The RFC Archive
 The RFC Archive   RFC 6007   « Jump to any RFC number directly 
 RFC Home
Full RFC Index
Recent RFCs
RFC Standards
Best Current Practice
RFC Errata
1 April RFC



IETF RFC 6007

Use of the Synchronization VECtor (SVEC) List for Synchronized Dependent Path Computations

Last modified on Tuesday, September 21st, 2010

Permanent link to RFC 6007
Search GitHub Wiki for RFC 6007
Show other RFCs mentioning RFC 6007







Internet Engineering Task Force (IETF)                       I. Nishioka
Request for Comments: 6007                                     NEC Corp.
Category: Informational                                        D. King
ISSN: 2070-1721                                       Old Dog Consulting
                                                          September 2010


           Use of the Synchronization VECtor (SVEC) List for
                Synchronized Dependent Path Computations

 Abstract

   A Path Computation Element (PCE) may be required to perform dependent
   path computations.  Dependent path computations are requests that
   need to be synchronized in order to meet specific objectives.  An
   example of a dependent request would be a PCE computing a set of
   services that are required to be diverse (disjointed) from each
   other.  When a PCE computes sets of dependent path computation
   requests concurrently, use of the Synchronization VECtor (SVEC) list
   is required for association among the sets of dependent path
   computation requests.  The SVEC object is optional and carried within
   the Path Computation Element Communication Protocol (PCEP) PCRequest
   (PCReq) message.

   This document does not specify the PCEP SVEC object or procedure.
   This informational document clarifies the use of the SVEC list for
   synchronized path computations when computing dependent requests.
   The document also describes a number of usage scenarios for SVEC
   lists within single-domain and multi-domain environments.

 Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/RFC 6007.






Nishioka & King               Informational                  PAGE 1 top


RFC 6007 SVEC List for Path Computations September 2010 Copyright Notice Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Nishioka & King Informational PAGE 2 top

RFC 6007 SVEC List for Path Computations September 2010 Table of Contents 1. Introduction ....................................................3 1.1. SVEC Object ................................................4 1.2. Application of SVEC Lists ..................................5 2. Terminology .....................................................6 3. SVEC Association Scenarios ......................................7 3.1. Synchronized Computation for Diverse Path Requests .........7 3.2. Synchronized Computation for Point-to-Multipoint Path Requests ..............................................8 4. SVEC Association ................................................9 4.1. SVEC List ..................................................9 4.2. Associated SVECs ...........................................9 4.3. Non-Associated SVECs ......................................10 5. Processing of SVEC List ........................................10 5.1. Single-PCE, Single-Domain Environments ....................10 5.2. Multi-PCE, Single-Domain Environments .....................11 5.3. Multi-PCE, Multi-Domain Environments ......................11 6. End-to-End Diverse Path Computation ............................13 6.1. Disjoint VSPT .............................................13 6.2. Disjoint VSPT Encoding ....................................14 6.3. Path Computation Procedure ................................15 7. Manageability Considerations ...................................15 7.1. Control of Function and Policy ............................15 7.2. Information and Data Models (MIB Modules) .................15 7.3. Liveness Detection and Monitoring .........................15 7.4. Verifying Correct Operation ...............................15 7.5. Requirements on Other Protocols and Functional Components ................................................16 7.6. Impact on Network Operation ...............................16 8. Security Considerations ........................................16 9. References .....................................................16 9.1. Normative References ......................................16 9.2. Informative References ....................................17 10. Acknowledgements ..............................................18 1. Introduction [RFC 5440] describes the specifications for the Path Computation Element Communication Protocol (PCEP). PCEP specifies the communication between a Path Computation Client (PCC) and a Path Computation Element (PCE), or between two PCEs based on the PCE architecture [RFC 4655]. PCEP interactions include path computation requests and path computation replies. The PCE may be required to compute independent and dependent path requests. Path computation requests are said to be independent if they are not related to each other and therefore not required to be Nishioka & King Informational PAGE 3 top

RFC 6007 SVEC List for Path Computations September 2010 synchronized. Conversely, a set of dependent path computation requests is such that their computations cannot be performed independently of each other, and the requests must be synchronized. The Synchronization VECtor (SVEC) with a list of the path computation request identifiers carried within the request message allows the PCC or PCE to specify a list of multiple path computation requests that must be synchronized. Section 1.1 ("SVEC Object") describes the SVEC object. Section 1.2 ("Application of SVEC Lists") describes the application of SVEC lists in certain scenarios. This informational document clarifies the handling of dependent and synchronized path computation requests, using the SVEC list, based on the PCE architecture [RFC 4655] and PCEP [RFC 5440]. The document also describes a number of usage scenarios for SVEC lists within single- domain and multi-domain environments. This document is not intended to specify the procedure when using SVEC lists for dependent and synchronized path computation requests. 1.1. SVEC Object When a PCC or PCE sends path computation requests to a PCE, a PCEP Path Computation Request (PCReq) message may carry multiple requests, each of which has a unique path computation request identifier. The SVEC with a list of the path computation request identifiers carried within the request message allows the PCC or PCE to specify a list of multiple path computation requests that must be synchronized, and also allows the specification of any dependency relationships between the paths. The path computation requests listed in the SVEC must be handled in a specific relation to each other (i.e., synchronized). [RFC 5440] defines two synchronous path computation modes for dependent or independent path computation requests specified by the dependency flags (i.e., Node, Link, or Shared Risk Link Group (SRLG) diverse flags) in the SVEC: o A set of independent and synchronized path computation requests. o A set of dependent and synchronized path computation requests. See [RFC 5440] for more details on dependent, independent, and synchronous path computation. These computation modes are exclusive to each other in a single SVEC. If one of the dependency flags in a SVEC is set, it indicates that a set of synchronous path computation requests has a dependency and does not allow any other path computation requests. In order to be synchronized with other path computation requests with a dependency, it is necessary to associate them. Nishioka & King Informational PAGE 4 top

RFC 6007 SVEC List for Path Computations September 2010 The aim of the SVEC object carried within a PCReq message is to request the synchronization of M path computation requests. Each path computation request is uniquely identified by the Request-ID- number carried within the respective Request Parameters (RP) object. The SVEC object also contains a set of flags that specify the synchronization type. The SVEC object is defined in Section 7.13 ("SVEC Object") of [RFC 5440]. 1.2. Application of SVEC Lists It is important for the PCE, when performing path computations, to synchronize any path computation requests with a dependency. For example, consider two protected end-to-end services: o It would be beneficial for each back-up path to be disjointed so they do not share the same links and nodes as the working path. o Two diverse path computation requests would be needed to compute the working and disjointed protected paths. If the diverse path requests are computed sequentially, fulfillment of the initial diverse path computation without consideration of the second diverse path computation and disjoint constraint may result in the PCE either providing sub-optimal path disjoint results for the protected path or failing to meet the end-to-end disjoint requirement altogether. Additionally, SVEC can be applied to end-to-end diverse path computations that traverse multiple domains. [RFC 5441] describes two approaches, synchronous (i.e., simultaneous) and 2-step approaches, for end-to-end diverse path computation across a chain of domains. The path computation procedure is specified for the 2-step approaches in [RFC 5521], but no guidelines are provided for the synchronous approach described in this document. The following scenarios are specifically described within this document: o Single-domain, single-PCE, dependent and synchronized path computation request. o Single-domain, multi-PCE, dependent and synchronized path request. o Multi-domain, dependent and synchronized path computation request, including end-to-end diverse path computation. Nishioka & King Informational PAGE 5 top

