the file to the server,
since this data is irrelevant.
If the handle specified is not one for which the client holds an open
delegation, an NFS4ERR_BADHANDLE error is returned.
If the stateid specified is not one corresponding to an open
delegation for the file specified by the filehandle, an
NFS4ERR_BAD_STATEID is returned.
18.2.5. IMPLEMENTATION
The client should reply to the callback immediately. Replying does
not complete the recall, except when an error was returned. The
recall is not complete until the delegation is returned using a
DELEGRETURN.
Haynes & Noveck Standards Track PAGE 310
RFC 7530 NFSv4 March 2015
18.3. Operation 10044: CB_ILLEGAL - Illegal Callback Operation
18.3.1. SYNOPSIS
<null> -> ()
18.3.2. ARGUMENT
void;
18.3.3. RESULT
/*
* CB_ILLEGAL: Response for illegal operation numbers
*/
struct CB_ILLEGAL4res {
nfsstat4 status;
};
18.3.4. DESCRIPTION
This operation is a placeholder for encoding a result to handle the
case of the client sending an operation code within COMPOUND that is
not supported. See Section 15.2.4 for more details.
The status field of CB_ILLEGAL4res MUST be set to NFS4ERR_OP_ILLEGAL.
18.3.5. IMPLEMENTATION
A server will probably not send an operation with code OP_CB_ILLEGAL,
but if it does, the response will be CB_ILLEGAL4res, just as it would
be with any other invalid operation code. Note that if the client
gets an illegal operation code that is not OP_ILLEGAL, and if the
client checks for legal operation codes during the XDR decode phase,
then the CB_ILLEGAL4res would not be returned.
Haynes & Noveck Standards Track PAGE 311
RFC 7530 NFSv4 March 2015
19. Security Considerations
NFS has historically used a model where, from an authentication
perspective, the client was the entire machine, or at least the
source IP address of the machine. The NFS server relied on the NFS
client to make the proper authentication of the end-user. The NFS
server in turn shared its files only to specific clients, as
identified by the client's source IP address. Given this model, the
AUTH_SYS RPC security flavor simply identified the end-user using the
client to the NFS server. When processing NFS responses, the client
ensured that the responses came from the same IP address and port
number that the request was sent to. While such a model is easy to
implement and simple to deploy and use, it is certainly not a safe
model. Thus, NFSv4 mandates that implementations support a security
model that uses end-to-end authentication, where an end-user on a
client mutually authenticates (via cryptographic schemes that do not
expose passwords or keys in the clear on the network) to a principal
on an NFS server. Consideration should also be given to the
integrity and privacy of NFS requests and responses. The issues of
end-to-end mutual authentication, integrity, and privacy are
discussed as part of Section 3.
When an NFSv4 mandated security model is used and a security
principal or an NFSv4 name in user@dns_domain form needs to be
translated to or from a local representation as described in
Section 5.9, the translation SHOULD be done in a secure manner that
preserves the integrity of the translation. For communication with a
name service such as the Lightweight Directory Access Protocol (LDAP)
([RFC 4511]), this means employing a security service that uses
authentication and data integrity. Kerberos and Transport Layer
Security (TLS) ([RFC 5246]) are examples of such a security service.
Note that being REQUIRED to implement does not mean REQUIRED to use;
AUTH_SYS can be used by NFSv4 clients and servers. However, AUTH_SYS
is merely an OPTIONAL security flavor in NFSv4, and so
interoperability via AUTH_SYS is not assured.
For reasons of reduced administration overhead, better performance,
and/or reduction of CPU utilization, users of NFSv4 implementations
may choose to not use security mechanisms that enable integrity
protection on each remote procedure call and response. The use of
mechanisms without integrity leaves the customer vulnerable to an
attacker in between the NFS client and server that modifies the RPC
request and/or the response. While implementations are free to
provide the option to use weaker security mechanisms, there are two
operations in particular that warrant the implementation overriding
user choices.
Haynes & Noveck Standards Track PAGE 312
RFC 7530 NFSv4 March 2015
The first such operation is SECINFO. It is recommended that the
client issue the SECINFO call such that it is protected with a
security flavor that has integrity protection, such as RPCSEC_GSS
with a security triple that uses either rpc_gss_svc_integrity or
rpc_gss_svc_privacy (rpc_gss_svc_privacy includes integrity
protection) service. Without integrity protection encapsulating
SECINFO and therefore its results, an attacker in the middle could
modify results such that the client might select a weaker algorithm
in the set allowed by the server, making the client and/or server
vulnerable to further attacks.
