|
|
|
|
|
|
IETF RFC 4758
Cryptographic Token Key Initialization Protocol (CT-KIP) Version 1.0 Revision 1
Last modified on Thursday, November 30th, 2006
 Permanent link to RFC 4758
 Search GitHub Wiki for RFC 4758
 Show other RFCs mentioning RFC 4758
Network Working Group M. Nystroem
Request for Comments: 4758 RSA Security
Category: Informational November 2006
Cryptographic Token Key Initialization Protocol (CT-KIP)
Version 1.0 Revision 1
 Status of This Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright © The IETF Trust (2006).
Abstract
This document constitutes Revision 1 of Cryptographic Token Key
Initialization Protocol (CT-KIP) Version 1.0 from RSA Laboratories'
One-Time Password Specifications (OTPS) series. The body of this
document, except for the intellectual property considerations
section, is taken from the CT-KIP Version 1.0 document, but comments
received during the IETF review are reflected; hence, the status of a
revised version. As no "bits-on-the-wire" have changed, the protocol
specified herein is compatible with CT-KIP Version 1.0.
CT-KIP is a client-server protocol for initialization (and
configuration) of cryptographic tokens. The protocol requires
neither private-key capabilities in the cryptographic tokens, nor an
established public-key infrastructure. Provisioned (or generated)
secrets will only be available to the server and the cryptographic
token itself.
Nystroem Informational PAGE 1 
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
Table of Contents
1. Introduction ....................................................4
1.1. Scope ......................................................4
1.2. Background .................................................4
1.3. Document Organization ......................................5
2. Acronyms and Notation ...........................................5
2.1. Acronyms ...................................................5
2.2. Notation ...................................................5
3. CT-KIP ..........................................................6
3.1. Overview ...................................................6
3.2. Entities ...................................................7
3.3. Principles of Operation ....................................7
3.4. The CT-KIP One-Way Pseudorandom Function, CT-KIP-PRF ......10
3.4.1. Introduction .......................................10
3.4.2. Declaration ........................................11
3.5. Generation of Cryptographic Keys for Tokens ...............11
3.6. Encryption of Pseudorandom Nonces Sent from the
CT-KIP Client .............................................12
3.7. CT-KIP Schema Basics ......................................13
3.7.1. Introduction .......................................13
3.7.2. General XML Schema Requirements ....................13
3.7.3. The AbstractRequestType Type .......................13
3.7.4. The AbstractResponseType type ......................14
3.7.5. The StatusCode Type ................................14
3.7.6. The IdentifierType Type ............................16
3.7.7. The NonceType Type .................................16
3.7.8. The ExtensionsType and the
AbstractExtensionType Types ........................17
3.8. CT-KIP Messages ...........................................17
3.8.1. Introduction .......................................17
3.8.2. CT-KIP Initialization ..............................17
3.8.3. The CT-KIP Client's Initial PDU ....................18
3.8.4. The CT-KIP server's initial PDU ....................20
3.8.5. The CT-KIP Client's Second PDU .....................23
3.8.6. The CT-KIP Server's Final PDU ......................24
3.9. Protocol Extensions .......................................27
3.9.1. The ClientInfoType Type ............................27
3.9.2. The ServerInfoType Type ............................28
3.9.3. The OTPKeyConfigurationDataType Type ...............28
4. Protocol Bindings ..............................................29
4.1. General Requirement .......................................29
4.2. HTTP/1.1 binding for CT-KIP ...............................29
4.2.1. Introduction .......................................29
4.2.2. Identification of CT-KIP Messages ..................29
4.2.3. HTTP Headers .......................................29
4.2.4. HTTP Operations ....................................30
4.2.5. HTTP Status Codes ..................................30
Nystroem Informational PAGE 2
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
4.2.6. HTTP Authentication ................................31
4.2.7. Initialization of CT-KIP ...........................31
4.2.8. Example Messages ...................................31
5. Security considerations ........................................32
5.1. General ...................................................32
5.2. Active Attacks ............................................32
5.2.1. Introduction .......................................32
5.2.2. Message Modifications ..............................32
5.2.3. Message Deletion ...................................34
5.2.4. Message Insertion ..................................34
5.2.5. Message Replay .....................................34
5.2.6. Message Reordering .................................35
5.2.7. Man in the Middle ..................................35
5.3. Passive Attacks ...........................................35
5.4. Cryptographic Attacks .....................................35
5.5. Attacks on the Interaction between CT-KIP and User
Authentication ............................................36
6. Intellectual Property Considerations ...........................36
7. References .....................................................37
7.1. Normative References ......................................37
7.2. Informative References ....................................37
Appendix A. CT-KIP Schema .........................................39
Appendix B. Examples of CT-KIP Messages ...........................46
B.1. Introduction ..............................................46
B.2. Example of a CT-KIP Initialization (Trigger) Message ......46
B.3. Example of a <ClientHello> Message ........................46
B.4. Example of a <ServerHello> Message ........................47
B.5. Example of a <ClientNonce> Message ........................47
B.6. Example of a <ServerFinished> Message .....................48
Appendix C. Integration with PKCS #11 .............................48
Appendix D. Example CT-KIP-PRF Realizations .......................48
D.1. Introduction ..............................................48
D.2. CT-KIP-PRF-AES ............................................48
D.2.1. Identification .....................................48
D.2.2. Definition .........................................49
D.2.3. Example ............................................50
D.3. CT-KIP-PRF-SHA256 .........................................50
D.3.1. Identification .....................................50
D.3.2. Definition .........................................51
D.3.3. Example ............................................52
Appendix E. About OTPS ............................................53
Nystroem Informational PAGE 3
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
1. Introduction
Note: This document is Revision 1 of CT-KIP Version 1.0 [12] from RSA
Laboratories' OTPS series.
1.1. Scope
This document describes a client-server protocol for initialization
(and configuration) of cryptographic tokens. The protocol requires
neither private-key capabilities in the cryptographic tokens, nor an
established public-key infrastructure.
The objectives of this protocol are:
o To provide a secure method of initializing cryptographic tokens
with secret keys without exposing generated, secret material to
any other entities than the server and the cryptographic token
itself,
o To avoid, as much as possible, any impact on existing
cryptographic token manufacturing processes,
o To provide a solution that is easy to administer and scales well.
The mechanism is intended for general use within computer and
communications systems employing connected cryptographic tokens (or
software emulations thereof).
1.2. Background
A cryptographic token may be a handheld hardware device, a hardware
device connected to a personal computer through an electronic
interface such as USB, or a software module resident on a personal
computer, which offers cryptographic functionality that may be used,
e.g., to authenticate a user towards some service. Increasingly,
these tokens work in a connected fashion, enabling their programmatic
initialization as well as programmatic retrieval of their output
values. This document intends to meet the need for an open and
interoperable mechanism to programmatically initialize and configure
connected cryptographic tokens. A companion document entitled "A
PKCS #11 Mechanism for the Cryptographic Token Key Initialization
Protocol" [2] describes an application-programming interface suitable
for use with this mechanism.
Nystroem Informational PAGE 4
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
1.3. Document Organization
The organization of this document is as follows:
o Section 1 is an introduction.
o Section 2 defines some notation used in this document.
o Section 3 defines the protocol mechanism in detail.
o Section 4 defines a binding of the protocol to transports.
o Section 5 provides security considerations.
o Appendix A defines the XML schema for the protocol mechanism,
Appendix B gives example messages, and Appendix C discusses
integration with PKCS #11 [3].
o Appendix D provides example realizations of an abstract
pseudorandom function defined in Section 3.
o Appendix E provides general information about the One-Time
Password Specifications.
2. Acronyms and Notation
2.1. Acronyms
MAC Message Authentication Code
PDU Protocol Data Unit
PRF Pseudo-Random Function
CT-KIP Cryptographic Token Key Initialization Protocol (the
protocol mechanism described herein)
2.2. Notation
|| String concatenation
[x] Optional element x
A ^ B Exclusive-or operation on strings A and B (A and B of equal
length)
K_AUTH Secret key used for authentication purposes
Nystroem Informational PAGE 5
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
K_TOKEN Secret key used for token computations, generated in CT-KIP
K_SERVER Public key of CT-KIP server
K_SHARED Secret key shared between the cryptographic token and the
CT-KIP server
K Key used to encrypt R_C (either K_SERVER or K_SHARED)
R Pseudorandom value chosen by the cryptographic token and
used for MAC computations
R_C Pseudorandom value chosen by the cryptographic token
R_S Pseudorandom value chosen by the CT-KIP server
The following typographical convention is used in the body of the
text: <XMLElement>.
3. CT-KIP
3.1. Overview
The CT-KIP is a client-server protocol for the secure initialization
of cryptographic tokens. The protocol is meant to provide high
assurance for both the server and the client (cryptographic token)
that generated keys have been correctly and randomly generated and
not exposed to other entities. The protocol does not require the
existence of a public-key infrastructure.
+---------------+ +---------------+
| | | |
| CT-KIP client | | CT-KIP server |
| | | |
+---------------+ +---------------+
| |
| [ <---- CT-KIP trigger ---- ] |
| |
| ------- Client Hello -------> |
| |
| <------ Server Hello -------- |
| |
| ------- Client Nonce -------> |
| |
| <----- Server Finished ------ |
Figure 1: The 4-pass CT-KIP protocol (with optional preceding
trigger)
Nystroem Informational PAGE 6
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
3.2. Entities
In principle, the protocol involves a CT-KIP client and a CT-KIP
server.
It is assumed that a desktop/laptop or a wireless device (e.g., a
mobile phone or a PDA) will host an application communicating with
the CT-KIP server as well as the cryptographic token, and
collectively, the cryptographic token and the communicating
application form the CT-KIP client. When there is a need to point
out if an action is to be performed by the communicating application
or by the token the text will make this explicit.
The manner in which the communicating application will transfer CT-
KIP protocol elements to and from the cryptographic token is
transparent to the CT-KIP server. One method for this transfer is
described in [2].
3.3. Principles of Operation
To initiate a CT-KIP session, a user may use a browser to connect to
a web server running on some host. The user may then identify (and
authenticate) herself (through some means that essentially are out of
scope for this document) and possibly indicate how the CT-KIP client
shall contact the CT-KIP server. There are also other alternatives
for CT-KIP session initiation, such as the CT-KIP client being pre-
configured to contact a certain CT-KIP server, or the user being
informed out-of-band about the location of the CT-KIP server. In any
event, once the location of the CT-KIP server is known, the CT-KIP
client and the CT-KIP server engage in a 4-pass protocol in which:
a. The CT-KIP client provides information to the CT-KIP server about
the cryptographic token's identity, supported CT-KIP versions,
cryptographic algorithms supported by the token and for which
keys may be generated using this protocol, and encryption and MAC
algorithms supported by the cryptographic token for the purposes
of this protocol.
b. Based on this information, the CT-KIP server provides a random
nonce, R_S, to the CT-KIP client, along with information about
the type of key to generate, the encryption algorithm chosen to
protect sensitive data sent in the protocol. In addition, it
provides either information about a shared secret key to use for
encrypting the cryptographic token's random nonce (see below), or
its own public key. The length of the nonce R_S may depend on
the selected key type.
Nystroem Informational PAGE 7
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
c. The cryptographic token generates a random nonce R_C and encrypts
it using the selected encryption algorithm and with a key K that
is either the CT-KIP server's public key K_SERVER, or a shared
secret key K_SHARED as indicated by the CT-KIP server. The
length of the nonce R_C may depend on the selected key type. The
CT-KIP client then sends the encrypted random nonce to the CT-KIP
server. The token also calculates a cryptographic key K_TOKEN of
the selected type from the combination of the two random nonces
R_S and R_C, the encryption key K, and possibly some other data,
using the CT-KIP-PRF function defined herein.
d. The CT-KIP server decrypts R_C, calculates K_TOKEN from the
combination of the two random nonces R_S and R_C, the encryption
key K, and possibly some other data, using the CT-KIP-PRF
function defined herein. The server then associates K_TOKEN with
the cryptographic token in a server-side data store. The intent
is that the data store later on will be used by some service that
needs to verify or decrypt data produced by the cryptographic
token and the key.
e. Once the association has been made, the CT-KIP server sends a
confirmation message to the CT-KIP client. The confirmation
message includes an identifier for the generated key and may also
contain additional configuration information, e.g., the identity
of the CT-KIP server.
f. Upon receipt of the CT-KIP server's confirmation message, the
cryptographic token associates the provided key identifier with
the generated key K_TOKEN, and stores the provided configuration
data, if any.
Note: Conceptually, although R_C is one pseudorandom string, it may
be viewed as consisting of two components, R_C1 and R_C2, where R_C1
is generated during the protocol run, and R_C2 can be generated at
the cryptographic token manufacturing time and stored in the
cryptographic token. In that case, the latter string, R_C2, should
be unique for each cryptographic token for a given manufacturer.
Nystroem Informational PAGE 8
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
+----------------------+ +-------+ +----------------------+
| +------------+ | | | | |
| | Server key | | | | | |
| +<-| Public |------>------------->-------------+---------+ |
| | | Private | | | | | | | |
| | +------------+ | | | | | | |
| | | | | | | | | |
| V V | | | | V V |
| | +---------+ | | | | +---------+ | |
| | | Decrypt |<-------<-------------<-----------| Encrypt | | |
| | +---------+ | | | | +---------+ | |
| | | +--------+ | | | | ^ | |
| | | | Server | | | | | | | |
| | | | Random |--->------------->------+ +----------+ | |
| | | +--------+ | | | | | | Client | | |
| | | | | | | | | | Random | | |
| | | | | | | | | +----------+ | |
| | | | | | | | | | | |
| | V V | | | | V V | |
| | +------------+ | | | | +------------+ | |
| +-->| CT-KIP PRF | | | | | | CT-KIP PRF |<----+ |
| +------------+ | | | | +------------+ |
| | | | | | | |
| V | | | | V |
| +-------+ | | | | +-------+ |
| | Key | | | | | | Key | |
| +-------+ | | | | +-------+ |
| +-------+ | | | | +-------+ |
| |Key Id |-------->------------->------|Key Id | |
| +-------+ | | | | +-------+ |
+----------------------+ +-------+ +----------------------+
CT-KIP Server CT-KIP Client CT-KIP Client (Token)
(PC Host)
Figure 2: Principal data flow for CT-KIP key generation - using
public server key
The inclusion of the two random nonces R_S and R_C in the key
generation provides assurance to both sides (the token and the CT-KIP
server) that they have contributed to the key's randomness and that
the key is unique. The inclusion of the encryption key K ensures
that no man-in-the-middle may be present, or else the cryptographic
token will end up with a key different from the one stored by the
legitimate CT-KIP server.
Note: A man-in-the middle (in the form of corrupt client software or
a mistakenly contacted server) may present his own public key to the
token. This will enable the attacker to learn the client's version
Nystroem Informational PAGE 9
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
of K_TOKEN. However, the attacker is not able to persuade the
legitimate server to derive the same value for K_TOKEN, since K_TOKEN
is a function of the public key involved, and the attacker's public
key must be different than the correct server's (or else the attacker
would not be able to decrypt the information received from the
client). Therefore, once the attacker is no longer "in the middle",
the client and server will detect that they are "out of synch" when
they try to use their keys. Therefore, in the case of encrypting R_C
with K_SERVER, it is important to verify that K_SERVER really is the
legitimate server's key. One way to do this is to independently
validate a newly generated K_TOKEN against some validation service at
the server (e.g., by using a connection independent from the one used
for the key generation).
The CT-KIP server may couple an initial user authentication to the
CT-KIP execution in several ways to ensure that a generated K_TOKEN
ends up associated with the correct token and user. One way is to
provide a one-time value to the user or CT-KIP client after
successful user authentication and require this value to be used when
contacting the CT-KIP service (in effect coupling the user
authentication with the subsequent CT-KIP protocol run). This value
could, for example, be placed in a <TriggerNonce> element of the CT-
KIP initialization trigger (if triggers are used; see Section 4.2.7).
Another way is for the user to provide a token identifier which will
later be used in the CT-KIP protocol to the server during the
authentication phase. The server may then include this token
identifier in the CT-KIP initialization trigger. It is also
legitimate for a CT-KIP client to initiate a CT-KIP protocol run
without having received an initialization message from a server, but
in this case any provided token identifier shall not be accepted by
the server unless the server has access to a unique token key for the
identified token and that key will be used in the protocol. Whatever
the method, the CT-KIP server must ensure that a generated key is
associated with the correct token and, if applicable, the correct
user. For a further discussion of this and threats related to man-
in-the-middle attacks in this context, see Section 5.5.
3.4. The CT-KIP One-Way Pseudorandom Function, CT-KIP-PRF
3.4.1. Introduction
The general requirements on CT-KIP-PRF are the same as on keyed hash
functions: It shall take an arbitrary length input, and be one-way
and collision-free (for a definition of these terms, see, e.g., [4]).
Further, the CT-KIP-PRF function shall be capable of generating a
variable-length output, and its output shall be unpredictable even if
other outputs for the same key are known.
Nystroem Informational PAGE 10
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
It is assumed that any realization of CT-KIP-PRF takes three input
parameters: A secret key k, some combination of variable data, and
the desired length of the output. Examples of the variable data
include, but are not limited to, a current token counter value, the
current token time, and a challenge. The combination of variable
data can, without loss of generalization, be considered as a salt
value (see PKCS #5 Version 2.0 [5], Section 4), and this
characterization of CT-KIP-PRF should fit all actual PRF algorithms
implemented by tokens. From the point of view of this specification,
CT-KIP-PRF is a "black-box" function that, given the inputs,
generates a pseudorandom value.
Separate specifications may define the implementation of CT-KIP-PRF
for various types of cryptographic tokens. Appendix D contains two
example realizations of CT-KIP-PRF.
3.4.2. Declaration
CT-KIP-PRF (k, s, dsLen)
Input:
k secret key in octet string format
s octet string of varying length consisting of variable data
distinguishing the particular string being derived
dsLen desired length of the output
Output:
DS pseudorandom string, dsLen-octets long
For the purposes of this document, the secret key k shall be 16
octets long.
3.5. Generation of Cryptographic Keys for Tokens
In CT-KIP, keys are generated using the CT-KIP-PRF function, a secret
random value R_C chosen by the CT-KIP client, a random value R_S
chosen by the CT-KIP server, and the key k used to encrypt R_C. The
input parameter s of CT-KIP-PRF is set to the concatenation of the
(ASCII) string "Key generation", k, and R_S, and the input parameter
dsLen is set to the desired length of the key, K_TOKEN (the length of
K_TOKEN is given by the key's type):
Nystroem Informational PAGE 11
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
dsLen = (desired length of K_TOKEN)
K_TOKEN = CT-KIP-PRF (R_C, "Key generation" || k || R_S, dsLen)
When computing K_TOKEN above, the output of CT-KIP-PRF may be subject
to an algorithm-dependent transform before being adopted as a key of
the selected type. One example of this is the need for parity in DES
keys.
3.6. Encryption of Pseudorandom Nonces Sent from the CT-KIP Client
CT-KIP client random nonce(s) are either encrypted with the public
key provided by the CT-KIP server or by a shared secret key. For
example, in the case of a public RSA key, an RSA encryption scheme
from PKCS #1 [6] may be used.
In the case of a shared secret key, to avoid dependence on other
algorithms, the CT-KIP client may use the CT-KIP-PRF function
described herein with the shared secret key K_SHARED as input
parameter k (in this case, K_SHARED should be used solely for this
purpose), the concatenation of the (ASCII) string "Encryption" and
the server's nonce R_S as input parameter s, and dsLen set to the
length of R_C:
dsLen = len(R_C)
DS = CT-KIP-PRF(K_SHARED, "Encryption" || R_S, dsLen)
This will produce a pseudorandom string DS of length equal to R_C.
Encryption of R_C may then be achieved by XOR-ing DS with R_C:
Enc-R_C = DS ^ R_C
The CT-KIP server will then perform the reverse operation to extract
R_C from Enc-R_C.
Note: It may appear that an attacker, who learns a previous value of
R_C, may be able to replay the corresponding R_S and, hence, learn a
new R_C as well. However, this attack is mitigated by the
requirement for a server to show knowledge of K_AUTH (see below) in
order to successfully complete a key re-generation.
Nystroem Informational PAGE 12
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
3.7. CT-KIP Schema Basics
3.7.1. Introduction
Core parts of the XML schema for CT-KIP, found in Appendix A, are
explained in this section. Specific protocol message elements are
defined in Section 3.8. Examples can be found in Appendix B.
The XML format for CT-KIP messages have been designed to be
extensible. However, it is possible that the use of extensions will
harm interoperability; therefore, any use of extensions should be
carefully considered. For example, if a particular implementation
relies on the presence of a proprietary extension, then it may not be
able to interoperate with independent implementations that have no
knowledge of this extension.
XML types defined in this sub-section are not CT-KIP messages; rather
they provide building blocks that are used by CT-KIP messages.
3.7.2. General XML Schema Requirements
Some CT-KIP elements rely on the parties being able to compare
received values with stored values. Unless otherwise noted, all
elements in this document that have the XML Schema "xs:string" type,
or a type derived from it, must be compared using an exact binary
comparison. In particular, CT-KIP implementations must not depend on
case-insensitive string comparisons, normalization or trimming of
white space, or conversion of locale-specific formats such as
numbers.
Implementations that compare values that are represented using
different character encodings must use a comparison method that
returns the same result as converting both values to the Unicode
character encoding, Normalization Form C [1], and then performing an
exact binary comparison.
No collation or sorting order for attributes or element values is
defined. Therefore, CT-KIP implementations must not depend on
specific sorting orders for values.
3.7.3. The AbstractRequestType Type
All CT-KIP requests are defined as extensions to the abstract
AbstractRequestType type. The elements of the AbstractRequestType,
therefore, apply to all CT-KIP requests. All CT-KIP requests must
contain a Version attribute. For this version of this specification,
Version shall be set to "1.0".
Nystroem Informational PAGE 13
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
<xs:complexType name="AbstractRequestType" abstract="true">
<xs:attribute name="Version" type="VersionType"
use="required"/>
</xs:complexType>
3.7.4. The AbstractResponseType type
All CT-KIP responses are defined as extensions to the abstract
AbstractResponseType type. The elements of the AbstractResponseType,
therefore, apply to all CT-KIP responses. All CT-KIP responses
contain a Version attribute indicating the version that was used. A
Status attribute, which indicates whether the preceding request was
successful or not must also be present. Finally, all responses may
contain a SessionID attribute identifying the particular CT-KIP
session. The SessionID attribute needs only be present if more than
one roundtrip is required for a successful protocol run (this is the
case with the protocol version described herein).
<xs:complexType name="AbstractResponseType" abstract="true">
<xs:attribute name="Version" type="VersionType" use="required"/>
<xs:attribute name="SessionID" type="IdentifierType"/>
<xs:attribute name="Status" type="StatusCode" use="required"/>
</xs:complexType>
3.7.5. The StatusCode Type
The StatusCode type enumerates all possible return codes:
<xs:simpleType name="StatusCode">
<xs:restriction base="xs:string">
<xs:enumeration value="Continue"/>
<xs:enumeration value="Success"/>
<xs:enumeration value="Abort"/>
<xs:enumeration value="AccessDenied"/>
<xs:enumeration value="MalformedRequest"/>
<xs:enumeration value="UnknownRequest"/>
<xs:enumeration value="UnknownCriticalExtension"/>
<xs:enumeration value="UnsupportedVersion"/>
<xs:enumeration value="NoSupportedKeyTypes"/>
<xs:enumeration value="NoSupportedEncryptionAlgorithms"/>
<xs:enumeration value="NoSupportedMACAlgorithms"/>
<xs:enumeration value="InitializationFailed"/>
</xs:restriction>
</xs:simpleType>
Upon transmission or receipt of a message for which the Status
attribute's value is not "Success" or "Continue", the default
behavior, unless explicitly stated otherwise below, is that both the
Nystroem Informational PAGE 14
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
CT-KIP server and the CT-KIP client shall immediately terminate the
CT-KIP session. CT-KIP servers and CT-KIP clients must delete any
secret values generated as a result of failed runs of the CT-KIP
protocol. Session identifiers may be retained from successful or
failed protocol runs for replay detection purposes, but such retained
identifiers shall not be reused for subsequent runs of the protocol.
When possible, the CT-KIP client should present an appropriate error
message to the user.
These status codes are valid in all CT-KIP-Response messages unless
explicitly stated otherwise.
o "Continue" indicates that the CT-KIP server is ready for a
subsequent request from the CT-KIP client. It cannot be sent in
the server's final message.
o "Success" indicates successful completion of the CT-KIP session.
It can only be sent in the server's final message.
o "Abort" indicates that the CT-KIP server rejected the CT-KIP
client's request for unspecified reasons.
o "AccessDenied" indicates that the CT-KIP client is not authorized
to contact this CT-KIP server.
o "MalformedRequest" indicates that the CT-KIP server failed to
parse the CT-KIP client's request.
o "UnknownRequest" indicates that the CT-KIP client made a request
that is unknown to the CT-KIP server.
o "UnknownCriticalExtension" indicates that a critical CT-KIP
extension (see below) used by the CT-KIP client was not supported
or recognized by the CT-KIP server.
o "UnsupportedVersion" indicates that the CT-KIP client used a CT-
KIP protocol version not supported by the CT-KIP server. This
error is only valid in the CT-KIP server's first response message.
o "NoSupportedKeyTypes" indicates that the CT-KIP client only
suggested key types that are not supported by the CT-KIP server.
This error is only valid in the CT-KIP server's first response
message. Note that the error will only occur if the CT-KIP server
does not support any of the CT-KIP client's suggested key types.
Nystroem Informational PAGE 15
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
o "NoSupportedEncryptionAlgorithms" indicates that the CT-KIP client
only suggested encryption algorithms that are not supported by the
CT-KIP server. This error is only valid in the CT-KIP server's
first response message. Note that the error will only occur if
the CT-KIP server does not support any of the CT-KIP client's
suggested encryption algorithms.
o "NoSupportedMACAlgorithms" indicates that the CT-KIP client only
suggested MAC algorithms that are not supported by the CT-KIP
server. This error is only valid in the CT-KIP server's first
response message. Note that the error will only occur if the CT-
KIP server does not support any of the CT-KIP client's suggested
MAC algorithms.
o "InitializationFailed" indicates that the CT-KIP server could not
generate a valid key given the provided data. When this status
code is received, the CT-KIP client should try to restart CT-KIP,
as it is possible that a new run will succeed.
3.7.6. The IdentifierType Type
The IdentifierType type is used to identify various CT-KIP elements,
such as sessions, users, and services. Identifiers must not be
longer than 128 octets.
<xs:simpleType name="IdentifierType">
<xs:restriction base="xs:string">
<xs:maxLength value="128"/>
</xs:restriction>
</xs:simpleType>
3.7.7. The NonceType Type
The NonceType type is used to carry pseudorandom values in CT-KIP
messages. A nonce, as the name implies, must be used only once. For
each CT-KIP message that requires a nonce element to be sent, a fresh
nonce shall be generated each time. Nonce values must be at least 16
octets long.
<xs:simpleType name="NonceType">
<xs:restriction base="xs:base64Binary">
<xs:minLength value="16"/>
</xs:restriction>
</xs:simpleType>
Nystroem Informational PAGE 16
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
3.7.8. The ExtensionsType and the AbstractExtensionType Types
The ExtensionsType type is a list of type-value pairs that define
optional CT-KIP features supported by a CT-KIP client or server.
Extensions may be sent with any CT-KIP message. Please see the
description of individual CT-KIP messages in Section 3.8 of this
document for applicable extensions. Unless an extension is marked as
Critical, a receiving party need not be able to interpret it. A
receiving party is always free to disregard any (non-critical)
extensions.
<xs:complexType name="AbstractExtensionsType">
<xs:sequence maxOccurs="unbounded">
<xs:element name="Extension" type="AbstractExtensionType"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="AbstractExtensionType" abstract="true">
<xs:attribute name="Critical" type="xs:boolean"/>
</xs:complexType>
3.8. CT-KIP Messages
3.8.1. Introduction
In this section, CT-KIP messages, including their parameters,
encodings and semantics are defined.
3.8.2. CT-KIP Initialization
The CT-KIP server may initialize the CT-KIP protocol by sending a
<CT-KIPTrigger> message. This message may, e.g., be sent in response
to a user requesting token initialization in a browsing session.
<xs:complexType name="InitializationTriggerType">
<xs:sequence>
<xs:element name="TokenID" type="xs:base64Binary" minOccurs="0"/>
<xs:element name="KeyID" type="xs:base64Binary" minOccurs="0"/>
<xs:element name="TokenPlatformInfo"
type="TokenPlatformInfoType" minOccurs="0"/>
<xs:element name="TriggerNonce" type="NonceType"/>
<xs:element name="CT-KIPURL" type="xs:anyURI" minOccurs="0"/>
<xs:any namespace="##other" processContents="strict"
minOccurs="0"/>
</xs:sequence>
<xs:attribute name="id" type="xs:ID"/>
</xs:complexType>
Nystroem Informational PAGE 17
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
<xs:element name="CT-KIPTrigger" type="CT-KIPTriggerType"/>
<xs:complexType name="CT-KIPTriggerType">
<xs:annotation>
<xs:documentation xml:lang="en">
Message used to trigger the device to initiate a
CT-KIP run.
</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:choice>
<xs:element name="InitializationTrigger"
type="InitializationTriggerType"/>
<xs:any nameSpace="##other" processContents="strict"/>
</xs:choice>
</xs:sequence>
<xs:attribute name="Version" type="ct-kip:VersionType"/>
</xs:complexType>
The <CT-KIPTrigger> element is intended for the CT-KIP client and may
inform the CT-KIP client about the identifier for the token that is
to be initialized, and, optionally, of the identifier for the key on
that token. The latter would apply when re-seeding. The trigger
always contains a nonce to allow the server to couple the trigger
with a later CT-KIP <ClientHello> request. Finally, the trigger may
contain a URL to use when contacting the CT-KIP server. The <xs:any>
elements are for future extensibility. Any provided <TokenID> or
<KeyID> values shall be used by the CT-KIP client in the subsequent
<ClientHello> request. The optional <TokenPlatformInfo> element
informs the CT-KIP client about the characteristics of the intended
token platform, and applies in the public-key variant of CT-KIP in
situations when the client potentially needs to decide which one of
several tokens to initialize.
The Version attribute shall be set to "1.0" for this version of CT-
KIP.
3.8.3. The CT-KIP Client's Initial PDU
This message is the initial message sent from the CT-KIP client to
the CT-KIP server.