RFC 6007 SVEC List for Path Computations September 2010 The association among multiple SVECs for multiple sets of synchronized dependent path computations is also described in this document, as well as the disjoint Virtual Shortest Path Tree (VSPT) encoding rule for end-to-end diverse path computation across domains. Path computation algorithms for these path computation scenarios are out of the scope of this document. The clarifications and use cases in this document are applicable to the Global Concurrent Optimization (GCO) path computation mechanism specified in [RFC 5557]. The GCO application provides the capability to optimize a set of services within the network, in order to maximize efficient use of network resources. A single objective function (OF) or a set of OFs can be applied to a GCO. To compute a set of such traffic-engineered paths for the GCO application, PCEP supports the synchronous and dependent path computation requests required in [RFC 4657]. The SVEC association and the disjoint VSPT described in this document do not require any extension to PCEP messages and object formats, when computing a GCO for multiple or end-to-end diverse paths. In addition, the use of multiple SVECs is not restricted to only SRLG, node, and link diversity currently defined in the SVEC object [RFC 5440], but is also available for other dependent path computation requests. The SVEC association and disjoint VSPT are available to both single- PCE path computation and multi-PCE path computation. 2. Terminology This document uses PCE terminology defined in [RFC 4655], [RFC 4875], and [RFC 5440]. Associated SVECs: A group of multiple SVECs (Synchronization VECtors), defined in this document, to indicate a set of synchronized or concurrent path computations. Disjoint VSPT: A set of VSPTs, defined in this document, to indicate a set of virtual diverse path trees. GCO (Global Concurrent Optimization): A concurrent path computation application, defined in [RFC 5557], where a set of traffic engineered (TE) paths is computed concurrently in order to efficiently utilize network resources. Nishioka & King Informational PAGE 6 top

RFC 6007 SVEC List for Path Computations September 2010 Synchronized: Describes a set of path computation requests that the PCE associates and that the PCE does not compute independently of each other. VSPT: Virtual Shortest Path Tree, defined in [RFC 5441]. 3. SVEC Association Scenarios This section clarifies several path computation scenarios in which SVEC association can be applied. Also, any combination of scenarios described in this section could be applicable. 3.1. Synchronized Computation for Diverse Path Requests A PCE may compute two or more point-to-point diverse paths concurrently, in order to increase the probability of meeting primary and secondary path diversity (or disjointness) objectives and network resource optimization objectives. Two scenarios can be considered for the SVEC association of point-to- point diverse paths. o Two or more end-to-end diverse paths When concurrent path computation of two or more end-to-end diverse paths is requested, SVEC association is needed among diverse path requests. Note here that each diverse path request consists of primary, secondary, and tertiary (and beyond) path requests, in which all path requests are grouped with one SVEC association. Consider two end-to-end services that are to be kept separate by using diverse paths. The path computation requests would need to be associated so that diversity could be assured. Consider further that each of these services requires a backup path that can protect against any failure in the primary path. These backup paths must be computed using requests that are associated with the primary paths, giving rise to a set of four associated requests. o End-to-end primary path and its segmented secondary paths When concurrent path computation for segment recovery paths, as shown in Figure 1, is requested, SVEC association is needed between a primary path and several segmented secondary paths. Nishioka & King Informational PAGE 7 top

RFC 6007 SVEC List for Path Computations September 2010 <------------ primary -----------> A------B------C---D------E------F \ / \ / P---Q---R X---Y---Z <--secondary1--> <--secondary2--> Figure 1. Segment Recovery Paths In this scenario, we assume that the primary path may be pre-computed and used for specifying the segment for secondary paths. Otherwise, the segment for secondary path requests is specified in advance, by using Exclude Route Object (XRO) and/or Include Route Object (IRO) constraints in the primary request. 3.2. Synchronized Computation for Point-to-Multipoint Path Requests For point-to-multipoint path requests, SVEC association can be applied. o Two or more point-to-multipoint paths If a point-to-multipoint path computation request is represented as a set of point-to-point paths [RFC 6006], two or more point-to- multipoint path computation requests can be associated for concurrent path computation, in order to optimize network resources. o Point-to-multipoint paths and their secondary paths When concurrent path computation of a point-to-multipoint path and its point-to-point secondary paths [RFC 4875], or a point-to- multipoint path and its point-to-multipoint secondary paths is requested, SVEC association is needed among these requests. In this scenario, we use the same assumption as the "end-to-end primary path and its segmented secondary paths" scenario in Section 3.1. Nishioka & King Informational PAGE 8 top

RFC 6007 SVEC List for Path Computations September 2010 4. SVEC Association This section describes the associations among SVECs in a SVEC list. 4.1. SVEC List PCEP provides the capability to carry one or more SVEC objects in a PCReq message, and this set of SVEC objects within the PCReq message is termed a SVEC list. Each SVEC object in the SVEC list contains a distinct group of path computation requests. When requesting association among such distinct groups, associated SVECs described in this document are used. 4.2. Associated SVECs "Associated SVECs" means that there are relationships among multiple SVECs in a SVEC list. Note that there is no automatic association in [RFC 5440] between the members of one SVEC and the members of another SVEC in the same SVEC list. The associated SVEC is introduced to associate these SVECs, especially for correlating among SVECs with dependency flags. Request identifiers in the SVEC objects are used to indicate the association among SVEC objects. If the same request-IDs exist in SVEC objects, this indicates these SVEC objects are associated. When associating among SVEC objects, at least one request identifier must be shared between associated SVECs. The SVEC objects can be associated regardless of the dependency flags in each SVEC object, but it is recommended to use a single SVEC if the dependency flags are not set in all SVEC objects. Similarly, when associating among SVEC objects with dependency flags, it is recommended to construct them using a minimum set of associated SVECs, thus avoiding complex relational associations. Below is an example of associated SVECs. In this example, the first SVEC is associated with the other SVECs, and all of the path computation requests contained in the associated SVECs (i.e., Request-IDs #1, #2, #3, #4, #X, #Y, and #Z) must be synchronized. <SVEC-list> <SVEC> without dependency flags Request-ID #1, Request-ID #3, Request-ID #X <SVEC> with one or more dependency flags Request-ID #1, Request-ID #2 Nishioka & King Informational PAGE 9 top

RFC 6007 SVEC List for Path Computations September 2010 <SVEC> with one or more dependency flags Request-ID #3, Request-ID #4 <SVEC> without dependency flag Request-ID #X, Request-ID #Y, Request-ID #Z 4.3. Non-Associated SVECs "Non-associated SVECs" means that there are no relationships among SVECs. If none of the SVEC objects in the SVEC list on a PCReq message contains a common request-ID, there is no association between the SVECs and so no association between the requests in one SVEC and the requests in another SVEC. Below is an example of non-associated SVECs that do not contain any common request-IDs. <SVEC-list> <SVEC> with one or more dependency flags Request-ID #1, Request-ID #2 <SVEC> with one or more dependency flags Request-ID #3, Request-ID #4 <SVEC> without dependency flags Request-ID #X, Request-ID #Y, Request-ID #Z 5. Processing of SVEC List 5.1. Single-PCE, Single-Domain Environments In this environment, there is a single PCE within the domain. When a PCE receives PCReq messages with more than one SVEC object in the SVEC list, PCEP has to first check the request-IDs in all SVEC objects in order to identify any associations among them. If there are no matching request-IDs in the different SVEC objects, these SVEC objects are not associated, and then each set of path computation requests in the non-associated SVEC objects has to be computed separately. Nishioka & King Informational PAGE 10 top

RFC 6007 SVEC List for Path Computations September 2010 If there are matching request-IDs in the different SVEC objects, these SVEC objects are associated, and then all path computation requests in the associated SVEC objects are treated in a synchronous manner for GCO application. If a PCE that is unable to handle the associated SVEC finds the common request-IDs in multiple SVEC objects, the PCE should cancel the path computation request and respond to the PCC with the PCErr message Error-Type="Capability not supported". In the case that M path computation requests are sent across multiple PCReq messages, the PCE may start a SyncTimer as recommended in Section 7.13.3 ("Handling of the SVEC Object") of [RFC 5440]. In this case, the associated SVECs should also be handled as described in [RFC 5440], i.e., after receiving the entire set of M path computation requests associated by SVECs, the computation should start at one. If the SyncTimer has expired or the subsequent PCReq messages are malformed, the PCE should cancel the path computation request and respond to the PCC with the relevant PCErr message. 5.2. Multi-PCE, Single-Domain Environments There are multiple PCEs in a domain, to which PCCs can communicate directly, and PCCs can choose an appropriate PCE for load-balanced path computation requests. In this environment, it is possible that dependent path computation requests are sent to different PCEs. However, if a PCC sends path computation requests to a PCE, and then sends a further path computation request to a different PCE using the SVEC list to show that the further request is dependent on the first requests, there is no method for the PCE to correlate the dependent requests sent to different PCEs. No SVEC object correlation function between the PCEs is specified in [RFC 5440]. No mechanism exists to resolve this problem, and the issue is open for future study. Therefore, a PCC must not send dependent path computation requests associated by SVECs to different PCEs. 5.3. Multi-PCE, Multi-Domain Environments In this environment, there are multiple domains in which PCEs are located in each domain, and end-to-end dependent paths (i.e., diverse paths) are computed using multiple PCEs. Note that we assume a chain of PCEs is predetermined and the Backward-Recursive PCE-Based Computation (BRPC) procedure [RFC 5441] is in use. The SVECs can be applied to end-to-end diverse path computations that traverse multiple domains. [RFC 5441] describes two approaches, synchronous (i.e., simultaneous) and 2-step approaches, for Nishioka & King Informational PAGE 11 top

RFC 6007 SVEC List for Path Computations September 2010 end-to-end diverse path computation across a chain of domains. In the 2-step approaches described in [RFC 5521], it is not necessary to use the associated SVECs if any of the dependency flags in a SVEC object are not set. On the other hand, the simultaneous approach may require the associated SVEC because at least one of the dependency flags is required to be set in a SVEC object. Thus, a use case of the simultaneous approach is described in this environment. When a chain of PCEs located in separate domains is used for simultaneous path computations, additional path computation processing is required, as described in Section 6 of this document. If the PCReq message contains multiple associated SVEC objects and these SVEC objects contain path computation requests that will be sent to the next PCE along the path computation chain, the following procedures are applied. When a chain of PCEs is a unique sequence for all of the path computation requests in a PCReq message, it is not necessary to reconstruct associations among SVEC objects. Thus, the PCReq message is passed to the tail-end PCE. When a PCReq message contains more than one SVEC object with the dependency flag set, the contained SVECs may then be associated. PCEs receiving the associated SVECs must maintain their association and must consider their relationship when performing path computations after receiving a corresponding PCReply (PCRep) message. When a chain of PCEs is different, it is required that intermediate PCEs receiving such PCReq messages may reconstruct associations among SVEC objects, and then send PCReq messages to corresponding PCEs located in neighboring domains. If the associated SVECs are reconstructed at the intermediate PCE, the PCE must not start its path computation until all PCRep messages have been received from all neighbor PCEs. However, a complex PCE implementation is required for SVEC reconstruction, and waiting mechanisms must be implemented. Therefore, it is not recommended to associate path computation requests with different PCE chains. This is an open issue and is currently being discussed in [H-PCE], which proposes a hierarchical PCE architecture. Nishioka & King Informational PAGE 12 top

RFC 6007 SVEC List for Path Computations September 2010 6. End-to-End Diverse Path Computation In this section, the synchronous approach is provided to compute primary and secondary paths simultaneously. 6.1. Disjoint VSPT The BRPC procedure constructs a VSPT to inform the enquiring PCE of potential paths to the destination node. In the end-to-end diverse path computation, diversity (or disjointness) information among the potential paths must be preserved in the VSPT to ensure an end-to-end disjoint path. In order to preserve diversity (or disjointness) information, disjoint VSPTs are sent in the PCEP PCRep message. The PCReq containing a SVEC object with the appropriate diverse flag set would signal that the PCE should compute a disjoint VSPT. A definition of the disjoint VSPT is a collection of VSPTs, in which each VSPT contains a potential set of primary and secondary paths. Figure 2 shows an example network. Here, transit nodes in domains are not depicted, and PCE1 and PCE2 may be located in border nodes. In this network, there are three VSPTs for the potential set of diverse paths, shown in Figure 3, when the primary path and secondary path are requested from S1 to D1. These VSPTs consist of a disjoint VSPT, which is indicated in a PCRep to PCE1. When receiving the disjoint VSPT, PCE1 recognizes the disjoint request and disjoint VSPT information. PCE1 will then continue to process the request and compute the diverse path using the BRPC procedure [RFC 5441]. Encoding for the disjoint VSPT is described in Section 6.2. Domain1 Domain2 +----------+ +----------+ | PCE1 | | PCE2 | S1: Source node | BN1---BN4 | D1: Destination node | S1 BN2---BN5 D1 | BN1-BN6: Border nodes | BN3---BN6 | +----------+ +----------+ Figure 2. Example Network for Diverse Path Computation Nishioka & King Informational PAGE 13 top

RFC 6007 SVEC List for Path Computations September 2010 VSPT1: VSPT2: VSPT3: D1 D1 D1 / \ / \ / \ BN4 BN5 BN4 BN6 BN5 BN6 Figure 3. Disjoint VSPTs from PCE2 to PCE1 6.2. Disjoint VSPT Encoding Encoding for the disjoint VSPT follows the definition of PCEP message encoding in [RFC 5440]. The PCEP PCRep message returns a disjoint VSPT as <path list> for each RP object (Request Parameter object). The order of <path> in <path list> among <responses> implies a set of primary Explicit Route Objects (EROs) and secondary EROs. A PCE sending a PCRep with a disjoint VSPT can reply with a partial disjoint VSPT based on its network operation policy, but the order of <path> in <path list> must be aligned correctly. If confidentiality is required between domains, the path key mechanism defined in [RFC 5520] is used for a disjoint VSPT. Below are the details of the disjoint VSPT encoding (in Figure 3), when a primary path and a secondary path are requested from S1 to D1. o Request ID #1 (Primary) - ERO1 BN4(TE route ID)- ...-D1(TE-Router ID) [for VSPT1] - ERO2 BN4(TE route ID)- ...-D1(TE-Router ID) [for VSPT2] - ERO3 BN5(TE route ID)- ...-D1(TE-Router ID) [for VSPT3] o Request ID #2 (Secondary) - ERO4 BN5(TE route ID)- ...-D1(TE-Router ID) [for VSPT1] - ERO5 BN6(TE route ID)- ...-D1(TE-Router ID) [for VSPT2] - ERO6 BN6(TE route ID)- ...-D1(TE-Router ID) [for VSPT3] Nishioka & King Informational PAGE 14 top

RFC 6007 SVEC List for Path Computations September 2010 6.3. Path Computation Procedure For end-to-end diverse path computation, the same mode of operation as that of the BRPC procedure can be applied (i.e., Step 1 to Step n in Section 4.2 of [RFC 5441]). A question that must be considered is how to recognize disjoint VSPTs. The recognition of disjoint VSPTs is achieved by the PCE sending a PCReq to its neighbor PCE, which maintains the path computation request (PCReq) information. If the PCReq has one or more SVEC object(s) with the appropriate dependency flags, the received PCRep will contain the disjoint VSPT. If not, the received VSPT is a normal VSPT based on the shortest path computation. Note that the PCE will apply a suitable algorithm for computing requests with disjoint VSPTs. The selection and application of the appropriate algorithm is out of scope in this document. 7. Manageability Considerations This section describes manageability considerations specified in [PCE-MNG-REQS]. 7.1. Control of Function and Policy In addition to [RFC 5440], PCEP implementations should allow the PCC to be responsible for mapping the requested paths to computation requests. The PCC should construct the SVECs to identify and associate SVEC relationships. 7.2. Information and Data Models (MIB Modules) There are currently no additional parameters for MIB modules. There would be value in a MIB module that details the SVEC association. This work is currently out of scope of this document. 7.3. Liveness Detection and Monitoring The associated SVEC in this document allows PCEs to compute optimal sets of diverse paths. This type of path computation may require more time to obtain its results. Therefore, it is recommended for PCEP to support the PCE monitoring mechanism specified in [RFC 5886]. 7.4. Verifying Correct Operation [RFC 5440] provides a sufficient description for this document. There are no additional considerations. Nishioka & King Informational PAGE 15 top

RFC 6007 SVEC List for Path Computations September 2010 7.5. Requirements on Other Protocols and Functional Components This document does not require any other protocol and functional components. 7.6. Impact on Network Operation [RFC 5440] provides descriptions for the mechanisms discussed in this document. There is value in considering that large associated SVECs will require greater PCE resources, compared to non-associated SVECs. Additionally, the sending of large associated SVECs within multiple PCReq messages will require more network resources. Solving these specific issues is out of scope of this document. 8. Security Considerations This document describes the usage of the SVEC list, and does not have any extensions for PCEP. The security of the procedures described in this document depends on PCEP [RFC 5440]. However, a PCE that supports associated SVECs may be open to Denial-of-Service (DoS) attacks from a rogue PCC. A PCE may be made to queue large numbers of requests waiting for other requests that will never arrive. Additionally, a PCE might be made to compute exceedingly complex associated SVEC computations. These DoS attacks may be mitigated with the use of practical SVEC list limits, as well as: o Applying provisioning to PCEs, e.g., for a given number of simultaneous services (recommended). o Using a priority-based multi-queuing mechanism in which path computation requests with a smaller SVEC list are prioritized for path computation processing. o Specifying which PCCs may request large SVEC associations through PCE access policy control. 9. References 9.1. Normative References [RFC 4655] Farrel, A., Vasseur, J.-P., and J. Ash, "A Path Computation Element (PCE)-Based Architecture", RFC 4655, August 2006. [RFC 4657] Ash, J., Ed., and J. Le Roux, Ed., "Path Computation Element (PCE) Communication Protocol Generic Requirements", RFC 4657, September 2006. Nishioka & King Informational PAGE 16 top

RFC 6007 SVEC List for Path Computations September 2010 [RFC 4875] Aggarwal, R., Ed., Papadimitriou, D., Ed., and S. Yasukawa, Ed., "Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to- Multipoint TE Label Switched Paths (LSPs)", RFC 4875, May 2007. [RFC 5440] Vasseur, JP., Ed., and JL. Le Roux, Ed., "Path Computation Element (PCE) Communication Protocol (PCEP)", RFC 5440, March 2009. [RFC 5441] Vasseur, JP., Ed., Zhang, R., Bitar, N., and JL. Le Roux, "A Backward-Recursive PCE-Based Computation (BRPC) Procedure to Compute Shortest Constrained Inter-Domain Traffic Engineering Label Switched Paths", RFC 5441, April 2009. [RFC 5520] Bradford, R., Ed., Vasseur, JP., and A. Farrel, "Preserving Topology Confidentiality in Inter-Domain Path Computation Using a Path-Key-Based Mechanism", RFC 5520, April 2009. [RFC 5521] Oki, E., Takeda, T., and A. Farrel, "Extensions to the Path Computation Element Communication Protocol (PCEP) for Route Exclusions", RFC 5521, April 2009. [RFC 5557] Lee, Y., Le Roux, JL., King, D., and E. Oki, "Path Computation Element Communication Protocol (PCEP) Requirements and Protocol Extensions in Support of Global Concurrent Optimization", RFC 5557, July 2009. 9.2. Informative References [H-PCE] King, D., Ed., and A. Farrel, Ed., "The Application of the Path Computation Element Architecture to the Determination of a Sequence of Domains in MPLS & GMPLS", Work in Progress, December 2009. [PCE-MNG-REQS] Farrel, A., "Inclusion of Manageability Sections in PCE Working Group Drafts", Work in Progress, July 2009. [RFC 5886] Vasseur, JP., Ed., Le Roux, JL., and Y. Ikejiri, "A Set of Monitoring Tools for Path Computation Element (PCE)-Based Architecture", RFC 5886, June 2010. Nishioka & King Informational PAGE 17 top

RFC 6007 SVEC List for Path Computations September 2010 [RFC 6006] Zhao, Q., Ed., King, D., Ed., Verhaeghe, F., Takeda, T., Ali, Z., and J. Meuric, "Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths", RFC 6006, September 2010. 10. Acknowledgements The authors would like to thank Adrian Farrel, Julien Meuric, and Filippo Cugini for their valuable comments. Authors' Addresses Itaru Nishioka NEC Corp. 1753 Shimonumabe, Kawasaki, 211-8666, Japan Phone: +81 44 396 3287 EMail: i-nishioka@cb.jp.nec.com Daniel King Old Dog Consulting United Kingdom Phone: +44 7790 775187 EMail: daniel@olddog.co.uk Nishioka & King Informational PAGE 18 top

Use of the Synchronization VECtor (SVEC) List for Synchronized Dependent Path Computations RFC TOTAL SIZE: 39156 bytes PUBLICATION DATE: Tuesday, September 21st, 2010 LEGAL RIGHTS: The IETF Trust (see BCP 78)


RFC-ARCHIVE.ORG

© RFC 6007: The IETF Trust, Tuesday, September 21st, 2010
© the RFC Archive, 2024, RFC-Archive.org
Maintainer: J. Tunnissen

Privacy Statement