The RFC Archive
 The RFC Archive   RFC 8491   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 8491

Signaling Maximum SID Depth (MSD) Using IS-IS

Last modified on Wednesday, November 14th, 2018

Permanent link to RFC 8491
Search GitHub Wiki for RFC 8491
Show other RFCs mentioning RFC 8491







Internet Engineering Task Force (IETF)                       J. Tantsura
Request for Comments: 8491                                  Apstra, Inc.
Category: Standards Track                                  U. Chunduri
ISSN: 2070-1721                                      Huawei Technologies
                                                               S. Aldrin
                                                            Google, Inc.
                                                             L. Ginsberg
                                                           Cisco Systems
                                                           November 2018


             Signaling Maximum SID Depth (MSD) Using IS-IS

 Abstract

   This document defines a way for an Intermediate System to
   Intermediate System (IS-IS) router to advertise multiple types of
   supported Maximum SID Depths (MSDs) at node and/or link granularity.
   Such advertisements allow entities (e.g., centralized controllers) to
   determine whether a particular Segment ID (SID) stack can be
   supported in a given network.  This document only defines one type of
   MSD: Base MPLS Imposition.  However, it defines an encoding that can
   support other MSD types.  This document focuses on MSD use in a
   network that is Segment Routing (SR) enabled, but MSD may also be
   useful when SR is not enabled.

 Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/RFC 8491.












Tantsura, et al.             Standards Track                 PAGE 1 top


RFC 8491 Signaling MSD Using IS-IS November 2018 Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3 1.2. Requirements Language . . . . . . . . . . . . . . . . . . 4 2. Node MSD Advertisement . . . . . . . . . . . . . . . . . . . 4 3. Link MSD Advertisement . . . . . . . . . . . . . . . . . . . 5 4. Procedures for Defining and Using Node and Link MSD Advertisements . . . . . . . . . . . . . . . . . . . . . . . 6 5. Base MPLS Imposition MSD . . . . . . . . . . . . . . . . . . 6 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7 7. Security Considerations . . . . . . . . . . . . . . . . . . . 8 8. References . . . . . . . . . . . . . . . . . . . . . . . . . 8 8.1. Normative References . . . . . . . . . . . . . . . . . . 8 8.2. Informative References . . . . . . . . . . . . . . . . . 9 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 10 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 10 1. Introduction When Segment Routing (SR) paths are computed by a centralized controller, it is critical that the controller learn the Maximum SID Depth (MSD) that can be imposed at each node/link of a given SR path. This ensures that the Segment Identifier (SID) stack depth of a computed path does not exceed the number of SIDs the node is capable of imposing. [PCEP-EXT] defines how to signal MSD in the Path Computation Element Communication Protocol (PCEP). However, if PCEP is not supported/ configured on the head-end of an SR tunnel or a Binding-SID anchor node, and the controller does not participate in IGP routing, it has no way of learning the MSD of nodes and links. BGP-LS (Distribution Tantsura, et al. Standards Track PAGE 2 top

RFC 8491 Signaling MSD Using IS-IS November 2018 of Link-State and TE Information Using Border Gateway Protocol) [RFC 7752] defines a way to expose topology and associated attributes and capabilities of the nodes in that topology to a centralized controller. MSD signaling by BGP-LS has been defined in [MSD-BGP]. Typically, BGP-LS is configured on a small number of nodes that do not necessarily act as head-ends. In order for BGP-LS to signal MSD for all the nodes and links in the network for which MSD is relevant, MSD capabilities SHOULD be advertised by every Intermediate System to Intermediate System (IS-IS) router in the network. Other types of MSDs are known to be useful. For example, [ELC-ISIS] defines Entropy Readable Label Depth (ERLD), which is used by a head- end to insert an Entropy Label (EL) at a depth where it can be read by transit nodes. This document defines an extension to IS-IS used to advertise one or more types of MSDs at node and/or link granularity. It also creates an IANA registry for assigning MSD-Type identifiers and defines the Base MPLS Imposition MSD-Type. In the future, it is expected that new MSD-Types will be defined to signal additional capabilities, e.g., entropy labels, SIDs that can be imposed through recirculation, or SIDs associated with another data plane such as IPv6. MSD advertisements MAY be useful even if Segment Routing itself is not enabled. For example, in a non-SR MPLS network, MSD defines the maximum label depth. 1.1. Terminology BMI: Base MPLS Imposition is the number of MPLS labels that can be imposed inclusive of all service/transport/special labels. MSD: Maximum SID Depth is the number of SIDs supported by a node or a link on a node. SID: Segment Identifier is defined in [RFC 8402]. Label Imposition: Imposition is the act of modifying and/or adding labels to the outgoing label stack associated with a packet. This includes: * replacing the label at the top of the label stack with a new label * pushing one or more new labels onto the label stack Tantsura, et al. Standards Track PAGE 3 top

