|
|
|
|
|
|
IETF RFC 5675
Mapping Simple Network Management Protocol (SNMP) Notifications to SYSLOG Messages
Last modified on Monday, October 19th, 2009
 Permanent link to RFC 5675
 Search GitHub Wiki for RFC 5675
 Show other RFCs mentioning RFC 5675
Network Working Group V. Marinov
Request for Comments: 5675 J. Schoenwaelder
Category: Standards Track Jacobs University Bremen
October 2009
Mapping Simple Network Management Protocol (SNMP)
Notifications to SYSLOG Messages
 Abstract
This memo defines a mapping from Simple Network Management Protocol
(SNMP) notifications to SYSLOG messages.
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the BSD License.
Marinov & Schoenwaelder Standards Track PAGE 1 
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Conventions . . . . . . . . . . . . . . . . . . . . . . . 2
2. Background . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. SNMP Notifications . . . . . . . . . . . . . . . . . . . . 3
2.2. SYSLOG Notifications . . . . . . . . . . . . . . . . . . . 5
3. Mapping SNMP Notifications to SYSLOG Messages . . . . . . . . 5
3.1. SYSLOG Header . . . . . . . . . . . . . . . . . . . . . . 6
3.2. Structured Data . . . . . . . . . . . . . . . . . . . . . 7
3.3. MSG Data . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Relationship to the SYSLOG-MSG-MIB . . . . . . . . . . . . . . 10
5. Usage Example . . . . . . . . . . . . . . . . . . . . . . . . 10
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12
7. Security Considerations . . . . . . . . . . . . . . . . . . . 13
8. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 13
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.1. Normative References . . . . . . . . . . . . . . . . . . . 13
9.2. Informative References . . . . . . . . . . . . . . . . . . 14
1. Introduction
SNMP and SYSLOG are two widely used protocols to communicate event
notifications. Although co-existence of several management protocols
in one operational environment is possible, certain environments
require that all event notifications be collected by a single system
daemon, such as a SYSLOG collector or an SNMP notification receiver,
via a single management protocol. In such environments, it is
necessary to translate event notifications between management
protocols.
The latest version of SYSLOG, specified in [RFC 5424], supports a
structured data element format. Structured data elements allow us to
map between SNMP notifications and SYSLOG messages without losing
information. In this memo, we specify a concrete mapping from SNMP
event notifications [RFC 3416] into SYSLOG messages [RFC 5424]. We
specify how the SYSLOG message format should be utilized to carry the
information contained in an SNMP notification message. A new SYSLOG
structured data element is defined, which carries the PDU portion of
an SNMP notification message.
1.1. Conventions
A system that has the capability of receiving SNMP notification
messages from an SNMP notification originator and sending the SNMP
data contained inside in a SYSLOG message format to a SYSLOG
collector is referred to in this memo as an "SNMP-to-SYSLOG
translator". By definition, such a system should have an SNMP
Marinov & Schoenwaelder Standards Track PAGE 2
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
notification receiver application and a SYSLOG originator running in
order to be able to perform the functions of an "SNMP-to-SYSLOG
translator".
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC 2119].
2. Background
2.1. SNMP Notifications
A detailed introduction to the SNMP Management Framework can be found
in [RFC 3410]. The SNMP Management Architecture is described in
[RFC 3411]. Managed objects are accessed via a virtual information
store, termed the Management Information Base or MIB [RFC 3418].
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI) [RFC 2578].
An SNMP notification message is generated and transmitted by an SNMP
entity on behalf of a notification originator application [RFC 3413].