<xs:element name="ClientHello" type="ClientHelloPDU"/>
<xs:complexType name="ClientHelloPDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Message sent from CT-KIP client to CT-KIP server to
Nystroem Informational PAGE 18
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
initiate a CT-KIP session.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractRequestType">
<xs:sequence>
<xs:element name="TokenID"
type="xs:base64Binary" minOccurs="0"/>
<xs:element name="KeyID"
type="xs:base64Binary" minOccurs="0"/>
<xs:element name="ClientNonce"
type="NonceType" minOccurs="0"/>
<xs:element name= "TriggerNonce"
type="NonceType" minOccurs="0"/>
<xs:element name="SupportedKeyTypes"
type="AlgorithmsType"/>
<xs:element name="SupportedEncryptionAlgorithms"
type="AlgorithmsType"/>
<xs:element name="SupportedMACAlgorithms"
type="AlgorithmsType"/>
<xs:element name="Extensions"
type="ExtensionsType" minOccurs="0"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
The components of this message have the following meaning:
o Version: (attribute inherited from the AbstractRequestType type)
The highest version of this protocol the client supports. Only
version one ("1.0") is currently specified.
o <TokenID>: An identifier for the cryptographic token (allows the
server to find, e.g., a correct shared secret for MACing
purposes). The identifier shall only be present if such shared
secrets exist or if the identifier was provided by the server in a
<CT-KIPTrigger> element (see Section 4.2.7 below). In the latter
case, it must have the same value as the identifier provided in
that element.
o <KeyID>: An identifier for the key that will be overwritten if the
protocol run is successful. The identifier shall only be present
if the key exists or was provided by the server in a
<CT-KIPTrigger> element (see Section 4.2.7 below). In the latter
case, it must have the same value as the identifier provided in
that element.
Nystroem Informational PAGE 19
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
o <ClientNonce>: This is the nonce R, which, when present, shall be
used by the server when calculating MAC values (see below). It is
recommended that clients include this element whenever the <KeyID>
element is present.
o <TriggerNonce>: This optional element shall be present if and only
if the CT-KIP run was initialized with a <CT-KIPTrigger> message
(see Section 4.2.7 below), and shall, in that case, have the same
value as the <TriggerNonce> child of that message. A server using
nonces in this way must verify that the nonce is valid and that
any token or key identifier values provided in the <CT-KIPTrigger>
message match the corresponding identifier values in the
<ClientHello> message.
o <SupportedKeyTypes>: A sequence of URIs indicating the key types
for which the token is willing to generate keys through CT-KIP.
o <SupportedEncryptionAlgorithms>: A sequence of URIs indicating the
encryption algorithms supported by the cryptographic token for the
purposes of CT-KIP. The CT-KIP client may indicate the same
algorithm both as a supported key type and as an encryption
algorithm.
o <SupportedMACAlgorithms>: A sequence of URIs indicating the MAC
algorithms supported by the cryptographic token for the purposes
of CT-KIP. The CT-KIP client may indicate the same algorithm both
as an encryption algorithm and as a MAC algorithm (e.g., http://
www.rsasecurity.com/rsalabs/otps/schemas/2005/12/
ct-kip#ct-kip-prf-aes defined in Appendix D)
o <Extensions>: A sequence of extensions. One extension is defined
for this message in this version of CT-KIP: the ClientInfoType
(see Section 3.9.1).
3.8.4. The CT-KIP server's initial PDU
This message is the first message sent from the CT-KIP server to the
CT-KIP client (assuming a trigger message has not been sent to
initiate the protocol, in which case, this message is the second
message sent from the CT-KIP server to the CT-KIP client). It is
sent upon reception of a <ClientHello> message.
<xs:element name="ServerHello" type="ServerHelloPDU"/>
<xs:complexType name="ServerHelloPDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Message sent from CT-KIP server to CT-KIP
Nystroem Informational PAGE 20
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
client in response to a received ClientHello
PDU.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractResponseType">
<xs:sequence minOccurs="0">
<xs:element name="KeyType"
type="AlgorithmType"/>
<xs:element name="EncryptionAlgorithm"
type="AlgorithmType"/>
<xs:element name="MacAlgorithm"
type="AlgorithmType"/>
<xs:element name="EncryptionKey"
type="ds:KeyInfoType"/>
<xs:element name="Payload"
type="PayloadType"/>
<xs:element name="Extensions"
type="ExtensionsType" minOccurs="0"/>
<xs:element name="Mac" type="MacType"
minOccurs="0"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="PayloadType">
<xs:annotation>
<xs:documentation xml:lang="en">
Currently, only the nonce is defined. In future versions,
other payloads may be defined, e.g., for one-roundtrip
initialization protocols.
</xs:documentation>
</xs:annotation>
<xs:choice>
<xs:element name="Nonce" type="NonceType"/>
<any namespace="##other" processContents="strict"/>
</xs:choice>
</xs:complexType>
<xs:complexType name="MacType">
<xs:simpleContent>
<xs:extension base="xs:base64Binary">
<xs:attribute name="MacAlgorithm" type="xs:anyURI"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
Nystroem Informational PAGE 21
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
The components of this message have the following meaning:
o Version: (attribute inherited from the AbstractResponseType type)
The version selected by the CT-KIP server. May be lower than the
version indicated by the CT-KIP client, in which case, local
policy at the client will determine whether or not to continue the
session.
o SessionID: (attribute inherited from the AbstractResponseType
type) An identifier for this session.
o Status: (attribute inherited from the abstract
AbstractResponseType type) Return code for the <ClientHello>. If
Status is not "Continue", only the Status and Version attributes
will be present; otherwise, all the other elements must be present
as well.
o <KeyType>: The type of the key to be generated.
o <EncryptionAlgorithm>: The encryption algorithm to use when
protecting R_C.
o <MacAlgorithm>: The MAC algorithm to be used by the CT-KIP server.
o <EncryptionKey>: Information about the key to use when encrypting
R_C. It will either be the server's public key (the <ds:KeyValue>
alternative of ds:KeyInfoType) or an identifier for a shared
secret key (the <ds:KeyName> alternative of ds:KeyInfoType).
o <Payload>: The actual payload. For this version of the protocol,
only one payload is defined: the pseudorandom string R_S.
o <Extensions>: A list of server extensions. Two extensions are
defined for this message in this version of CT-KIP: the
ClientInfoType and the ServerInfoType (see Section 3.9).
o <Mac>: The MAC must be present if the CT-KIP run will result in
the replacement of an existing token key with a new one (i.e., if
the <KeyID> element was present in the <ClientHello> message). In
this case, the CT-KIP server must prove to the cryptographic token
that it is authorized to replace it. The MAC value shall be
computed on the (ASCII) string "MAC 1 computation", the client's
nonce R (if sent), and the server's nonce R_S using an
authentication key K_AUTH that should be a special authentication
key used only for this purpose but may be the current K_TOKEN.
Nystroem Informational PAGE 22
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
The MAC value may be computed by using the CT-KIP-PRF function of
Section 3.4, in which case the input parameter s shall be set to
the concatenation of the (ASCII) string "MAC 1 computation", R (if
sent by the client), and R_S, and k shall be set to K_AUTH. The
input parameter dsLen shall be set to the length of R_S:
dsLen = len(R_S)
MAC = CT-KIP-PRF (K_AUTH, "MAC 1 computation" || [R ||] R_S,
dsLen)
The CT-KIP client must verify the MAC if the successful execution
of the protocol will result in the replacement of an existing
token key with a newly generated one. The CT-KIP client must
terminate the CT-KIP session if the MAC does not verify, and must
delete any nonces, keys, and/or secrets associated with the failed
run of the CT-KIP protocol.
The MacType's MacAlgorithm attribute shall, when present, identify
the negotiated MAC algorithm.
3.8.5. The CT-KIP Client's Second PDU
This message contains the nonce chosen by the cryptographic token,
R_C, encrypted by the specified encryption key and encryption
algorithm.
<xs:element name="ClientNonce" type="ClientNoncePDU"/>
<xs:complexType name="ClientNoncePDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Second message sent from CT-KIP client to
CT-KIP server in a CT-KIP session.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractRequestType">
<xs:sequence>
<xs:element name="EncryptedNonce"
type="xs:base64Binary"/>
<xs:element name="Extensions"
type="ExtensionsType" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="SessionID" type="IdentifierType"
use="required"/>
</xs:extension>
</xs:complexContent>
Nystroem Informational PAGE 23
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</xs:complexType>
The components of this message have the following meaning:
o Version: (inherited from the AbstractRequestType type) Shall be
the same version as in the <ServerHello> message.
o SessionID: Shall have the same value as the SessionID attribute in
the received <ServerHello> message.
o <EncryptedNonce>: The nonce generated and encrypted by the token.
The encryption shall be made using the selected encryption
algorithm and identified key, and as specified in Section 3.4.
o <Extensions>: A list of extensions. Two extensions are defined
for this message in this version of CT-KIP: the ClientInfoType and
the ServerInfoType (see Section 3.9).
3.8.6. The CT-KIP Server's Final PDU
This message is the last message of a two roundtrip CT-KIP exchange.
The CT-KIP server sends this message to the CT-KIP client in response
to the <ClientNonce> message.
<xs:element name="ServerFinished" type="ServerFinishedPDU"/>
<xs:complexType name="ServerFinishedPDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Final message sent from CT-KIP server to
CT-KIP client in a CT-KIP session.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractResponseType">
<xs:sequence minOccurs="0">
<xs:element name="TokenID"
type="xs:base64Binary"/>
<xs:element name="KeyID"
type="xs:base64Binary"/>
<xs:element name="KeyExpiryDate"
type="xs:dateTime" minOccurs="0"/>
<xs:element name="ServiceID"
type="IdentifierType" minOccurs="0"/>
<xs:element name="ServiceLogo"
type="LogoType" minOccurs="0"/>
<xs:element name="UserID"
type="IdentifierType" minOccurs="0"/>
Nystroem Informational PAGE 24
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
<xs:element name="Extensions"
type="ExtensionsType" minOccurs="0"/>
<xs:element name="Mac"
type="MacType"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
The components of this message have the following meaning:
o Version: (inherited from the AbstractResponseType type) The CT-KIP
version used in this session.
o SessionID: (inherited from the AbstractResponseType type) The
previously established identifier for this session.
o Status: (inherited from the AbstractResponseType type) Return code
for the <ServerFinished> message. If Status is not "Success",
only the Status, SessionID, and Version attributes will be present
(the presence of the SessionID attribute is dependent on the type
of reported error); otherwise, all the other elements must be
present as well. In this latter case, the <ServerFinished>
message can be seen as a "Commit" message, instructing the
cryptographic token to store the generated key and associate the
given key identifier with this key.
o <TokenID>: An identifier for the token carrying the generated key.
Must have the same value as the <TokenID> element of the
<ClientHello> message, if one was provided. When assigned by the
CT-KIP server, the <TokenID> element shall be unique within the
domain of the CT-KIP server.
o <KeyID>: An identifier for the newly generated key. The
identifier shall be globally unique. Must have the same value as
any key identifier provided by the CT-KIP client in the
<ClientHello> message.