The second operation that SHOULD use integrity protection is any
GETATTR for the fs_locations attribute. The attack has two steps.
First, the attacker modifies the unprotected results of some
operation to return NFS4ERR_MOVED. Second, when the client follows
up with a GETATTR for the fs_locations attribute, the attacker
modifies the results to cause the client to migrate its traffic to a
server controlled by the attacker.
Because the operations SETCLIENTID/SETCLIENTID_CONFIRM are
responsible for the release of client state, it is imperative that
the principal used for these operations is checked against and
matches with the previous use of these operations. See Section 9.1.1
for further discussion.
Unicode in the form of UTF-8 is used for file component names (i.e.,
both directory and file components), as well as the owner and
owner_group attributes; other character sets may also be allowed for
file component names. String processing (e.g., Unicode
normalization) raises security concerns for string comparison. See
Sections 5.9 and 12 for further discussion, and see [RFC 6943] for
related identifier comparison security considerations. File
component names are identifiers with respect to the identifier
comparison discussion in [RFC 6943] because they are used to identify
the objects to which ACLs are applied; see Section 6.
Haynes & Noveck Standards Track PAGE 313
RFC 7530 NFSv4 March 2015
20. IANA Considerations
This section uses terms that are defined in [RFC 5226].
20.1. Named Attribute Definitions
IANA has created a registry called the "NFSv4 Named Attribute
Definitions Registry" for [RFC 3530] and [RFC 5661]. This section
introduces no new changes, but it does recap the intent.
The NFSv4 protocol supports the association of a file with zero or
more named attributes. The namespace identifiers for these
attributes are defined as string names. The protocol does not define
the specific assignment of the namespace for these file attributes.
The IANA registry promotes interoperability where common interests
exist. While application developers are allowed to define and use
attributes as needed, they are encouraged to register the attributes
with IANA.
Such registered named attributes are presumed to apply to all minor
versions of NFSv4, including those defined subsequently to the
registration. Where the named attribute is intended to be limited
with regard to the minor versions for which they are not to be used,
the assignment in the registry will clearly state the applicable
limits.
The registry is to be maintained using the Specification Required
policy as defined in Section 4.1 of [RFC 5226].
Under the NFSv4 specification, the name of a named attribute can in
theory be up to 2^32 - 1 bytes in length, but in practice NFSv4
clients and servers will be unable to handle a string that long.
IANA should reject any assignment request with a named attribute that
exceeds 128 UTF-8 characters. To give the IESG the flexibility to
set up bases of assignment of Experimental Use and Standards Action,
the prefixes of "EXPE" and "STDS" are Reserved. The zero-length
named attribute name is Reserved.
The prefix "PRIV" is allocated for Private Use. A site that wants to
make use of unregistered named attributes without risk of conflicting
with an assignment in IANA's registry should use the prefix "PRIV" in
all of its named attributes.
Haynes & Noveck Standards Track PAGE 314
RFC 7530 NFSv4 March 2015
Because some NFSv4 clients and servers have case-insensitive
semantics, the fifteen additional lowercase and mixed-case
permutations of each of "EXPE", "PRIV", and "STDS" are Reserved
(e.g., "expe", "expE", "exPe", etc. are Reserved). Similarly, IANA
must not allow two assignments that would conflict if both named
attributes were converted to a common case.
The registry of named attributes is a list of assignments, each
containing three fields for each assignment.
1. A US-ASCII string name that is the actual name of the attribute.
This name must be unique. This string name can be 1 to 128 UTF-8
characters long.
2. A reference to the specification of the named attribute. The
reference can consume up to 256 bytes (or more, if IANA permits).
3. The point of contact of the registrant. The point of contact can
consume up to 256 bytes (or more, if IANA permits).
20.1.1. Initial Registry
There is no initial registry.
20.1.2. Updating Registrations
The registrant is always permitted to update the point of contact
field. To make any other change will require Expert Review or IESG
Approval.
20.2. Updates to Existing IANA Registries
In addition, because this document obsoletes RFC 3530, IANA has
o replaced all references to RFC 3530 in the Network Identifier
(r_netid) registry with references to this document.
o replaced the reference to the nfs registration's reference to
RFC 3530 in the GSSAPI/Kerberos/SASL Service names registry with a
reference to this document.