SNMP notifications are often used to notify a notification receiver
application at a logically remote SNMP entity that an event has
occurred or that a certain condition is present. There are two types
of SNMP protocol operations that are associated with SNMP
notification messages [RFC 3416]:
o SNMPv2-Trap-PDU, an unconfirmed notification delivery mechanism
o InformRequest-PDU, a confirmed notification delivery mechanism
The scopedPDU portion of an SNMPv3 trap or inform message has the
following format [RFC 3412]:
ScopedPDU ::= SEQUENCE {
contextEngineID OCTET STRING,
contextName OCTET STRING,
data ANY -- e.g., PDUs as defined in [RFC 3416]
}
The data member of the SEQUENCE ScopedPDU carries an SNMPv2-Trap-PDU
or an InformRequest-PDU. They both have the same structure:
Marinov & Schoenwaelder Standards Track PAGE 3
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
PDUs ::= [7] IMPLICIT SEQUENCE {
request-id INTEGER,
error-status INTEGER, -- ignored in notifications
error-index INTEGER, -- ignored in notifications
variable-bindings VarBindList
}
-- variable binding
VarBind ::= SEQUENCE {
name ObjectName,
CHOICE {
value ObjectSyntax,
unSpecified NULL, -- in retrieval requests
-- exceptions in responses
noSuchObject [0] IMPLICIT NULL,
noSuchInstance [1] IMPLICIT NULL,
endOfMibView [2] IMPLICIT NULL
}
}
-- variable-binding list
VarBindList ::= SEQUENCE (SIZE (0..max-bindings)) OF VarBind
The first two variable bindings in the variable binding list of an
SNMPv2-Trap-PDU or InformRequest-PDU are sysUpTime.0 [RFC 3418] and
snmpTrapOID.0 [RFC 3418], respectively. If the OBJECTS clause is
present in the invocation of the corresponding NOTIFICATION-TYPE
macro, then each corresponding variable, as instantiated by this
notification, is copied, in order, to the variable-bindings field.
If any additional variables are being included (at the option of the
generating SNMP entity), then each is copied to the variable-bindings
field.
In the case of SNMPv1 or SNMPv2c notifications, the contextEngineID
and the contextName parameters are not present in notification
messages.
This document assumes that notifications are in the format defined in
[RFC 3416]. Notifications in the SNMPv1 notification format MUST be
translated as described in Section 3.1 of [RFC 3584].
Marinov & Schoenwaelder Standards Track PAGE 4
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
2.2. SYSLOG Notifications
The SYSLOG protocol is defined in [RFC 5424]. The message contains a
global header and a number of structured data elements. The ABNF
[RFC 5234] representation of a SYSLOG message is defined in RFC 5424
[RFC 5424]. The relevant productions for structured data elements
are:
STRUCTURED-DATA = NILVALUE / 1*SD-ELEMENT
SD-ELEMENT = "[" SD-ID *(SP SD-PARAM) "]"
SD-PARAM = PARAM-NAME "=" %d34 PARAM-VALUE %d34
SD-ID = SD-NAME
PARAM-NAME = SD-NAME
PARAM-VALUE = UTF-8-STRING ; characters '"', '\' and
; ']' MUST be escaped.
SD-NAME = 1*32PRINTUSASCII
; except '=', SP, ']', %d34 (")
UTF-8-STRING = *OCTET ; Any VALID UTF-8 String
; "shortest form" MUST be used
OCTET = %d00-255
SP = %d32
PRINTUSASCII = %d33-126
NILVALUE = "-"
3. Mapping SNMP Notifications to SYSLOG Messages
In this section, we define how the scopedPDU portion from an SNMP
notification message is used to generate a message in the SYSLOG
format. The notification receiver application at the SNMP-to-SYSLOG
translator is listening for incoming notifications. After a
notification is received by the SNMP engine, the data portion is
forwarded to the notification receiver application. The data portion
contains the scopedPDU of the message, which is used by the SYSLOG
originator on the SNMP-to-SYSLOG translator to generate a SYSLOG
message and send it to a SYSLOG collector (or proxy). Note that
every SNMP notification maps to exactly one SYSLOG message.
