|
|
|
|
|
|
IETF RFC 5630
The Use of the SIPS URI Scheme in the Session Initiation Protocol (SIP)
Last modified on Thursday, October 22nd, 2009
 Permanent link to RFC 5630
 Search GitHub Wiki for RFC 5630
 Show other RFCs mentioning RFC 5630
Network Working Group F. Audet
Request for Comments: 5630 Skype Labs
Updates: 3261, 3608 October 2009
Category: Standards Track
The Use of the SIPS URI Scheme in the Session Initiation Protocol (SIP)
 Abstract
This document provides clarifications and guidelines concerning the
use of the SIPS URI scheme in the Session Initiation Protocol (SIP).
It also makes normative changes to SIP.
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright and License Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Audet Standards Track PAGE 1 
RFC 5630 SIPS October 2009
Table of Contents
1. Introduction ....................................................3
2. Terminology .....................................................3
3. Background ......................................................3
3.1. Models for Using TLS in SIP ................................3
3.1.1. Server-Provided Certificate .........................3
3.1.2. Mutual Authentication ...............................4
3.1.3. Using TLS with SIP Instead of SIPS ..................4
3.1.4. Usage of the transport=tls URI Parameter and
the TLS Via Parameter ...............................5
3.2. Detection of Hop-by-Hop Security ...........................6
3.3. The Problems with the Meaning of SIPS in RFC 3261 ..........7
4. Overview of Operations ..........................................9
4.1. Routing ...................................................11
5. Normative Requirements .........................................13
5.1. General User Agent Behavior ...............................13
5.1.1. UAC Behavior .......................................13
5.1.1.1. Registration ..............................14
5.1.1.2. SIPS in a Dialog ..........................15
5.1.1.3. Derived Dialogs and Transactions ..........15
5.1.1.4. GRUU ......................................16
5.1.2. UAS Behavior .......................................17
5.2. Registrar Behavior ........................................18
5.2.1. GRUU ...............................................18
5.3. Proxy Behavior ............................................18
5.4. Redirect Server Behavior ..................................20
6. Call Flows .....................................................21
6.1. Bob Registers His Contacts ................................22
6.2. Alice Calls Bob's SIPS AOR ................................27
6.3. Alice Calls Bob's SIP AOR Using TCP .......................36
6.4. Alice Calls Bob's SIP AOR Using TLS .......................50
7. Further Considerations .........................................51
8. Security Considerations ........................................52
9. IANA Considerations ............................................52
10. Acknowledgments ...............................................52
11. References ....................................................53
11.1. Normative References .....................................53
11.2. Informative References ...................................53
Appendix A. Bug Fixes for RFC 3261 ..............................55
Audet Standards Track PAGE 2
RFC 5630 SIPS October 2009
1. Introduction
The meaning and usage of the SIPS URI scheme and of Transport Layer
Security (TLS) [RFC 5246] are underspecified in SIP [RFC 3261] and have
been a source of confusion for implementers.
This document provides clarifications and guidelines concerning the
use of the SIPS URI scheme in the Session Initiation Protocol (SIP).
It also makes normative changes to SIP (including both [RFC 3261] and
[RFC 3608].
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC 2119].
3. Background
3.1. Models for Using TLS in SIP
This section describes briefly the usage of TLS in SIP.
3.1.1. Server-Provided Certificate
In this model, only the TLS server provides a certificate during the
TLS handshake. This is applicable only between a user agent (UA) and
a proxy, where the UA is the TLS client and the proxy is the TLS
server, and hence the UA uses TLS to authenticate the proxy but the
proxy does not use TLS to authenticate the UA. If the proxy needs to
authenticate the UA, this can be achieved by SIP HTTP digest
authentication. This directionality implies that the TLS connection
always needs to be set up by the UA (e.g., during the registration
phase). Since SIP allows for requests in both directions (e.g., an
incoming call), the UA is expected to keep the TLS connection alive,
and that connection is expected to be reused for both incoming and
outgoing requests.
This solution of having the UA always initiate and keep alive the
connection also solves the Network Address Translation (NAT) and
firewall problem as it ensures that responses and further requests
will always be deliverable on the existing connection.
[RFC 5626] provides the mechanism for initiating and maintaining
outbound connections in a standard interoperable way.
Audet Standards Track PAGE 3
RFC 5630 SIPS October 2009
3.1.2. Mutual Authentication
In this model, both the TLS client and the TLS server provide a
certificate in the TLS handshake phase. When used between a UA and a
proxy (or between two UAs), this implies that a UA is in possession
of a certificate. When sending a SIP request when there is not
already a suitable TLS connection in place, a user agent client (UAC)
takes on the role of TLS client in establishing a new TLS connection.
When establishing a TLS connection for receipt of a SIP request, a
user agent server (UAS) takes on the role of TLS server. Because in
SIP a UA or a proxy acts both as UAC and UAS depending on if it is
sending or receiving requests, the symmetrical nature of mutual TLS
is very convenient. This allows for TLS connections to be set up or
torn down at will and does not rely on keeping the TLS connection
alive for further requests.
However, there are some significant limitations.
The first obvious limitation is not with mutual authentication per
se, but with the model where the underlying TCP connection can be
established by either side, interchangeably, which is not possible in
many environments. For examples, NATs and firewalls will often allow
TCP connections to be established in one direction only. This
includes most residential SIP deployments, for example. Mutual
authentication can be used in those environments, but only if the
connection is always started by the same side, for example, by using
[RFC 5626] as described in Section 3.1.1. Having to rely on [RFC 5626]
in this case negates many of the advantages of mutual authentication.
The second significant limitation is that mutual authentication
requires both sides to exchange a certificate. This has proven to be
impractical in many environments, in particular for SIP UAs, because
of the difficulties of setting up a certificate infrastructure for a
wide population of users.
For these reasons, mutual authentication is mostly used in server-to-
server communications (e.g., between SIP proxies, or between proxies
and gateways or media servers), and in environments where using
certificates on both sides is possible (e.g., high-security devices
used within an enterprise).
3.1.3. Using TLS with SIP Instead of SIPS
Because a SIPS URI implies that requests sent to the resource
identified by it be sent over each SIP hop over TLS, SIPS URIs are
not suitable for "best-effort TLS": they are only suitable for "TLS-
only" requests. This is recognized in Section 26.2.2 of [RFC 3261].
Audet Standards Track PAGE 4
RFC 5630 SIPS October 2009
Users that distribute a SIPS URI as an address-of-record may elect
to operate devices that refuse requests over insecure transports.
If one wants to use "best-effort TLS" for SIP, one just needs to use
a SIP URI, and send the request over TLS.
Using SIP over TLS is very simple. A UA opens a TLS connection and
uses SIP URIs instead of SIPS URIs for all the header fields in a SIP
message (From, To, Request-URI, Contact header field, Route, etc.).
When TLS is used, the Via header field indicates TLS.
[RFC 3261], Section 26.3.2.1, states:
When a UA comes online and registers with its local administrative
domain, it SHOULD establish a TLS connection with its registrar
(...). Once the registration has been accepted by the registrar,
the UA SHOULD leave this TLS connection open provided that the
registrar also acts as the proxy server to which requests are sent
for users in this administrative domain. The existing TLS
connection will be reused to deliver incoming requests to the UA
that had just completed registration.
[RFC 5626] describes how to establish and maintain a TLS connection in
environments where it can only be initiated by the UA.
Similarly, proxies can forward requests using TLS if they can open a
TLS connection, even if the route set used SIP URIs instead of SIPS
URIs. The proxies can insert Record-Route header fields using SIP
URIs even if it uses TLS transport. [RFC 3261], Section 26.3.2.2,
explains how interdomain requests can use TLS.
Some user agents, redirect servers, and proxies might have local
policies that enforce TLS on all connections, independently of
whether or not SIPS is used.
3.1.4. Usage of the transport=tls URI Parameter and the TLS Via
Parameter
[RFC 3261], Section 26.2.2 deprecated the "transport=tls" URI
transport parameter in SIPS or SIP URIs:
Note that in the SIPS URI scheme, transport is independent of TLS,
and thus "sips:alice@atlanta.com;transport=TCP" and
"sips:alice@atlanta.com;transport=sctp" are both valid (although
note that UDP is not a valid transport for SIPS). The use of
"transport=tls" has consequently been deprecated, partly because
it was specific to a single hop of the request. This is a change
since RFC 2543.
Audet Standards Track PAGE 5
RFC 5630 SIPS October 2009
The "tls" parameter has not been eliminated from the ABNF in
[RFC 3261], Section 25, since the parameter needs to remain in the
ABNF for backward compatibility in order for parsers to be able to
process the parameter correctly. The transport=tls parameter has
never been defined in an RFC, but only in some of the Internet drafts
between [RFC 2543] and [RFC 3261].
This specification does not make use of the transport=tls parameter.
The reinstatement of the transport=tls parameter, or an alternative
mechanism for indicating the use of the TLS on a single hop in a URI,
is outside the scope of this specification.
For Via header fields, the following transport protocols are defined
in [RFC 3261]: "UDP", "TCP", "TLS", "SCTP", and in [RFC 4168]: "TLS-
SCTP".