Haynes & Noveck Standards Track PAGE 315
RFC 7530 NFSv4 March 2015
21. References
21.1. Normative References
[RFC 20] Cerf, V., "ASCII format for network interchange", STD 80,
RFC 20, October 1969,
<http://www.rfc-editor.org/info/RFC 20>.
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997,
<http://www.rfc-editor.org/info/RFC 2119>.
[RFC 2203] Eisler, M., Chiu, A., and L. Ling, "RPCSEC_GSS Protocol
Specification", RFC 2203, September 1997,
<http://www.rfc-editor.org/info/RFC 2203>.
[RFC 2743] Linn, J., "Generic Security Service Application Program
Interface Version 2, Update 1", RFC 2743, January 2000,
<http://www.rfc-editor.org/info/RFC 2743>.
[RFC 3490] Faltstrom, P., Hoffman, P., and A. Costello,
"Internationalizing Domain Names in Applications (IDNA)",
RFC 3490, March 2003,
<http://www.rfc-editor.org/info/RFC 3490>.
[RFC 3492] Costello, A., "Punycode: A Bootstring encoding of Unicode
for Internationalized Domain Names in Applications
(IDNA)", RFC 3492, March 2003,
<http://www.rfc-editor.org/info/RFC 3492>.
[RFC 3629] Yergeau, F., "UTF-8, a transformation format of
ISO 10646", STD 63, RFC 3629, November 2003,
<http://www.rfc-editor.org/info/RFC 3629>.
[RFC 5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008, <http://www.rfc-editor.org/info/RFC 5226>.
[RFC 5403] Eisler, M., "RPCSEC_GSS Version 2", RFC 5403,
February 2009, <http://www.rfc-editor.org/info/RFC 5403>.
[RFC 5531] Thurlow, R., "RPC: Remote Procedure Call Protocol
Specification Version 2", RFC 5531, May 2009,
<http://www.rfc-editor.org/info/RFC 5531>.
Haynes & Noveck Standards Track PAGE 316
RFC 7530 NFSv4 March 2015
[RFC 5665] Eisler, M., "IANA Considerations for Remote Procedure Call
(RPC) Network Identifiers and Universal Address Formats",
RFC 5665, January 2010,
<http://www.rfc-editor.org/info/RFC 5665>.
[RFC 5890] Klensin, J., "Internationalized Domain Names for
Applications (IDNA): Definitions and Document Framework",
RFC 5890, August 2010,
<http://www.rfc-editor.org/info/RFC 5890>.
[RFC 5891] Klensin, J., "Internationalized Domain Names in
Applications (IDNA): Protocol", RFC 5891, August 2010,
<http://www.rfc-editor.org/info/RFC 5891>.
[RFC 6649] Hornquist Astrand, L. and T. Yu, "Deprecate DES,
RC4-HMAC-EXP, and Other Weak Cryptographic Algorithms in
Kerberos", BCP 179, RFC 6649, July 2012,
<http://www.rfc-editor.org/info/RFC 6649>.
[RFC 7531] Haynes, T., Ed., and D. Noveck, Ed., "Network File System
(NFS) Version 4 External Data Representation Standard
(XDR) Description", RFC 7531, March 2015,
<http://www.rfc-editor.org/info/RFC 7531>.
[SPECIALCASING]
The Unicode Consortium, "SpecialCasing-7.0.0.txt", Unicode
Character Database, March 2014, <http://www.unicode.org/
Public/UCD/latest/ucd/SpecialCasing.txt>.
[UNICODE] The Unicode Consortium, "The Unicode Standard,
Version 7.0.0", (Mountain View, CA: The Unicode
Consortium, 2014 ISBN 978-1-936213-09-2), June 2014,
<http://www.unicode.org/versions/latest/>.
[openg_symlink]
The Open Group, "Section 3.372 of Chapter 3 of Base
Definitions of The Open Group Base Specifications
Issue 7", IEEE Std 1003.1, 2013 Edition (HTML Version),
ISBN 1937218287, April 2013, <http://www.opengroup.org/>.
Haynes & Noveck Standards Track PAGE 317
RFC 7530 NFSv4 March 2015
21.2. Informative References
[Chet] Juszczak, C., "Improving the Performance and Correctness
of an NFS Server", USENIX Conference Proceedings,
June 1990.