Marinov & Schoenwaelder Standards Track PAGE 5
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
+------------+ +------------------+
|snmp | snmp | | syslog +---------+
|notification| notification | +------------+ | message |syslog |
|originator |------------->| |syslog | |-------->|collector|
+------------+ | |originator | | +---------+
+------------+ | +------------+ |
|snmp | snmp | +------------+ | syslog +---------+
|notification| notification | |snmp | | message |syslog |
|originator |------------->| |notification| |-------->|collector|
+------------+ | |receiver | | +---------+
+------------+ | +------------+ |
|snmp | snmp | |
|notification| notification | SNMP-to-SYSLOG |
|originator |------------->| translator |
+------------+ +------------------+
Figure 1: SNMP-to-SYSLOG Translator Deployment
A common deployment scenario is shown in Figure 1. There can be many
SNMP notification originators that send SNMP event notifications to
an SNMP-to-SYSLOG translator. The SNMP-to-SYSLOG translator extracts
the data portion of the notification, generates a SYSLOG message, and
sends the SYSLOG message to a SYSLOG collector, which is responsible
for collecting and storing all notification messages. The arrows in
Figure 1 indicate message flows, not individual messages.
The SNMP-to-SYSLOG translator is not transparent for a SYSLOG
collector. The global header of the SYSLOG message generated by the
SNMP-to-SYSLOG translator is filled with parameters that are specific
for the system running the SNMP-to-SYSLOG translator, such as its
hostname, timestamp, etc. The data portion (scopedPDU for SNMPv3 or
PDU for SNMPv1/SNMPv2c) of the SNMP notification message is contained
in the structured data of the SYSLOG message.
Implementations MUST drop invalid SNMP messages before they are
passed to the SNMP-to-SYSLOG translator.
3.1. SYSLOG Header
The SNMP-to-SYSLOG translator fills the HEADER field of a SYSLOG
message with parameters specific to the system on which it is
running. The default facility level for SYSLOG messages containing
SNMP notifications SHOULD be 3, which corresponds to messages
generated by system daemons. The default severity level SHOULD be 5,
which corresponds to "Notice: normal but significant condition". If
the SNMP-to-SYSLOG translator has a notion of the type of
notification that has been received, it might choose other values for
facility and severity level.
Marinov & Schoenwaelder Standards Track PAGE 6
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
The VERSION, TIMESTAMP, HOSTNAME, APP-NAME, PROCID, and MSGID fields
in the SYSLOG message header are filled with values that are specific
to the system on which the SNMP-to-SYSLOG translator is running. The
character set used in the HEADER MUST be seven-bit ASCII in an eight-
bit field, as described in [RFC 5424].
3.2. Structured Data
The STRUCTURED-DATA field of a SYSLOG message carries the ScopedPDU
(or PDU) portion of an SNMP notification message. For the purpose of
carrying SNMP notification data, a new SD-ID element is defined. The
ABNF [RFC 5234] representation of the new structured element is:
SNMP-SD-ELEMENT = "[" SNMP-SD-ID [CTX] *VARBIND "]"
SNMP-SD-ID = %x73.6E.6D.70 ; snmp
CTX = CTXENGINE CTXNAME
CTXENGINE = SP "ctxEngine=" %d34 HEXSTRING %d34
CTXNAME = SP "ctxName=" %d34 PARAM-VALUE %d34
VARBIND = SP VARNAME [SP VARLABEL] SP VARVALUE [SP VALSTRING]
VARNAME = %d118 NUM "=" %d34 OID %d34 ; "vN="
VARLABEL = %d108 NUM "=" %d34 PARAM-VALUE %d34 ; "lN="
VARVALUE = VALOID / VALHEXSTRING / VALCOUNTER32 / VALCOUNTER64
/ VALUNSIGNED32 / VALINTEGER32 / VALIP / VALNULL
/ VALOPAQUE / VALTIMETICKS / VALSTRING
VALOID = %d111 NUM "=" %d34 OID %d34 ; "oN="
VALHEXSTRING = %d120 NUM "=" %d34 HEXSTRING %d34 ; "xN="
VALCOUNTER32 = %d99 NUM "=" %d34 UNSIGNED32 %d34 ; "cN="
VALCOUNTER64 = %d67 NUM "=" %d34 UNSIGNED64 %d34 ; "CN="
VALUNSIGNED32 = %d117 NUM "=" %d34 UNSIGNED32 %d34 ; "uN="
VALINTEGER32 = %d100 NUM "=" %d34 INTEGER32 %d34 ; "dN="
VALIP = %d105 NUM "=" %d34 IPV4ADDRESS %d34 ; "iN="
VALNULL = %d110 NUM "=" %d34 %d34 ; "nN="
VALOPAQUE = %d112 NUM "=" %d34 HEXSTRING %d34 ; "pN="
VALTIMETICKS = %d116 NUM "=" %d34 UNSIGNED32 %d34 ; "tN="
VALSTRING = %d97 NUM "=" %d34 PARAM-VALUE %d34 ; "aN="
NUM = NONZERODIGIT 0*DIGIT
OID = OIDSTART *("." OIDSUBID)
OIDSTART = (("0." / "1.") [%d49-51] DIGIT) / ("2." OIDSUBID)
OIDSUBID = ZERO / (NONZERODIGIT *DIGIT)
PARAM-VALUE = UTF-8-STRING ; characters '"', '\' and
; ']' MUST be escaped.