3.2. Detection of Hop-by-Hop Security
The presence of a SIPS Request-URI does not necessarily indicate that
the request was sent securely on each hop. So how does a UAS know if
SIPS was used for the entire request path to secure the request end-
to-end? Effectively, the UAS cannot know for sure. However,
[RFC 3261], Section 26.4.4, recommends how a UAS can make some checks
to validate the security. Additionally, the History-Info header
field [RFC 4244] could be inspected for detecting retargeting from SIP
and SIPS. Retargeting from SIP to SIPS by a proxy is an issue
because it can leave the receiver of the request with the impression
that the request was delivered securely on each hop, while in fact,
it was not.
To emphasize, all the checking can be circumvented by any proxies or
back-to-back user agents (B2BUAs) on the path that do not follow the
rules and recommendations of this specification and of [RFC 3261].
Proxies can have their own policies regarding routing of requests to
SIP or SIPS URIs. For example, some proxies in some environments can
be configured to only route SIPS URIs. Some proxies can be
configured to detect non-compliances and reject unsecure requests.
For example, proxies could inspect Request-URIs, Path, Record-Route,
To, From, Contact header fields, and Via header fields to enforce
SIPS.
[RFC 3261], Section 26.4.4, explains that S/MIME can also be used by
the originating UAC to ensure that the original form of the To header
field is carried end-to-end. While not specifically mentioned in
[RFC 3261], Section 26.4.4, this is meant to imply that [RFC 3893]
would be used to "tunnel" important header fields (such as To and
Audet Standards Track PAGE 6
RFC 5630 SIPS October 2009
From) in an encrypted and signed S/MIME body, replicating the
information in the SIP message, and allowing the UAS to validate the
content of those important header fields. While this approach is
certainly legal, a preferable approach is to use the SIP Identity
mechanism defined in [RFC 4474]. SIP Identity creates a signed
identity digest, which includes, among other things, the Address of
Record (AOR) of the sender (from the From header field) and the AOR
of the original target (from the To header field).
3.3. The Problems with the Meaning of SIPS in RFC 3261
[RFC 3261], Section 19.1, describes a SIPS URI as follows:
A SIPS URI specifies that the resource be contacted securely.
This means, in particular, that TLS is to be used between the UAC
and the domain that owns the URI. From there, secure
communications are used to reach the user, where the specific
security mechanism depends on the policy of the domain.
Section 26.2.2 re-iterates it, with regards to Request-URIs:
When used as the Request-URI of a request, the SIPS scheme
signifies that each hop over which the request is forwarded, until
the request reaches the SIP entity responsible for the domain
portion of the Request-URI, must be secured with TLS; once it
reaches the domain in question it is handled in accordance with
local security and routing policy, quite possibly using TLS for
any last hop to a UAS. When used by the originator of a request
(as would be the case if they employed a SIPS URI as the address-
of-record of the target), SIPS dictates that the entire request
path to the target domain be so secured.
Let's take the classic SIP trapezoid to explain the meaning of a
sips:b@B URI. Instead of using real domain names like example.com
and example.net, logical names like "A" and "B" are used, for
clarity.
Audet Standards Track PAGE 7
RFC 5630 SIPS October 2009
.......................... ...........................
. . . .
. +-------+ . . +-------+ .
. | | . . | | .
. | Proxy |-----TLS---- | Proxy | .
. | A | . . | B | .
. | | . . | | .
. / +-------+ . . +-------+ \ .
. / . . \ .
. / . . \ .
. TLS . . Policy-based .
. / . . \ .
. / . . \ .
. / . . \ .
. +-------+ . . +-------+ .
. | | . . | | .
. | UAC a | . . | UAS b | .
. | | . . | | .
. +-------+ . . +-------+ .
. Domain A . . Domain B .
.......................... ...........................
SIP trapezoid with last-hop exception
According to [RFC 3261], if a@A is sending a request to sips:b@B, the
following applies:
o TLS is required between UA a@A and Proxy A
o TLS is required between Proxy A and Proxy B
o TLS is required between Proxy B and UA b@B, depending on local
policy.
One can then wonder why TLS is mandatory between UA a@A and Proxy A
but not between Proxy B and UA b@B. The main reason is that
[RFC 3261] was written before [RFC 5626]. At that time, it was
recognized that in many practical deployments, Proxy B might not be
able to establish a TLS connection with UA b because only Proxy B
would have a certificate to provide and UA b would not. Since UA b
would be the TLS server, it would then not be able to accept the
incoming TLS connection. The consequence is that an [RFC 3261]-
compliant UAS b, while it might not need to support TLS for incoming
requests, will nevertheless have to support TLS for outgoing requests
as it takes the UAC role. Contrary to what many believed
erroneously, the last-hop exception was not created to allow for
using a SIPS URI to address a UAS that does not support TLS: the
last-hop exception was an attempt to allow for incoming requests to
Audet Standards Track PAGE 8
RFC 5630 SIPS October 2009
not be transported over TLS when a SIPS URI is used, and it does not
apply to outgoing requests. The rationale for this was somewhat
flawed, and since then, [RFC 5626] has provided a more satisfactory
solution to this problem. [RFC 5626] also solves the problem that if
UA b is behind a NAT or firewall, Proxy B would not even be able to
establish a TCP session in the first place.
Furthermore, consider the problem of using SIPS inside a dialog. If
a@A sends a request to b@B using a SIPS Request-URI, then, according
to [RFC 3261], Section 8.1.1.8, "the Contact header field MUST contain
a SIPS URI as well". This means that b@B, upon sending a new Request
within the dialog (e.g., a BYE or re-INVITE), will have to use a SIPS
URI. If there is no Record-Route entry, or if the last Record-Route
entry consists of a SIPS URI, this implies that b@B is expected to
understand SIPS in the first place, and is required to also support
TLS. If the last Record-Route entry however is a sip URI, then b
would be able to send requests without using TLS (but b would still
have to be able to handle SIPS schemes when parsing the message). In
either case, the Request-URI in the request from b@B to B would be a
SIPS URI.
4. Overview of Operations
Because of all the problems described in Section 3.3, this
specification deprecates the last-hop exception when forwarding a
request to the last hop (see Section 5.3). This will ensure that TLS
is used on all hops all the way up to the remote target.
Audet Standards Track PAGE 9
RFC 5630 SIPS October 2009
.......................... ...........................
. . . .
. +-------+ . . +-------+ .
. | | . . | | .
. | Proxy |-----TLS---- | Proxy | .
. | A | . . | B | .
. | | . . | | .
. / +-------+ . . +-------+ \ .
. / . . \ .
. / . . \ .
. TLS . . TLS .
. / . . \ .
. / . . \ .
. / . . \ .
. +-------+ . . +-------+ .
. | | . . | | .
. | UAC a | . . | UAS b | .
. | | . . | | .
. +-------+ . . +-------+ .
. Domain A . . Domain B .
.......................... ...........................
SIP trapezoid without last-hop exception
The SIPS scheme implies transitive trust. Obviously, there is
nothing that prevents proxies from cheating (see [RFC 3261], Section
26.4.4). While SIPS is useful to request that a resource be
contacted securely, it is not useful as an indication that a resource
was in fact contacted securely. Therefore, it is not appropriate to
infer that because an incoming request had a Request-URI (or even a
To header field) containing a SIPS URI, that it necessarily
guarantees that the request was in fact transmitted securely on each
hop. Some have been tempted to believe that the SIPS scheme was
equivalent to an HTTPS scheme in the sense that one could provide a
visual indication to a user (e.g., a padlock icon) to the effect that
the session is secured. This is obviously not the case, and
therefore the meaning of a SIPS URI is not to be oversold. There is
currently no mechanism to provide an indication of end-to-end
security for SIP. Other mechanisms can provide a more concrete
indication of some level of security. For example, SIP Identity
[RFC 4474] provides an authenticated identity mechanism and a domain-
to-domain integrity protection mechanism.
Some have asked why is SIPS useful in a global open environment such
as the Internet, if (when used in a Request-URI) it is not an
absolute guarantee that the request will in fact be delivered over
TLS on each hop? Why is SIPS any different from just using TLS
transport with SIP? The difference is that using a SIPS URI in a
Audet Standards Track PAGE 10
RFC 5630 SIPS October 2009
Request-URI means that if you are instructing the network to use TLS
over each hop and if it is not possible to reject the request, you
would rather have the request fail than have the request delivered
without TLS. Just using TLS with a SIP Request-URI instead of a SIPS
Request-URI implies a "best-effort" service: the request can but need
not be delivered over TLS on each hop.
Another common question is why not have a Proxy-Require and Require
option tag forcing the use of TLS instead? The answer is that it
would only be functionally equivalent to using SIPS in a Request-URI.
SIPS URIs however can be used in many other header fields: in Contact
for registration, Contact in dialog-creating requests, Route, Record-
Route, Path, From, To, Refer-To, Referred-By, etc. SIPS URIs can
also be used in human-usable format (e.g., business cards, user
interface). SIPS URIs can even be used in other protocols or
document formats that allow for including SIPS URIs (e.g., HTML).
This document specifies that SIPS means that the SIP resource
designated by the target SIPS URI is to be contacted securely, using
TLS on each hop between the UAC and the remote UAS (as opposed to
only to the proxy responsible for the target domain of the Request-
URI). It is outside of the scope of this document to specify what
happens when a SIPS URI identifies a UAS resource that "maps" outside
the SIP network, for example, to other networks such as the Public
Switched Telephone Network (PSTN).
4.1. Routing
SIP and SIPS URIs that are identical except for the scheme itself
(e.g., sip:alice@example.com and sips:alice@example.com) refer to the
same resource. This requirement is implicit in [RFC 3261], Section
19.1, which states that "any resource described by a SIP URI can be
'upgraded' to a SIPS URI by just changing the scheme, if it is
desired to communicate with that resource securely". This does not
mean that the SIPS URI will necessarily be reachable, in particular,
if the proxy cannot establish a secure connection to a client or
another proxy. This does not suggest either that proxies would
arbitrarily "upgrade" SIP URIs to SIPS URIs when forwarding a request
(see Section 5.3). Rather, it means that when a resource is
addressable with SIP, it will also be addressable with SIPS.
For example, consider the case of a UA that has registered with a
SIPS Contact header field. If a UAC later addresses a request using
a SIP Request-URI, the proxy will forward the request addressed to a
SIP Request-URI to the UAS, as illustrated by message F13 in Sections
6.3 and in 6.4. The proxy forwards the request to the UA using a SIP
Request-URI and not the SIPS Request-URI used in registration. The
proxy does this by replacing the SIPS scheme that was used in the
Audet Standards Track PAGE 11
RFC 5630 SIPS October 2009
registered Contact header field binding with a SIP scheme while
leaving the rest of the URI as is, and then by using this new URI as
the Request-URI. If the proxy did not do this, and instead used a
SIPS Request-URI, then the response (e.g., a 200 to an INVITE) would
have to include a SIPS Contact header field. That SIPS Contact
header field would then force the other UA to use a SIPS Contact
header field in any mid-dialog request, including the ACK (which
would not be possible if that UA did not support SIPS).
This specification mandates that when a proxy is forwarding a
request, a resource described by a SIPS Request-URI cannot be
"downgraded" to a SIP URI by changing the scheme, or by sending the
associated request over a nonsecure link. If a request needs to be
rejected because otherwise it would be a "downgrade", the request
would be rejected with a 480 (Temporarily Unavailable) response
(potentially with a Warning header with warn-code 380 "SIPS Not
Allowed"). Similarly, this specification mandates that when a proxy
is forwarding a request, a resource described by a SIP Request-URI
cannot be "upgraded" to a SIPS URI by changing the scheme (otherwise
it would be an "upgrade" only for that hop onwards rather than on all
hops, and would therefore mislead the UAS). If a request needs to be
rejected because otherwise it would be a misleading "upgrade", the
request would be rejected with a 480 (Temporarily Unavailable)
response (potentially with a Warning header field with warn-code 381
"SIPS Required"). See Section 5.3 for more details.
For example, the sip:bob@example.com and sips:bob@example.com AORs
refer to the same user "Bob" in the domain "example.com": the first
URI is the SIP version, and the second one is the SIPS version. From
the point of view of routing, requests to either sip:bob@example.com
or sips:bob@example.com are treated the same way. When Bob
registers, it therefore does not really matter if he is using a SIP
or a SIPS AOR, since they both refer to the same user. At first
glance, Section 19.1.4 of [RFC 3261] seems to contradict this idea by
stating that a SIP and a SIPS URI are never equivalent.
Specifically, it says that they are never equivalent for the purpose
of comparing bindings in Contact header field URIs in REGISTER
requests. The key point is that this statement applies to the
Contact header field bindings in a registration: it is the
association of the Contact header field with the AOR that will
determine whether or not the user is reachable with a SIPS URI.
Consider this example: if Bob (AOR bob@example.com) registers with a
SIPS Contact header field (e.g., sips:bob@bobphone.example.com), the
registrar and the location service then know that Bob is reachable at
sips:bob@bobphone.example.com and at sip:bob@bobphone.example.com.
Audet Standards Track PAGE 12
RFC 5630 SIPS October 2009
If a request is sent to AOR sips:bob@example.com, Bob's proxy will
route it to Bob at Request-URI sips:bob@bobphone.example.com. If a
request is sent to AOR sip:bob@example.com, Bob's proxy will route it
to Bob at Request-URI sip:bob@bobphone.example.com.
If Bob wants to ensure that every request delivered to him always be
transported over TLS, Bob can use [RFC 5626] when registering.
However, if Bob had registered with a SIP Contact header field
instead of a SIPS Contact header field (e.g.,
sip:bob@bobphone.example.com), then a request to AOR
sips:bob@example.com would not be routed to Bob, since there is no
SIPS Contact header field for Bob, and "downgrades" from SIPS to SIP
are not allowed.
See Section 6 for illustrative call flows.
5. Normative Requirements
This section describes all the normative requirements defined by this
specification.
5.1. General User Agent Behavior
5.1.1. UAC Behavior
When presented with a SIPS URI, a UAC MUST NOT change it to a SIP
URI. For example, if a directory entry includes a SIPS AOR, the UAC
is not expected to send requests to that AOR using a SIP Request-URI.
Similarly, if a user reads a business card with a SIPS URI, it is not
possible to infer a SIP URI. If a 3XX response includes a SIPS
Contact header field, the UAC does not replace it with a SIP Request-
URI (e.g., by replacing the SIPS scheme with a SIP scheme) when
sending a request as a result of the redirection.
As mandated by [RFC 3261], Section 8.1.1.8, in a request, "if the
Request-URI or top Route header field value contains a SIPS URI, the
Contact header field MUST contain a SIPS URI as well".
Upon receiving a 416 response or a 480 (Temporarily Unavailable)
response with a Warning header with warn-code 380 "SIPS Not Allowed",
a UAC MUST NOT re-attempt the request by automatically replacing the
SIPS scheme with a SIP scheme as described in [RFC 3261], Section
8.1.3.5, as it would be a security vulnerability. If the UAC does
re-attempt the call with a SIP URI, the UAC SHOULD get a confirmation
from the user to authorize re-initiating the session with a SIP
Request-URI instead of a SIPS Request-URI.
Audet Standards Track PAGE 13
RFC 5630 SIPS October 2009
When the route set is not empty (e.g., when a service route [RFC 3608]
is returned by the registrar), it is the responsibility of the UAC to
use a Route header field consisting of all SIPS URIs when using a
SIPS Request-URI. Specifically, if the route set included any SIP
URI, the UAC MUST change the SIP URIs to SIPS URIs simply by changing
the scheme from "sip" to "sips" before sending the request. This
allows for configuring or discovering one service route with all SIP
URIs and allowing sending requests to both SIP and SIPS URIs.
When the UAC is using a SIP Request-URI, if the route set is not
empty and the topmost Route header field entry is a SIPS URI with the
lr parameter, the UAC MUST send the request over TLS (using a SIP
Request-URI). If the route is not empty and the Route header field
entry is a SIPS URI without the lr parameter, the UAC MUST send the
request over TLS using a SIPS Request-URI corresponding to the
topmost entry in the route set.
To emphasize what is already defined in [RFC 3261], UAs MUST NOT use
the "transport=tls" parameter.
5.1.1.1. Registration
The UAC registers Contacts header fields to either a SIPS or a SIP
AOR.
If a UA wishes to be reachable with a SIPS URI, the UA MUST register
with a SIPS Contact header field. Requests addressed to that UA's
AOR using either a SIP or SIPS Request-URI will be routed to that UA.
This includes UAs that support both SIP and SIPS. This specification
does not provide any SIP-based mechanism for a UA to provision its
proxy to only forward requests using a SIPS Request-URI. A non-SIP
mechanism such as a web interface could be used to provision such a
preference. A SIP mechanism for provisioning such a preference is
outside the scope of this specification.
If a UA does not wish to be reached with a SIPS URI, it MUST register
with a SIP Contact header field.
Because registering with a SIPS Contact header field implies a
binding of both a SIPS Contact and a corresponding SIP Contact to the
AOR, a UA MUST NOT include both the SIPS and the SIP versions of the
same Contact header field in a REGISTER request; the UA MUST only use
the SIPS version in this case. Similarly, a UA SHOULD NOT register
both a SIP Contact header field and a SIPS Contact header field in
separate registrations as the SIP Contact header field would be
superfluous. If it does, the second registration replaces the first
one (e.g., a UA could register first with a SIP Contact header field,
meaning it does not support SIPS, and later register with a SIPS
Audet Standards Track PAGE 14
RFC 5630 SIPS October 2009
Contact header field, meaning it now supports SIPS). Similarly, if a
UA registers first with a SIPS Contact header field and later
registers with a SIP Contact header field, that SIP Contact header
field replaces the SIPS Contact header field.
[RFC 5626] can be used by a UA if it wants to ensure that no requests
are delivered to it without using the TLS connection it used when
registering.
If all the Contact header fields in a REGISTER request are SIPS, the
UAC MUST use SIPS AORs in the From and To header fields in the
REGISTER request. If at least one of the Contact header fields is
not SIPS (e.g., sip, mailto, tel, http, https), the UAC MUST use SIP
AORs in the From and To header fields in the REGISTER request.
To emphasize what is already defined in [RFC 3261], UACs MUST NOT use
the "transport=tls" parameter.