[Floyd] Floyd, S. and V. Jacobson, "The Synchronization of
Periodic Routing Messages", IEEE/ACM Transactions on
Networking 2(2), pp. 122-136, April 1994.
[IESG_ERRATA]
IESG, "IESG Processing of RFC Errata for the IETF Stream",
July 2008.
[MS-SMB] Microsoft Corporation, "Server Message Block (SMB)
Protocol Specification", MS-SMB 43.0, May 2014.
[P1003.1e]
Institute of Electrical and Electronics Engineers, Inc.,
"IEEE Draft P1003.1e", 1997.
[RFC 1094] Nowicki, B., "NFS: Network File System Protocol
specification", RFC 1094, March 1989,
<http://www.rfc-editor.org/info/RFC 1094>.
[RFC 1813] Callaghan, B., Pawlowski, B., and P. Staubach, "NFS
Version 3 Protocol Specification", RFC 1813, June 1995,
<http://www.rfc-editor.org/info/RFC 1813>.
[RFC 1833] Srinivasan, R., "Binding Protocols for ONC RPC Version 2",
RFC 1833, August 1995,
<http://www.rfc-editor.org/info/RFC 1833>.
[RFC 2054] Callaghan, B., "WebNFS Client Specification", RFC 2054,
October 1996, <http://www.rfc-editor.org/info/RFC 2054>.
[RFC 2055] Callaghan, B., "WebNFS Server Specification", RFC 2055,
October 1996, <http://www.rfc-editor.org/info/RFC 2055>.
[RFC 2224] Callaghan, B., "NFS URL Scheme", RFC 2224, October 1997,
<http://www.rfc-editor.org/info/RFC 2224>.
[RFC 2623] Eisler, M., "NFS Version 2 and Version 3 Security Issues
and the NFS Protocol's Use of RPCSEC_GSS and Kerberos V5",
RFC 2623, June 1999,
<http://www.rfc-editor.org/info/RFC 2623>.
Haynes & Noveck Standards Track PAGE 318
RFC 7530 NFSv4 March 2015
[RFC 2624] Shepler, S., "NFS Version 4 Design Considerations",
RFC 2624, June 1999,
<http://www.rfc-editor.org/info/RFC 2624>.
[RFC 2755] Chiu, A., Eisler, M., and B. Callaghan, "Security
Negotiation for WebNFS", RFC 2755, January 2000,
<http://www.rfc-editor.org/info/RFC 2755>.
[RFC 3010] Shepler, S., Callaghan, B., Robinson, D., Thurlow, R.,
Beame, C., Eisler, M., and D. Noveck, "NFS version 4
Protocol", RFC 3010, December 2000,
<http://www.rfc-editor.org/info/RFC 3010>.
[RFC 3232] Reynolds, J., Ed., "Assigned Numbers: RFC 1700 is Replaced
by an On-line Database", RFC 3232, January 2002,
<http://www.rfc-editor.org/info/RFC 3232>.
[RFC 3530] Shepler, S., Callaghan, B., Robinson, D., Thurlow, R.,
Beame, C., Eisler, M., and D. Noveck, "Network File System
(NFS) version 4 Protocol", RFC 3530, April 2003,
<http://www.rfc-editor.org/info/RFC 3530>.
[RFC 4121] Zhu, L., Jaganathan, K., and S. Hartman, "The Kerberos
Version 5 Generic Security Service Application Program
Interface (GSS-API) Mechanism: Version 2", RFC 4121,
July 2005, <http://www.rfc-editor.org/info/RFC 4121>.
[RFC 4178] Zhu, L., Leach, P., Jaganathan, K., and W. Ingersoll, "The
Simple and Protected Generic Security Service Application
Program Interface (GSS-API) Negotiation Mechanism",
RFC 4178, October 2005,
<http://www.rfc-editor.org/info/RFC 4178>.
[RFC 4506] Eisler, M., Ed., "XDR: External Data Representation
Standard", STD 67, RFC 4506, May 2006,
<http://www.rfc-editor.org/info/RFC 4506>.
[RFC 4511] Sermersheim, J., Ed., "Lightweight Directory Access
Protocol (LDAP): The Protocol", RFC 4511, June 2006,
<http://www.rfc-editor.org/info/RFC 4511>.
[RFC 5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008,
<http://www.rfc-editor.org/info/RFC 5246>.