UTF-8-STRING = *OCTET ; Any VALID UTF-8 String
; "shortest form" MUST be used
HEXSTRING = *HEX
Marinov & Schoenwaelder Standards Track PAGE 7
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
INTEGER32 = ["-"] NONZERODIGIT 0*DIGIT
UNSIGNED32 = NONZERODIGIT 0*DIGIT
UNSIGNED64 = NONZERODIGIT 0*DIGIT
IPV4ADDRESS = d8 "." d8 "." d8 "." d8
d8 = DIGIT ; 0-9
/ %d49-57 DIGIT ; 10-99
/ "1" 2DIGIT ; 100-199
/ "2" %d48-52 DIGIT ; 200-249
/ "25" %d48-53 ; 250-255
HEX = DIGIT / %x41-46 / %x61-66 ; 0-9 / A-F / a-f
NONZERODIGIT = %d49-57
ZERO = %d48
DIGIT = ZERO / NONZERODIGIT
SP = %d32
Each SNMP-SD-ELEMENT starts with the SD-ID "snmp". The first two
SD-ID parameters are "ctxEngine" and "ctxName". The context MUST be
present in an SNMPv3 notification and therefore "ctxEngine" and
"ctxName" MUST be present in a SYSLOG message generated by an SNMP-
to-SYSLOG translator from an SNMPv3 notification. The
contextEngineID is encoded as an hexadecimal string while the
contextName is encoded as a UTF8 string.
The remaining parameters in the "snmp" SD-ID correspond to the
varbind list elements contained in the SNMP PDU. The name of a
varbind is encoded as an OID in dotted notation. The rendered OID is
carried in a "vN" parameter, where N identifies the position of the
varbind in the varbind list of the SNMP message (the first varbind
having the position 1). A MIB-aware implementation may in addition
generate a parameter "lN" carrying the descriptor of the associated
MIB object plus the instance identifier suffix (also called an OID
label). The number N again identifies the position of the varbind in
the varbind list of the SNMP message.
The value of a varbind is encoded depending on its type according to
the rules shown in Table 1, and type-specific parameter names are
used to convey the type information. The number N again identifies
the position of the varbind in the varbind list of the SNMP message.
A MIB-aware implementation may in addition generate a parameter "aN"
carrying an alternate textual representation of the value, which is
obtained by applying DISPLAY-HINTs and translating named numbers into
corresponding labels or OBJECT IDENTIFIER values to descriptors. For
SNMP object types that have a DISPLAY-HINT of the form 'Ma' or 'Mt',
where M is some number, a MIB-aware implementation can choose to
include the "aN" parameter and to suppress the corresponding "xN"
parameter. This special case saves space for textual objects. A
Marinov & Schoenwaelder Standards Track PAGE 8
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
receiver receiving an "aN" parameter without a matching value at
position N can unambiguously convert the value carried in the "aN"
parameter back to an OCTET STRING value.
While the inclusion of additional parameters carrying OID labels or
alternate value representations increases human readability, this
comes at the cost of increased message size, which may cause
truncation of SYSLOG messages. Therefore, implementations SHOULD
provide a configuration mechanism to enable/disable the generation of
parameters carrying OID labels or alternate value representations.