RFC 8491 Signaling MSD Using IS-IS November 2018 The number of labels imposed is then the sum of the number of labels that are replaced and the number of labels that are pushed. See [RFC 3031] for further details. 1.2. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC 2119] [RFC 8174] when, and only when, they appear in all capitals, as shown here. 2. Node MSD Advertisement The Node MSD sub-TLV is defined within the body of the IS-IS Router CAPABILITY TLV [RFC 7981] to carry the provisioned SID depth of the router originating the IS-IS Router CAPABILITY TLV. Node MSD is the smallest MSD supported by the node on the set of interfaces configured for use by the advertising IGP instance. MSD values may be learned via a hardware API or may be provisioned. 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | MSD-Type | MSD-Value | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // ................... // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | MSD-Type | MSD-Value | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 1: Node MSD Sub-TLV Type: 23 Length: variable (multiple of 2 octets); represents the total length of the Value field Value: field consists of one or more pairs of a 1-octet MSD-Type and 1-octet MSD-Value MSD-Type: value defined in the "IGP MSD-Types" registry created by the IANA Considerations section of this document Section 6 Tantsura, et al. Standards Track PAGE 4 top

RFC 8491 Signaling MSD Using IS-IS November 2018 MSD-Value: number in the range of 0-255 (for all MSD-Types, 0 represents the lack of ability to support a SID stack of any depth; any other value represents that of the node. This value MUST represent the lowest value supported by any link configured for use by the advertising IS-IS instance.) This sub-TLV is optional. The scope of the advertisement is specific to the deployment. If there exist multiple Node MSD advertisements for the same MSD-Type originated by the same router, the procedures defined in [RFC 7981] apply. These procedures may result in different MSD values being used, for example, by different controllers. This does not, however, create any interoperability issue. 3. Link MSD Advertisement The Link MSD sub-TLV is defined for TLVs 22, 23, 25, 141, 222, and 223 to carry the MSD of the interface associated with the link. MSD values may be signaled by the forwarding plane or may be provisioned. 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | MSD-Type | MSD-Value | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ // ................... // +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | MSD-Type | MSD-Value | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 2: Link MSD Sub-TLV Type: 15 Length: variable (multiple of 2 octets); represents the total length of the Value field Value: field consists of one or more pairs of a 1-octet MSD-Type and 1-octet MSD-Value MSD-Type: value defined in the "IGP MSD-Types" registry created by the IANA Considerations section of this document Section 6 Tantsura, et al. Standards Track PAGE 5 top

RFC 8491 Signaling MSD Using IS-IS November 2018 MSD-Value: number in the range of 0-255 (for all MSD-Types, 0 represents the lack of ability to support a SID stack of any depth; any other value represents that of the particular link when used as an outgoing interface.) This sub-TLV is optional. If multiple Link MSD advertisements for the same MSD-Type and the same link are received, the procedure to select which copy to use is undefined. If the advertising router performs label imposition in the context of the ingress interface, it is not possible to meaningfully advertise per-link values. In such a case, only the Node MSD SHOULD be advertised. 4. Procedures for Defining and Using Node and Link MSD Advertisements When Link MSD is present for a given MSD-Type, the value of the Link MSD MUST take precedence over the Node MSD. If a Link MSD-Type is not signaled, but the Node MSD-Type is, then the Node MSD-Type value MUST be considered to be the MSD value for that link. In order to increase flooding efficiency, it is RECOMMENDED that routers with homogenous Link MSD values advertise just the Node MSD value. The meaning of the absence of both Node and Link MSD advertisements for a given MSD-Type is specific to the MSD-Type. Generally, it can only be inferred that the advertising node does not support advertisement of that MSD-Type. In some cases, however, the lack of advertisement might imply that the functionality associated with the MSD-Type is not supported. The correct interpretation MUST be specified when an MSD-Type is defined. 5. Base MPLS Imposition MSD Base MPLS Imposition MSD (BMI-MSD) signals the total number of MPLS labels that can be imposed, including all service/transport/special labels. The absence of BMI-MSD advertisements indicates only that the advertising node does not support advertisement of this capability. Tantsura, et al. Standards Track PAGE 6 top

RFC 8491 Signaling MSD Using IS-IS November 2018 6. IANA Considerations IANA has allocated a sub-TLV type for the new sub-TLV proposed in Section 2 of this document from the "Sub-TLVs for TLV 242 (IS-IS Router CAPABILITY TLV)" registry as defined by [RFC 7981]. IANA has allocated the following value: Value Description Reference ----- --------------- ------------- 23 Node MSD This document Figure 3: Node MSD IANA has allocated a sub-TLV type as defined in Section 3 from the "Sub-TLVs for TLVs 22, 23, 25, 141, 222, and 223 (Extended IS reachability, IS Neighbor Attribute, L2 Bundle Member Attributes, inter-AS reachability information, MT-ISN, and MT IS Neighbor Attribute TLVs)" registry. IANA has allocated the following value: Value Description Reference ----- --------------- ------------- 15 Link MSD This document Figure 4: Link MSD Per-TLV information where Link MSD sub-TLV can be part of: TLV 22 23 25 141 222 223 --- -------------------- y y y y y y Figure 5: TLVs Where LINK MSD Sub-TLV Can Be Present Tantsura, et al. Standards Track PAGE 7 top