Haynes & Noveck Standards Track PAGE 319
RFC 7530 NFSv4 March 2015
[RFC 5661] Shepler, S., Ed., Eisler, M., Ed., and D. Noveck, Ed.,
"Network File System (NFS) Version 4 Minor Version 1
Protocol", RFC 5661, January 2010,
<http://www.rfc-editor.org/info/RFC 5661>.
[RFC 6365] Hoffman, P. and J. Klensin, "Terminology Used in
Internationalization in the IETF", BCP 166, RFC 6365,
September 2011, <http://www.rfc-editor.org/info/RFC 6365>.
[RFC 6943] Thaler, D., Ed., "Issues in Identifier Comparison for
Security Purposes", RFC 6943, May 2013,
<http://www.rfc-editor.org/info/RFC 6943>.
[fcntl] The Open Group, "Section 'fcntl()' of System Interfaces of
The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[fsync] The Open Group, "Section 'fsync()' of System Interfaces of
The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[getpwnam]
The Open Group, "Section 'getpwnam()' of System Interfaces
of The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[read_api]
The Open Group, "Section 'read()' of System Interfaces of
The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[readdir_api]
The Open Group, "Section 'readdir()' of System Interfaces
of The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[stat] The Open Group, "Section 'stat()' of System Interfaces of
The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
Haynes & Noveck Standards Track PAGE 320
RFC 7530 NFSv4 March 2015
[unlink] The Open Group, "Section 'unlink()' of System Interfaces
of The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[write_api]
The Open Group, "Section 'write()' of System Interfaces of
The Open Group Base Specifications Issue 7", IEEE
Std 1003.1, 2013 Edition (HTML Version), ISBN 1937218287,
April 2013, <http://www.opengroup.org/>.
[xnfs] The Open Group, "Protocols for Interworking: XNFS,
Version 3W, ISBN 1-85912-184-5", February 1998.
Haynes & Noveck Standards Track PAGE 321
RFC 7530 NFSv4 March 2015
Acknowledgments
A bis is certainly built on the shoulders of the first attempt.
Spencer Shepler, Brent Callaghan, David Robinson, Robert Thurlow,
Carl Beame, Mike Eisler, and David Noveck are responsible for a great
deal of the effort in this work.
Tom Haynes would like to thank NetApp, Inc. for its funding of his
time on this project.
Rob Thurlow clarified how a client should contact a new server if a
migration has occurred.
David Black, Nico Williams, Mike Eisler, Trond Myklebust, James
Lentini, and Mike Kupfer read many earlier draft versions of
Section 12 and contributed numerous useful suggestions, without which
the necessary revision of that section for this document would not
have been possible.
Peter Staubach read almost all of the earlier draft versions of
Section 12, leading to the published result, and his numerous
comments were always useful and contributed substantially to
improving the quality of the final result.
Peter Saint-Andre was gracious enough to read the most recent draft
version of Section 12 and provided some key insight as to the
concerns of the Internationalization community.
James Lentini graciously read the rewrite of Section 8, and his
comments were vital in improving the quality of that effort.
Rob Thurlow, Sorin Faibish, James Lentini, Bruce Fields, and Trond
Myklebust were faithful attendants of the biweekly triage meeting and
accepted many an action item.
Bruce Fields was a good sounding board for both the third edge
condition and courtesy locks in general. He was also the leading
advocate of stamping out backport issues from [RFC 5661].
Marcel Telka was a champion of straightening out the difference
between a lock-owner and an open-owner. He has also been diligent in
reviewing the final document.
Benjamin Kaduk reminded us that DES is dead, and Nico Williams helped
us close the lid on the coffin.
Elwyn Davies provided a very thorough and engaging Gen-ART review;
thanks!
Haynes & Noveck Standards Track PAGE 322
RFC 7530 NFSv4 March 2015
Authors' Addresses
Thomas Haynes (editor)
Primary Data, Inc.
4300 El Camino Real Ste 100
Los Altos, CA 94022
United States
Phone: +1 408 215 1519
EMail: thomas.haynes@primarydata.com
David Noveck (editor)
Dell
300 Innovative Way
Nashua, NH 03062
United States
Phone: +1 781 572 8038
EMail: dave_noveck@dell.com
Haynes & Noveck Standards Track PAGE 323
RFC TOTAL SIZE: 724613 bytes
PUBLICATION DATE: Thursday, March 26th, 2015
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