+--------------------+------------+--------------------------+
| SNMP Type | PARAM-NAME | Value Encoding |
+--------------------+------------+--------------------------+
| OBJECT IDENTIFIER | oN | dotted-decimal notation |
| OCTET STRING | xN | hexadecimal string |
| Counter32 | cN | unsigned decimal number |
| Counter64 | CN | unsigned decimal number |
| Unsigned32 | uN | unsigned decimal number |
| INTEGER, Integer32 | dN | signed decimal number |
| IpAddress | iN | dotted quad notation |
| Opaque | pN | hexadecimal (BER) string |
| TimeTicks | tN | unsigned decimal number |
| NULL | nN | zero-length string |
+--------------------+------------+--------------------------+
Table 1: Mapping of SNMP Types to SD Params
The SYSLOG message generated by the SNMP-to-SYSLOG translator may, in
addition to the SNMP-SD-ELEMENT, include other structured data
elements in its structured data part. These additional structured
data elements MUST comply with the specification in [RFC 5424].
In particular, the parameters in the "origin" SD-ID SHOULD identify
the originator of the SNMP notification. A suitable value for the
"ip" parameter MAY be taken from the snmpTrapAddress varbind if
present, and a suitable value for the "enterpriseId" parameter MAY be
extracted from the snmpTrapOID varbind.
3.3. MSG Data
The MSG part of the SYSLOG message is optional and may contain a
free-form message that provides a textual description of the SNMP
event notification. According to [RFC 5424], the character set used
in MSG SHOULD be Unicode, encoded using UTF-8 as specified in
[RFC 3629]. If the originator cannot encode the MSG in Unicode, it
Marinov & Schoenwaelder Standards Track PAGE 9
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
MAY use any other encoding. The originator MAY use the "language"
parameters defined in [RFC 5424] to convey information about the
natural language used inside MSG.
4. Relationship to the SYSLOG-MSG-MIB
A companion document [RFC 5676] defines an SNMP MIB module to
represent SYSLOG messages and to send SYSLOG messages as SNMP
notifications to SNMP notification receivers. This section discusses
the possibilities of using both specifications in combination.
A SYSLOG collector implementing the SYSLOG-MSG-MIB module and the
mapping of SNMP notifications to SYSLOG messages may be configured to
translate received SYSLOG messages containing SNMP notifications back
into the original SNMP notification. In this case, the relevant
tables of the SYSLOG-MSG-MIB will not be populated for SYSLOG
messages carrying SNMP notifications. This configuration allows
operators to build a forwarding chain where SNMP notifications are
"tunneled" through SYSLOG messages. Due to size restrictions of the
SYSLOG transports and the more verbose textual encoding used by
SYSLOG, there is a possibility that SNMP notification content will
get truncated when tunneled through SYSLOG, and thus the resulting
SNMP notification may be incomplete.
An SNMP management application supporting the SYSLOG-MSG-MIB and the
mapping of SNMP notifications to SYSLOG messages may process
information from the SYSLOG-MSG-MIB in order to emit a SYSLOG message
representing the SYSLOG message recorded in the SYSLOG-MSG-MIB
module. This configuration allows operators to build a forwarding
chain where SYSLOG messages are "tunneled" through SNMP messages. A
notification receiver can determine whether a syslogMsgNotification
contained all structured data element parameters of a SYSLOG message.
In case parameters are missing, a forwarding application MUST
retrieve the missing parameters from the SYSLOG-MSG-MIB. Regular
polling of the SYSLOG-MSG-MIB can be used to take care of any lost
SNMP notifications.
5. Usage Example
Here we provide an example of how an SNMP linkUp trap message is
mapped into a SYSLOG message by using the mappings defined in
Section 3.1 and Section 3.2.
The linkUp notification is defined in [RFC 2863] as follows:
linkUp NOTIFICATION-TYPE
OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
STATUS current
Marinov & Schoenwaelder Standards Track PAGE 10
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
DESCRIPTION
"A linkUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for
one of its communication links left the down state and
transitioned into some other state (but not into the
notPresent state). This other state is indicated by the
included value of ifOperStatus."
