|
|
|
|
|
|
IETF RFC 8479
Storing Validation Parameters in PKCS#8
Last modified on Thursday, September 27th, 2018
 Permanent link to RFC 8479
 Search GitHub Wiki for RFC 8479
 Show other RFCs mentioning RFC 8479
Independent Submission N. Mavrogiannopoulos
Request for Comments: 8479 Red Hat
Category: Informational September 2018
ISSN: 2070-1721
Storing Validation Parameters in PKCS#8
 Abstract
This memo describes a method of storing parameters needed for
private-key validation in the Private-Key Information Syntax
Specification as defined in PKCS#8 format (RFC 5208). It is equally
applicable to the alternative implementation of the Private-Key
Information Syntax Specification as defined in RFC 5958.
The approach described in this document encodes the parameters under
a private enterprise extension and does not form part of a formal
standard.
Status of This Memo
This document is not an Internet Standards Track specification; it is
published for informational purposes.
This is a contribution to the RFC Series, independently of any other
RFC stream. The RFC Editor has chosen to publish this document at
its discretion and makes no statement about its value for
implementation or deployment. Documents approved for publication by
the RFC Editor are not candidates for any level of Internet Standard;
see Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/RFC 8479.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document.
Mavrogiannopoulos Informational PAGE 1 
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. ValidationParams Attribute . . . . . . . . . . . . . . . . . 3
3. Example Structure . . . . . . . . . . . . . . . . . . . . . . 4
4. Compatibility Notes . . . . . . . . . . . . . . . . . . . . . 4
5. Security Considerations . . . . . . . . . . . . . . . . . . . 5
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 5
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.1. Normative References . . . . . . . . . . . . . . . . . . 5
7.2. Informative References . . . . . . . . . . . . . . . . . 6
Appendix A. ASN.1 Module . . . . . . . . . . . . . . . . . . . . 7
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 8
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 8
Mavrogiannopoulos Informational PAGE 2
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
1. Introduction
RSA or DSA private keys generated using the Shawe-Taylor prime
generation algorithm described in [FIPS186-4] allow for parameter
validation, i.e., they verify whether the primes are actually prime
and were correctly generated. That is done by generating the
parameters from a known seed and a selected hash algorithm.
Storing these parameters in a private-key format such as the RSA
Private-Key Syntax from PKCS#1 [RFC 8017] or common representations
for DSA private keys does not allow information needed for validation
to be attached to the parameters. The purpose of this document is to
describe such a method using the Private-Key Information Syntax
Specification as defined in [RFC 5208] and the alternative
specification described in [RFC 5958].
The approach described in this document encodes the parameters under
a private enterprise extension and does not form part of a formal
standard. The encoding can be used as is or as the basis for a
standard at a later time.
2. ValidationParams Attribute
The information related to the validation parameters is stored as an
attribute in the PrivateKeyInfo structure. The attribute is
identified by the id-attr-validation-parameters object identifier and
contains as AttributeValue a single ValidationParams structure.
id-attr-validation-parameters OBJECT IDENTIFIER ::=
{1 3 6 1 4 1 2312 18 8 1}
ValidationParams ::= SEQUENCE {
hashAlgo OBJECT IDENTIFIER,
seed OCTET STRING
}
The algorithm identifier in ValidationParams should be a hash
algorithm identifier for the methods described in [FIPS186-4]. The
ValidationParams sequence must be DER encoded [ITU-T-X690].
Mavrogiannopoulos Informational PAGE 3
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
3. Example Structure
The following structure contains an RSA key generated using the
algorithm from Section B.3.3 of [FIPS186-4], with SHA2-384 hash. The
seed used is
8af4328c87bebcec31e303b8f5537effcb6a91d947084d99a369823b36f01462 (hex
encoded).
-----BEGIN PRIVATE KEY-----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-----END PRIVATE KEY-----
4. Compatibility Notes
For compatibility, it is recommended that implementations following
this document support generation and validation using the SHA2-384
hash algorithm.
The extension defined in this document is applicable both to the
Private-Key Information Syntax Specification (PKCS#8) [RFC 5208] and
to Asymmetric Key Packages [RFC 5958].
Mavrogiannopoulos Informational PAGE 4
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
5. Security Considerations
All the considerations in [RFC 5208] and [RFC 5958] apply.
6. IANA Considerations
This document has no IANA actions.
7. References
7.1. Normative References
[FIPS186-4]
National Institute of Standards and Technology, "Digital
Signature Standard (DSS)", FIPS PUB 186-4,
DOI 10.6028/NIST.FIPS.186-4, July 2013.
[ITU-T-X680]
International Telecommunication Union, "Abstract Syntax
Notation One (ASN.1): Specification of basic notation",
ITU-T Recommendation X.680, July 2002,
<https://www.itu.int/ITU-T/studygroups/com17/languages/
X.680-0207.pdf>.
[ITU-T-X690]
International Telecommunication Union, "ASN.1 encoding
rules: Specification of Basic Encoding Rules (BER),
Canonical Encoding Rules (CER) and Distinguished Encoding
Rules (DER)", ITU-T Recommendation X.690, July 2002,
<https://www.itu.int/ITU-T/studygroups/com17/languages/
X.690-0207.pdf>.
[RFC 5208] Kaliski, B., "Public-Key Cryptography Standards (PKCS) #8:
Private-Key Information Syntax Specification Version 1.2",
RFC 5208, DOI 10.17487/RFC 5208, May 2008,
<https://www.rfc-editor.org/info/RFC 5208>.
[RFC 5958] Turner, S., "Asymmetric Key Packages", RFC 5958,
DOI 10.17487/RFC 5958, August 2010,
<https://www.rfc-editor.org/info/RFC 5958>.
Mavrogiannopoulos Informational PAGE 5
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
7.2. Informative References
[RFC 5912] Hoffman, P. and J. Schaad, "New ASN.1 Modules for the
Public Key Infrastructure Using X.509 (PKIX)", RFC 5912,
DOI 10.17487/RFC 5912, June 2010,
<https://www.rfc-editor.org/info/RFC 5912>.
[RFC 8017] Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch,
"PKCS #1: RSA Cryptography Specifications Version 2.2",
RFC 8017, DOI 10.17487/RFC 8017, November 2016,
<https://www.rfc-editor.org/info/RFC 8017>.
Mavrogiannopoulos Informational PAGE 6
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
Appendix A. ASN.1 Module
This appendix provides non-normative ASN.1 definitions for the
structures described in this specification using ASN.1 as defined in
[ITU-T-X680] and [RFC 5912].
PrivateKeyValidationAttrV1
{ iso(1) identified-organization(3) dod(6) internet(1)
private(4) enterprise(1) 2312 18 1 1 }
DEFINITIONS IMPLICIT TAGS ::=
BEGIN
-- EXPORTS ALL
IMPORTS
ATTRIBUTE
FROM PKIX-CommonTypes-2009 -- [RFC 5912]
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-pkixCommon-02(57) } ;
-- PrivateKeyInfo is defined in [RFC 5208].
-- This definition adds the validation parameters attribute
-- to the set of allowed attributes.
PrivateKeyInfo ATTRIBUTE ::= {
at-validation-parameters, ... }
at-validation-parameters ATTRIBUTE ::= {
TYPE ValidationParams
IDENTIFIED BY id-attr-validation-parameters }
id-attr-validation-parameters OBJECT IDENTIFIER ::=
{ 1 3 6 1 4 1 2312 18 8 1 }
ValidationParams ::= SEQUENCE {
hashAlg OBJECT IDENTIFIER,
seed OCTET STRING }
END
Mavrogiannopoulos Informational PAGE 7
RFC 8479 Storing Validation Parameters in PKCS#8 September 2018
Acknowledgements
The author would like to thank Russ Housley for his comments and the
ASN.1 module appendix.
Author's Address
Nikos Mavrogiannopoulos
Red Hat, Inc.
Brno
Czech Republic
Email: nmav@redhat.com
Mavrogiannopoulos Informational PAGE 8
Storing Validation Parameters in PKCS#8
RFC TOTAL SIZE: 11946 bytes
PUBLICATION DATE: Thursday, September 27th, 2018
LEGAL RIGHTS: The IETF Trust (see BCP 78)
|