RFC 8491 Signaling MSD Using IS-IS November 2018 IANA has created an IANA-managed registry titled "IGP MSD-Types" under the "Interior Gateway Protocol (IGP) Parameters" registry to identify MSD-Types as proposed in Sections 2 and 3. The registration procedure is "Expert Review" as defined in [RFC 8126]. Types are an unsigned 8-bit number. The following values are defined by this document: Value Name Reference ----- --------------------- ------------- 0 Reserved This document 1 Base MPLS Imposition MSD This document 2-250 Unassigned 251-254 Experimental Use This document 255 Reserved This document Figure 6: MSD-Types Codepoints Registry General guidance for the designated experts is defined in [RFC 7370]. 7. Security Considerations Security considerations as specified by [RFC 7981] are applicable to this document. The advertisement of an incorrect MSD value may have negative consequences. If the value is smaller than supported, path computation may fail to compute a viable path. If the value is larger than supported, an attempt to instantiate a path that can't be supported by the head-end (the node performing the SID imposition) may occur. The presence of this information may also inform an attacker of how to induce any of the aforementioned conditions. 8. References 8.1. Normative References [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC 2119, March 1997, <https://www.rfc-editor.org/info/RFC 2119>. [RFC 3031] Rosen, E., Viswanathan, A., and R. Callon, "Multiprotocol Label Switching Architecture", RFC 3031, DOI 10.17487/RFC 3031, January 2001, <https://www.rfc-editor.org/info/RFC 3031>. Tantsura, et al. Standards Track PAGE 8 top

RFC 8491 Signaling MSD Using IS-IS November 2018 [RFC 7370] Ginsberg, L., "Updates to the IS-IS TLV Codepoints Registry", RFC 7370, DOI 10.17487/RFC 7370, September 2014, <https://www.rfc-editor.org/info/RFC 7370>. [RFC 7981] Ginsberg, L., Previdi, S., and M. Chen, "IS-IS Extensions for Advertising Router Information", RFC 7981, DOI 10.17487/RFC 7981, October 2016, <https://www.rfc-editor.org/info/RFC 7981>. [RFC 8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC 8126, June 2017, <https://www.rfc-editor.org/info/RFC 8126>. [RFC 8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC 8174, May 2017, <https://www.rfc-editor.org/info/RFC 8174>. [RFC 8402] Filsfils, C., Ed., Previdi, S., Ed., Ginsberg, L., Decraene, B., Litkowski, S., and R. Shakir, "Segment Routing Architecture", RFC 8402, DOI 10.17487/RFC 8402, July 2018, <https://www.rfc-editor.org/info/RFC 8402>. 8.2. Informative References [ELC-ISIS] Xu, X., Kini, S., Sivabalan, S., Filsfils, C., and S. Litkowski, "Signaling Entropy Label Capability and Entropy Readable Label Depth Using IS-IS", Work in Progress, draft-ietf-isis-mpls-elc-06, September 2018. [MSD-BGP] Tantsura, J., Chunduri, U., Mirsky, G., and S. Sivabalan, "Signaling MSD (Maximum SID Depth) using Border Gateway Protocol Link-State", Work in Progress, draft-ietf-idr- bgp-ls-segment-routing-msd-02, August 2018. [PCEP-EXT] Sivabalan, S., Filsfils, C., Tantsura, J., Henderickx, W., and J. Hardwick, "PCEP Extensions for Segment Routing", Work in Progress, draft-ietf-pce-segment-routing-13, October 2018. [RFC 7752] Gredler, H., Ed., Medved, J., Previdi, S., Farrel, A., and S. Ray, "North-Bound Distribution of Link-State and Traffic Engineering (TE) Information Using BGP", RFC 7752, DOI 10.17487/RFC 7752, March 2016, <https://www.rfc-editor.org/info/RFC 7752>. Tantsura, et al. Standards Track PAGE 9 top

RFC 8491 Signaling MSD Using IS-IS November 2018 Acknowledgements The authors would like to thank Acee Lindem, Ketan Talaulikar, Stephane Litkowski, and Bruno Decraene for their reviews and valuable comments. Contributors The following people contributed to this document: Peter Psenak Email: ppsenak@cisco.com Authors' Addresses Jeff Tantsura Apstra, Inc. Email: jefftant.ietf@gmail.com Uma Chunduri Huawei Technologies Email: uma.chunduri@huawei.com Sam Aldrin Google, Inc. Email: aldrin.ietf@gmail.com Les Ginsberg Cisco Systems Email: ginsberg@cisco.com Tantsura, et al. Standards Track PAGE 10 top

Signaling Maximum SID Depth (MSD) Using IS-IS RFC TOTAL SIZE: 20269 bytes PUBLICATION DATE: Wednesday, November 14th, 2018 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 8491: The IETF Trust, Wednesday, November 14th, 2018
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement