|
|
|
|
|
|
IETF RFC 3887
Message Tracking Query Protocol
Last modified on Monday, September 27th, 2004
 Permanent link to RFC 3887
 Search GitHub Wiki for RFC 3887
 Show other RFCs mentioning RFC 3887
Network Working Group T. Hansen
Request for Comments: 3887 AT&T Laboratories
Category: Standards Track September 2004
Message Tracking Query Protocol
 Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright © The Internet Society (2004).
Abstract
Customers buying enterprise message systems often ask: Can I track
the messages? Message tracking is the ability to find out the path
that a particular message has taken through a messaging system and
the current routing status of that message. This document describes
the Message Tracking Query Protocol that is used in conjunction with
extensions to the ESMTP protocol to provide a complete message
tracking solution for the Internet.
1. Introduction
The Message Tracking Models and Requirements document
[RFC-MTRK-MODEL] discusses the models that message tracking solutions
could follow, along with requirements for a message tracking solution
that can be used with the Internet-wide message infrastructure. This
memo and its companions, [RFC-MTRK-ESMTP] and [RFC-MTRK-TSN],
describe a complete message tracking solution that satisfies those
requirements. The memo [RFC-MTRK-ESMTP] defines an extension to the
SMTP service that provides the information necessary to track
messages. This memo defines a protocol that can be used to query the
status of messages that have been transmitted on the Internet via
SMTP. The memo [RFC-MTRK-TSN] describes the message/tracking-status
[RFC-MIME] media type that is used to report tracking status
information. Using the model document's terminology, this solution
uses active enabling and active requests with both request and
chaining referrals.
Hansen Standards Track PAGE 1 
RFC 3887 Message Tracking Query Protocol September 2004
1.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in BCP 14, RFC 2119
[RFC-KEYWORDS].
All syntax descriptions use the ABNF specified by [RFC-ABNF].
Terminal nodes not defined elsewhere in this document are defined in
[RFC-ABNF], [RFC-URI], [RFC-MTRK-ESMTP], [RFC-SMTP], or
[RFC-SMTPEXT].
2. Basic Operation
The Message Tracking Query Protocol (MTQP) is similar to many other
line-oriented Internet protocols, such as [POP3] and [NNTP].
Initially, the server host starts the MTQP service by listening on
TCP port 1038.
When an MTQP client wishes to make use of the message tracking
service, it establishes a TCP connection with the server host, as
recorded from the initial message submission or as returned by a
previous tracking request. To find the server host, the MTQP client
first does an SRV lookup for the server host using DNS SRV records,
with a service name of "mtqp" and a protocol name of "tcp", as in
_mtqp._tcp.smtp3.example.com. (See the "Usage rules" section in
[RFC-SRV] for details.) If the SRV records do not exist, the MTQP
client then does an address record lookup for the server host. When
the connection is established, the MTQP server sends a greeting. The
MTQP client and MTQP server then exchange commands and responses
(respectively) until the connection is closed or aborted.
2.1. Tracking Service DNS Considerations
Because of the ways server host lookups are performed, many different
tracking server host configurations are supported.
A mail system that uses a single mail server host and has the MTQP
server host on the same server host will most likely have a single MX
record pointing at the server host, and if not, will have an address
record. Both mail and MTQP clients will access that host directly.
A mail system that uses a single mail server host, but wants tracking
queries to be performed on a different machine, MUST have an SRV MTQP
record pointing at that different machine.
Hansen Standards Track PAGE 2
RFC 3887 Message Tracking Query Protocol September 2004
A mail system that uses multihomed mail servers has two choices for
providing tracking services: either all mail servers must be running
tracking servers that are able to retrieve information on all
messages, or the tracking service must be performed on one (or more)
machine(s) that are able to retrieve information on all messages. In
the former case, no additional DNS records are needed beyond the MX
records already in place for the mail system. In the latter case,
SRV MTQP records are needed that point at the machine(s) that are
running the tracking service. In both cases, note that the tracking
service MUST be able to handle the queries for all messages accepted
by that mail system.