The reason for requiring globally unique key identifiers is that
it avoids potential conflicts when associating key holders with
key identifiers. One way of achieving global uniqueness with
reasonable certainty is to hash the combination of the issuer's
fully qualified domain name with an (issuer-specific) serial
number, assuming that each issuer makes sure their serial numbers
never repeat.
Nystroem Informational PAGE 25
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
CT-KIP clients must support key identifiers at least 64 octets
long. CT-KIP servers should not generate key identifiers longer
than 64 octets.
o <KeyExpiryDate>: This optional element provides the date and time
after which the generated key should be treated as expired and
invalid.
o <ServiceID>: An optional identifier for the service that has
stored the generated key. The cryptographic token may store this
identifier associated with the key in order to simplify later
lookups. The identifier shall be a printable string.
o <ServiceLogo>: This optional element provides a graphical logo
image for the service that can be displayed in user interfaces,
e.g., to help a user select a certain key. The logo should
contain an image within the size range of 60 pixels wide by 45
pixels high, and 200 pixels wide by 150 pixels high. The required
MimeType attribute of this type provides information about the
MIME type of the image. This specification supports both the JPEG
and GIF image formats (with MIME types of "image/jpeg" and "image/
gif").
o <UserID>: An optional identifier for the user associated with the
generated key in the authentication service. The cryptographic
token may store this identifier associated with the generated key
in order to enhance later user experiences. The identifier shall
be a printable string.
o <Extensions>: A list of extensions chosen by the CT-KIP server.
For this message, this version of CT-KIP defines two extensions,
the OTPKeyConfigurationDataType and the ClientInfoType (see
Section 3.9).
o <Mac>: To avoid a false "Commit" message causing the token to end
up in an initialized state for which the server does not know the
stored key, <ServerFinished> messages must always be authenticated
with a MAC. The MAC shall be made using the already established
MAC algorithm. The MAC value shall be computed on the (ASCII)
string "MAC 2 computation" and R_C using an authentication key
K_AUTH. Again, this should be a special authentication key used
only for this purpose, but may also be an existing K_TOKEN. (In
this case, implementations must protect against attacks where
K_TOKEN is used to pre-compute MAC values.) If no authentication
key is present in the token, and no K_TOKEN existed before the CT-
KIP run, K_AUTH shall be the newly generated K_TOKEN.
Nystroem Informational PAGE 26
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
If CT-KIP-PRF is used as the MAC algorithm, then the input
parameter s shall consist of the concatenation of the (ASCII)
string "MAC 2 computation" and R_C, and the parameter dsLen shall
be set to the length of R_C:
dsLen = len(R_C)
MAC = CT-KIP-PRF (K_AUTH, "MAC 2 computation" || R_C, dsLen)
When receiving a <ServerFinished> message with Status = "Success"
for which the MAC verifies, the CT-KIP client shall associate the
generated key K_TOKEN with the provided key identifier and store
this data permanently. After this operation, it shall not be
possible to overwrite the key unless knowledge of an authorizing
key is proven through a MAC on a later <ServerHello> (and
<ServerFinished>) message.
The CT-KIP client must verify the MAC. The CT-KIP client must
terminate the CT-KIP session if the MAC does not verify, and must,
in this case, also delete any nonces, keys, and/or secrets
associated with the failed run of the CT-KIP protocol.
The MacType's MacAlgorithm attribute shall, when present, identify
the negotiated MAC algorithm.
3.9. Protocol Extensions
3.9.1. The ClientInfoType Type
When present in a <ClientHello> or a <ClientNonce> message, the
optional ClientInfoType extension contains CT-KIP client-specific
information. CT-KIP servers must support this extension. CT-KIP
servers must not attempt to interpret the data it carries and, if
received, must include it unmodified in the current protocol run's
next server response. Servers need not retain the ClientInfoType's
data after that response has been generated.
<xs:complexType name="ClientInfoType">
<xs:complexContent>
<xs:extension base="AbstractExtensionType">
<xs:sequence>
<xs:element name="Data"
type="xs:base64Binary"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
Nystroem Informational PAGE 27
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
3.9.2. The ServerInfoType Type
When present, the optional ServerInfoType extension contains CT-KIP
server-specific information. This extension is only valid in
<ServerHello> messages for which Status = "Continue". CT-KIP clients
must support this extension. CT-KIP clients must not attempt to
interpret the data it carries and, if received, must include it
unmodified in the current protocol run's next client request (i.e.,
the <ClientNonce> message). CT-KIP clients need not retain the
ServerInfoType's data after that request has been generated. This
extension may be used, e.g., for state management in the CT-KIP
server.
<xs:complexType name="ServerInfoType">
<xs:complexContent>
<xs:extension base="AbstractExtensionType">
<xs:sequence>
<xs:element name="Data"
type="xs:base64Binary"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
3.9.3. The OTPKeyConfigurationDataType Type
The optional OTPKeyConfigurationDataType extension contains
additional key configuration data for OTP keys:
<xs:complexType name="OTPKeyConfigurationDataType">
<xs:annotation>
<xs:documentation xml:lang="en">
This extension is only valid in ServerFinished
PDUs. It carries additional configuration data
that an OTP token should use (subject to local
policy) when generating OTP values with a newly
generated OTP key.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="ExtensionType">
<xs:sequence>
<xs:element name="OTPFormat"
type="OTPFormatType"/>
<xs:element name="OTPLength"
type="xs:positiveInteger"/>
<xs:element name="OTPMode"
type="OTPModeType" minOccurs="0"/>
Nystroem Informational PAGE 28
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
This extension is only valid in <ServerFinished> messages. It
carries additional configuration data that the cryptographic token
should use (subject to local policy) when generating OTP values from
the newly generated OTP key. The components of this extension have
the following meaning:
o OTPFormat: The default format of OTPs produced with this key.
o OTPLength: The default length of OTPs produced with this key.
o OTPMode: The default mode of operation when producing OTPs with
this key.
4. Protocol Bindings
4.1. General Requirement
CT-KIP assumes a reliable transport.
4.2. HTTP/1.1 binding for CT-KIP
4.2.1. Introduction
This section presents a binding of the previous messages to HTTP/1.1
[7]. Note that the HTTP client normally will be different from the
CT-KIP client, i.e., the HTTP client will only exist to "proxy" CT-
KIP messages from the CT-KIP client to the CT-KIP server. Likewise,
on the HTTP server side, the CT-KIP server may receive CT-KIP PDUs
from a "front-end" HTTP server.
4.2.2. Identification of CT-KIP Messages
The MIME-type for all CT-KIP messages shall be
application/vnd.otps.ct-kip+xml
4.2.3. HTTP Headers
HTTP proxies must not cache responses carrying CT-KIP messages. For
this reason, the following holds:
Nystroem Informational PAGE 29
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
o When using HTTP/1.1, requesters should:
* Include a Cache-Control header field set to "no-cache,
no-store".
* Include a Pragma header field set to "no-cache".
o When using HTTP/1.1, responders should:
* Include a Cache-Control header field set to "no-cache,
no-must-revalidate, private".
* Include a Pragma header field set to "no-cache".
* NOT include a Validator, such as a Last-Modified or ETag
header.
There are no other restrictions on HTTP headers, besides the
requirement to set the Content-Type header value to application/
vnd.otps.ct-kip+xml.
4.2.4. HTTP Operations
Persistent connections as defined in HTTP/1.1 are assumed but not
required. CT-KIP requests are mapped to HTTP POST operations. CT-
KIP responses are mapped to HTTP responses.
4.2.5. HTTP Status Codes
A CT-KIP HTTP responder that refuses to perform a message exchange
with a CT-KIP HTTP requester should return a 403 (Forbidden)
response. In this case, the content of the HTTP body is not
significant. In the case of an HTTP error while processing a CT-KIP
request, the HTTP server must return a 500 (Internal Server Error)
response. This type of error should be returned for HTTP-related
errors detected before control is passed to the CT-KIP processor, or
when the CT-KIP processor reports an internal error (for example, the
CT-KIP XML namespace is incorrect, or the CT-KIP schema cannot be
located). If the type of a CT-KIP request cannot be determined, the
CT-KIP responder must return a 400 (Bad request) response.
In these cases (i.e., when the HTTP response code is 4xx or 5xx), the
content of the HTTP body is not significant.
Redirection status codes (3xx) apply as usual.
Nystroem Informational PAGE 30
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
Whenever the HTTP POST is successfully invoked, the CT-KIP HTTP
responder must use the 200 status code and provide a suitable CT-KIP
message (possibly with CT-KIP error information included) in the HTTP
body.
4.2.6. HTTP Authentication
No support for HTTP/1.1 authentication is assumed.
4.2.7. Initialization of CT-KIP
The CT-KIP server may initialize the CT-KIP protocol by sending an
HTTP response with Content-Type set to application/
vnd.otps.ct-kip+xml and response code set to 200 (OK). This message
may, e.g., be sent in response to a user requesting token
initialization in a browsing session. The initialization message may
carry data in its body. If this is the case, the data shall be a
valid instance of a <CT-KIPTrigger> element.
4.2.8. Example Messages
a. Initialization from CT-KIP server:
HTTP/1.1 200 OK
Cache-Control: no-store
Content-Type: application/vnd.otps.ct-kip+xml
Content-Length: <some value>
CT-KIP initialization data in XML form...
b. Initial request from CT-KIP client:
POST http://example.com/cgi-bin/CT-KIP-server HTTP/1.1
Cache-Control: no-store
Pragma: no-cache
Host: example.com
Content-Type: application/vnd.otps.ct-kip+xml
Content-Length: <some value>
CT-KIP data in XML form (supported version, supported algorithms...)
Nystroem Informational PAGE 31
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
c. Initial response from CT-KIP server:
HTTP/1.1 200 OK
Cache-Control: no-store
Content-Type: application/vnd.otps.ct-kip+xml
Content-Length: <some other value>
CT-KIP data in XML form (server random nonce, server public key, ...)
5. Security considerations
5.1. General
CT-KIP is designed to protect generated key material from exposure.
No other entities than the CT-KIP server and the cryptographic token
will have access to a generated K_TOKEN if the cryptographic
algorithms used are of sufficient strength and, on the CT-KIP client
side, generation and encryption of R_C and generation of K_TOKEN take
place as specified and in the token. This applies even if malicious
software is present in the CT-KIP client. However, as discussed in
the following, CT-KIP does not protect against certain other threats
resulting from man-in-the-middle attacks and other forms of attacks.
CT-KIP should, therefore, be run over a transport providing privacy
and integrity, such as HTTP over Transport Layer Security (TLS) with
a suitable ciphersuite, when such threats are a concern. Note that
TLS ciphersuites with anonymous key exchanges are not suitable in
those situations.
5.2. Active Attacks
5.2.1. Introduction
An active attacker may attempt to modify, delete, insert, replay or
reorder messages for a variety of purposes including service denial
and compromise of generated key material. Sections 5.2.2 through
5.2.7 analyze these attack scenarios.
5.2.2. Message Modifications
Modifications to a <CT-KIPTrigger> message will either cause denial-
of-service (modifications of any of the identifiers or the nonce) or
the CT-KIP client to contact the wrong CT-KIP server. The latter is
in effect a man-in-the-middle attack and is discussed further in
Section 5.2.7.
An attacker may modify a <ClientHello> message. This means that the
attacker could indicate a different key or token than the one
intended by the CT-KIP client, and could also suggest other
Nystroem Informational PAGE 32
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
cryptographic algorithms than the ones preferred by the CT-KIP
client, e.g., cryptographically weaker ones. The attacker could also
suggest earlier versions of the CT-KIP protocol, in case these
versions have been shown to have vulnerabilities. These
modifications could lead to an attacker succeeding in initializing or
modifying another token than the one intended (i.e., the server
assigning the generated key to the wrong token), or gaining access to
a generated key through the use of weak cryptographic algorithms or
protocol versions. CT-KIP implementations may protect against the
latter by having strict policies about what versions and algorithms
they support and accept. The former threat (assignment of a
generated key to the wrong token) is not possible when the shared-key
variant of CT-KIP is employed (assuming existing shared keys are
unique per token) but is possible in the public-key variant.
Therefore, CT-KIP servers must not accept unilaterally provided token
identifiers in the public-key variant. This is also indicated in the
protocol description. In the shared-key variant, however, an
attacker may be able to provide the wrong identifier (possibly also
leading to the incorrect user being associated with the generated
key) if the attacker has real-time access to the token with the
identified key. In other words, the generated key is associated with
the correct token but the token is associated with the incorrect
user. See further Section 5.5 for a discussion of this threat and
possible countermeasures.
An attacker may also modify a <ServerHello> message. This means that
the attacker could indicate different key types, algorithms, or
protocol versions than the legitimate server would, e.g.,
cryptographically weaker ones. The attacker could also provide a
different nonce than the one sent by the legitimate server. Clients
will protect against the former through strict adherence to policies
regarding permissible algorithms and protocol versions. The latter
(wrong nonce) will not constitute a security problem, as a generated
key will not match the key generated on the legitimate server. Also,
whenever the CT-KIP run would result in the replacement of an
existing key, the <Mac> element protects against modifications of
R_S.
Modifications of <ClientNonce> messages are also possible. If an
attacker modifies the SessionID attribute, then, in effect, a switch
to another session will occur at the server, assuming the new
SessionID is valid at that time on the server. It still will not
allow the attacker to learn a generated K_TOKEN since R_C has been
wrapped for the legitimate server. Modifications of the
<EncryptedNonce> element, e.g., replacing it with a value for which
the attacker knows an underlying R'C, will not result in the client
changing its pre-CT-KIP state, since the server will be unable to
provide a valid MAC in its final message to the client. The server
Nystroem Informational PAGE 33
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
may, however, end up storing K'TOKEN rather than K_TOKEN. If the
token has been associated with a particular user, then this could
constitute a security problem. For a further discussion about this
threat, and a possible countermeasure, see Section 5.5 below. Note
that use of Secure Socket Layer (SSL) or TLS does not protect against
this attack if the attacker has access to the CT-KIP client (e.g.,
through malicious software, "trojans").
Finally, attackers may also modify the <ServerFinished> message.
Replacing the <Mac> element will only result in denial-of-service.
Replacement of any other element may cause the CT-KIP client to
associate, e.g., the wrong service with the generated key. CT-KIP
should be run over a transport providing privacy and integrity when
this is a concern.
5.2.3. Message Deletion
Message deletion will not cause any other harm than denial-of-
service, since a token shall not change its state (i.e., "commit" to
a generated key) until it receives the final message from the CT-KIP
server and successfully has processed that message, including
validation of its MAC. A deleted <ServerFinished> message will not
cause the server to end up in an inconsistent state vis-a-vis the
token if the server implements the suggestions in Section 5.5.
5.2.4. Message Insertion
An active attacker may initiate a CT-KIP run at any time, and suggest
any token identifier. CT-KIP server implementations may receive some
protection against inadvertently initializing a token or
inadvertently replacing an existing key or assigning a key to a token
by initializing the CT-KIP run by use of the <CT-KIPTrigger>. The
<TriggerNonce> element allows the server to associate a CT-KIP
protocol run with, e.g., an earlier user-authenticated session. The
security of this method, therefore, depends on the ability to protect
the <TriggerNonce> element in the CT-KIP initialization message. If
an eavesdropper is able to capture this message, he may race the
legitimate user for a key initialization. CT-KIP over a transport
providing privacy and integrity, coupled with the recommendations in
Section 5.5, is recommended when this is a concern.
Insertion of other messages into an existing protocol run is seen as
equivalent to modification of legitimately sent messages.
5.2.5. Message Replay
Attempts to replay a previously recorded CT-KIP message will be
detected, as the use of nonces ensures that both parties are live.
Nystroem Informational PAGE 34
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
5.2.6. Message Reordering
An attacker may attempt to re-order messages but this will be
detected, as each message is of a unique type.
5.2.7. Man in the Middle
In addition to other active attacks, an attacker posing as a man in
the middle may be able to provide his own public key to the CT-KIP
client. This threat and countermeasures to it are discussed in
Section 3.3. An attacker posing as a man-in-the-middle may also be
acting as a proxy and, hence, may not interfere with CT-KIP runs but
still learn valuable information; see Section 5.3.
5.3. Passive Attacks
Passive attackers may eavesdrop on CT-KIP runs to learn information
that later on may be used to impersonate users, mount active attacks,
etc.
If CT-KIP is not run over a transport providing privacy, a passive
attacker may learn:
o What tokens a particular user is in possession of;
o The identifiers of keys on those tokens and other attributes
pertaining to those keys, e.g., the lifetime of the keys; and
o CT-KIP versions and cryptographic algorithms supported by a
particular CT-KIP client or server.
Whenever the above is a concern, CT-KIP should be run over a
transport providing privacy. If man-in-the-middle attacks for the
purposes described above are a concern, the transport should also
offer server-side authentication.
5.4. Cryptographic Attacks
An attacker with unlimited access to an initialized token may use the
token as an "oracle" to pre-compute values that later on may be used
to impersonate the CT-KIP server. Sections 3.6 and 3.8 contain
discussions of this threat and steps recommended to protect against
it.
Nystroem Informational PAGE 35
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
5.5. Attacks on the Interaction between CT-KIP and User Authentication
If keys generated in CT-KIP will be associated with a particular user
at the CT-KIP server (or a server trusted by, and communicating with
the CT-KIP server), then in order to protect against threats where an
attacker replaces a client-provided encrypted R_C with his own R'C
(regardless of whether the public-key variant or the shared-secret
variant of CT-KIP is employed to encrypt the client nonce), the
server should not commit to associate a generated K_TOKEN with the
given token (user) until the user simultaneously has proven both
possession of a token containing K_TOKEN and some out-of-band
provided authenticating information (e.g., a temporary password).
For example, if the token is a one-time password token, the user
could be required to authenticate with both a one-time password
generated by the token and an out-of-band provided temporary PIN in
order to have the server "commit" to the generated token value for
the given user. Preferably, the user should perform this operation
from another host than the one used to initialize the token, in order
to minimize the risk of malicious software on the client interfering
with the process.
Another threat arises when an attacker is able to trick a user to
authenticate to the attacker rather than to the legitimate service
before the CT-KIP protocol run. If successful, the attacker will
then be able to impersonate the user towards the legitimate service,
and subsequently receive a valid CT-KIP trigger. If the public-key
variant of CT-KIP is used, this may result in the attacker being able
to (after a successful CT-KIP protocol run) impersonate the user.
Ordinary precautions must, therefore, be in place to ensure that
users authenticate only to legitimate services.
6. Intellectual Property Considerations
RSA and SecurID are registered trademarks or trademarks of RSA
Security Inc. in the United States and/or other countries. The names
of other products and services mentioned may be the trademarks of
their respective owners.
Nystroem Informational PAGE 36
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
7. References
7.1. Normative References
[1] Davis, M. and M. Duerst, "Unicode Normalization Forms",
March 2001,
<http://www.unicode.org/unicode/reports/tr15/tr15-21.html>.
7.2. Informative References
[2] RSA Laboratories, "PKCS #11 Mechanisms for the Cryptographic
Token Key Initialization Protocol", PKCS #11 Version 2.20
Amendment 2, December 2005, <ftp://ftp.rsasecurity.com/pub/
pkcs/pkcs-11/v2-20/pkcs-11v2-20a2.pdf>.
[3] RSA Laboratories, "Cryptographic Token Interface Standard",
PKCS #11 Version 2.20, June 2004, <ftp://ftp.rsasecurity.com/
pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf>.
[4] RSA Laboratories, "Frequently Asked Questions About Today's
Cryptography. Version 4.1", 2000, <http://www.rsasecurity.com/
rsalabs/faq/files/rsalabs_faq41.pdf>.
[5] RSA Laboratories, "Password-Based Cryptography Standard",
PKCS #5 Version 2.0, March 1999,
<ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-5v2/pkcs5v2-0.pdf>.
[6] RSA Laboratories, "RSA Cryptography Standard", PKCS #1 Version
2.1, June 2002,
<ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-1/pkcs-1v2-1.pdf>.
[7] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L.,
Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol --
HTTP/1.1", RFC 2616, June 1999.
[8] National Institute of Standards and Technology, "Specification
for the Advanced Encryption Standard (AES)", FIPS 197,
November 2001,
<http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf>.
[9] Krawzcyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-Hashing
for Message Authentication", RFC 2104, February 1997.
[10] Iwata, T. and K. Kurosawa, "OMAC: One-Key CBC MAC. In Fast
Software Encryption, FSE 2003, pages 129 - 153.
Springer-Verlag", 2003,
<http://crypt.cis.ibaraki.ac.jp/omac/docs/omac.pdf>.
Nystroem Informational PAGE 37
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
[11] National Institute of Standards and Technology, "Secure Hash
Standard", FIPS 197, February 2004, <http://csrc.nist.gov/
publications/fips/fips180-2/fips180-2withchangenotice.pdf>.
[12] RSA Laboratories, "Cryptographic Token Key Initialization
Protocol", OTPS Version 1.0, December 2005,
<ftp://ftp.rsasecurity.com/pub/otps/ct-kip/ct-kip-v1-0.pdf>.
Nystroem Informational PAGE 38
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
Appendix A. CT-KIP Schema
<xs:schema
targetNamespace=
"http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/ct-kip#"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:ds="http://www.w3.org/2000/09/xmldsig#"
xmlns=
"http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/ct-kip#">
<xs:import namespace="http://www.w3.org/2000/09/xmldsig#"
schemaLocation=
"http://www.w3.org/TR/2002/REC-xmldsig-core-20020212/
xmldsig-core-schema.xsd"/>
<!-- Basic types -->
<xs:complexType name="AbstractRequestType" abstract="true">
<xs:attribute name="Version" type="VersionType" use="required"/>
</xs:complexType>
<xs:complexType name="AbstractResponseType" abstract="true">
<xs:attribute name="Version" type="VersionType" use="required"/>
<xs:attribute name="SessionID" type="IdentifierType"/>
<xs:attribute name="Status" type="StatusCode" use="required"/>
</xs:complexType>
<xs:simpleType name="StatusCode">
<xs:restriction base="xs:string">
<xs:enumeration value="Continue"/>
<xs:enumeration value="Success"/>
<xs:enumeration value="Abort"/>
<xs:enumeration value="AccessDenied"/>
<xs:enumeration value="MalformedRequest"/>
<xs:enumeration value="UnknownRequest"/>
<xs:enumeration value="UnknownCriticalExtension"/>
<xs:enumeration value="UnsupportedVersion"/>
<xs:enumeration value="NoSupportedKeyTypes"/>
<xs:enumeration value="NoSupportedEncryptionAlgorithms"/>
<xs:enumeration value="NoSupportedMACAlgorithms"/>
<xs:enumeration value="InitializationFailed"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="VersionType">
<xs:restriction base="xs:string">
<xs:pattern value="\d{1,2}\.\d{1,3}"/>
</xs:restriction>
Nystroem Informational PAGE 39
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</xs:simpleType>
<xs:simpleType name="IdentifierType">
<xs:restriction base="xs:string">
<xs:maxLength value="128"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="NonceType">
<xs:restriction base="xs:base64Binary">
<xs:length value="16"/>
</xs:restriction>
</xs:simpleType>
<xs:complexType name="LogoType">
<xs:simpleContent>
<xs:extension base="xs:base64Binary">
<xs:attribute name="MimeType" type="MimeTypeType"
use="required"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<xs:simpleType name="MimeTypeType">
<xs:restriction base="xs:string">
<xs:enumeration value="image/jpeg"/>
<xs:enumeration value="image/gif"/>
</xs:restriction>
</xs:simpleType>
<!-- Algorithms are identified through URIs -->
<xs:complexType name="AlgorithmsType">
<xs:sequence maxOccurs="unbounded">
<xs:element name="Algorithm" type="AlgorithmType"/>
</xs:sequence>
</xs:complexType>
<xs:simpleType name="AlgorithmType">
<xs:restriction base="xs:anyURI"/>
</xs:simpleType>
<xs:complexType name="MacType">
<xs:simpleContent>
<xs:extension base="xs:base64Binary">
<xs:attribute name="MacAlgorithm"
type="xs:anyURI"/>
</xs:extension>
</xs:simpleContent>
Nystroem Informational PAGE 40
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</xs:complexType>
<!-- CT-KIP extensions (for future use) -->
<xs:complexType name="ExtensionsType">
<xs:sequence maxOccurs="unbounded">
<xs:element name="Extension" type="AbstractExtensionType"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="AbstractExtensionType" abstract="true">
<xs:attribute name="Critical" type="xs:boolean"/>
</xs:complexType>
<xs:complexType name="ClientInfoType">
<xs:complexContent>
<xs:extension base="AbstractExtensionType">
<xs:sequence>
<xs:element name="Data" type="xs:base64Binary"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="ServerInfoType">
<xs:complexContent>
<xs:extension base="AbstractExtensionType">
<xs:sequence>
<xs:element name="Data" type="xs:base64Binary"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="OTPKeyConfigurationDataType">
<xs:annotation>
<xs:documentation xml:lang="en">
This extension is only valid in ServerFinished PDUs. It
carries additional configuration data that an OTP token should
use (subject to local policy) when generating OTP values from a
newly generated OTP key.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractExtensionType">
<xs:sequence>
<xs:element name="OTPFormat" type="OTPFormatType"/>
<xs:element name="OTPLength" type="xs:positiveInteger"/>
<xs:element name="OTPMode" type="OTPModeType" minOccurs="0"/>
Nystroem Informational PAGE 41
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:simpleType name="OTPFormatType">
<xs:restriction base="xs:string">
<xs:enumeration value="Decimal"/>
<xs:enumeration value="Hexadecimal"/>
<xs:enumeration value="Alphanumeric"/>
<xs:enumeration value="Binary"/>
</xs:restriction>
</xs:simpleType>
<xs:complexType name="OTPModeType">
<xs:choice maxOccurs="unbounded">
<xs:element name="Time" type="TimeType"/>
<xs:element name="Counter"/>
<xs:element name="Challenge"/>
<xs:any namespace="##other" processContents="strict"/>
</xs:choice>
</xs:complexType>
<xs:complexType name="TimeType">
<xs:complexContent>
<xs:restriction base="xs:anyType">
<xs:attribute name="TimeInterval" type="xs:positiveInteger"/>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="PayloadType">
<xs:annotation>
<xs:documentation xml:lang="en">
</xs:documentation>
</xs:annotation>
<xs:choice>
<xs:element name="Nonce" type="NonceType"/>
<xs:any namespace="##other" processContents="strict"/>
</xs:choice>
</xs:complexType>
<xs:simpleType name="PlatformType">
<xs:restriction base="xs:string">
<xs:enumeration value="Hardware"/>
<xs:enumeration value="Software"/>
<xs:enumeration value="Unspecified"/>
</xs:restriction>
Nystroem Informational PAGE 42
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</xs:simpleType>
<xs:complexType name="TokenPlatformInfoType">
<xs:annotation>
<xs:documentation xml:lang="en">
Carries token platform information helping the client to select
a suitable token.
</xs:documentation>
</xs:annotation>
<xs:attribute name="KeyLocation" type="PlatformType"/>
<xs:attribute name="AlgorithmLocation" type="PlatformType"/>
</xs:complexType>
<xs:complexType name="InitializationTriggerType">
<xs:sequence>
<xs:element name="TokenID" type="xs:base64Binary" minOccurs="0"/>
<xs:element name="KeyID" type="xs:base64Binary" minOccurs="0"/>
<xs:element name="TokenPlatformInfo" type="TokenPlatformInfoType"
minOccurs="0"/>
<xs:element name="TriggerNonce" type="NonceType"/>
<xs:element name="CT-KIPURL" type="xs:anyURI" minOccurs="0"/>
<xs:any namespace="##other" processContents="strict"
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<!-- CT-KIP PDUs -->
<!-- CT-KIP trigger -->
<xs:element name="CT-KIPTrigger" type="CT-KIPTriggerType"/>
<xs:complexType name="CT-KIPTriggerType">
<xs:annotation>
<xs:documentation xml:lang="en">
Message used to trigger the device to initiate a CT-KIP run.
</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:choice>
<xs:element name="InitializationTrigger"
type="InitializationTriggerType"/>
<xs:any namespace="##other" processContents="strict"/>
</xs:choice>
</xs:sequence>
<xs:attribute name="Version" type="VersionType"/>
</xs:complexType>
<!-- ClientHello PDU -->
Nystroem Informational PAGE 43
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
<xs:element name="ClientHello" type="ClientHelloPDU"/>
<xs:complexType name="ClientHelloPDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Message sent from CT-KIP client to CT-KIP server to initiate an
CT-KIP session.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractRequestType">
<xs:sequence>
<xs:element name="TokenID" type="xs:base64Binary"
minOccurs="0"/>
<xs:element name="KeyID" type="xs:base64Binary"
minOccurs="0"/>
<xs:element name="ClientNonce" type="NonceType"
minOccurs="0"/>
<xs:element name="TriggerNonce" type="NonceType"
minOccurs="0"/>
<xs:element name="SupportedKeyTypes" type="AlgorithmsType"/>
<xs:element name="SupportedEncryptionAlgorithms"
type="AlgorithmsType"/>
<xs:element name="SupportedMACAlgorithms"
type="AlgorithmsType"/>
<xs:element name="Extensions" type="ExtensionsType"
minOccurs="0"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- ServerHello PDU -->
<xs:element name="ServerHello" type="ServerHelloPDU"/>
<xs:complexType name="ServerHelloPDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Message sent from CT-KIP server to CT-KIP client in response to
a received ClientHello PDU.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractResponseType">
<xs:sequence minOccurs="0">
<xs:element name="KeyType" type="AlgorithmType"/>
<xs:element name="EncryptionAlgorithm" type="AlgorithmType"/>
<xs:element name="MacAlgorithm" type="AlgorithmType"/>
Nystroem Informational PAGE 44
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
<xs:element name="EncryptionKey" type="ds:KeyInfoType"/>
<xs:element name="Payload" type="PayloadType"/>
<xs:element name="Extensions" type="ExtensionsType"
minOccurs="0"/>
<xs:element name="Mac" type="MacType" minOccurs="0"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- ClientNonce PDU -->
<xs:element name="ClientNonce" type="ClientNoncePDU"/>
<xs:complexType name="ClientNoncePDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Second message sent from CT-KIP client to CT-KIP server to
convey the client's chosen secret.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractRequestType">
<xs:sequence>
<xs:element name="EncryptedNonce" type="xs:base64Binary"/>
<xs:element name="Extensions" type="ExtensionsType"
minOccurs="0"/>
</xs:sequence>
<xs:attribute name="SessionID" type="IdentifierType"
use="required"/>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- ServerFinished PDU -->
<xs:element name="ServerFinished" type="ServerFinishedPDU"/>
<xs:complexType name="ServerFinishedPDU">
<xs:annotation>
<xs:documentation xml:lang="en">
Final message sent from CT-KIP server to CT-KIP client in an
CT-KIP session.
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="AbstractResponseType">
<xs:sequence minOccurs="0">
<xs:element name="TokenID" type="xs:base64Binary"/>
<xs:element name="KeyID" type="xs:base64Binary"/>
<xs:element name="KeyExpiryDate" type="xs:dateTime"
Nystroem Informational PAGE 45
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
minOccurs="0"/>
<xs:element name="ServiceID" type="IdentifierType"
minOccurs="0"/>
<xs:element name="ServiceLogo" type="LogoType"
minOccurs="0"/>
<xs:element name="UserID" type="IdentifierType"
minOccurs="0"/>
<xs:element name="Extensions" type="ExtensionsType"
minOccurs="0"/>
<xs:element name="Mac" type="MacType"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
</xs:schema>
Appendix B. Examples of CT-KIP Messages
B.1. Introduction
All examples are syntactically correct. MAC and cipher values are
fictitious, however. The examples illustrate a complete CT-KIP
exchange, starting with an initialization (trigger) message from the
server.
B.2. Example of a CT-KIP Initialization (Trigger) Message
<CT-KIPTrigger
xmlns=
"http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/ct-kip#"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
Version="1.0">
<InitializationTrigger>
<TokenID>12345678</TokenID>
<TriggerNonce>112dsdfwf312asder394jw==</TriggerNonce>
</InitializationTrigger>
</CT-KIPTrigger>
B.3. Example of a <ClientHello> Message
<?xml version="1.0" encoding="UTF-8"?>
<ClientHello
xmlns=
"http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/ct-kip#"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
Version="1.0">
<TokenID>12345678</TokenID>
Nystroem Informational PAGE 46
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
<TriggerNonce>112dsdfwf312asder394jw==</TriggerNonce>
<SupportedKeyTypes>
<Algorithm>http://www.rsasecurity.com/rsalabs/otps/schemas
/2005/09/otps-wst#SecurID-AES</Algorithm>
</SupportedKeyTypes>
<SupportedEncryptionAlgorithms>
<Algorithm>http://www.w3.org/2001/04/xmlenc#rsa-1_5</Algorithm>
<Algorithm>http://www.rsasecurity.com/rsalabs/otps/schemas/
2005/12/ct-kip#ct-kip-prf-aes</Algorithm>
</SupportedEncryptionAlgorithms>
<SupportedMACAlgorithms>
<Algorithm>http://www.rsasecurity.com/rsalabs/otps/schemas/
2005/12/ct-kip#ct-kip-prf-aes</Algorithm>
</SupportedMACAlgorithms>
</ClientHello>
B.4. Example of a <ServerHello> Message
<?xml version="1.0" encoding="UTF-8"?>
<ServerHello
xmlns=
"http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/ct-kip#"
xmlns:ds="http://www.w3.org/2000/09/xmldsig#"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
Version="1.0" SessionID="4114" Status="Success">
<KeyType>http://www.rsasecurity.com/rsalabs/otps/schemas/2005/09/
otps-wst#SecurID-AES</KeyType>
<EncryptionAlgorithm>http://www.rsasecurity.com/rsalabs/otps/
schemas/2005/12/ct-kip#ct-kip-prf-aes</EncryptionAlgorithm>
<MacAlgorithm>http://www.rsasecurity.com/rsalabs/otps/schemas/
2005/12/ct-kip#ct-kip-prf-aes</MacAlgorithm>
<EncryptionKey>
<ds:KeyName>KEY-1</ds:KeyName>
</EncryptionKey>
<Payload>
<Nonce>qw2ewasde312asder394jw==</Nonce>
</Payload>
</ServerHello>
B.5. Example of a <ClientNonce> Message
<?xml version="1.0" encoding="UTF-8"?>
<ClientNonce
xmlns="http://www.rsasecurity.com/rsalabs/otps/schemas/
2005/12/ct-kip#"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
Version="1.0" SessionID="4114">
<EncryptedNonce>vXENc+Um/9/NvmYKiHDLaErK0gk=</EncryptedNonce>
Nystroem Informational PAGE 47
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
</ClientNonce>
B.6. Example of a <ServerFinished> Message
<?xml version="1.0" encoding="UTF-8"?>
<ServerFinished
xmlns="http://www.rsasecurity.com/rsalabs/otps/schemas/
2005/12/ct-kip#"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
Version="1.0" SessionID="4114" Status="Success">
<TokenID>12345678</TokenID>
<KeyExpiryDate>2009-09-16T03:02:00Z</KeyExpiryDate>
<KeyID>43212093</KeyID>
<ServiceID>Example Enterprise Name</ServiceID>
<UserID>exampleLoginName</UserID>
<Extensions>
<Extension xsi:type="OTPKeyConfigurationDataType">
<OTPFormat>Decimal</OTPFormat>
<OTPLength>6</OTPLength>
<OTPMode><Time/></OTPMode>
</Extension>
</Extensions>
<Mac>miidfasde312asder394jw==</Mac>
</ServerFinished>
Appendix C. Integration with PKCS #11
A CT-KIP client that needs to communicate with a connected
cryptographic token to perform a CT-KIP exchange may use PKCS #11 [3]
as a programming interface. When performing CT-KIP with a
cryptographic token using the PKCS #11 programming interface, the
procedure described in [2], Appendix B, is recommended.
Appendix D. Example CT-KIP-PRF Realizations
D.1. Introduction
This example appendix defines CT-KIP-PRF in terms of AES [8] and HMAC
[9].
D.2. CT-KIP-PRF-AES
D.2.1. Identification
For tokens supporting this realization of CT-KIP-PRF, the following
URI may be used to identify this algorithm in CT-KIP:
http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/
Nystroem Informational PAGE 48
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
ct-kip#ct-kip-prf-aes
When this URI is used to identify the encryption algorithm to use,
the method for encryption of R_C values described in Section 3.6
shall be used.
D.2.2. Definition
CT-KIP-PRF-AES (k, s, dsLen)
Input:
k encryption key to use
s octet string consisting of randomizing material. The length of
the string s is sLen.
dsLen desired length of the output
Output:
DS a pseudorandom string, dsLen-octets long
Steps:
1. Let bLen be the output block size of AES in octets:
bLen = (AES output block length in octets)
(normally, bLen = 16)
2. If dsLen > (2**32 - 1) * bLen, output "derived data too long" and
stop
3. Let n be the number of bLen-octet blocks in the output data,
rounding up, and let j be the number of octets in the last block:
n = ROUND( dsLen / bLen )
j = dsLen - (n - 1) * bLen
4. For each block of the pseudorandom string DS, apply the function
F defined below to the key k, the string s and the block index to
compute the block:
B1 = F (k, s, 1) ,
B2 = F (k, s, 2) ,
Nystroem Informational PAGE 49
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
...
Bn = F (k, s, n)
The function F is defined in terms of the OMAC1 construction from
[10], using AES as the block cipher:
F (k, s, i) = OMAC1-AES (k, INT (i) || s)
where INT (i) is a four-octet encoding of the integer i, most
significant octet first, and the output length of OMAC1 is set to
bLen.
Concatenate the blocks and extract the first dsLen octets to produce
the desired data string DS:
DS = B1 || B2 || ... || Bn<0..j-1>
Output the derived data DS.
D.2.3. Example
If we assume that dsLen = 16, then:
n = 16 / 16 = 1
j = 16 - (1 - 1) * 16 = 16
DS = B1 = F (k, s, 1) = OMAC1-AES (k, INT (1) || S)
D.3. CT-KIP-PRF-SHA256
D.3.1. Identification
For tokens supporting this realization of CT-KIP-PRF, the following
URI may be used to identify this algorithm in CT-KIP:
http://www.rsasecurity.com/rsalabs/otps/schemas/2005/12/
ct-kip#ct-kip-prf-sha256
When this URI is used to identify the encryption algorithm to use,
the method for encryption of R_C values described in Section 3.6
shall be used.
Nystroem Informational PAGE 50
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
D.3.2. Definition
CT-KIP-PRF-SHA256 (k, s, dsLen)
Input:
k encryption key to use
s octet string consisting of randomizing material. The length of
the string s is sLen
dsLen desired length of the output
Output:
DS a pseudorandom string, dsLen-octets long
Steps:
1. Let bLen be the output size in octets of SHA-256 [11] (no
truncation is done on the HMAC output):
bLen = 32
2. If dsLen > (2**32 - 1) bLen, output "derived data too long" and
stop
3. Let n be the number of bLen-octet blocks in the output data,
rounding up, and let j be the number of octets in the last block:
n = ROUND ( dsLen / bLen )
j = dsLen - (n - 1) * bLen
4. For each block of the pseudorandom string DS, apply the function
F defined below to the key k, the string s and the block index to
compute the block:
B1 = F (k, s, 1) ,
B2 = F (k, s, 2) ,
...
Bn = F (k, s, n)
Nystroem Informational PAGE 51
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
The function F is defined in terms of the HMAC construction from [9],
using SHA-256 as the digest algorithm:
F (k, s, i) = HMAC-SHA256 (k, INT (i) || s)
where INT (i) is a four-octet encoding of the integer i, most
significant octet first, and the output length of HMAC is set to
bLen.
Concatenate the blocks and extract the first dsLen octets to produce
the desired data string DS:
DS = B1 || B2 || ... || Bn<0..j-1>
Output the derived data DS.
D.3.3. Example
If we assume that sLen = 256 (two 128-octet long values) and dsLen =
16, then:
n = ROUND ( 16 / 32 ) = 1
j = 16 - (1 - 1) * 32 = 16
B1 = F (k, s, 1) = HMAC-SHA256 (k, INT (1) || s )
DS = B1<0 ... 15>
That is, the result will be the first 16 octets of the HMAC output.
Nystroem Informational PAGE 52
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
Appendix E. About OTPS
The One-Time Password Specifications are documents produced by RSA
Laboratories in cooperation with secure systems developers for the
purpose of simplifying integration and management of strong
authentication technology into secure applications, and to enhance
the user experience of this technology.
Further development of the OTPS series will occur through mailing
list discussions and occasional workshops, and suggestions for
improvement are welcome. As for our PKCS documents, results may also
be submitted to standards forums. For more information, contact:
OTPS Editor
RSA Laboratories
174 Middlesex Turnpike
Bedford, MA 01730 USA
otps-editor@rsasecurity.com
http://www.rsasecurity.com/rsalabs/
Author's Address
Magnus Nystroem
RSA Security
EMail: magnus@rsasecurity.com
Nystroem Informational PAGE 53
RFC 4758 CT-KIP Version 1.0 Revision 1 November 2006
Full Copyright Statement
Copyright © The IETF Trust (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST,
AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT
THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Nystroem Informational PAGE 54
Cryptographic Token Key Initialization Protocol (CT-KIP) Version 1.0 Revision 1
RFC TOTAL SIZE: 110657 bytes
PUBLICATION DATE: Thursday, November 30th, 2006
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