::= { snmpTraps 4 }
The scopedPDU portion of an SNMP linkUp trap sent using the SNMPv3
message format is shown below (the left column shows the Basic
Encoding Rules (BER) encoding, while the right column indicates the
corresponding ASN.1 definitions):
30:7C SEQUENCE {
04:08:80:00:02:B8:04:61:62:63 800002b804616263
04:04:63:74:78:31 "ctx1"
A7:6A SNMPv2-Trap-PDU {
02:03:6D:08:67 INTEGER 7145575
02:01:00 INTEGER 0
02:01:00 INTEGER 0
30:5D SEQUENCE OF {
30:0F SEQUENCE {
06:08:2B:06:01:02:01:01:03:00 sysUpTime.0
43:03:01:72:8C 94860 }
30:17 SEQUENCE {
06:0A:2B:06:01:06:03:01:01:04:01:00 snmpTrapOID.0
06:09:2B:06:01:06:03:01:01:05:04 linkUp }
30:0F SEQUENCE {
06:0A:2B:06:01:02:01:02:02:01:01:03 ifIndex.3
02:01:03 3 }
30:0F SEQUENCE {
06:0A:2B:06:01:02:01:02:02:01:07:03 ifAdminStatus.3
02:01:01 up(1) }
30:0F SEQUENCE {
06:0A:2B:06:01:02:01:02:02:01:08:03 ifOperStatus.3
02:01:01 up(1) } } } }
The corresponding SYSLOG message generated by the SNMP-to-SYSLOG
translator is shown below. (SYSLOG examples should be considered to
be on one line. They are wrapped on multiple lines in this document
for readability purposes only.)
<29>1 2003-10-11T22:14:15.003Z mymachine.example.com snmptrapd - ID47
[snmp ctxEngine="800002b804616263" ctxName="ctx1"
v1="1.3.6.1.2.1.1.3.0" l1="sysUpTime.0" d1="94860"
v2="1.3.6.1.6.3.1.1.4.1.0" l2="snmpTrapOID.0"
o2="1.3.6.1.6.3.1.1.5.4" a2="linkUp"
Marinov & Schoenwaelder Standards Track PAGE 11
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
v3="1.3.6.1.2.1.2.2.1.1.3" d3="3"
v4="1.3.6.1.2.1.2.2.1.7.3" d4="1" a4="up"
v5="1.3.6.1.2.1.2.2.1.8.3" d5="1" a5="up"]
The corresponding SYSLOG message has a priority value of 29, which
means a facility level of 3 (system daemons) and a severity level of
5 (Notice: normal but significant condition) according to the
algorithm for calculation of priority value specified in Section
6.2.1 of [RFC 5424]. The rest of the fields in the header of the
SYSLOG message are parameters that are specific to the system running
the SNMP-to-SYSLOG translator. The SYSLOG version is 1 and the
message was generated at 22:14:15.003Z on 2003-10-11T by the host
"mymachine.example.com". The application on the SNMP-to-SYSLOG
translator that generated the message was "snmptrapd"; there is no
information about the process id, and the message on the SNMP-to-
SYSLOG system is identified with the MSGID of ID47.
The SYSLOG message contains one structured data element with an SD-ID
of "snmp", which means that this is the scopedPDU portion of an SNMP
event notification message. The data that is contained in the
notification is associated with the ContextEngineID "123456" and
ContextName "ctx1". The request-id of the SNMP notification message
was "7145575". Then follows the data portion of the scopedPDU. The
first two variables contained in the data portion are always the
sysUpTime.0 and snmpTrapOID.0. An snmpTrapOID.0 with a value of
"1.3.6.1.6.3.1.1.5.4" means that this is a linkUp trap. The
parameters v3="1.3.6.1.2.1.2.2.1.1.3" d3="3" mean that the SNMP
notification message is carrying the ifIndex object, which has a type
INTEGER and a value of 3. The parameters v4="1.3.6.1.2.1.2.2.1.7.3"
d4="1" mean that the SNMP notification message is carrying the object
ifAdminStatus, which has a type INTEGER and a value of 1. The
parameters v5="1.3.6.1.2.1.2.2.1.8.3" d5="1" mean that the SNMP
notification message is carrying the object ifOperStatus, which has a
type INTEGER and a value of "1".