2.2. Commands
Commands in MTQP consist of a case-insensitive keyword, possibly
followed by one or more parameters. All commands are terminated by a
CRLF pair. Keywords and parameters consist of printable ASCII
characters. Keywords and parameters are separated by whitespace (one
or more space or tab characters). A command line is limited to 998
characters before the CRLF.
2.3. Responses
Responses in MTQP consist of a status indicator that indicates
success or failure. Successful commands may also be followed by
additional lines of data. All response lines are terminated by a
CRLF pair and are limited to 998 characters before the CRLF. There
are several status indicators: "+OK" indicates success; "+OK+"
indicates a success followed by additional lines of data, a multi-
line success response; "-TEMP" indicates a temporary failure; "-ERR"
indicates a permanent failure; and "-BAD" indicates a protocol error
(such as for unrecognized commands).
A status indicator MAY be followed by a series of machine-parsable,
case-insensitive response information giving more data about the
errors. These are separated from the status indicator and each other
by a single slash character ("/", decimal code 47). Following that,
there MAY be white space and a human-readable text message. The
human-readable text message is not intended to be presented to the
end user, but should be appropriate for putting in a log for use in
debugging problems.
In a multi-line success response, each subsequent line is terminated
by a CRLF pair and limited to 998 characters before the CRLF. When
all lines of the response have been sent, a final line is sent
consisting of a single period (".", decimal code 046) and a CRLF
pair. If any line of the multi-line response begins with a period,
the line is "dot-stuffed" by prepending the period with a second
Hansen Standards Track PAGE 3
RFC 3887 Message Tracking Query Protocol September 2004
period. When examining a multi-line response, the client checks to
see if the line begins with a period. If so, and octets other than
CRLF follow, the first octet of the line (the period) is stripped
away. If so, and if CRLF immediately follows the period, then the
response from the MTQP server is ended and the line containing the
".CRLF" is not considered part of the multi-line response.
An MTQP server MUST respond to an unrecognized, unimplemented, or
syntactically invalid command by responding with a negative -BAD
status indicator. A server MUST respond to a command issued when the
session is in an incorrect state by responding with a negative -ERR
status indicator.
2.4. Firewall Considerations
A firewall mail gateway has two choices when receiving a tracking
query for a host within its domain: it may return a response to the
query that says the message has been passed on, but no further
information is available; or it may perform a chaining operation
itself, gathering information on the message from the mail hosts
behind the firewall, and returning to the MTQP client the information
for each behind-the-firewall hop, or possibly just the final hop
information, possibly also disguising the names of any hosts behind
the firewall. Which option is picked is an administrative decision
and is not further mandated by this document.
If a server chooses to perform a chaining operation itself, it MUST
provide a response within 2 minutes, and SHOULD return a "no further
information is available" response if it cannot provide an answer at
the end of that time limit.
2.5. Optional Timers
An MTQP server MAY have an inactivity autologout timer. Such a timer
MUST be of at least 10 minutes in duration. The receipt of any
command from the client during that interval should suffice to reset
the autologout timer. An MTQP server MAY limit the number of
commands, unrecognized commands, or total connection time, or MAY use
other criteria, to prevent denial of service attacks.
An MTQP client MAY have an inactivity autologout timer while waiting
for a response from the server. Since an MTQP server may be a
firewall, and may be chaining information from other servers, such a
timer MUST be at least 2 minutes in duration.
Hansen Standards Track PAGE 4
RFC 3887 Message Tracking Query Protocol September 2004
3. Initialization and Option Response
Once the TCP connection has been opened by an MTQP client, the MTQP
server issues an initial status response that indicates its
readiness. If the status response is positive (+OK or +OK+), the
client may proceed with other commands.
The initial status response MUST include the response information
"/MTQP". Negative responses MUST include a reason code as response
information. The following reason codes are defined here;
unrecognized reason codes added in the future may be treated as
equivalent to "unavailable".
"/" "unavailable"
"/" "admin"
The reason code "/admin" SHOULD be used when the service is
unavailable for administrative reasons. The reason code
"/unavailable" SHOULD be used when the service is unavailable for
other reasons.
If the server has any options enabled, they are listed as the multi-
line response of the initial status response, one per line. An
option specification consists of an identifier, optionally followed
by option-specific parameters. An option specification may be
continued onto additional lines by starting the continuation lines
with white space. The option identifier is case insensitive. Option
identifiers beginning with the characters "vnd." are reserved for
vendor use. (See below.)
One option specification is defined here:
STARTTLS [1*WSP "required"]
This capability MUST be listed if the optional STARTTLS command is
enabled on the MQTP server and one or more certificates have been
properly installed.
It has one optional parameter: the word "required" (The parameters
for STARTTLS are case-insensitive). If the server requires that TLS
be used for some of the domains the server handles, the server MUST
specify the "required" parameter.
Hansen Standards Track PAGE 5
RFC 3887 Message Tracking Query Protocol September 2004
3.1. Examples
Example #1 (no options):
S: +OK/MTQP MTQP server ready
Example #2 (service temporarily unavailable):
S: -TEMP/MTQP/admin Service down for admin, call back later
Example #3 (service permanently unavailable):
S: -ERR/MTQP/unavailable Service down
Example #4 (alternative for no options):
S: +OK+/MTQP MTQP server ready
S: .
Example #5 (options available):
S: +OK+/MTQP MTQP server ready
S: starttls
S: vnd.com.example.option2 with parameters private to example.com
S: vnd.com.example.option3 with a very long
S: list of parameters
S: .
4. TRACK Command
Syntax:
track-command = "TRACK" 1*WSP unique-envid 1*WSP mtrk-secret CRLF
mtrk-secret = base64
Unique-envid is defined in [RFC-MTRK-ESMTP]. Mtrk-secret is the
secret A described in [RFC-MTRK-ESMTP], encoded using base64.
When the client issues the TRACK command, and the user is validated,
the MTQP server retrieves tracking information about an email
message. To validate the user, the value of mtrk-secret is hashed
using SHA1, as described in [RFC-SHA1]. The hash value is then
compared with the value passed with the message when it was
originally sent. If the hash values match, the user is validated.
A successful response MUST be multi-line, consisting of a [RFC-MIME]
body part. The MIME body part MUST be of type multipart/related,
with subparts of message/tracking-status, as defined in
[RFC-MTRK-TSN]. The response contains the tracking information about
the email message that used the given tracking-id. A negative
response to the TRACK command may include these reason codes:
Hansen Standards Track PAGE 6
RFC 3887 Message Tracking Query Protocol September 2004
"/" "tls-required"
"/" "admin"
"/" "unavailable"
"/" "noinfo"
"/" "insecure"
The reason code "/tls-required" SHOULD be used when the server has
decided to require TLS. The reason code "/admin" SHOULD be used when
the server has become unavailable, due to administrative reasons,
since the connection was initialized. The reason code "/unavailable"
SHOULD be used when the server has become unavailable, for other
reasons, since the connection was initialized. The reason code
"/insecure" is described later.
If a message has not been seen by the MTQP server, the server MUST
choose between two choices: it MAY return a positive response with an
action field of "opaque" in the tracking information, or it MAY
return a negative response with a reason code of "noinfo".
4.1. Examples
In each of the examples below, the unique-envid is
"<12345-20010101@example.com>", the secret A is "abcdefgh", and the
SHA1 hash B is (in hex) "734ba8b31975d0dbae4d6e249f4e8da270796c94".
The message came from example.com and the MTQP server is
example2.com.
Example #6 Message Delivered:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: delivered
S: Status: 2.5.0
S:
S: --%%%%--
S: .
Hansen Standards Track PAGE 7
RFC 3887 Message Tracking Query Protocol September 2004
Example #7 Message Transferred:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: transferred
S: Remote-MTA: dns; example3.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S: Status:2.4.0
S:
S: --%%%%--
S: .
Example #8 Message Delayed and a Dot-Stuffed Header:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S: ..Dot-Stuffed-Header: as an example
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: delayed
S: Status: 4.4.1 (No answer from host)
S: Remote-MTA: dns; example3.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S: Will-Retry-Until: Thu, 4 Jan 2001 15:15:15 -0500
S:
S: --%%%%--
S: .
Hansen Standards Track PAGE 8
RFC 3887 Message Tracking Query Protocol September 2004
Example #9 Two Users, One Relayed, One Failed:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: relayed
S: Status: 2.1.9
S: Remote-MTA: dns; example3.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S:
S: Original-Recipient: RFC 822; user2@example1.com
S: Final-Recipient: RFC 822; user2@example1.com
S: Action: failed
S: Status 5.2.2 (Mailbox full)
S: Remote-MTA: dns; example3.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S:
S: --%%%%--
S: .
Example #10 Firewall:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: relayed
S: Status: 2.1.9
S: Remote-MTA: dns; smtp.example3.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S:
Hansen Standards Track PAGE 9
RFC 3887 Message Tracking Query Protocol September 2004
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; smtp.example3.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user2@example1.com
S: Final-Recipient: RFC 822; user4@example3.com
S: Action: delivered
S: Status: 2.5.0
S:
S: --%%%%--
S: .
Example #11 Firewall, Combining Per-Recipient Blocks:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: relayed
S: Status: 2.1.9
S: Remote-MTA: dns; smtp.example3.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S:
S: Original-Recipient: RFC 822; user2@example1.com
S: Final-Recipient: RFC 822; user4@example3.com
S: Action: delivered
S: Status:2.5.0
S:
S: --%%%%--
S: .
Hansen Standards Track PAGE 10
RFC 3887 Message Tracking Query Protocol September 2004
Example #12 Firewall, Hiding System Names Behind the Firewall:
C: TRACK <12345-20010101@example.com> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S: Content-Type: multipart/related; boundary=%%%%; type=tracking-status
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user1@example1.com
S: Final-Recipient: RFC 822; user1@example1.com
S: Action: relayed
S: Status: 2.1.9
S: Remote-MTA: dns; example2.com
S: Last-Attempt-Date: Mon, 1 Jan 2001 19:15:03 -0500
S:
S: --%%%%
S: Content-Type: message/tracking-status
S:
S: Original-Envelope-Id: 12345-20010101@example.com
S: Reporting-MTA: dns; example2.com
S: Arrival-Date: Mon, 1 Jan 2001 15:15:15 -0500
S:
S: Original-Recipient: RFC 822; user2@example1.com
S: Final-Recipient: RFC 822; user4@example1.com
S: Action: delivered
S: Status: 2.5.0
S:
S: --%%%%--
S: .
5. COMMENT Command
Syntax:
comment-command = "COMMENT" opt-text CRLF
opt-text = [WSP *(VCHAR / WSP)]
When the client issues the COMMENT command, the MTQP server MUST
respond with a successful response (+OK or +OK+). All optional text
provided with the COMMENT command are ignored.
Hansen Standards Track PAGE 11
RFC 3887 Message Tracking Query Protocol September 2004
6. STARTTLS Command
Syntax:
starttls-command = "STARTTLS" 1*WSP domain *WSP CRLF
domain = (sub-domain 1*("." sub-domain))
TLS [TLS] is a popular mechanism for enhancing TCP communications
with confidentiality and authentication. All MTQP servers MUST
implement TLS. However, TLS MAY be disabled by a server
administrator, either explicitly or by failing to install any
certificates for TLS to use. If an MTQP server supports TLS and has
one or more certificates available it MUST include "STARTTLS" in the
option specifications list on protocol startup.