5.1.1.2. SIPS in a Dialog
If the Request-URI in a request that initiates a dialog is a SIP URI,
then the UAC needs to be careful about what to use in the Contact
header field (in case Record-Route is not used for this hop). If the
Contact header field was a SIPS URI, it would mean that the UAS would
only accept mid-dialog requests that are sent over secure transport
on each hop. Since the Request-URI in this case is a SIP URI, it is
quite possible that the UA sending a request to that URI might not be
able to send requests to SIPS URIs. If the top Route header field
does not contain a SIPS URI, the UAC MUST use a SIP URI in the
Contact header field, even if the request is sent over a secure
transport (e.g., the first hop could be re-using a TLS connection to
the proxy as would be the case with [RFC 5626]).
When a target refresh occurs within a dialog (e.g., re-INVITE
request, UPDATE request), the UAC MUST include a Contact header field
with a SIPS URI if the original request used a SIPS Request-URI.
5.1.1.3. Derived Dialogs and Transactions
Sessions, dialogs, and transactions can be "derived" from existing
ones. A good example of a derived dialog is one that was established
as a result of using the REFER method [RFC 3515].
As a general principle, derived dialogs and transactions cannot
result in an effective downgrading of SIPS to SIP, without the
explicit authorization of the entities involved.
Audet Standards Track PAGE 15
RFC 5630 SIPS October 2009
For example, when a REFER request is used to perform a call transfer,
it results in an existing dialog being terminated and another one
being created based on the Refer-To URI. If that initial dialog was
established using SIPS, then the UAC MUST NOT establish a new one
using SIP, unless there is an explicit authorization given by the
recipient of the REFER request. This could be a warning provided to
the user. Having such a warning could be useful, for example, for a
secure directory service application, to warn a user that a request
may be routed to a UA that does not support SIPS.
A REFER request can also be used for referring to resources that do
not result in dialogs being created. In fact, a REFER request can be
used to point to resources that are of a different type than the
original one (i.e., not SIP or SIPS). Please see [RFC 3515], Section
5.2, for security considerations related to this.
Other examples of derived dialogs and transactions include the use of
Third-Party Call Control [RFC 3725], the Replaces header field
[RFC 3891], and the Join header field [RFC 3911]. Again, the general
principle is that these mechanisms SHOULD NOT result in an effective
downgrading of SIPS to SIP, without the proper authorization.
5.1.1.4. GRUU
When a Globally Routable User Agent URI (GRUU) [RFC 5627] is assigned
to an instance ID/AOR pair, both SIP and SIPS GRUUs will be assigned.
When a GRUU is obtained through registration, if the Contact header
field in the REGISTER request contains a SIP URI, the SIP version of
the GRUU is returned. If the Contact header field in the REGISTER
request contains a SIPS URI, the SIPS version of the GRUU is
returned.
If the wrong scheme is received in the GRUU (which would be an error
in the registrar), the UAC SHOULD treat it as if the proper scheme
was used (i.e., it SHOULD replace the scheme with the proper scheme
before using the GRUU).
Audet Standards Track PAGE 16
RFC 5630 SIPS October 2009
5.1.2. UAS Behavior
When presented with a SIPS URI, a UAS MUST NOT change it to a SIP
URI.
As mandated by [RFC 3261], Section 12.1.1:
If the request that initiated the dialog contained a SIPS URI in
the Request-URI or in the top Record-Route header field value, if
there was any, or the Contact header field if there was no Record-
Route header field, the Contact header field in the response MUST
be a SIPS URI.
If a UAS does not wish to be reached with a SIPS URI but only with a
SIP URI, the UAS MUST respond with a 480 (Temporarily Unavailable)
response. The UAS SHOULD include a Warning header with warn-code 380
"SIPS Not Allowed". [RFC 3261], Section 8.2.2.1, states that UASs
that do not support the SIPS URI scheme at all "SHOULD reject the
request with a 416 (Unsupported URI scheme) response".
If a UAS does not wish to be contacted with a SIP URI but instead by
a SIPS URI, it MUST reject a request to a SIP Request-URI with a 480
(Temporarily Unavailable) response. The UAS SHOULD include a Warning
header with warn-code 381 "SIPS Required".
It is a matter of local policy for a UAS to accept incoming requests
addressed to a URI scheme that does not correspond to what it used
for registration. For example, a UA with a policy of "always SIPS"
would address the registrar using a SIPS Request-URI over TLS, would
register with a SIPS Contact header field, and the UAS would reject
requests using the SIP scheme with a 480 (Temporarily Unavailable)
response with a Warning header with warn-code 381 "SIPS Required". A
UA with a policy of "best-effort SIPS" would address the registrar
using a SIPS Request-URI over TLS, would register with a SIPS Contact
header field, and the UAS would accept requests addressed to either
SIP or SIPS Request-URIs. A UA with a policy of "No SIPS" would
address the registrar using a SIP Request-URI, could use TLS or not,
would register with a SIP AOR and a SIP Contact header field, and the
UAS would accept requests addressed to a SIP Request-URI.
If a UAS needs to reject a request because the URIs are used
inconsistently (e.g., the Request-URI is a SIPS URI, but the Contact
header field is a SIP URI), the UAS MUST reject the request with a
400 (Bad Request) response.
When a target refresh occurs within a dialog (e.g., re-INVITE
request, UPDATE request), the UAS MUST include a Contact header field
with a SIPS URI if the original request used a SIPS Request-URI.
Audet Standards Track PAGE 17
RFC 5630 SIPS October 2009
To emphasize what is already defined in [RFC 3261], UASs MUST NOT use
the "transport=tls" parameter.
5.2. Registrar Behavior
The UAC registers Contacts header fields to either a SIPS or a SIP
AOR. From a routing perspective, it does not matter which one is
used for registration as they identify the same resource. The
registrar MUST consider AORs that are identical except for one having
the SIP scheme and the other having the SIPS scheme to be equivalent.
A registrar MUST accept a binding to a SIPS Contact header field only
if all the appropriate URIs are of the SIPS scheme; otherwise, there
could be an inadvertent binding of a secure resource (SIPS) to an
unsecured one (SIP). This includes the Request-URI and the Contacts
and all the Path header fields, but does not include the From and To
header fields. If the URIs are not of the proper SIPS scheme, the
registrar MUST reject the REGISTER with a 400 (Bad Request).
A registrar can return a service route [RFC 3608] and impose some
constraints on whether or not TLS will be mandatory on specific hops.
For example, if the topmost entry in the Path header field returned
by the registrar is a SIPS URI, the registrar is telling the UAC that
TLS is to be used for the first hop, even if the Request-URI is SIP.
If a UA registered with a SIPS Contact header field, the registrar
returning a service route [RFC 3608] MUST return a service route
consisting of SIP URIs if the intent of the registrar is to allow
both SIP and SIPS to be used in requests sent by that client. If a
UA registers with a SIPS Contact header field, the registrar
returning a service route MUST return a service route consisting of
SIPS URIs if the intent of the registrar is to allow only SIPS URIs
to be used in requests sent by that UA.
5.2.1. GRUU
When a GRUU [RFC 5627] is assigned to an instance ID/AOR pair through
registration, the registrar MUST assign both a SIP GRUU and a SIPS
GRUU. If the Contact header field in the REGISTER request contains a
SIP URI, the registrar MUST return the SIP version of the GRUU. If
the Contact header field in the REGISTER request contains a SIPS URI,
the registrar MUST return the SIPS version of the GRUU.
5.3. Proxy Behavior
Proxies MUST NOT use the last-hop exception of [RFC 3261] when
forwarding or retargeting a request to the last hop. Specifically,
when a proxy receives a request with a SIPS Request-URI, the proxy
Audet Standards Track PAGE 18
RFC 5630 SIPS October 2009
MUST only forward or retarget the request to a SIPS Request-URI. If
the target UAS had registered previously using a SIP Contact header
field instead of a SIPS Contact header field, the proxy MUST NOT
forward the request to the URI indicated in the Contact header field.
If the proxy needs to reject the request for that reason, the proxy
MUST reject it with a 480 (Temporarily Unavailable) response. In
this case, the proxy SHOULD include a Warning header with warn-code
380 "SIPS Not Allowed".
Proxies SHOULD transport requests using a SIP URI over TLS when it is
possible to set up a TLS connection, or reuse an existing one.
[RFC 5626], for example, allows for re-using an existing TLS
connection. Some proxies could have policies that prohibit sending
any request over anything but TLS.
When a proxy receives a request with a SIP Request-URI, the proxy
MUST NOT forward the request to a SIPS Request-URI. If the target
UAS had registered previously using a SIPS Contact header field, and
the proxy decides to forward the request, the proxy MUST replace that
SIPS scheme with a SIP scheme while leaving the rest of the URI as
is, and use the resulting URI as the Request-URI of the forwarded
request. The proxy MUST use TLS to forward the request to the UAS.
Some proxies could have a policy of not forwarding at all requests
using a non-SIPS Request-URI if the UAS had registered using a SIPS
Contact header field. If the proxy elects to reject the request
because it has such a policy or because it is not capable of
establishing a TLS connection, the proxy MAY reject it with a 480
(Temporarily Unavailable) response with a Warning header with warn-
code 381 "SIPS Required".
If a proxy needs to reject a request because the URIs are used
inconsistently (e.g., the Request-URI is a SIPS URI, but the Contact
header field is a SIP URI), the proxy SHOULD use response code 400
(Bad Request).
It is RECOMMENDED that the proxy use the outbound proxy procedures
defined in [RFC 5626] for supporting UACs that cannot provide a
certificate for establishing a TLS connection (i.e., when server-side
authentication is used).