6. IANA Considerations
IANA registered the SD-ID value "snmp" together with the PARAM-NAME
values specified in Section 3.2 in the registry for SYSLOG Structured
Data ID Values according to Section 9 in [RFC 5424]. The notation <N>
indicates a position number.
SD-ID PARAM-NAME
snmp OPTIONAL
ctxEngine OPTIONAL
ctxName OPTIONAL
v<N> OPTIONAL
l<N> OPTIONAL
Marinov & Schoenwaelder Standards Track PAGE 12
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
o<N> OPTIONAL
x<N> OPTIONAL
c<N> OPTIONAL
C<N> OPTIONAL
u<N> OPTIONAL
d<N> OPTIONAL
i<N> OPTIONAL
n<N> OPTIONAL
p<N> OPTIONAL
t<N> OPTIONAL
a<N> OPTIONAL
7. Security Considerations
The security considerations discussed in [RFC 5424] apply to this
document.
The SNMP architecture supports an access control mechanism, ensuring
that SNMP notifications are only sent to receivers who are authorized
to receive the notification. Network operators using this mapping of
SNMP notifications to SYSLOG messages should enforce a consistent
policy, preventing people from accessing SNMP notifications via the
SYSLOG mapping that would otherwise not be accessible.
8. Acknowledgments
The editors wish to thank the following individuals for providing
helpful comments on various versions of this document: Martin
Bjorklund, Washam Fan, Rainer Gerhards, Tom Petch, and Dan Romascanu.
9. References
9.1. Normative References
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC 3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
December 2002.
[RFC 3412] Case, J., Harrington, D., Presuhn, R., and B. Wijnen,
"Message Processing and Dispatching for the Simple Network
Management Protocol (SNMP)", STD 62, RFC 3412,
December 2002.
Marinov & Schoenwaelder Standards Track PAGE 13
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
[RFC 3413] Levi, D., Meyer, P., and B. Stewart, "Simple Network
Management Protocol (SNMP) Applications", STD 62,
RFC 3413, December 2002.
[RFC 3416] Presuhn, R., "Version 2 of the Protocol Operations for the
Simple Network Management Protocol (SNMP)", STD 62,
RFC 3416, December 2002.
[RFC 3418] Presuhn, R., "Management Information Base (MIB) for the
Simple Network Management Protocol (SNMP)", STD 62,
RFC 3418, December 2002.
[RFC 3584] Frye, R., Levi, D., Routhier, S., and B. Wijnen,
"Coexistence between Version 1, Version 2, and Version 3
of the Internet-standard Network Management Framework",
BCP 74, RFC 3584, August 2003.
[RFC 3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
[RFC 5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", RFC 5234, January 2008.
[RFC 5424] Gerhards, R., "The Syslog Protocol", RFC 5424, March 2009.
[RFC 5676] Schoenwaelder, J., Clemm, A., and A. Karmakar,
"Definitions of Managed Objects for Mapping SYSLOG
Messages to Simple Network Management Protocol (SNMP)
Notifications", RFC 5676, October 2009.
9.2. Informative References
[RFC 2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Structure of Management Information Version 2 (SMIv2)",
RFC 2578, STD 58, April 1999.
[RFC 2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, June 2000.
[RFC 3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
Marinov & Schoenwaelder Standards Track PAGE 14
RFC 5675 Mapping SNMP Notifications to SYSLOG October 2009
Authors' Addresses
Vladislav Marinov
Jacobs University Bremen
Campus Ring 1
28725 Bremen
Germany
EMail: v.marinov@jacobs-university.de
Juergen Schoenwaelder
Jacobs University Bremen
Campus Ring 1
28725 Bremen
Germany
EMail: j.schoenwaelder@jacobs-university.de
Marinov & Schoenwaelder Standards Track PAGE 15
Mapping Simple Network Management Protocol (SNMP) Notifications to SYSLOG Messages
RFC TOTAL SIZE: 34379 bytes
PUBLICATION DATE: Monday, October 19th, 2009
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