Note: TLS SHOULD be enabled on MQTP servers whenever possible.
The parameter MUST be a fully qualified domain name (FQDN). A client
MUST specify the hostname it believes it is speaking with so that the
server may respond with the proper TLS certificate. This is useful
for virtual servers that provide message tracking for multiple
domains (i.e., virtual hosting).
If the server returns a negative response, it MAY use one of the
following response codes:
"/" "unsupported"
"/" "unavailable"
"/" "tls-in-progress"
"/" "bad-fqdn"
If TLS is not supported, then a response code of "/unsupported"
SHOULD be used. If TLS is not available for some other reason, then
a response code of "/unavailable" SHOULD be used. If a TLS session
is already in progress, then it is a protocol error and "-BAD" MUST
be returned with a response code of "/tls-in-progress". If there is
a mismatch between the supplied FQDN and the FQDN found in the
dNSName field of the subjectAltName extension of the server's
certificate [RFC-X509], then it is a protocol error and "-BAD" MUST
be returned with a response code of "/bad-fqdn".
After receiving a positive response to a STARTTLS command, the client
MUST start the TLS negotiation before giving any other MTQP commands.
If the MTQP client is using pipelining (see below), the STARTTLS
command must be the last command in a group.
Hansen Standards Track PAGE 12
RFC 3887 Message Tracking Query Protocol September 2004
6.1. Processing After the STARTTLS Command
If the TLS handshake fails, the server SHOULD abort the connection.
After the TLS handshake has been completed, both parties MUST
immediately decide whether or not to continue based on the
authentication and confidentiality achieved. The MTQP client and
server may decide to move ahead even if the TLS negotiation ended
with no authentication and/or no confidentiality because most MTQP
services are performed with no authentication and no confidentiality,
but some MTQP clients or servers may want to continue only if a
particular level of authentication and/or confidentiality was
achieved.
If the MTQP client decides that the level of authentication or
confidentiality is not high enough for it to continue, it SHOULD
issue an MTQP QUIT command immediately after the TLS negotiation is
complete.
If the MTQP server decides that the level of authentication or
confidentiality is not high enough for it to continue, it MAY abort
the connection. If it decides that the level of authentication or
confidentiality is not high enough for it to continue, and it does
not abort the connection, it SHOULD reply to every MTQP command from
the client (other than a QUIT command) with a negative "-ERR"
response and a response code of "/insecure".
6.2. Result of the STARTTLS Command
Upon completion of the TLS handshake, the MTQP protocol is reset to
the initial state (the state in MTQP after a server starts up). The
server MUST discard any knowledge obtained from the client prior to
the TLS negotiation itself. The client MUST discard any knowledge
obtained from the server, such as the list of MTQP options, which was
not obtained from the TLS negotiation itself.
At the end of the TLS handshake, the server acts as if the connection
had been initiated and responds with an initial status response and,
optionally, a list of server options. The list of MTQP server
options received after the TLS handshake MUST be different than the
list returned before the TLS handshake. In particular, a server MUST
NOT return the STARTTLS option in the list of server options after a
TLS handshake has been completed.
Both the client and the server MUST know if there is a TLS session
active. A client MUST NOT attempt to start a TLS session if a TLS
session is already active.
Hansen Standards Track PAGE 13
RFC 3887 Message Tracking Query Protocol September 2004
7. QUIT Command
Syntax:
quit-command = "QUIT" CRLF
When the client issues the QUIT command, the MTQP session terminates.
The QUIT command has no parameters. The server MUST respond with a
successful response. The client MAY close the session from its end
immediately after issuing this command (if the client is on an
operating system where this does not cause problems).
8. Pipelining
The MTQP client may elect to transmit groups of MTQP commands in
batches without waiting for a response to each individual command.
The MTQP server MUST process the commands in the order received.
Specific commands may place further constraints on pipelining. For
example, STARTTLS must be the last command in a batch of MTQP
commands.
8.1. Examples
The following two examples are identical:
Example #13 :
C: TRACK <tracking-id> YWJjZGVmZ2gK
S: +OK+ Tracking information follows
S:
S: ... tracking details #1 go here ...
S: .
C: TRACK <tracking-id-2> QUJDREVGR0gK
S: +OK+ Tracking information follows
S:
S: ... tracking details #2 go here ...
S: .
Hansen Standards Track PAGE 14
RFC 3887 Message Tracking Query Protocol September 2004
Example #14 :
C: TRACK <tracking-id> YWJjZGVmZ2gK
C: TRACK <tracking-id-2> QUJDREVGR0gK
S: +OK+ Tracking information follows
S:
S: ... tracking details #1 go here ...
S: .
S: +OK+ Tracking information follows
S:
S: ... tracking details #2 go here ...
S: .
9. The MTQP URI Scheme
9.1. Intended usage
The MTQP URI scheme is used to designate MTQP servers on Internet
hosts accessible using the MTQP protocol. It performs an MTQP query
and returns tracking status information.
9.2. URI Scheme Name
The name of the URI scheme is "mtqp".
9.3. URI Scheme Syntax
An MTQP URI takes one of the following forms:
mtqp://<mserver>/track/<unique-envid>/<mtrk-secret>
mtqp://<mserver>:<port>/track/<unique-envid>/<mtrk-secret>
The first form is used to refer to an MTQP server on the standard
port, while the second form specifies a non-standard port. Both of
these forms specify that the TRACK command is to be issued using the
given tracking id (unique-envid) and authorization secret (mtrk-
secret). The path element "/track/" MUST BE treated case
insensitively, but the unique-envid and mtrk-secret MUST NOT be.
9.3.1. Formal Syntax
This is an ABNF description of the MTQP URI.
mtqp-uri = "mtqp://" authority "/track/" unique-envid "/" mtrk-secret
Hansen Standards Track PAGE 15
RFC 3887 Message Tracking Query Protocol September 2004
9.4. Encoding Rules
The encoding of unique-envid is discussed in [RFC-MTRK-ESMTP].
Mtrk-secret is required to be base64 encoded. If the "/", "?" and
"%" octets appear in unique-envid or mtrk-secret, they are further
required to be represented by a "%" followed by two hexadecimal
characters. (The two characters give the hexadecimal representation
of that octet).
10. IANA Considerations
System port number 1038 has been assigned to the Message Tracking
Query Protocol by the Internet Assigned Numbers Authority (IANA).
The service name "MTQP" has been registered with the IANA.
The IANA has also registered the URI registration template found in
Appendix A in accordance with [BCP35].
This document requests that IANA maintain one new registry: MTQP
options. The registry's purpose is to register options to this
protocol. Options whose names do not begin with "vnd." MUST be
defined in a standards track or IESG approved experimental RFC. New
MTQP options MUST include the following information as part of their
definition:
option identifier
option parameters
added commands
standard commands affected
specification reference
discussion
One MTQP option is defined in this document, with the following
registration definition:
option identifier: STARTTLS
option parameters: none
added commands: STARTTLS
standard commands affected: none
specification reference: RFC 3887
discussion: see RFC 3887
Additional vendor-specific options for this protocol have names that
begin with "vnd.". After the "vnd." would appear the reversed domain
name of the vendor, another dot ".", and a name for the option
itself. For example, "vnd.com.example.extinfo" might represent a
Hansen Standards Track PAGE 16
RFC 3887 Message Tracking Query Protocol September 2004
vendor-specific extension providing extended information by the owner
of the "example.com" domain. These names MAY be registered with
IANA.
11. Security Considerations
If the originator of a message were to delegate his or her tracking
request to a third party, this would be vulnerable to snooping over
unencrypted sessions. The user can decide on a message-by-message
basis if this risk is acceptable.
The security of tracking information is dependent on the randomness
of the secret chosen for each message and the level of exposure of
that secret. If different secrets are used for each message, then
the maximum exposure from tracking any message will be that single
message for the time that the tracking information is kept on any
MTQP server. If this level of exposure is too much, TLS may be used
to reduce the exposure further.
It should be noted that message tracking is not an end-to-end
mechanism. Thus, if an MTQP client/server pair decide to use TLS
confidentiality, they are not securing tracking queries with any
prior or successive MTQP servers.
Both the MTQP client and server must check the result of the TLS
negotiation to see whether acceptable authentication or
confidentiality was achieved. Ignoring this step completely
invalidates using TLS for security. The decision about whether
acceptable authentication or confidentiality was achieved is made
locally, is implementation-dependent, and is beyond the scope of this
document.
The MTQP client and server should note carefully the result of the
TLS negotiation. If the negotiation results in no confidentiality,
or if it results in confidentiality using algorithms or key lengths
that are deemed not strong enough, or if the authentication is not
good enough for either party, the client may choose to end the MTQP
session with an immediate QUIT command, or the server may choose to
not accept any more MTQP commands.
A man-in-the-middle attack can be launched by deleting the "STARTTLS"
option response from the server. This would cause the client not to
try to start a TLS session. An MTQP client can protect against this
attack by recording the fact that a particular MTQP server offers TLS
during one session and generating an alarm if it does not appear in
an option response for a later session.
Hansen Standards Track PAGE 17
RFC 3887 Message Tracking Query Protocol September 2004
Similarly, the identity of the server as expressed in the server's
certificate should be cached, and an alarm generated if they do not
match in a later session.
If TLS is not used, a tracking request is vulnerable to replay
attacks, such that a snoop can later replay the same handshake again
to potentially gain more information about a message's status.
Before the TLS handshake has begun, any protocol interactions are
performed in the clear and may be modified by an active attacker.
For this reason, clients and servers MUST discard any knowledge
obtained prior to the start of the TLS handshake upon completion of
the TLS handshake.
If a client/server pair successfully performs a TLS handshake and the
server does chaining referrals, then the server SHOULD attempt to
negotiate TLS at the same (or better) security level at the next hop.
In a hop-by-hop scenario, STARTTLS is a request for "best effort"
security and should be treated as such.
SASL is not used because authentication is per message rather than
per user.
12. Protocol Syntax
This is a collected ABNF description of the MTQP protocol.
mtqp-uri = "mtqp://" authority "/track/" unique-envid "/" mtrk-secret
conversation = command-response *(client-command command-response)
; client side
client-command = track-command / starttls-command / quit-command
/comment-command
track-command = "TRACK" 1*WSP unique-envid 1*WSP mtrk-secret CRLF
mtrk-secret = base64
starttls-command = "STARTTLS" 1*WSP domain *WSP CRLF
domain = (sub-domain 1*("." sub-domain))
quit-command = "QUIT" CRLF
comment-command = "COMMENT" opt-text CRLF
Hansen Standards Track PAGE 18
RFC 3887 Message Tracking Query Protocol September 2004
; server side
command-response = success-response / temp-response / error-response /
bad-response
temp-response = "-TEMP" response-info opt-text CRLF
opt-text = [WSP *(VCHAR / WSP)]
error-response = "-ERR" response-info opt-text CRLF
bad-response = "-BAD" response-info opt-text CRLF
success-response = single-line-success / multi-line-success
single-line-success = "+OK" response-info opt-text CRLF
multi-line-success = "+OK+" response-info opt-text CRLF
*dataline dotcrlf
dataline = *998OCTET CRLF
dotcrlf = "." CRLF
NAMECHAR = ALPHA / DIGIT / "-" / "_"
response-info = *( "/" ( "admin" / "unavailable" / "unsupported"
/ "tls-in-progress" / "insecure" / "tls-required" / 1*NAMECHAR ) )
13. Acknowledgements
The description of STARTTLS is based on [RFC-SMTP-TLS].
Hansen Standards Track PAGE 19
RFC 3887 Message Tracking Query Protocol September 2004
14. References
14.1. Normative References
[RFC-MIME] Freed, N. and N. Borenstein, "Multipurpose
Internet Mail Extensions (MIME) Part One: Format
of Internet Message Bodies", RFC 2045, November
1996.
[RFC-ABNF] Crocker, D., Ed. and P. Overell, "Augmented BNF
for Syntax Specifications: ABNF", RFC 2234,
November 1997.
[RFC-SRV] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS
RR for specifying the location of services (DNS
SRV)", RFC 2782, February 2000.
[RFC-SMTP] Klensin, J., "Simple Mail Transfer Protocol", RFC
2821, April 2001.
[RFC-SMTPEXT] Myers, J., "SMTP Service Extension for
Authentication", RFC 2554, March 1999.
[RFC-MTRK-ESMTP] Allman, E. and T. Hansen, "SMTP Service Extension
for Message Tracking", RFC 3885, September 2004.
[RFC-MTRK-MODEL] Hansen, T., "Message Tracking Models and
Requirements", RFC 3885, September 2004.
[RFC-MTRK-TSN] Allman, E., "The Message/Tracking-Status MIME
Extension", RFC 3886, September 2004.
[RFC-URI] Berners-Lee, T., Fielding, R. and L. Masinter,
"Uniform Resource Identifiers (URI): Generic
Syntax", RFC 2396, August 1998.
[TLS] Dierks, T. and C. Allen, "The TLS Protocol Version
1.0", RFC 2246, January 1999.
Hansen Standards Track PAGE 20
RFC 3887 Message Tracking Query Protocol September 2004
14.2. Informational References
[BCP35] Petke, R. and I. King, "Registration Procedures
for URL Scheme Names", BCP 35, RFC 2717, November
1999.
[RFC-SHA1] Eastlake, D. and P. Jones, "US Secure Hash
Algorithm 1 (SHA1)", RFC 3174, September 2001.
[RFC-KEYWORDS] Bradner, S., "Key words for use in RFCs to
Indicate Requirement Levels", BCP 14, RFC 2119,
March 1997.
[RFC-SMTP-TLS] Hoffman, P., "SMTP Service Extension for Secure
SMTP over Transport Layer Security", RFC 3207,
February 2002.
[RFC-X509] Housley, R., Polk, W., Ford, W. and D. Solo,
"Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation List (CRL)
Profile", RFC 3280, April 2002.
[POP3] Myers, J. and M. Rose, "Post Office Protocol -
Version 3", STD 53, RFC 1939, May 1996.
[NNTP] Kantor, B. and P. Lapsley, "Network News Transfer
Protocol", RFC 977, February 1986.
Hansen Standards Track PAGE 21
RFC 3887 Message Tracking Query Protocol September 2004
Appendix A. MTQP URI Registration Template
Scheme name: mtqp
Scheme syntax: see section 9.1
Character encoding considerations: see section 9.4
Intended usage: see section 9.3
Applications and/or protocols which use this scheme: MTQP
Interoperability considerations: as specified for MTQP
Security considerations: see section 11.0
Relevant publications: [RFC-MTRK-ESMTP], [RFC-MTRK-MODEL],
[RFC-MTRK-TSN]
Contact: MSGTRK Working Group
Author/Change Controller: IESG
Author's Address
Tony Hansen
AT&T Laboratories
Middletown, NJ 07748
USA
Phone: +1.732.420.8934
EMail: tony+msgtrk@maillennium.att.com
Hansen Standards Track PAGE 22
RFC 3887 Message Tracking Query Protocol September 2004
Full Copyright Statement
Copyright © The Internet Society (2004).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/S HE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE
INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the IETF's procedures with respect to rights in IETF Documents can
be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Hansen Standards Track PAGE 23
Message Tracking Query Protocol
RFC TOTAL SIZE: 42763 bytes
PUBLICATION DATE: Monday, September 27th, 2004
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