When a proxy sends a request using a SIPS Request-URI and receives a
3XX response with a SIP Contact header field, or a 416 response, or a
480 (Temporarily Unavailable) response with a Warning header with
warn-code 380 "SIPS Not Allowed" response, the proxy MUST NOT recurse
on the response. In this case, the proxy SHOULD forward the best
response instead of recursing, in order to allow for the UAC to take
the appropriate action.
Audet Standards Track PAGE 19
RFC 5630 SIPS October 2009
When a proxy sends a request using a SIP Request-URI and receives a
3XX response with a SIPS Contact header field, or a 480 (Temporarily
Unavailable) response with a Warning header with warn-code 381 "SIPS
Required", the proxy MUST NOT recurse on the response. In this case,
the proxy SHOULD forward the best response instead of recursing, in
order to allow for the UAC to take the appropriate action.
To emphasize what is already defined in [RFC 3261], proxies MUST NOT
use the "transport=tls" parameter.
5.4. Redirect Server Behavior
Using a redirect server with TLS instead of using a proxy has some
limitations that have to be taken into account. Since there is no
pre-established connection between the proxy and the UAS (such as
with [RFC 5626]), it is only appropriate for scenarios where inbound
connections are allowed. For example, it could be used in a server-
to-server environment (redirect server or proxy server) where TLS
mutual authentication is used, and where there are no NAT traversal
issues. A redirect server would not be able to redirect to an entity
that does not have a certificate. A redirect server might not be
usable if there is a NAT between the server and the UAS.
When a redirect server receives a request with a SIP Request-URI, the
redirect server MAY redirect with a 3XX response to either a SIP or a
SIPS Contact header field. If the target UAS had registered
previously using a SIPS Contact header field, the redirect server
SHOULD return a SIPS Contact header field if it is in an environment
where TLS is usable (as described in the previous paragraph). If the
target UAS had registered previously using a SIP Contact header
field, the redirect server MUST return a SIP Contact header field in
a 3XX response if it redirects the request.
When a redirect server receives a request with a SIPS Request-URI,
the redirect server MAY redirect with a 3XX response to a SIP or a
SIPS Contact header field. If the target UAS had registered
previously using a SIPS Contact header field, the redirect server
SHOULD return a SIPS Contact header field if it is in an environment
where TLS is usable. If the target UAS had registered previously
using a SIP Contact header field, the redirect server MUST return a
SIP Contact header field in a 3XX response if it chooses to redirect;
otherwise, the UAS MAY reject the request with a 480 (Temporarily
Unavailable) response with a Warning header with warn-code 380 "SIPS
Not Allowed". If a redirect server redirects to a UAS that it has no
knowledge of (e.g., an AOR in a different domain), the Contact header
field could be of any scheme.
Audet Standards Track PAGE 20
RFC 5630 SIPS October 2009
If a redirect server needs to reject a request because the URIs are
used inconsistently (e.g., the Request-URI is a SIPS URI, but the
Contact header field is a SIP URI), the redirect server SHOULD use
response code 400 (Bad Request).
To emphasize what is already defined in [RFC 3261], redirect servers
MUST NOT use the "transport=tls" parameter.
6. Call Flows
The following diagram illustrates the topology used for the examples
in this section:
example.com . example.net
.
|-------------| . |------------|
| Registrar/ |__________| Proxy A |
| Auth. Proxy | . | (proxya) |
| (pb) | . |------------|
|-------------| . |
| . |
| . |
|-----------| . |
| Edge | . |
| Proxy B | . |
| (eb) | . |
|-----------| . |
/ | . |
/ | . |
/ | . |
______ | . |
| | _____ . _____
|______| O / \ O . O / \ O
/_______/ /___\ . /___\
.
bob@bobpc bob@bobphone . alice
Topology
In the following examples, Bob has two clients; one is a SIP PC
client running on his computer, and the other one is a SIP phone.
The PC client does not support SIPS, and consequently only registers
with a SIP Contact header field. The SIP phone however does support
SIPS and TLS, and consequently registers with a SIPS Contact header
field. Both of Bob's devices are going through Edge Proxy B, and
consequently, they include a Route header field indicating
Audet Standards Track PAGE 21
RFC 5630 SIPS October 2009
eb.example.com. Edge Proxy B removes the Route header field
corresponding to itself, and adds itself in a Path header field. The
registration process call flow is illustrated in Section 6.1.
After registration, there are two Contact bindings associated with
Bob's AOR of bob@example.com: sips:bob@bobphone.example.com and
sip:bob@bobpc.example.com.
Alice then calls Bob through her own Proxy A. Proxy A locates Bob's
domain example.com. In this example, that domain is owned by Bob's
Registrar/Authoritative Proxy B. Proxy A removes the Route header
field corresponding to itself, and inserts itself in the Record-Route
and forwards the request to Registrar/Authoritative Proxy B.
The following subsections illustrate registration and three examples.
In the first example (Section 6.2), Alice calls Bob's SIPS AOR. In
the second example (Section 6.3), Alice calls Bob's SIP AOR using TCP
transport. In the third example (Section 6.4), Alice calls Bob's SIP
AOR using TLS transport.
6.1. Bob Registers His Contacts
This flow illustrates the registration process by which Bob's device
registers. His PC client (Bob@bobpc) registers with a SIP scheme,
and his SIP phone (Bob@phone) registers with a SIPS scheme.
Audet Standards Track PAGE 22
RFC 5630 SIPS October 2009
(eb) (pb)
Edge Registrar/
Bob@bobpc Proxy B Auth. Proxy B
| | |
| REGISTER F1 | |
|------------------>| REGISTER F2 |
| |-------------->|
| | 200 F3 |
| 200 F4 |<--------------|
|<------------------| |
| | |
| Bob@bobphone | |
| | | |
| |REGISTER F5 | |
| |----------->| REGISTER F6 |
| | |-------------->|
| | | 200 F7 |
| | 200 F8 |<--------------|
| |<-----------| |
| | | |
Bob Registers His Contacts
Message details
F1 REGISTER Bob's PC Client -> Edge Proxy B
REGISTER sip:pb.example.com SIP/2.0
Via: SIP/2.0/TCP bobpc.example.com:5060;branch=z9hG4bKnashds
Max-Forwards: 70
To: Bob <sip:bob@example.com>
From: Bob <sip:bob@example.com>;tag=456248
Call-ID: 843817637684230@998sdasdh09
CSeq: 1826 REGISTER
Supported: path, outbound
Route: <sip:eb.example.com;lr>
Contact: <sip:bob@bobpc.example.com>
;+sip.instance="<urn:uuid:0C67446E-F1A1-11D9-94D3-000A95A0E128>"
;reg-id=1
Content-Length: 0
Audet Standards Track PAGE 23
RFC 5630 SIPS October 2009
F2 REGISTER Edge Proxy B -> Registrar/Authoritative Proxy B
REGISTER sip:pb.example.com SIP/2.0
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bK87asdks7
Via: SIP/2.0/TCP bobpc.example.com:5060;branch=z9hG4bKnashds
Max-Forwards: 69
To: Bob <sip:bob@example.com>
From: Bob <sip:bob@example.com>;tag=456248
Call-ID: 843817637684230@998sdasdh09
CSeq: 1826 REGISTER
Supported: path, outbound
Path: <sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>
Contact: <sip:bob@bobpc.example.com>
;+sip.instance="<urn:uuid:0C67446E-F1A1-11D9-94D3-000A95A0E128>"
;reg-id=1
Content-Length: 0
F3 200 (REGISTER) Registrar/Authoritative Proxy B -> Edge Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bK87asdks7
Via: SIP/2.0/TCP bobpc.example.com:5060;branch=z9hG4bKnashds
To: Bob <sip:bob@example.com>;tag=2493K59K9
From: Bob <sip:bob@example.com>;tag=456248
Call-ID: 843817637684230@998sdasdh09
CSeq: 1826 REGISTER
Require: outbound
Supported: path, outbound
Path: <sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>
Contact: <sip:bob@bobphone.example.com>
;+sip.instance="<urn:uuid:0C67446E-F1A1-11D9-94D3-000A95A0E128>"
;reg-id=1
;expires=3600
Date: Mon, 12 Jun 2006 16:43:12 GMT
Content-Length: 0
Audet Standards Track PAGE 24
RFC 5630 SIPS October 2009
F4 200 (REGISTER) Edge Proxy B -> Bob's PC Client
SIP/2.0 200 OK
Via: SIP/2.0/TCP bobpc.example.com:5060;branch=z9hG4bKnashds
To: Bob <sip:bob@example.com>;tag=2493K59K9
From: Bob <sip:bob@example.com>;tag=456248
Call-ID: 843817637684230@998sdasdh09
CSeq: 1826 REGISTER
Require: outbound
Supported: path, outbound
Path: <sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>
Contact: <sip:bob@bobphone.example.com>
;+sip.instance="<urn:uuid:0C67446E-F1A1-11D9-94D3-000A95A0E128>"
;reg-id=1
;expires=3600
Date: Thu, 09 Aug 2007 16:43:12 GMT
Content-Length: 0
F5 REGISTER Bob's Phone -> Edge Proxy B
REGISTER sips:pb.example.com SIP/2.0
Via: SIP/2.0/TLS bobphone.example.com:5061;branch=z9hG4bK9555
Max-Forwards: 70
To: Bob <sips:bob@example.com>
From: Bob <sips:bob@example.com>;tag=90210
Call-ID: faif9a@qwefnwdclk
CSeq: 12 REGISTER
Supported: path, outbound
Route: <sips:eb.example.com;lr>
Contact: <sips:bob@bobphone.example.com>
;+sip.instance="<urn:uuid:6F85D4E3-E8AA-46AA-B768-BF39D5912143>"
;reg-id=1
Content-Length: 0
Audet Standards Track PAGE 25
RFC 5630 SIPS October 2009
F6 REGISTER Edge Proxy B -> Registrar/Authoritative Proxy B
REGISTER sips:pb.example.com SIP/2.0
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bK876354
Via: SIP/2.0/TLS bobphone.example.com:5061;branch=z9hG4bK9555
Max-Forwards: 69
To: Bob <sips:bob@example.com>
From: Bob <sips:bob@example.com>;tag=90210
Call-ID: faif9a@qwefnwdclk
CSeq: 12 REGISTER
Supported: path, outbound
Path: <sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Contact: <sips:bob@bobphone.example.com>
;+sip.instance="<urn:uuid:6F85D4E3-E8AA-46AA-B768-BF39D5912143>"
;reg-id=1
Content-Length: 0
F7 200 (REGISTER) Registrar/Authoritative Proxy B -> Edge Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bK876354
Via: SIP/2.0/TLS bobphone.example.com:5061;branch=z9hG4bK9555
To: Bob <sips:bob@example.com>;tag=5150
From: Bob <sips:bob@example.com>;tag=90210
Call-ID: faif9a@qwefnwdclk
CSeq: 12 REGISTER
Require: outbound
Supported: path, outbound
Path: <sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Contact: <sips:bob@bobphone.example.com>
;+sip.instance="<urn:uuid:6F85D4E3-E8AA-46AA-B768-BF39D5912143>"
;reg-id=1
;expires=3600
Date: Thu, 09 Aug 2007 16:43:50 GMT
Content-Length: 0
Audet Standards Track PAGE 26
RFC 5630 SIPS October 2009
F8 200 (REGISTER) Edge Proxy B -> Bob's Phone
SIP/2.0 200 OK
Via: SIP/2.0/TLS bobphone.example.com:5061;branch=z9hG4bK9555
To: Bob <sips:bob@example.com>;tag=5150
From: Bob <sips:bob@example.com>;tag=90210
Call-ID: faif9a@qwefnwdclk
CSeq: 12 REGISTER
Require: outbound
Supported: path, outbound
Path: <sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Contact: <sips:bob@bobphone.example.com>
;+sip.instance="<urn:uuid:6F85D4E3-E8AA-46AA-B768-BF39D5912143>"
;reg-id=1
;expires=3600
Date: Thu, 09 Aug 2007 16:43:50 GMT
Content-Length: 0
6.2. Alice Calls Bob's SIPS AOR
Bob's registration has already occurred as per Section 6.1.
In this first example, Alice calls Bob's SIPS AOR
(sips:bob@example.com). Registrar/Authoritative Proxy B consults the
binding in the registration database, and finds the two Contact
header field bindings. Alice had addressed Bob with a SIPS Request-
URI (sips:bob@example.com), so Registrar/Authoritative Proxy B
determines that the call needs to be routed only to bobphone (which
registered using a SIPS Contact header field), and therefore the
request is only sent to sips:bob@bobphone.example.com, through Edge
Proxy B. Both Registrar/Authoritative Proxy B and Edge Proxy B
insert themselves in the Record-Route. Bob answers at
sips:bob@bobphone.example.com.
Audet Standards Track PAGE 27
RFC 5630 SIPS October 2009
(eb) (pb)
Edge Registrar/
Bob@bobpc Proxy B Auth. Proxy B Proxy A Alice
| | | | |
| | | | INVITE F9 |
| Bob@bobphone | | INVITE F11 |<-----------|
| | | INVITE F13 |<-----------| 100 F10 |
| | INVITE F15 |<-----------| 100 F12 |----------->|
| |<-----------| 100 F14 |----------->| |
| | 180 F16 |----------->| | |
| |----------->| 180 F17 | | |
| | 200 F20 |----------->| 180 F18 | |
| |----------->| 200 F21 |----------->| 180 F19 |
| | |----------->| 200 F22 |----------->|
| | | |----------->| 200 F23 |
| | | | |----------->|
| | | | | ACK F24 |
| | | | ACK F25 |<-----------|
| | | ACK F26 |<-----------| |
| | ACK F27 |<-----------| | |
| |<-----------| | | |
| | | | | |
Alice Calls Bob's SIPS AOR
Message details
F9 INVITE Alice -> Proxy A
INVITE sips:bob@example.com SIP/2.0
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
Max-Forwards: 70
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Route: <sips:proxya.example.net;lr>
Contact: <sips:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
Audet Standards Track PAGE 28
RFC 5630 SIPS October 2009
F10 100 (INVITE) Proxy A -> Alice
SIP/2.0 100 Trying
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
F11 INVITE Proxy A -> Registrar/Authoritative Proxy B
INVITE sips:bob@example.com SIP/2.0
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
Max-Forwards: 69
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route: <sips:proxya.example.net;lr>
Contact: <sips:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F12 100 (INVITE) Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 100 Trying
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
Audet Standards Track PAGE 29
RFC 5630 SIPS October 2009
F13 INVITE Registrar/Authoritative Proxy B -> Edge Proxy B
INVITE sips:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
Max-Forwards: 68
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@edge.example.com;lr;ob>
Record-Route: <sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F14 100 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 100 Trying
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
Audet Standards Track PAGE 30
RFC 5630 SIPS October 2009
F15 INVITE Edge Proxy B -> Bob's phone
INVITE sips:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKbiba
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
Max-Forwards: 67
To: Bob <sips:bob@example.com>
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F16 180 (INVITE) Bob's Phone -> Edge Proxy B
SIP/2.0 180 Ringing
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKbiba
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 31
RFC 5630 SIPS October 2009
F17 180 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 180 Ringing
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
F18 180 Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 180 Ringing
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
F19 180 (INVITE) Proxy A -> Alice
SIP/2.0 180 Ringing
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 32
RFC 5630 SIPS October 2009
F20 200 (INVITE) Bob's Phone -> Edge Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKbiba
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
F21 200 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bKbalouba
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 33
RFC 5630 SIPS October 2009
F22 200 Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 200 OK
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKpouet
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
F23 200 (INVITE) Proxy A -> Alice
SIP/2.0 200 OK
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKprout
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sips:pb.example.com;lr>, <sips:proxya.example.net;lr>
Contact: <sips:bob@bobphone.example.com>
Content-Length: 0
F24 ACK Alice -> Proxy A
ACK sips:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKksdjf
Max-Forwards: 70
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Route: <sips:proxya.example.net;lr>, <sips:pb.example.com;lr>,
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@pb.example.com;lr;ob>
Content-Length: 0
Audet Standards Track PAGE 34
RFC 5630 SIPS October 2009
F25 ACK Proxy A -> Registrar/Authoritative Proxy B
ACK sips:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKplo7hy
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKksdjf
Max-Forwards: 69
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Route: <sips:pb.example.com;lr>,
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@pb.example.com;lr;ob>
Content-Length: 0
F26 ACK Registrar/Authoritative Proxy B -> Edge Proxy B
ACK sips:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bK8msdu2
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKplo7hy
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKksdjf
Max-Forwards: 69
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Route: <sips:pb.example.com;lr>,
<sips:psodkfsj+34+kklsL+uJH-Xm816k09Kk@pb.example.com;lr;ob>
Content-Length: 0
F27 ACK Proxy B -> Bob's Phone
ACK sips:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKkmfdgk
Via: SIP/2.0/TLS pb.example.com:5061;branch=z9hG4bK8msdu2
Via: SIP/2.0/TLS proxya.example.net:5061;branch=z9hG4bKplo7hy
Via: SIP/2.0/TLS alice-1.example.net:5061;branch=z9hG4bKksdjf
Max-Forwards: 68
To: Bob <sips:bob@example.com>;tag=5551212
From: Alice <sips:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Content-Length: 0
Audet Standards Track PAGE 35
RFC 5630 SIPS October 2009
6.3. Alice Calls Bob's SIP AOR Using TCP
Bob's registration has already occurred as per Section 6.1.
In the second example, Alice calls Bob's SIP AOR instead
(sip:bob@example.com), and she uses TCP as a transport. Registrar/
Authoritative Proxy B consults the binding in the registration
database, and finds the two Contact header field bindings. Alice had
addressed Bob with a SIP Request-URI (sip:bob@example.com), so
Registrar/Authoritative Proxy B determines that the call needs to be
routed both to bobpc (which registered with a SIP Contact header
field) and bobphone (which registered with a SIPS Contact header
field), and therefore the request is forked to
sip:bob@bobpc.example.com and sip:bob@bobphone.example.com, through
Edge Proxy B. Note that Registrar/Authoritative Proxy B preserved
the SIP scheme of the Request-URI instead of replacing it with the
SIPS scheme of the Contact header field that was used for
registration. Both Registrar/Authoritative Proxy B and Edge Proxy B
insert themselves in the Record-Route. Bob's phone's policy is to
accept calls to SIP and SIPS (i.e., "best effort"), so both his PC
client and his SIP phone ring simultaneously. Bob answers on his SIP
phone, and the forked call leg to the PC client is canceled.
Audet Standards Track PAGE 36
RFC 5630 SIPS October 2009
(eb) (pb)
Edge Registrar/
Bob@bobpc Proxy B Auth. Proxy B Proxy A Alice
| | | | |
| | | | INVITE F9 |
| | | INVITE F11 |<-----------|
| | INVITE F13'|<-----------| 100 F10 |
| INVITE F15' |<-----------| 100 F12 |----------->|
|<------------------| 100 F14' |----------->| |
| 180 F16' |----------->| | |
|------------------>| 180 F17' | | |
| |----------->| 180 F18' | |
| Bob@bobphone | |----------->| 180 F19' |
| | | INVITE F13 | |----------->|
| | INVITE F15 |<-----------| | |
| |<-----------| 100 F14 | | |
| | 180 F16 |----------->| | |
| |----------->| 180 F17 | | |
| | 200 F20 |----------->| 180 F18 | |
| |----------->| 200 F21 |----------->| 180 F19 |
| | |----------->| 200 F22 |----------->|
| | | |----------->| 200 F23 |
| | | | |----------->|
| | | | | ACK F24 |
| | | | ACK F25 |<-----------|
| | | ACK F26 |<-----------| |
| | ACK F27 |<-----------| | |
| |<-----------| | | |
| | CANCEL F26'| | |
| CANCEL F27' |<-----------| | |
|<------------------| | | |
| 200 F28' | | | |
|------------------>| 200 F29' | | |
| 487 F30' |----------->| | |
|------------------>| 487 F31' | | |
| |----------->| | |
Alice Calls Bob's SIP AOR
Audet Standards Track PAGE 37
RFC 5630 SIPS October 2009
Message details
F9 INVITE Alice -> Proxy A
INVITE sip:bob@example.com SIP/2.0
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 70
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Route: <sip:proxya.example.net;lr>
Contact: <sip:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F10 100 (INVITE) Proxy A -> Alice
SIP/2.0 100 Trying
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
F11 INVITE Proxy A -> Registrar/Authoritative Proxy B
INVITE sip:bob@example.com SIP/2.0
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 69
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route: <sip:proxya.example.net;lr>
Contact: <sip:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
Audet Standards Track PAGE 38
RFC 5630 SIPS October 2009
F12 100 (INVITE) Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 100 Trying
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
F13' INVITE Registrar/Authoritative Proxy B -> Edge Proxy B
INVITE sip:bob@bobpc.example.com SIP/2.0
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 68
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Route: <sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>
Record-Route: <sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F14' 100 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 100 Trying
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
Audet Standards Track PAGE 39
RFC 5630 SIPS October 2009
F15' INVITE Edge Proxy B -> Bob's PC Client
INVITE sip:bob@bobpc.example.com SIP/2.0
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bKbiba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 67
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F16' 180 (INVITE) Bob's PC Client -> Edge Proxy B
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bKbiba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=963258
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobpc.example.com>
Content-Length: 0
Audet Standards Track PAGE 40
RFC 5630 SIPS October 2009
F17' 180 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=963258
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobpc.example.com>
Content-Length: 0
F18' 180 (INVITE) Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=963258
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobpc.example.com>
Content-Length: 0
Audet Standards Track PAGE 41
RFC 5630 SIPS October 2009
F19' 180 (INVITE) Proxy A -> Alice
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=963258
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:laksdyjanseg237+fsdf+uy623hytIJ8@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobpc.example.com>
Content-Length: 0
F13 INVITE Registrar/Authoritative Proxy B -> Edge Proxy B
INVITE sip:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 68
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Route: <sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Record-Route: <sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F14 100 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 100 Trying
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
Audet Standards Track PAGE 42
RFC 5630 SIPS October 2009
F15 INVITE Edge Proxy B -> Bob's Phone
INVITE sip:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 68
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:alice@alice-1.example.net>
Content-Type: application/sdp
Content-Length: {as per SDP}
{SDP not shown}
F16 180 (INVITE) Bob's Phone -> Edge Proxy B
SIP/2.0 180 Ringing
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 43
RFC 5630 SIPS October 2009
F17 180 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
F18 180 (INVITE) Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 44
RFC 5630 SIPS October 2009
F19 180 (INVITE) Proxy A -> Alice
SIP/2.0 180 Ringing
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
F20 200 (INVITE) Bob's Phone -> Edge Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 45
RFC 5630 SIPS October 2009
F21 200 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
F22 200 (INVITE) Registrar/Authoritative Proxy B -> Proxy A
SIP/2.0 200 OK
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
Audet Standards Track PAGE 46
RFC 5630 SIPS October 2009
F23 200 (INVITE) Proxy A -> Alice
SIP/2.0 200 OK
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Record-Route:
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>,
<sip:pb.example.com;lr>, <sip:proxya.example.net;lr>
Contact: <sip:bob@bobphone.example.com>
Content-Length: 0
F24 ACK Alice -> Proxy A
ACK sip:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 70
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Route: <sip:proxya.example.net;lr>, <sip:pb.example.com;lr>,
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@edge.example.com;lr;ob>
Content-Length: 0
F25 ACK Proxy A -> Registrar/Authoritative Proxy B
ACK sip:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 69
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Route: <sip:pb.example.com;lr>,
<sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Content-Length: 0
Audet Standards Track PAGE 47
RFC 5630 SIPS October 2009
F26 ACK Registrar/Authoritative Proxy B -> Edge Proxy B
ACK sip:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 69
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Route: <sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Content-Length: 0
F27 ACK Proxy B -> Bob's Phone
ACK sip:bob@bobphone.example.com SIP/2.0
Via: SIP/2.0/TLS eb.example.com:5061;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.1
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
Max-Forwards: 68
To: Bob <sip:bob@example.com>;tag=5551212
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 ACK
Content-Length: 0
F26' CANCEL Registrar/Authoritative Proxy B -> Edge Proxy B
CANCEL sip:bob@bobpc.example.com SIP/2.0
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Max-Forwards: 70
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 CANCEL
Route: <sip:psodkfsj+34+kklsL+uJH-Xm816k09Kk@eb.example.com;lr;ob>
Content-Length: 0
Audet Standards Track PAGE 48
RFC 5630 SIPS October 2009
F27' CANCEL Edge Proxy B -> Bob's PC Client
CANCEL sip:bob@bobpc.example.com SIP/2.0
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Max-Forwards: 69
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 CANCEL
Content-Length: 0
F28' 200 (CANCEL) Bob's PC Client -> Edge Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 CANCEL
Content-Length: 0
F29' 200 (CANCEL) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 200 OK
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 CANCEL
Content-Length: 0
Audet Standards Track PAGE 49
RFC 5630 SIPS October 2009
F30' 487 (INVITE) Bob's PC Client -> Edge Proxy B
SIP/2.0 487 Request Terminated
Via: SIP/2.0/TCP eb.example.com:5060;branch=z9hG4bKtroubaba
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
F31' 487 (INVITE) Edge Proxy B -> Registrar/Authoritative Proxy B
SIP/2.0 487 Request Terminated
Via: SIP/2.0/TCP pb.example.com:5060;branch=z9hG4bKbalouba.2
Via: SIP/2.0/TCP proxya.example.net:5060;branch=z9hG4bKpouet
Via: SIP/2.0/TCP alice-1.example.net:5060;branch=z9hG4bKprout
To: Bob <sip:bob@example.com>
From: Alice <sip:alice@example.net>;tag=8675309
Call-ID: lzksjf8723k@sodk6587
CSeq: 1 INVITE
Content-Length: 0
6.4. Alice Calls Bob's SIP AOR Using TLS
Bob's registration has already occurred as per Section 6.1.
The third example is identical to the second one, except that Alice
uses TLS as the transport for her connection to her proxy. Such an
arrangement would be common if Alice's UA supported TLS and wanted to
use a single connection to the proxy (as would be the case when using
[RFC 5626]). In the example below, Proxy A is also using TLS as a
transport to communicate with Outbound Proxy B, but it is not
necessarily the case.
When using a SIP URI in the Request-URI but TLS as a transport for
sending the request, the Via field indicates TLS. The Route header
field (if present) typically would use a SIP URI (but it could also
be a SIPS URI). The Contact header fields and To and From, however
would also normally indicate a SIP URI.
The call flow would be exactly as per the second example
(Section 6.3). The only difference would be that all the Via header
fields would use TLS Via parameters. The URIs would remain SIP URIs
and not SIPS URIs.
Audet Standards Track PAGE 50
RFC 5630 SIPS October 2009
7. Further Considerations
SIP [RFC 3261] itself introduces some complications with using SIPS,
for example, when Record-Route is not used. When a SIPS URI is used
in a Contact header field in a dialog-initiating request and Record-
Route is not used, that SIPS URI might not be usable by the other
end. If the other end does not support SIPS and/or TLS, it will not
be able to use it. The last-hop exception is an example of when this
can occur. In this case, using Record-Route so that the requests are
sent through proxies can help in making it work. Another example is
that even in a case where the Contact header field is a SIPS URI, no
Record-Route is used, and the far end supports SIPS and TLS, it might
still not be possible for the far end to establish a TLS connection
with the SIP originating end if the certificate cannot be validated
by the far end. This could typically be the case if the originating
end was using server-side authentication as described below, or if
the originating end is not using a certificate that can be validated.
TLS itself has a significant impact on how SIPS can be used. Server-
side authentication (where the server side provides its certificate
but the client side does not) is typically used between a SIP end-
user device acting as the TLS client side (e.g., a phone or a
personal computer) and its SIP server (proxy or registrar) acting as
the TLS server side. TLS mutual authentication (where both the
client side and the server side provide their respective
certificates) is typically used between SIP servers (proxies,
registrars), or statically configured devices such as PSTN gateways
or media servers. In the mutual authentication model, for two
entities to be able to establish a TLS connection, it is required
that both sides be able to validate each other's certificates, either
by static configuration or by being able to recurse to a valid root
certificate. With server-side authentication, only the client side
is capable of validating the server side's certificate, as the client
side does not provide a certificate. The consequences of all this
are that whenever a SIPS URI is used to establish a TLS connection,
it is expected to be possible for the entity establishing the
connection (the client) to validate the certificate from the server
side. For server-side authentication, [RFC 5626] is the recommended
approach. For mutual authentication, one needs to ensure that the
architecture of the network is such that connections are made between
entities that have access to each other's certificates. Record-Route
[RFC 3261] and Path [RFC 3327] are very useful in ensuring that
previously established TLS connections can be reused. Other
mechanisms might also be used in certain circumstances: for example,
using root certificates that are widely recognized allows for more
easily created TLS connections.
Audet Standards Track PAGE 51
RFC 5630 SIPS October 2009
8. Security Considerations
Most of this document can be considered to be security considerations
since it applies to the usage of the SIPS URI.
The "last-hop exception" of [RFC 3261] introduced significant
potential vulnerabilities in SIP, and it has therefore been
deprecated by this specification.
Section 26.4.4 of [RFC 3261] describes the security considerations for
the SIPS URI scheme. These security considerations also applies
here, as modified by Appendix A.
9. IANA Considerations
This specification registers two new warning codes, namely, 380 "SIPS
Not Allowed" and 381 "SIPS Required". The warning codes are defined
as follows, and have been included in the Warning Codes (warn-codes)
sub-registry of the SIP Parameters registry available from
http://www.iana.org.
380 SIPS Not Allowed: The UAS or proxy cannot process the request
because the SIPS scheme is not allowed (e.g., because there are
currently no registered SIPS contacts).
381 SIPS Required: The UAS or proxy cannot process the request
because the SIPS scheme is required.
Reference: RFC 5630
The note in the Warning Codes sub-registry is as follows:
Warning codes provide information supplemental to the status code
in SIP response messages.
10. Acknowledgments
The author would like to thank Jon Peterson, Cullen Jennings,
Jonathan Rosenberg, John Elwell, Paul Kyzivat, Eric Rescorla, Robert
Sparks, Rifaat Shekh-Yusef, Peter Reissner, Tina Tsou, Keith Drage,
Brian Stucker, Patrick Ma, Lavis Zhou, Joel Halpern, Hisham
Karthabil, Dean Willis, Eric Tremblay, Hans Persson, and Ben Campbell
for their careful review and input. Many thanks to Rohan Mahy for
helping me with the subtleties of [RFC 5626].
Audet Standards Track PAGE 52
RFC 5630 SIPS October 2009
11. References
11.1. Normative References
[RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC 3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and E.
Schooler, "SIP: Session Initiation Protocol", RFC 3261,
June 2002.
[RFC 5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008.
[RFC 5626] Jennings, C., "Managing Client-Initiated Connections in
the Session Initiation Protocol (SIP)", RFC 5626, October
2009.
11.2. Informative References
[RFC 2543] Handley, M., Schulzrinne, H., Schooler, E., and J.
Rosenberg, "SIP: Session Initiation Protocol", RFC 2543,
March 1999.
[RFC 3327] Willis, D. and B. Hoeneisen, "Session Initiation Protocol
(SIP) Extension Header Field for Registering Non-Adjacent
Contacts", RFC 3327, December 2002.
[RFC 3515] Sparks, R., "The Session Initiation Protocol (SIP) Refer
Method", RFC 3515, April 2003.
[RFC 3608] Willis, D. and B. Hoeneisen, "Session Initiation Protocol
(SIP) Extension Header Field for Service Route Discovery
During Registration", RFC 3608, October 2003.
[RFC 3725] Rosenberg, J., Peterson, J., Schulzrinne, H., and G.
Camarillo, "Best Current Practices for Third Party Call
Control (3pcc) in the Session Initiation Protocol (SIP)",
BCP 85, RFC 3725, April 2004.
[RFC 3891] Mahy, R., Biggs, B., and R. Dean, "The Session Initiation
Protocol (SIP) "Replaces" Header", RFC 3891,
September 2004.
[RFC 3893] Peterson, J., "Session Initiation Protocol (SIP)
Authenticated Identity Body (AIB) Format", RFC 3893,
September 2004.
Audet Standards Track PAGE 53
RFC 5630 SIPS October 2009
[RFC 3911] Mahy, R. and D. Petrie, "The Session Initiation Protocol
(SIP) "Join" Header", RFC 3911, October 2004.
[RFC 4168] Rosenberg, J., Schulzrinne, H., and G. Camarillo, "The
Stream Control Transmission Protocol (SCTP) as a Transport
for the Session Initiation Protocol (SIP)", RFC 4168,
October 2005.
[RFC 4244] Barnes, M., "An Extension to the Session Initiation
Protocol (SIP) for Request History Information", RFC 4244,
November 2005.
[RFC 4474] Peterson, J. and C. Jennings, "Enhancements for
Authenticated Identity Management in the Session
Initiation Protocol (SIP)", RFC 4474, August 2006.
[RFC 5627] Rosenberg, J., "Obtaining and Using Globally Routable User
Agent URIs (GRUU) in the Session Initiation Protocol
(SIP)", RFC 5627, October 2009.
Audet Standards Track PAGE 54
RFC 5630 SIPS October 2009
Appendix A. Bug Fixes for RFC 3261
In order to support the material in this document, this section makes
corrections to RFC 3261.
The last sentence of the fifth paragraph of Section 8.1.3.5 is
replaced by:
The client SHOULD retry the request, this time, using a SIP URI
unless the original Request-URI used a SIPS scheme, in which case
the client MUST NOT retry the request automatically.
The fifth paragraph of Section 10.2.1 is replaced by:
If the Address of Record in the To header field of a REGISTER
request is a SIPS URI, then the UAC MUST also include only SIPS
URIs in any Contact header field value in the requests.
In Section 16.7 on p. 112 describing Record-Route, the second
paragraph is deleted.
The last paragraph of Section 19.1 is reworded as follows:
A SIPS URI specifies that the resource be contacted securely.
This means, in particular, that TLS is to be used on each hop
between the UAC and the resource identified by the target SIPS
URI. Any resources described by a SIP URI (...)
In the third paragraph of Section 20.43, the words "the session
description" in the first sentence are replaced with "SIP". Later in
the paragraph, "390" is replaced with "380", and "miscellaneous
warnings" is replaced with "miscellaneous SIP-related warnings".
The second paragraph of Section 26.2.2 is reworded as follows:
(...) When used as the Request-URI of a request, the SIPS scheme
signifies that each hop over which the request is forwarded, until
the request reaches the resource identified by the Request-URI, is
secured with TLS. When used by the originator of a request (as
would be the case if they employed a SIPS URI as the address-of-
record of the target), SIPS dictates that the entire request path
to the target domain be so secured.
The first paragraph of Section 26.4.4 is replaced by the following:
Actually using TLS on every segment of a request path entails that
the terminating UAS is reachable over TLS (by registering with a
SIPS URI as a contact address). The SIPS scheme implies
Audet Standards Track PAGE 55
RFC 5630 SIPS October 2009
transitive trust. Obviously, there is nothing that prevents
proxies from cheating. Thus, SIPS cannot guarantee that TLS usage
will be truly respected end-to-end on each segment of a request
path. Note that since many UAs will not accept incoming TLS
connections, even those UAs that do support TLS will be required
to maintain persistent TLS connections as described in the TLS
limitations section above in order to receive requests over TLS as
a UAS.
The first sentence of the third paragraph of Section 26.4.4 is
replaced by the following:
Ensuring that TLS will be used for all of the request segments up
to the target UAS is somewhat complex.
The fourth paragraph of Section 26.4.4 is deleted.
The last sentence of the fifth paragraph of Section 26.4.4 is
reworded as follows:
S/MIME or, preferably, [RFC 4474] may also be used by the
originating UAC to help ensure that the original form of the To
header field is carried end-to-end.
In the third paragraph of Section 27.2, the phrase "when the failure
of the transaction results from a Session Description Protocol (SDP)
(RFC 2327 [1]) problem" is deleted.
In the fifth paragraph of Section 27.2, "390" is replaced with "380",
and "miscellaneous warnings" is replaced with "miscellaneous SIP-
related warnings".
Author's Address
Francois Audet
Skype Labs
EMail: francois.audet@skypelabs.com
Audet Standards Track PAGE 56
The Use of the SIPS URI Scheme in the Session Initiation Protocol (SIP)
RFC TOTAL SIZE: 114513 bytes
PUBLICATION DATE: Thursday, October 22nd, 2009
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
